2Wire Security Issues
My problems has been ongoing since December...
Hardware Overview:
Machine Name: PowerBook G4 15"
Machine Model: PowerBook5,6
CPU Type: PowerPC G4 (1.2)
Number Of CPUs: 1
CPU Speed: 1.5 GHz
L2 Cache (per CPU): 512 KB
Memory: 512 MB
Bus Speed: 167 MHz
Boot ROM Version: 4.9.1f3
System Software Overview:
System Version: Mac OS X 10.4 (8A451)
Kernel Version: Darwin 8.0.0
First symptoms:
Java Plug-in ran using JRE version 1.5.0_07 Java HotSpot(TM) ran while I was writing something in my notebook (not touching computer at all). that loaded direct proxy configuration from Netscape Navigator (which I didn't know was even on my computer). It enabled cache, hotkey's???, added referencing classloader, progress listener: GrayBoxPainter applet...'s, connecting directly to www.mmmdjs.com/fphoverx.class with proxy=DIRECT., removed GrayBoxPainter, etc.
IS THIS A NORMAL SOFTWARE UPDATE AS MAC PRO-CARE SUPPORT SAID IT PROBABLY IS?
I don't know much about the technical stuff, but I have always kept an eye on my console logs and activities. Things were wierd, so I dis-connected all internet connections, and turned off 2wire modem. I did have a home network through my Gateway PC using the 2wire. SBC said I had to do it that way in order to be able to print wirelessly from my Mac and share the same internet connection as the Gateway, so I purchased router from them. I had antivirus software on Gateway, used good passwords, had firewall enabled on my Mac with good passwords enabled wherever possible. SBC instructed my on how to install, & connected w/WEP password. Soon after, lots of odd things started happening.
Noticed other users on my home networking 2WIRE page. Settings kept changing, firewall was deselected sometimes even though I had set it the day before. My mail program on Mac started acting wierd. A folder I didn't create was in my TRASH and all my mail was re-directed through that folder. Couldn't access any of it for a few days...the mysteriously it would re-appear.
HD icon on desktop was re-named (almost what it was, but extra character).
Had automatic update updates set up, but wasn't enabled when I went to check what updates had been installed.Network Icon appeared in Finder, clicked on GET INFO: Alias from /Network, Server showed nfs://automount something...modified that day. I had read-only permissions. System Logs bursting, unknown drivers installed, options not available, network settings constantly changing, ports opened for bluetooth, Host Controller location & Drivers installed, Apple-Remote Desktop enabled as soon as I disabled.
Called 2WIRE, hard-re-set & changed all settings and passwords on router. Disabled Wireless setting on router.
GATEWAY PC is affected too. Multiple issues too, pretty much same things but from windows. Haven't turned on Gateway PC either, it is affected and to. Icon showed connected, data is going out, but browser won't let me on. Haven't even turned on since.
Noticed another partition in Disk Utility? Called Apple, as they advised, backed up with external HD & re-installed using disks. Problems NOT gone. Did erase and install, tried zero'ing out disk, didn't help. Noticed wierd iTunes script ran even before I created my account. Apple said that was normal, even though I hadn't ever seen that happen before.
Called Apple, did another re-install. No luck. Product Specialist sent Data Capture, ran and sent back. They requested another for more info. Never was given results of that scan. Advised me to bring in for HD replacement. Apple replaced hd, everything was find, secured using Security pdf apple sent me. Problems started happening soon after plugged my router power on??? Don't remember exact order, but I know it was before I directly connected through Built-in Ethernet cable.
I could go on and on. I don't know how to fix this!!! "Support" doesn't seem to ever take me seriously, even after replacing my HD and the problem coming back. Perhaps the 2WIRE is the unresolved problem? Just my guess, don't know how or why. I took snapshots of the things as they were happening to document my issues since the stuff that came out of my printer wasn't what was on my screen. It would change in the process sometimes, sometimes I would see it change. I can attach anything that might be helpful, just don't want to reviel the wrong thing (not that my security isn't already compromised, I'm sure!). I burned most things on disks as they happened and I captured them.
Can’t use Software Update under the Apple Icon, can’t update anything now.
I would appreciate ANY advice or help. I need my life back!!!!!
THANKS.
Apr 23 02:43:04 MCita loginwindow[68]: sendQuitEventToApp (iTunes Helper): AESendMessage returned error -609
Apr 23 02:43:05 MCita shutdown: halt by SweetNibblets:
Apr 23 02:43:06 MCita SystemStarter[259]: authentication service (268) did not complete successfully
Apr 23 06:57:33 localhost kernel[0]: standard timeslicing quantum is 10000 us
Apr 23 06:57:33 localhost mDNSResponder-107 (Mar 20 2005 20: 31:47)[44]: starting
Apr 23 06:57:34 localhost kernel[0]: vmpagebootstrap: 125523 free pages
Apr 23 06:57:33 localhost DirectoryService[49]: Launched version 1.8 (v346)
Apr 23 06:57:34 localhost kernel[0]: migtable_maxdispl = 70
Apr 23 06:57:33 localhost lookupd[41]: lookupd (version 365) starting - Wed Apr 23 06:57:33 2008
Apr 23 06:57:34 localhost kernel[0]: 79 prelinked modules
Apr 23 06:57:34 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Apr 23 06:57:34 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Apr 23 06:57:34 localhost kernel[0]: using 1310 buffer headers and 1310 cluster IO buffer headers
Apr 23 06:57:34 localhost kernel[0]: IOPCCard info: Intel PCIC probe: TI 1510 rev 00
Apr 23 06:57:34 localhost kernel[0]: FireWire (OHCI) Apple ID 31 built-in now active, GUID 001124ff fedd0fa6; max speed s800.
Apr 23 06:57:34 localhost kernel[0]: Security auditing service present
Apr 23 06:57:34 localhost kernel[0]: BSM auditing present
Apr 23 06:57:34 localhost kernel[0]: disabled
Apr 23 06:57:34 localhost kernel[0]: rooting via boot-uuid from /chosen: 2D3D272F-CD3D-3CBA-A0BC-F72918B50F54
Apr 23 06:57:34 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Apr 23 06:57:34 localhost kernel[0]: Got boot device = IOService:/MacRISC2PE/pci@f4000000/AppleMacRiscPCI/ata-6@D/AppleKauaiATA/ATADev iceNub@0/IOATABlockStorageDriver/IOATABlockStorageDevice/IOBlockStorageDriver/TO SHIBA MK8026GAX Media/IOApplePartitionScheme/AppleHFS_Untitled1@3
Apr 23 06:57:34 localhost kernel[0]: BSD root: disk0s3, major 14, minor 2
Apr 23 06:57:34 localhost kernel[0]: Jettisoning kernel linker.
Apr 23 06:57:34 localhost kernel[0]: Resetting IOCatalogue.
Apr 23 06:57:34 localhost kernel[0]: Matching service count = 0
Apr 23 06:57:34 localhost kernel[0]: Matching service count = 1
Apr 23 06:57:34 localhost kernel[0]: Matching service count = 1
Apr 23 06:57:34 localhost kernel[0]: Matching service count = 1
Apr 23 06:57:34 localhost kernel[0]: Matching service count = 1
Apr 23 06:57:34 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Apr 23 06:57:34 localhost kernel[0]: UniNEnet: Ethernet address 00:11:24:dd:0f:a6
Apr 23 06:57:34 localhost launchd: Server 290b in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[41]: exited abnormally: Hangup
Apr 23 06:57:34 localhost lookupd[57]: lookupd (version 365) starting - Wed Apr 23 06:57:34 2008
Apr 23 06:57:35 localhost diskarbitrationd[35]: disk0s3 hfs 2D3D272F-CD3D-3CBA-A0BC-F72918B50F54 Untitled /
Apr 23 06:57:35 localhost 1527775232: cupsd's bootstrap server port not found
Apr 23 06:57:37 localhost kernel[0]: ATY,Jasper_A: vram [b8000000:04000000]
Apr 23 06:57:37 localhost kernel[0]: UniNEnet::monitorLinkStatus - Link is up at 100 Mbps - Full Duplex
Apr 23 06:57:37 MCita configd[33]: setting hostname to "MCita.local"
Apr 23 06:57:37 MCita mDNSResponder: Adding browse domain local.
Apr 23 06:57:38 MCita kernel[0]: ATY,Jasper_B: vram [b8000000:04000000]
Apr 23 06:57:38 MCita /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Apr 23 06:57:39 MCita loginwindow[68]: Login Window Started Security Agent
Apr 23 06:57:39 MCita launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[57]: exited abnormally: Hangup
Apr 23 06:57:39 MCita configd[33]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Apr 23 06:57:39 MCita lookupd[78]: lookupd (version 365) starting - Wed Apr 23 06:57:39 2008
Apr 23 06:57:39 MCita configd[33]: posting notification com.apple.system.config.network_change
Apr 23 06:57:39 MCita launchd: Server 2713 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[78]: exited abnormally: Hangup
Apr 23 06:57:39 MCita lookupd[79]: lookupd (version 365) starting - Wed Apr 23 06:57:39 2008
Apr 23 06:57:40 MCita 1527775232: cupsd's bootstrap server port not found
Apr 23 06:57:40 MCita configd[33]: target=enable-network: disabled
Apr 23 07:00:24 MCita /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Apr 23 07:00:25 MCita loginwindow[209]: Login Window Started Security Agent
Apr 23 07:01:59 localhost kernel[0]: standard timeslicing quantum is 10000 us
Apr 23 07:01:58 localhost mDNSResponder-107 (Mar 20 2005 20: 31:47)[44]: starting
Apr 23 07:01:59 localhost kernel[0]: vmpagebootstrap: 125523 free pages
Apr 23 07:01:59 localhost DirectoryService[49]: Launched version 1.8 (v346)
Apr 23 07:01:59 localhost kernel[0]: migtable_maxdispl = 70
Apr 23 07:01:59 localhost lookupd[41]: lookupd (version 365) starting - Wed Apr 23 07:01:59 2008
Apr 23 07:01:59 localhost kernel[0]: 79 prelinked modules
Apr 23 07:01:59 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Apr 23 07:01:59 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Apr 23 07:01:59 localhost kernel[0]: using 1310 buffer headers and 1310 cluster IO buffer headers
Apr 23 07:01:59 localhost kernel[0]: IOPCCard info: Intel PCIC probe: TI 1510 rev 00
Apr 23 07:01:59 localhost kernel[0]: FireWire (OHCI) Apple ID 31 built-in now active, GUID 001124ff fedd0fa6; max speed s800.
Apr 23 07:01:59 localhost kernel[0]: Security auditing service present
Apr 23 07:01:59 localhost kernel[0]: BSM auditing present
Apr 23 07:01:59 localhost kernel[0]: disabled
Apr 23 07:01:59 localhost kernel[0]: rooting via boot-uuid from /chosen: 2D3D272F-CD3D-3CBA-A0BC-F72918B50F54
Apr 23 07:01:59 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Apr 23 07:01:59 localhost kernel[0]: Got boot device = IOService:/MacRISC2PE/pci@f4000000/AppleMacRiscPCI/ata-6@D/AppleKauaiATA/ATADev iceNub@0/IOATABlockStorageDriver/IOATABlockStorageDevice/IOBlockStorageDriver/TO SHIBA MK8026GAX Media/IOApplePartitionScheme/AppleHFS_Untitled1@3
Apr 23 07:01:59 localhost kernel[0]: BSD root: disk0s3, major 14, minor 2
Apr 23 07:01:59 localhost kernel[0]: jnl: replay_journal: from: 4327936 to: 1399296 (joffset 0x256000)
Apr 23 07:01:59 localhost kernel[0]: in6ifattachlinklocal: failed to configure a link-local address on lo0 (errno=55)
Apr 23 07:01:59 localhost kernel[0]: in6_ifattach: lo0 failed to attach a linklocal address.
Apr 23 07:01:59 localhost kernel[0]: HFS: Removed 1 orphaned unlinked files
Apr 23 07:01:59 localhost kernel[0]: Jettisoning kernel linker.
Apr 23 07:01:59 localhost kernel[0]: Resetting IOCatalogue.
Apr 23 07:01:59 localhost kernel[0]: Matching service count = 0
Apr 23 07:01:59 localhost kernel[0]: Matching service count = 1
Apr 23 07:01:59 localhost kernel[0]: Matching service count = 1
Apr 23 07:01:59 localhost kernel[0]: Matching service count = 1
Apr 23 07:01:59 localhost kernel[0]: Matching service count = 1
Apr 23 07:01:59 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Apr 23 07:01:59 localhost kernel[0]: UniNEnet: Ethernet address 00:11:24:dd:0f:a6
Apr 23 07:01:59 localhost diskarbitrationd[35]: disk0s3 hfs 2D3D272F-CD3D-3CBA-A0BC-F72918B50F54 Untitled /
Apr 23 07:01:59 localhost 1527775232: cupsd's bootstrap server port not found
Apr 23 07:01:59 localhost launchd: Server 290b in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[41]: exited abnormally: Hangup
Apr 23 07:02:00 localhost lookupd[62]: lookupd (version 365) starting - Wed Apr 23 07:02:00 2008
Apr 23 07:02:02 localhost kernel[0]: ATY,Jasper_A: vram [b8000000:04000000]
Apr 23 07:02:02 localhost kernel[0]: UniNEnet::monitorLinkStatus - Link is up at 100 Mbps - Full Duplex
Apr 23 07:02:02 MCita configd[33]: setting hostname to "MCita.local"
Apr 23 07:02:02 MCita kernel[0]: ATY,Jasper_B: vram [b8000000:04000000]
Apr 23 07:02:02 MCita mDNSResponder: Adding browse domain local.
Apr 23 07:02:03 MCita /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Apr 23 07:02:03 MCita loginwindow[67]: Login Window Started Security Agent
Apr 23 07:02:04 MCita launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[62]: exited abnormally: Hangup
Apr 23 07:02:04 MCita configd[33]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Apr 23 07:02:04 MCita configd[33]: posting notification com.apple.system.config.network_change
Apr 23 07:02:04 MCita lookupd[77]: lookupd (version 365) starting - Wed Apr 23 07:02:04 2008
Apr 23 07:02:04 MCita 1527775232: cupsd's bootstrap server port not found
Apr 23 07:02:05 MCita configd[33]: target=enable-network: disabled
Apr 23 07:04:07 MCita /usr/sbin/ocspd: starting
How can you attach a file into the reply area? I noticed you could when first posting, but not sure now since most of the logs and stuff I saved I had to "grab" in Preview and then save...
Here's my console log from a sec. ago....
Mac OS X Version 10.4 (Build 8A451)
2008-04-23 07:02:21 -0700
2008-04-23 07:02:23.961 HPEventHandler[199]: DebugAssert: Third Party Client: (NULL != m_lock && 0 == errno) Can't create semaphore lock[/Volumes/Development/HP/Mac-Sirani/mac-software/components/HPEventHandler/ Sources/Core/HPTMNotificationManager.cpp:62]
2008-04-23 07:02:25.816 SystemUIServer[188] lang is:en
Apr 23 07:04:07 MCita /usr/sbin/ocspd: starting
2008-04-23 07:09:56.846 System Preferences[207] display [1282]: invalid operation
2008-04-23 08:35:47.545 Mail[228] InkChecker could not launch , launch path not accessible
2008-04-23 08:38:55.415 Mail[228] nil account passing into [SpecialMailboxes setupUIFromValuesInAccount:]
2008-04-23 08:38:56.179 Mail[228] * -[NSCFDictionary numberOfRowsInTableView:]: selector not recognized [self = 0x4d19930]
2008-04-23 08:38:56.209 Mail[228] * -[NSCFDictionary numberOfRowsInTableView:]: selector not recognized [self = 0x4d19930]
2008-04-23 08:38:56.224 Mail[228] * -[NSCFDictionary numberOfRowsInTableView:]: selector not recognized [self = 0x4d19930]
2008-04-23 08:38:56.225 Mail[228] * -[NSCFDictionary numberOfRowsInTableView:]: selector not recognized [self = 0x4d19930]
2008-04-23 08:38:56.226 Mail[228] * -[NSCFDictionary numberOfRowsInTableView:]: selector not recognized [self = 0x4d19930]
2008-04-23 08:38:56.226 Mail[228] * -[NSCFDictionary numberOfRowsInTableView:]: selector not recognized [self = 0x4d19930]
2008-04-23 08:38:59.749 Mail[228] * -[NSCFDictionary numberOfRowsInTableView:]: selector not recognized [self = 0x4d19930]
2008-04-23 08:38:59.749 Mail[228] * -[NSCFDictionary numberOfRowsInTableView:]: selector not recognized [self = 0x4d19930]
2008-04-23 08:38:59.831 Mail[228] * -[NSCFDictionary numberOfRowsInTableView:]: selector not recognized [self = 0x4d19930]
2008-04-23 08:38:59.831 Mail[228] * -[NSCFDictionary numberOfRowsInTableView:]: selector not recognized [self = 0x4d19930]
2008-04-23 08:39:00.214 Mail[228] * -[NSCFDictionary numberOfRowsInTableView:]: selector not recognized [self = 0x4d19930]
2008-04-23 08:39:00.214 Mail[228] * -[NSCFDictionary numberOfRowsInTableView:]: selector not recognized [self = 0x4d19930]
2008-04-23 08:39:00.424 Mail[228] * -[NSCFDictionary numberOfRowsInTableView:]: selector not recognized [self = 0x4d19930]
2008-04-23 08:39:00.425 Mail[228] * -[NSCFDictionary numberOfRowsInTableView:]: selector not recognized [self = 0x4d19930]
2008-04-23 08:39:01.064 Mail[228] * -[NSCFDictionary numberOfRowsInTableView:]: selector not recognized [self = 0x4d19930]
2008-04-23 08:39:01.064 Mail[228] * -[NSCFDictionary numberOfRowsInTableView:]: selector not recognized [self = 0x4d19930]
2008-04-23 08:39:01.346 Mail[228] * -[NSCFDictionary numberOfRowsInTableView:]: selector not recognized [self = 0x4d19930]
2008-04-23 08:39:01.348 Mail[228] * -[NSCFDictionary numberOfRowsInTableView:]: selector not recognized [self = 0x4d19930]
2008-04-23 08:39:01.480 Mail[228] * -[NSCFDictionary numberOfRowsInTableView:]: selector not recognized [self = 0x4d19930]
2008-04-23 08:39:01.481 Mail[228] * -[NSCFDictionary numberOfRowsInTableView:]: selector not recognized [self = 0x4d19930]
2008-04-23 08:39:01.680 Mail[228] * -[NSCFDictionary numberOfRowsInTableView:]: selector not recognized [self = 0x4d19930]
2008-04-23 08:39:01.681 Mail[228] * -[NSCFDictionary numberOfRowsInTableView:]: selector not recognized [self = 0x4d19930]
2008-04-23 08:39:01.861 Mail[228] * -[NSCFDictionary numberOfRowsInTableView:]: selector not recognized [self = 0x4d19930]
2008-04-23 08:39:01.863 Mail[228] * -[NSCFDictionary numberOfRowsInTableView:]: selector not recognized [self = 0x4d19930]
2008-04-23 08:39:02.385 Mail[228] * -[NSCFDictionary numberOfRowsInTableView:]: selector not recognized [self = 0x4d19930]
2008-04-23 08:39:02.387 Mail[228] * -[NSCFDictionary numberOfRowsInTableView:]: selector not recognized [self = 0x4d19930]
2008-04-23 08:39:03.235 Mail[228] * -[NSCFDictionary numberOfRowsInTableView:]: selector not recognized [self = 0x4d19930]
2008-04-23 08:39:03.238 Mail[228] * -[NSCFDictionary numberOfRowsInTableView:]: selector not recognized [self = 0x4d19930]
2008-04-23 08:39:05.044 Mail[228] * -[NSCFDictionary numberOfRowsInTableView:]: selector not recognized [self = 0x4d19930]
2008-04-23 08:39:05.044 Mail[228] * -[NSCFDictionary numberOfRowsInTableView:]: selector not recognized [self = 0x4d19930]
2008-04-23 10:40:51.411 Safari[204] InkChecker could not launch , launch path not accessible
2008-04-23 13:40:24.362 SystemUIServer[188] Error: Unable to get extended status.
2008-04-23 13:40:24.998 SoftwareUpdateCheck[284] Checking for updates
2008-04-23 13:40:25.123 SoftwareUpdateCheck[284] Loading CatalogURL httpL//index.sucatalog
2008-04-23 13:40:25.228 SoftwareUpdateCheck[284] loader:didFailWithError:NSError "unsupported URL" Domain=NSURLErrorDomain Code=-1002 UserInfo={
NSErrorFailingURLKey = httpL//index.sucatalog;
NSErrorFailingURLStringKey = "httpL//index.sucatalog";
NSLocalizedDescription = "unsupported URL";
2008-04-23 13:40:25.230 SoftwareUpdateCheck[284] unsupported URL
2008-04-23 13:46:36.725 Safari[204] InkChecker could not launch , launch path not accessible
2008-04-23 13:48:02.436 Safari[204] InkChecker could not launch , launch path not accessible
2008-04-23 13:49:03.473 Safari[204] InkChecker could not launch , launch path not accessible
2008-04-23 13:53:46.805 Safari[204] InkChecker could not launch , launch path not accessible
2008-04-23 13:56:06.749 Safari[204] InkChecker could not launch , launch path not accessible
2008-04-23 13:56:48.500 Safari[204] InkChecker could not launch , launch path not accessible
2008-04-23 13:57:53.057 Safari[204] InkChecker could not launch , launch path not accessible
2008-04-23 13:58:28.644 Safari[204] InkChecker could not launch , launch path not accessible
2008-04-23 14:03:04.826 Safari[204] InkChecker could not launch , launch path not accessible
2008-04-23 14:04:40.729 Safari[204] InkChecker could not launch , launch path not accessible
2008-04-23 14:06:15.516 Safari[204] InkChecker could not launch , launch path not accessible
2008-04-23 14:07:43.804 Safari[204] InkChecker could not launch , launch path not accessible
2008-04-23 14:08:57.180 Safari[204] InkChecker could not launch , launch path not accessible
2008-04-23 14:09:43.628 Safari[204] InkChecker could not launch , launch path not accessible
2008-04-23 14:11:52.006 Safari[204] InkChecker could not launch , launch path not accessible
2008-04-23 14:14:43.026 Safari[204] InkChecker could not launch , launch path not accessible
2008-04-23 14:15:14.040 Safari[204] InkChecker could not launch , launch path not accessible
2008-04-23 14:16:48.541 Safari[204] InkChecker could not launch , launch path not accessible
2008-04-23 14:17:35.494 Safari[204] InkChecker could not launch , launch path not accessible
2008-04-23 14:19:12.577 Safari[204] InkChecker could not launch , launch path not accessible
2008-04-23 14:20:21.939 Safari[204] InkChecker could not launch , launch path not accessible
2008-04-23 14:21:17.523 Safari[204] InkChecker could not launch , launch path not accessible
2008-04-23 14:23:12.163 Safari[204] InkChecker could not launch , launch path not accessible
2008-04-23 14:23:37.790 Safari[204] InkChecker could not launch , launch path not accessible
2008-04-23 14:25:41.101 Safari[204] InkChecker could not launch , launch path not accessible
2008-04-23 14:26:26.037 Safari[204] InkChecker could not launch , launch path not accessible
2008-04-23 14:27:02.682 Safari[204] InkChecker could not launch , launch path not accessible
2008-04-23 14:33:12.446 Microsoft Word[274] InkChecker could not launch , launch path not accessible
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
2008-04-23 14:34:21.687 Microsoft Word[274] InkChecker could not launch , launch path not accessible
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
2008-04-23 14:36:30.843 Microsoft Word[274] InkChecker could not launch , launch path not accessible
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
2008-04-23 14:42:34.676 Microsoft Entourage[349] InkChecker could not launch , launch path not accessible
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
2008-04-23 14:42:48.200 Microsoft Entourage[349] InkChecker could not launch , launch path not accessible
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
CCalLayoutOptionWindow::CreateLayoutDialog
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
2008-04-23 14:51:08.807 Microsoft Word[274] InkChecker could not launch , launch path not accessible
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
2008-04-23 14:52:52.569 Microsoft Word[274] InkChecker could not launch , launch path not accessible
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
2008-04-23 14:54:00.472 Microsoft Word[274] InkChecker could not launch , launch path not accessible
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
2008-04-23 14:56:43.732 Microsoft Word[274] InkChecker could not launch , launch path not accessible
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext
Apr 23 19:27:50 MCita mdimportserver[393]: NSDataMessageStore: couldn't find body
Apr 23 19:27:50 MCita mdimportserver[393]: NSDataMessageStore: couldn't find body
Apr 23 19:27:50 MCita mdimportserver[393]: NSDataMessageStore: couldn't find body
Apr 23 19:40:02 MCita mdimportserver[393]: NSDataMessageStore: couldn't find body
Apr 23 19:40:02 MCita mdimportserver[393]: NSDataMessageStore: couldn't find body
Apr 23 19:40:02 MCita mdimportserver[393]: NSDataMessageStore: couldn't find body
Apr 23 22:05:08 MCita mDNSResponder: Repeated transitions for interface en0 (192.168.1.67); delaying packets by 5 seconds
Similar Messages
-
Can not view slidshows or creat a book on Snapfish. SF IT folks say it's a security issue on my end. Any ideas?
You will need to contact Snapfish to find out their system requirements and which plugin you need
- http://support.snapfish.com/app/answers/detail/a_id/669/brand/3 -
I updated automatically some security issues in my computer (I don't remember which) and now my gmail will start opening until it reaches 75% and it will not go on opening.
I can open it Internet explorer but not in Mozila fireworksClear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Other web browsers and security issues?
Since even an Apple KB article recognizes the need for an additional browser and because of Safari's limitations and problems, I'm going to try switching to another browser (most likely OmniWeb and am looking at Firefox, Shira and Opera also though perhaps not as a primary browser) but I'm wondering about their ability to keep on top of any security issues for Mac? (and how do you keep up with security updates?)
Though perhaps unfounded, at least with Safari, I feel that Apple has a vested interest in keeping on top of security issues (for Safari and Java) and I can readily find out about security updates via software updater.Most of the other Mac browsers have their adherents. They are all good browsers (I have 7 browsers installed to test various web sites and for change-of-pace usage). They all have their strengths and they all have their weaknesses. Only iCab and OmniWeb are still shareware, the rest are now or always have been free (Opera just recently stopped charging for its browser).
I have settled on Firefox as my alternate browser and I use it maybe just a tad more than Safari, but I do switch back and forth between them. The Mozilla foundation is good at getting security updates out when needed. Firefox has a button on the toolbar to check for updates. One nice thing about Firefox is that you can install free extensions which enhance the features available. I have one to supplement tab features, one to control iTunes from Firefox's status bar, one to help me format messages in discussion forums, and one to block ads.
I prefer OmniWeb for doing intensive research because of the way it handles tabs in its sidebar, showing me which ones I've looked at and which ones I haven't, and giving me great flexibility in rearranging tabs, which are viewable as thumbnails or text names (I have had up to a hundred or so tabs open in OmniWeb.
Shiira is good and its fast. I have not checked for updates for a while, but the last time I updated there was still a problem with Shiira kicking you out of logged-in sites when you moved from page to page with in web site. This may have been fixed by now - they were aware of the problem back then.
Camino is a native OS X cousin of Firefox and is also fast, but is not updated as often.
I would stay away from Mozilla or Netscape unless you need all the additional modules they have and which take up hard disk space. Firefox and Camino represent the browser module of Mozilla/Netscape. Mozilla and Netscape have modules for email, irc chat, newsgroups, and for creating and editing web pages. Netscape is a branded and slightly customized version of Mozilla and is not updated as often.
Opera is a nice browser and some use it as their main browser, but I have not seen anything that really stands out for me, but that does not mean it is not worth a look.
I would stay away from abandonware Internet Explorer.
As for checking for updates, several of them, as with many Mac programs, now have a menu item that allows you to check for updates. Most of them also announce their updates on both VersionTracker and MacUpdate.
Happy Exploring. -
Today while using my iphone and trying to use facetime for the first time since updating to IOS6, my phone asked me if I wanted to use some email address that I do not have for facetime. What? The message pretty much said that this email address was linked to my apple ID. So I got to work logged into AppleID.Apple.com and saw the email address verified and also saw it displayed as an alternate apple id. Immediately, I changed my Apple ID password and called apple at 1800myapple since that is the number on the website and try to talk to someone that could assist me with this severe issue. Anyway, my iphone went dead and the people on the phone couldn't connect me to anyone because I couldn't give them a serial number to an apple device. I tried to explain to the technicians that this is a problem with my ID and that the alternate ID has access to everything that my Apple ID has access to. Both times the call went nowhere. This is ridiculous. Why can't I talk to a security team? Why is the technician telling me that I can manage my ID from the website, when I know that I am looking at the website and I cannot remove the alternate ID? How did this ID get associated with my account and why did I never receive an email informing me of the change?
Since Apple has other services and not just products STOP ASKING FOR A SERIAL NUMBER AND ASSIST THE CUSTOMER WITH THE ISSUE especially since it is a SECURITY ISSUE.oh man, I know exactly what you're talking about. i have a relatively easy to guess apple id email and everybody in the world thinks it's theirs... but once I turned on two-step authentication, the emails stopped completely. here's a faq about it:
http://support.apple.com/kb/HT5570
once i turned that on, whenever they'd want to reset my password, they would get asked for my recovery key, which they don't have, haha! victory is mine. -
My account was deleted for security issues. I made a new account, but I can't syncronise my apps with this new account. I bought a new Iphone and would like to transfer the apps ans music on this new one. Can somebody help me?
Why would you make a new account? This will likely cause many problems. Just get you old account enabled.
Apple ID: "This Apple ID has been disabled for security reasons" alert appears
Frequently Asked Questions About Apple ID
Everything you purchased with the old account will always be tied to that account. You will have to authorize the computer for that account and you will have to update the apps from that account. -
I need to update iOS 6.1.3 on my iPad2 to 6.1.6, due to security issue. Why is no update available? I do NOT want to install iOS 7, due to memory limitations.
Any upgrade will be to the most recent, compatible version, in this case 7.0.6.
-
Bit locker security issues (easy to crack) disk encryption?
Bit locker security issues (easy to crack) disk encryption?
Problem 1: When the PC run I think its too easy to get malicious users (with usb pendrive) or spyware to get the encryption key (fast and easy)
youtube.com/watch?v=0npTlOq6q_0
Problem2:not resistant with bruteforce attacks
youtube.com/watch?v=zvaJxnvbGic
Problem 3: not resistant with boot hacking
Im using DriveCrypt plus pack and searched security issues in bit locker.The bit locker allow you the bruteforce/dic attack easy.I think It would be much safer 1. (I think the keys stored somewhere that is easily read) 2. Do not just be enough password
need a password+file combination to decrypt the disk. DriveCrypt plus pack use a file+password combination if you know the password but you wont have the file you can not decrypt the disk (protect with bruteforce attack).On system boot protected bruteforce
attak you can crash the (boot).If the boot system crash you can not decrypt the disk just the password you need the file+password combination plus to decrypt it. I am not a programmer but I see the BitLocker ( easy security catches to crack the disk encryption).Im
tested DriveCrypt and I can not get the key that easy (Problem 1). I have not tested it in greater depth just trying to (catches to crack software encryption).Where is your question, sir?
If the question were "is it easy to crack", the answer is "no". Your videos make use of several assumptions and ingredients and permissions that a normal attacker does not have.
"Problem 3" is not clear, please describe what scenario you are talking about. -
Teachers in our district are supposed to use www.thinkcentral.com with FireFox.
Some have no problem accessing the lesson plans.
Most when they login click on a lesson plan and an icon shows up that says loading but never does.
If you reboot the computer and login you can open a page once but not a second time and no other lessons will open.
Think Central support says this is a security issue with Firefox.
I have updated FireFox, all the Adobe, Reader, Flash, Air and Shockwave. As well as Java.
I have allowed the pop ups to the think Central web site.
Any help would be appreciatedAre there any notification icons on the left end of the address bar? If so, please click them to see whether they related to security issues (such as blocked content - shield icon: [[How does content that isn't secure affect my safety?]]) or a plugin requiring permission (Lego-like icon).
Does Think Central have any help pages about this issue? Without an account, it is difficult to explore the issue first-hand. -
Hi All,
I was wondering if anyone could help me with a HFM security issue on HFM 11.1.2.3 we are facing please?
The problem is that a user can by-pass the journal approval stage and post directly after submitting if Custom4 access control=All is selected.
If any of the other access controls (None, Read, Promote) for custom 4 are selected, the first two steps of the process are possible -
input and approval of the journal are possible but final posting of the journal is not and returns an error that says:
"User does not have the access right to perform this journal task"
The options I have thought for a workaround are as follows:
1. 1. Set up a 3rd user called data poster and remove submit journal role from user 1 (data inputter)
2. 2. Put in place process control and use the various review levels (could be quite time consuming given there is no time left for development)
Have anyone experienced this before and come up with a quick way of resolving this please? It would be very much appreciated.
We have two types of users who are associated with groups in HFM and have the appropriate roles assigned to them to complete their tasks,
they are:
1. A data Inputter (who inputs base data and journals, who has access to create and submit journals)
2. 2. A data reviewer (who approves journals)
The process is as follows:
1. 1. Logon as Data inputter to submit the journals
2. 2. Logon as Data reviewer to approve the journals
3. 3. Logon as Data inputter to post the Journals
We are using the custom 4 member to identify different adjustment types. At the moment we are able to set it up in such a way whereby Steps 1 and 2 can be completed
but once it comes back to step 3, we get an error as follows:
"User does not have the access right to perform this journal task"
(This error comes about when the access control on custom 4 is set to None, Read, Promote)
Custom 4 Access Rights looks as follows:
C4_ADJ01
C4_ADJ02
C4_ADJ03
C4_ADJ04
HFMDefault
Read
Read
Read
Read
HFMLoad
All
Promote
None
Read
HFMReview
Read
All
All
All
When Custom 4=C4_ADJ01 all 3 steps can be completed but it by-passes step 2 (journal approval).
For all other Custom 4 we complete steps 1 and 2 successfully but not step 3 due to access issues.
Roles for the groups that users assigned look like the following:
Test User Name
Test User Name
Access Rights
1
Base Data input/Journal Data input
test_HFMLoad
Reviewer 1
Review Supervisor
Create Journals
Read Journals
Database Management
Enable write back in Web Grid
Load Excel Data
Generate Recurring
Post Journals
Create Unbalanced Journals
Manage Templates
Data Form Write Back from Excel
Consolidate
2
Data Reviewer
test_HFMReview
Reviewer 1
Review Supervisor
Create Journals
Read Journals
Database Management
Approve Journals
Consolidate
Reviewer 2
Generate Recurring
Manage Templates
Create Unbalanced Journals
Any help or advice would be much appreciated.
Thanks in advance,
M.Hi All,
I was wondering if anyone could help me with a HFM security issue on HFM 11.1.2.3 we are facing please?
The problem is that a user can by-pass the journal approval stage and post directly after submitting if Custom4 access control=All is selected.
If any of the other access controls (None, Read, Promote) for custom 4 are selected, the first two steps of the process are possible -
input and approval of the journal are possible but final posting of the journal is not and returns an error that says:
"User does not have the access right to perform this journal task"
The options I have thought for a workaround are as follows:
1. 1. Set up a 3rd user called data poster and remove submit journal role from user 1 (data inputter)
2. 2. Put in place process control and use the various review levels (could be quite time consuming given there is no time left for development)
Have anyone experienced this before and come up with a quick way of resolving this please? It would be very much appreciated.
We have two types of users who are associated with groups in HFM and have the appropriate roles assigned to them to complete their tasks,
they are:
1. A data Inputter (who inputs base data and journals, who has access to create and submit journals)
2. 2. A data reviewer (who approves journals)
The process is as follows:
1. 1. Logon as Data inputter to submit the journals
2. 2. Logon as Data reviewer to approve the journals
3. 3. Logon as Data inputter to post the Journals
We are using the custom 4 member to identify different adjustment types. At the moment we are able to set it up in such a way whereby Steps 1 and 2 can be completed
but once it comes back to step 3, we get an error as follows:
"User does not have the access right to perform this journal task"
(This error comes about when the access control on custom 4 is set to None, Read, Promote)
Custom 4 Access Rights looks as follows:
C4_ADJ01
C4_ADJ02
C4_ADJ03
C4_ADJ04
HFMDefault
Read
Read
Read
Read
HFMLoad
All
Promote
None
Read
HFMReview
Read
All
All
All
When Custom 4=C4_ADJ01 all 3 steps can be completed but it by-passes step 2 (journal approval).
For all other Custom 4 we complete steps 1 and 2 successfully but not step 3 due to access issues.
Roles for the groups that users assigned look like the following:
Test User Name
Test User Name
Access Rights
1
Base Data input/Journal Data input
test_HFMLoad
Reviewer 1
Review Supervisor
Create Journals
Read Journals
Database Management
Enable write back in Web Grid
Load Excel Data
Generate Recurring
Post Journals
Create Unbalanced Journals
Manage Templates
Data Form Write Back from Excel
Consolidate
2
Data Reviewer
test_HFMReview
Reviewer 1
Review Supervisor
Create Journals
Read Journals
Database Management
Approve Journals
Consolidate
Reviewer 2
Generate Recurring
Manage Templates
Create Unbalanced Journals
Any help or advice would be much appreciated.
Thanks in advance,
M. -
Why are security issues at bottom of security page
When first using firefox noticed at bottom of security page several security issues.
I'm pretty sure you want the iTunes support forum here:
https://discussions.apple.com/community/itunes
This is for iTunes U (iTunes for Universities). -
Can I create a form that doesn't trigger Acrobat's JavaScript disabled / security issues warning?
Hello,
Can I create a pdf that doesn't trigger Acrobat's JavaScript is currently disabled and this document uses it for some features. Enabling JavaScript can lead to potential security issues.
I even get this error when I create a blank pdf.
I'm not using any JavaScript in the form and the nature of the message might tend to be a bit scary to some people since it mentions enabling JS can lead to potential security issues. I basically want to disable the messaging of a feature I'm not even using.
Anyone know if this is possible and if so, how I go about it?
Thank you.Hi,
I too share your frustration!!
Unfortunately I do not have a complete answer for you.
From the start I must say that Stefan Cameron has been very helpful (http://forms.stefcameron.com/2010/01/14/acrobatreader-9-3-now-available/), however I have not had sufficient time available to deal with the issue (or find a satisfactory resolution).
The original post that Srini shared with you related to an XFA form that had FormCalc and Javascript in it. I will now share with you another situation that is closer to your experiences.
Sometimes where we have a complex solution/form, we often give our users a PDF with instructions and demonstrations. We generate these using Adobe products:
LiveCycle Designer ES to generate the solution/form;
Captivate to record the demonstration (.swf);
Acrobat to package it up in a static PDF.
The screen shots below are from a PDF that includes written instructions and six Flash (.swf) files. The PDF does NOT include fields/form objects and does NOT include any FormCalc or Javascript.
One of the big sells in Acrobat 9 was that Adobe had fully integrated Flash (Adobe product, ex. Macromedia) into Acrobat 9. This mean that .swf files could run natively inside a PDF. Brilliant!!! The website today is still pushing this message, for example:
Now bear in mind that the following screenshots are from a PDF that does not contain any scripting - its sole purpose is to "inform" the user, "look as good as the work I put into it", incorporate instruction and "multimedia" in a "single polished file" and I should be "confident that my audience will be able to view my work exactly as intended".
Not so!!
When the user now opens the form, all looks OK. No warning. They can read the instructions and scroll down to the multimedia (.swf files).
However when the user clicks on the multimedia, the yellow bar appears:
I go through the "trust" process:
And the PDF looks like it is OK, no yellow bar. When I click on the multimedia, it begins to play - yes!! BUT ONLY FOR A SECOND OR TWO AND THEN IT STOPS AND GOES BACK TO THE START - AGGGGHHHHHHH!!!!!. I would apologise for shouting, but this is beyond frustration. The work in capturing six screencasts in Captivate, annotating them, publishing to .swf and packaging up in Acrobat has been a complete waste of time. Worse than that I now have several PDFs out there, that do not work. Good advertisement for my business? I don't think so!!
The document that Stefan provided (Managing JavaScript Execution in the Acrobat Family of Products) does not mention Flash/.swf as being a problem. However I would recommend that you go through this document, as it may help you.
So, where to now? I don't know. The previous posts and Stefan's responses have several urls that may help. You should maybe consider logging your experiences as a bug (log at Adobe).
In the meantime good luck,
Niall
UPDATE:
This behaviour (.swf playing for only a few seconds) happens in PDFs where the .swf is inserted as legacy media to run in earlier versions of Acrobat/Reader. In this case Acrobat/Reader is making an external call to Flash Player. Hence the yellow bar. However it does not explain why the Flash video still does not play when trusted.
If the .swf is added into the PDF as Flash media to run on Acrobat 9 and above, then it works without displaying the yellow warning bar.
So maybe any feature of your PDF that calls an external resource is likely to show the yellow warning bar. -
How do I to delete inbox mail without opening it , due to security issue.?
How do I to delete inbox mail without opening it , due to security issue.?
Right-click the message and select Delete.
-
I'm evaluating Java IDE's. My boss wants me to evaluate IDE security issues. I can't think of any issues, or how an IDE can have anything to do with security, but didn't want to sweep it under the rug without asking all of you security experts.
Are there any security concerns when selecting a Java IDE?Yeah, you confirmed what I already knew I suppose.
Unfortunately, I know nothing if this organization, as
I'm only consulting. The management here INSISTS that
security be addressed, but I think it's out of scope
for Java IDE selection. Thanks!In that context, things like "supports HTTPS and ssh access for remote development" may be exactly what they're looking for. It lets managers say "Yes we considered security in making this purchase, and yes the developers of this tool take security seriously." Doesn't mean that security is ever going to impact the actual use of the product.
Remember that a portion of any management decision goes to insuring you can show a good-faith effort to avoid problems, when/if they happen down the road and someone's looking for a fall guy...
Good luck!
Grant -
Possible Mac Mail Security Issue
A couple of times each week, I'm receiving returned e-mail messages that describe mail that I did not actually send. The "undeliverable" addresses in the Mailer-Daemon notifications are unfamiliar and involve a different overseas address for each notification.
Every aspect of the computer runs fine. in four years of being a devout Mac convert, I have not seen this type of problem until the past few weeks. So from my standpoint, the false notifications are just a minor annoyance. I've been deleting them. But, I wonder if there could there be a security issue or some other problem?
Thanks very much,
CharleyI am experiencing the same thing and it has just started in the last few weeks also. I get the mailer-daemon messages telling me I have had my emails rejected to people that I don't even know nor do I have anything to do with the message being rejected.
I am concerned that my computer has somehow been compromised but do not know whether or not this is the case.
The issue is how do we try to stop this - I read elsewhere that the email password needs to be changed but I am not sure if this is actually going to do anything at all.
Anyone have a suggestion to stop this?
Thanks
Maybe you are looking for
-
Want to use my iPad (4th gen) to edit a movie using iMovie - easy enough if the movie file is on the iPad - but what if it's too large - can I keep the source file on a USB stick or external USB hard drive and edit from there? How can you do this?
-
Advantages of third party Document Management vs SAP
We have had the IXOS product installed for a long period of time to store our SAP related documents such as drawings, POs, Invoices. We also use IXOS to store our SAP archived data thru the SAP archivelink interface. Due to cost and support issues,
-
Since I am Using Oracle 11.1.0.6.0 Version It Was Displaying the inconsistent Datatypes 32-bit
SELECT Ename, CONNECT_BY_ROOT Sal RootVal, Sal ActualValue, CONNECT_BY_ROOT Sal - Sal TotalValue FROM Emp START WITH Ename='KING' CONNECT BY PRIOR EmpNo=MGR
-
I'm looking for a direct link to download Acrobat Pro 9 for Mac. I've purchased a new laptop and I have no disks for the software since I purchased only a code. According to the forums a download link should show up under "my orders", but this is not
-
My iphoe 5 has the poor battery life, how to fix it?
how to fix my iphone 5 battery? it is in the gurantee period!