3.0 Running in Circles - Can't access

I've been using this new computer with all new install xp sp3 and AA3.0. This has worked for more than 6 months, no problems. I now have a UAD card installed and everything has worked. With this new system I haven't needed to lock any effects, no problems untill now. I'm working on a slightly bigger project and locked some effects and then the program stopped. The message I get is:
Shutting down. To continue where you left off, you must restart Audition. And I select "OK" Now I get "Microsoft Visual C++ Runtime Library.  R6025 pure virtual function call" message. I can't get into Audition to undo what I've done.
Some sessions are unreplaceable.
I understand some kind of corrupted registry file or something like that.
Any suggestions?
Donnie

My comp. guru fixed it in about 10 minutes. I had a bad file. It was deleated and automatically put back correctly. Works fine now.
Date: Thu, 5 Aug 2010 15:55:10 -0600
From: [email protected]
To: [email protected]
Subject: 3.0 Running in Circles - Can't access
Hi Donnie,
Do you recall the precise last steps you took before Audition stopped working?  Did it crash and start giving this error when you launched it again, or did this just occur at random after working fine the previous time?
How far does the start-up process get before you receive this error?  Do you see the Audition splash screen?  Does it begin to show the UI before crashing?  Have you already installed the Audition 3.01 update patch?
My first suggestion would be to wipe the application preferences and try launching it again.  To do this, rename the following "3.0" folder to "3.0.BAK" and then launch Audition
XP: C:\Document and Settings\<your username>\Application Data\Adobe\Audition\3.0\
Vista/Win7: C:\Users\<your username>\AppData\Roaming\Adobe\Audition\3.0\
Renaming the folder instead of deleting it will retain your previous preferences and effects presets in case this is not the problem.
>

Similar Messages

  • Can't access web after install

    Installed on new SLES11 box. Livetime says it's running, but I can't access at http://<ip> or http://<ip>:8700.
    When I installed SLES, I used the defaults for server type (Print). Show I add/change to Web/LAMP?
    Or is it something else?
    thanks

    Lindsey,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • I can't access router address. "404 not found"

    With my Linksys cable modem and wireless router hooked up and running properly, I can't access the router address. I get "File 404 not found" and "The requested URL was not found on this server. " It is the same address as in the Network Preferences window. The wireless router works great and all computers in the network have fast internet access but my boys want to "tweak" the port settings on the router and can't get to them. I've tried resetting the router every way possible but to no avail so I'm wondering if I don't have something
    set properly on the network page of OSX. Any help would be appreciated.
    Mac-Mini   Mac OS X (10.4.4)   1 GB Mem, Pioneer DVR Dual Layer

    Okay, sometimes routers go weird...so, unplug the router for at least a minute, then plug it back in. When it finishes the startup sequence, try logging in again.
    If you ever do get in, there is a firmware update available for your router. The firmware might be corrupted (happens a lot).
    http://www.linksys.com/servlet/Satellite?c=LCASupportC2&childpagename=US%2FLayout&cid=1166859837401&packedargs=sku%3DWRT54G&pagename= Linksys%2FCommon%2FVisitorWrapper&displaypage=download#versiondetail

  • Can't Access Azure VM after IP Address Change

    I recently logged into my Azure VM (Windows 2012 R2) and did the following:
    went to "Network Connections", selected properties
    Selected IPV4 and changed the "obtain IP Address automatically" option to "Use the following IP Address".
    I set the IP Address to the address that Azure gave me in the Azure Portal.
    However, since then - the machine is running but I can't access it.  Through some investigating, I realised that I shouldn't have done that.  Lesson Learnt.
    However, my question is - is there a way to change this in Powershell so that I can gain access again?
    or do I need to delete and recreate the server?
    Please help.
    Thanks in Advance.

    Hi,
    Based on my exprience, if you change the TCP/IP settings on the Azure VM. Next time you reboot the VM from the Azure management portal, the settings you saved on the VM would be changed to the default status(obtain IP Address automatically).
    I recommend you to restart the VM in the Azure management portal and then check the quick glance of the VM to make sure that all parameters are displaying. After that, you can connect(using xxx.cloudapp.net with RDP port)to it without any problems.
    If the above suggestion is not helpful, please share us the detailed error message.
    By the way, did you mean the internal IP address in the portal? Do you want to assign a static internal IP address to that VM? If yes, the VM should be in a virtual network and you can use Azure PowerShell cmdlets to do that.
    Configure a Static Internal IP Address for a VM
    Best regards,
    Susie
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • [HELP!] Can't access shared folder from Azure Web Role on same Azure Virtual Network

    I have an Azure Virtual Network that has a virtual machine acting like an app server running some legacy applications that is writing some files to a folder that is shared.
    This shared folder is accessible from other virtual machines within that virtual network without issue.
    The problem I am having is that I have an Azure Web Role that is also attached to the above
    Azure Virtual Network that is unable to access the shared folder. I know the web role can see the app server as it is able to ping the IP of the machine.
    There is some code that needs access to the shared folder to process some of the files that is stored there, but the code won't run because it can not access these files. I used Remote Desktop to see if I could ping the machine, and I can, but I cannot navigate
    to the path in file explorer due to access being denied.
    Can anyone offer any advice or tips to point me in the right direction to gain access to this shared folder from my Azure Web Role?

    Hi Robert,
    Thanks for your posting!
    Form your descirpiton, I suggest you can refer to Tom Zhang's solution via this
    link:
    1. Enable Remote Desktop. (You have done this step)
        2. RDP to one instance of your service. Open up IIS Manager and set the application pool identity to use the account that we used for RDP.
        3. On on-premise local machine, right click "My Computer' and select "Manage". Add a new account with the same account name and password as we specified for Remote Desktop.
        4. Give the new account necessary permissions to write file to the shared folder. (I think you have done this step too)
        5. Try running the code again and see if it works.
        6. If it still says "access to path <folder path located on local machine> is denied". Please check the permission of the shared folder again.
        7. If it works, then the next step is to configure the application pool identity using Startup Task instead of using Remote Desktop (See the suggestion inhttp://social.technet.microsoft.com/Forums/en-US/windowsazuresecurity/thread/247ba75e-87d9-497c-9ec6-1fd4e2c7ff90).
    But I still recommend you enable Remote Desktop for your web role to check if the Startup Task has successfully configured the application pool identity or not.
    Regards,
    Will
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Deploying Jira using Weblogic 10.3 - Can't access new jira server

    I was able to install WL 10.3, create a new domain named, 'atlassian', and add a new server to that domain named 'jira'. I add a datasource to 'jira' then deployed jira via a .war to the new server. By default the new domains AdminServer comes up and is accessable via port 7001/console, but the managed server, jira requied that I start nodemanger before it would allow me to start 'jira' sever. Now, jira sever, datasource and app are all running, but I can not access via URL.
    The Jira Server is running on port 7011, but I get a 404 when attempting to connect to http:\\<myserver>:7011 or http:\\<myserver>:7011\jira. Any ideas here are appreciated since Jira is not certified on 10.3, they aren't much help.
    Edited by: user9952700 on Mar 25, 2009 3:54 PM

    Atlassian has pretty good user forums, you might be able to get additional help there:
    http://forums.atlassian.com/forum.jspa?forumID=46
    Does the deployment screen show it has "Running". What does the deployment screen for the app show its context root as?
    Also, why not just JIRA standalone? (it comes out of the box running in embedded tomcat).

  • Can't access the "Apple" icon in upper main menu to shutdown my MacBook Pro running 10.6.8!  Also can't open a new finder window and main menus such as File and Edit are sluggish to open or don't open at all.  Doesn't happen each time I attempt to shutdow

    Can't access the "Apple" icon in upper main menu to shutdown my MacBook Pro running 10.6.8!  Also can't open a new finder window and main menus such as File and Edit are sluggish to open or don't open at all.  Doesn't happen each time I attempt to shutdowCan't

    There are some keyboard commands (shortcuts) you can use instead of having to go to the Apple menu -
    Control-Eject          This brings up the Restart-Sleep-Cancel-Shutdown window.
    Command-Option-Eject          This puts the machine to sleep.
    Command-Control-Eject          This closes all apps and restarts the machine.
    Command-Option-Control-Eject          This closes all apps and shuts the machine down.

  • How can I access Address Book data from an older version of the application to transfer it to a newer version of Mac OS running on a second hard drive on the same MDD G4?

    I installed a hard drive from one PowerPC Dual 1.25 GHz MDD into another one with an older version of the OS X.  all my Address Book data are on the older hard drive, from which I now boot the computer.  When I launch Address Book as an app on the hard drive with the newer version of the OS, I get an error message that says I cannot run the version of Address Book from the older hard drive on the newer OS.  How can I access the data on the older hard drive version of the Address Book app so that I can transfer it to the newer version of the app on the boot drive?  The "Import" functionality will not work. I will be grateful for any help I can get.  I would also like to uninstall the older version of OS X from the older hard drive.

    Boot from the older version of OSX, then in AB use the File>Export>Export vCard after selecting all in AB.
    Then boot from the new OSx & use the new AB to import that VCF file.

  • My iphone application running continuously in background to access some information by "beginBackgroundTaskWithExpirationHandler" then can i submit in appstore .

    My iphone application running continuously in background to access some information by "beginBackgroundTaskWithExpirationHandler" then can i submit in appstore ?

    This is a question that should probably be posed in the Developer forum.

  • How can I access my iCloud account from my computer, when I'm running OSX Leopard?

    I have a Mac Book running Leopard and I don't have the iCloud icon in my settings.. How can I access my iCloud account/back up my computer to the cloud?

    Your signature says you have 10.6.8 which is Snow Leopard, but that is still not compatible with iCloud. You cannot back up your computer to iCloud in any case - it doesn't provide for that, only for iOS backups.
    The minimum requirement for iCloud is Lion 10.7.5 (Mountain Lion preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is non non-functional - you cannot now open or access a MobileMe account.
    If you have already set up an iCloud account on another Mac or device you can make limited use of it with Snow Leopard - details here.
    To make full use of iCloud you will have to upgrade your Mac to Lion or Mountain Lion, provided it meets the requirements.
    The requirements for Lion are:
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space
    To purchase it you will have to ring Apple at the number given at the bottom left of this page.
    The requirements for Mountain Lion are:
    OS X v10.6.8 or later
    2GB of memory
    8GB of available space
    and the supported models are:
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    Xserve (Early 2009)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    It is available from the Mac App Store (in Applications).
    You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table
    (If in fact you are running Leopard and it is an Intel Mac you will have to upgrade to Snow Leopard to access the Mac App Store - it's available in the online Apple Store. However if you have a PPC Mac you cannot run Snow Leopard and cannot proceed further.)

  • I'm running iCloud on a Windows 7 PC. Photoes have been autmatically uploaded from my iPhone. However, the "Photoes" ICON does not load, and I receive an error message of a problem. Then the ICON disappears. How can I access my photoes?

    I'm running iCloud on a Windows 7 PC. Photoes have been autmatically uploaded from my iPhone. However, the "Photoes" ICON does not load, and I receive an error message of a problem. Then the ICON disappears. How can I access my photoes?

    Same issue here,  previously did work perfectly

  • Can't access icloud due to long running script

    keep getting this error message when logging on to icloud to access my email:
    can't access icloud due to long running script
    And if I do get logged into icloud and try to open the email application I can't open my email or any other applicationii.
    HELP

    Welcome to the Apple Community.
    Delete your mail account from Mail preferences and set it up again using the Mail Server Information.
    Some users have apparently encountered issues using this information in pre-Lion set ups (I haven't), Roger Wilmut has kindly provided instructions for those who find themselves with this problem.
    Entering iCloud email settings manually in Snow Leopard or Leopard
    Entering iCloud email settings manually in Tiger

  • Have itl and xml files on external hd am running home premium. can  no longer access files, am told this is because they were created with a newer version of itunes. also when i try to download 10.3 it wont, just says invalid drive j and for me to try aga

    i am running vista home premium on desktop and vista basic on laptop. have placed my itunes music with .itl and .xml files onto external drive connected to another desktop running vista and can no longer access music on first two mentioned comps only on the one connected to external drive. always am told that the library cant be read because it was created using a newer version of itunes. have tried to download 10.3 but it always tells me that i have and invalid hard drive j and to try again. any ideas?

    Older versions of iTunes cannot read libraries created with newer versions of iTunes. You need to have the same version of iTunes on all your PCs. Is that the case?
    As far as the problem installing iTunes goes, see this article from b noir on dealing with the problem:
    https://discussions.apple.com/thread/2450004
    If you get to the point where you need the Microsoft Installer cleanup utility, you will need more help as it has been withdrawn by Microsoft. but I am hoping the virtual drive trick will work,

  • Can I access my music library on a 32bit PC running Win Vista Home Prem from a 64bit Laptop running win 7 Pro.

    Can I access my music library on a 32bit PC running Win Vista Home Prem from a 64bit Laptop running win 7 Pro.I can logon to  iTunes from the laptop but can't download my previous purchases thru the wifi.

    Miketroach wrote:
    Can I access my music library on a 32bit PC running Win Vista Home Prem from a 64bit Laptop running win 7 Pro
    Yes.
    The following article(s) may help you.
    Troubleshooting Home Sharing
    Security Software Issues
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Wifi Diagnostic Software (for Mac users)
    You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
    When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

  • SQL Server reporting server 2005 having error. 'The report server is not responding. Verify that report server is running and can be accessed from this computer'

    Hi team,
    I got below error message in SQL Server 2005 reporting service.
    ''The report server is not responding. Verify that report server is running and can be accessed from this computer'
    also in reports, i am getting below error:
    "The encrypted value for the "LogonCred" configuration setting cannot be decrypted. (rsFailedToDecryptConfigInformation)
    Get Online Help
    The report server has encountered a configuration error. See the report server log files for more information. (rsServerConfigurationError)
    Get Online Help "
    Please find below log:
    <Header>
      <Product>Microsoft SQL Server Reporting Services Version 9.00.4060.00</Product>
      <Locale>en-US</Locale>
      <TimeZone>Eastern Daylight Time</TimeZone>
      <Path>F:\Program Files\Microsoft SQL Server\MSSQL.6\Reporting Services\LogFiles\ReportServer__07_28_2014_09_08_41.log</Path>
      <SystemName>MFLDDDBS04</SystemName>
      <OSName>Microsoft Windows NT 5.2.3790 Service Pack 2</OSName>
      <OSVersion>5.2.3790.131072</OSVersion>
    </Header>
    w3wp!webserver!1!7/28/2014-09:08:41:: i INFO: Reporting Web Server started
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing ConnectionType to '1'  as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsSchedulingService to 'True'  as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsNotificationService to 'True'  as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsEventService to 'True'  as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False'  as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsWebServiceEnabled to 'True'  as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing ProcessRecycleOptions to '0'  as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonFlags to '1064'  as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException'  as specified in Configuration
    file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException'  as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing SecureConnectionLevel to '0'  as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DisplayErrorLink to 'True'  as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WebServiceUseFileShareStorage to 'False'  as specified in Configuration file.
    w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Reporting Services starting SKU: Enterprise
    w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Evaluation copy: 0 days left
    w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information., CryptUnprotectData:
    Win32 error:13;
     Info: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
    w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted., ;
     Info: Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
    The report server has encountered a configuration error. See the report server log files for more information.
       at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.UnprotectData(Byte[] data, Int32 dwFlags, Boolean transitoryData)
       at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.LocalUnprotectData(String data, Boolean transitoryData)
       at Microsoft.ReportingServices.Diagnostics.RSConfiguration.DecryptCatalogData(String encryptedData, String element)
       --- End of inner exception stack trace ---

    Hi Vivek,
    In Reporting Services, values for LogonUser, LogonDomain, and LogonCred are created when the report server connection is configured to use a domain account. As to the error that “The encrypted value for the "LogonCred" configuration setting cannot be decrypted”,
    we can know that it relates to the domain account for report server connection.
    To fix this issue, we can refer to the following steps:
    Log in to SQL Server Database Engine in SQL Server Management Studio.
    Under Security folder, give sufficient permissions for your domain account.
    Open your Reporting Services Configuration (go to Start -> All Programs -> Microsoft SQL Server 2005 -> Configuration Tools -> Reporting Services Configuration)
    Navigate to the Database Setup tab, select ‘Service Credentials’ as the Credentials Type, then type your domain account and password in there. Press Apply.
    Restart the Report Server services.
    Reference:
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/2d05b404-83aa-4fb2-bba6-52b587e890ec/sql-2005-rs-configuration-tool-encryption-key-error
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

Maybe you are looking for