3.1.3 battery percent gone crazy
BRAND NEW 3GS 16 gig, version 3.1.2, 2 days old, IS NOT JAIL BROKEN!! HERE is what happens, I turn it off while battery at 25 percent, then power back on, shows 12 percent, and LOW BAT DISMISS window pops up. If I let it sit for 3 seconds, the percent will jump back up to 25 percent on its own!! My wifes will be at 59 upon power down, then at 42 upon powering on, then CORRECTS itself after 3 seconds??? MUST BE a 3.1.3 gliche! I bought 2 BRAND NEW 3gs, 2 days old, BOTH of them were fine before the 3.1.3, now, they BOTH have this battery percentage problem!! PS Apple, I paid $397 x 2 for them (plus a contract extension), I WANT THIS FIXED or they are goin back to Walmart!! I have 15 days to return them... Why the HE_ _ can't you guys put a ROLL BACK feature on Itunes?!? Apple is putting WAY to much into this "security" thing, worried SOMEONE might get over on them..
denmapl wrote:
BRAND NEW 3GS 16 gig, version 3.1.2, 2 days old, IS NOT JAIL BROKEN!! HERE is what happens, I turn it off while battery at 25 percent, then power back on, shows 12 percent, and LOW BAT DISMISS window pops up. If I let it sit for 3 seconds, the percent will jump back up to 25 percent on its own!! My wifes will be at 59 upon power down, then at 42 upon powering on, then CORRECTS itself after 3 seconds??? MUST BE a 3.1.3 gliche! I bought 2 BRAND NEW 3gs, 2 days old, BOTH of them were fine before the 3.1.3, now, they BOTH have this battery percentage problem!! PS Apple, I paid $397 x 2 for them (plus a contract extension), I WANT THIS FIXED or they are goin back to Walmart!! I have 15 days to return them... Why the HE_ _ can't you guys put a ROLL BACK feature on Itunes?!? Apple is putting WAY to much into this "security" thing, worried SOMEONE might get over on them..
I have noticed mine doing this rarely and I'm sure mine done it before 3.1.3. But has you say 'it corrects itself after 3 seconds' so I cannot see why it is a problem . The iPhone is probably calculating the correct battery level after the switch on and the 3 seconds is this calculating process.
Similar Messages
-
Has Anyone Found a Solution for G5 Fans Gone Crazy?
First of all, let me say that I am a long time Mac user going back to the Mac Plus days so I think I am fairly experienced in the ways of the Macintosh.
I have a G5 Dual 2.0 ghz (Original Version) that is two years old and until last month has worked fine. Then I started getting Kernel Panic every day and the fans have gone crazy, revving up and down until I want to scream.
My local Apple authorized dealer does not seem to be able to fix this problem. They have installed a new Logic Board and 600 watt Power Supply and over $700 in labor in this machine. Nothing has helped and they seem to suggest that I have a software problem. I do not agree with their assessment. I could have bought a new computer for what I have spent so far. As I type this, the fans are screaming full blast.
On the internet, I have found lots of similiar G5 fan problems but nobody seems to indicate if they were able to get the fans to stop racing and act normal again.
I have tried the normal suggestions, Engery Setting to Highest, reset the PRAM, erased my hard drive and reinstalled OS 10.4.6 several times, logged on as a new user. Nothing seems to help. Fans just will not settle down.
I bought this computer as a DEMO model and did not receive the Apple Hardware Monitoring CD. Does anyone know how I can get this disk? Perhaps, it could tell me what is wrong.
Looking for any help with this problem.
G5 Dual 2.0 ghz, PowerMac w ATI x800 video card, 3 gb RAM Mac OS X (10.4.6)Sorry to hear about your problem Robert.
Since you have already started a hardware process with Apple, it's best to just deal with them. We users really can't do much.
I'm sure software has been eliminated by now in your repair process.
The verison of Apple Hardware Test on your install disks is no longer compatible with your firmware and OS version. Only Apple Store folks and techs would have a recent copy. I'm sure they ran it several times by now.
Take your machine back and say it's not fixed, remove your boot drive so they would have to use their own. Try another boot drive and remove the first.
All we can really do. -
I recently updated a app on my iPad 2.it asked me to turn it off then on so I did .now every time I turn it on the apple logo appears then it automatically shuts down an does the same untill the battery's gone ?
You probably need to restore your iPad now. Pay attention to the last part of this kb article where it explains about using recovery mode. You may need to restore the iPad using that method.
iTunes: Restoring iOS software -
Gps gone crazy after 7.1 update
Hi everyone.
I ran my daily routine on a standart route. But after last ios update (7.1) my iphone 5's gps receiver gone crazy. I'm using Runkeeper for keeping data. But I've tried runtastic and moves too. Its all same. I attached a screenshot, so you can understand what I mean. I hope you can solve this problem quickly, because I'm losing money each day that I miss my commitment on the app "gympact".
Thanks(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset -
Photoshop CS5 Shortcuts Gone Crazy
The CS5 shortcuts were working fine for the past 2 weeks but now have gone crazy. When I hit Shift + F6, it flips my slection horizontally when it should bring up the Select > Modify > Feather. When I hit Shift + F5, it should bring up the Edit > Fill dialog box but instead it does a Select > Modify > Grow.
I deleted the PS Prefs file but that did not work. Anyone else have this issue? Any suggestions on how to fix it?
Thanks & Regards, MurrayZeno, no,I did not reprogram any and I checked Edit>Keyboard Shortcuts the list is as it should be - Shift+F5 still shows as Fill; Shift+F6 still shows as Feather;
Other wrong shorts:
Shift+F7 now functions as Transform>Flip Vertical
Shift+F8 now functions as Transform> Rotate 90 deg CW
Shift+F9 now functions as Transform> Rotate 90 deg CCW
None of these incorrect shortcuts shows up in the Keyboard Shortcuts table. There are no other keyboard shortcut configurations other than the PS default table.
As mentioned earlier I have has CS5 installed for 2 weeks now and used the Shift + F5 for Edit>Fill about 50 times a day. I used Shift + F6 to feather a few times as well.
Thanks and regards, Murray -
IdeaCentre A310: Screen's gone crazy
I've been using my A310 for 7 months without any problems but suddenly the screen's gone crazy. The touch controls (on the bottom right hand side of the screen) don't respond to touch any more, but the on-screen menu for managing the display keeps popping up and making random changes to the screen settings. I've downloaded and installed the video driver on the Lenovo support site but it doesn't help. Any suggestions?? It's making the machine entirely unusable (not least because it occasionally chooses to switch the display off for periods of up to an hour!!).
Any help or suggestions gratefully received, before I send it back under warranty.......hey Benj11,
try uninstalling the video drivers, let Windows install its generic drivers and update the bios.
if these does not resolve it send it to the service center
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article. -
Mail has gone crazy. Header's and messages are mixed up. New Mac Book Pro. Migrated files from Time machine running snow leopard. Reinstall or new computer needed?
Ok; I'm not sure what you're doing. 36 hours is rather long. Seems like a new migration. Not what I intended.
Here's what I intended: from the newly-migrated and apparently-corrupt environment, create a new user, not related to any existing user, nor any migration-created user, or any other user for that matter. That is, use > System Preferences > Users and Groups, authenticate yourself by clicking on the padlock, and then click the + and create a wholly new user. Then log in under that user and establish the mail access.
36 hours? I'm wondering if there's an error or an exceedingly slow network here? Or a really, really slow disk? Or a sick backup? (WiFi isn't the path I'd usually choose, either.)
Failing the attempted second migration, I'd try a different tactic. Does your existing (old) system work? If so, I'd bypass the backup and connect an external (scratch) USB disk drive to the (old) sstem and then boot and use Disk Utility booted from the installer DVD disk or boot and use Disk Utility from the recovery partition or booted from a recovery partition created on some other external storage (details here vary by the OS X version and what hardware you have), and perform a full-disk backup of your original internal disk to (scratch) external storage. (Make sure you get the source and target disks chosen correctly here; copying the wrong way — from the scratch disk to your existing disk — will clobber your data!) In esssence, this will clone your existing boot disk. Then dismount the (formerly-scratch) external disk, transfer it over to the new system, and use it as the source of the migration, by performing a fresh OS X installation on the new system.
Target Disk Mode is also sometimes an option for accessing the disk for a migration, but that requires the right cable, and requires systems that have the same external connection; newer MacBook Pro systems use Thunderbolt for this, and older systems tend to use FireWire. And I'm guessing you don't have compatible hardware.
The details here can and do vary by your OS X versions and your particular Mac systems — if you'll identify the specific models and hardware, somebody might be able to better tailor the above (fairly generic) sequence to your particular configuration. -
All,
This another question regarding my app, which has a main frame that contains Tabbedpane and have desktopPane attached inside. Within desktopPane I have multiple JInternalFrame. In each internalframe a textarea is attached for taking user input and displaying server feedback (the textarea has private classes that telnet to the server to do the input and output stuff).
I was testing my app last night and found out following problems:
1.) Memory just gone crazy! I opened several internal frames and did "cat *" on each of them just to test it out. I noticed the memory just gone crazy and the app become really slow responding. after I close the internal frames speed start getting better but memory is still not being released.
2.) I use InputStream.read() to read single byte from input stream. the return is an "int", I first convert it to a "char" and then cast it to a "string" then use the JTextArea.append("string") to append it to the textarea but it displays a little square after I press enter each time.
I appreciate your time and advise, thank you.You can allocate extra memory to a Java program by putting something like
java -Xmx256m Myclass
That should tell you if running out of memory is really your problem.
Memory from abandoned items isn't recovered until the JVM decides to do a "garbage collection" which it doesn't usually bother with until it finds memory a bit tight.
You shouldn't cast byte input to char. In Java a character is a 16 bit UNICODE code value, and it's relationship with bytes depends on the "character encoding", by default the one native to your operating system.
If you want to read character input from a file etc. then use a Reader not an InputStream. If necessary you can "wrap" an input stream in an InputStreamReader object.
If you want to read it from the user in a Swing program then use an input field of some sort. -
Colours in one catalogue gone crazy!!
Just recently, my main catalogue I regularly work in has gone crazy with it's colours. Peoples lips are a very over saturated pink, as if the have lip stick on. Anything pink is completely blown out. I fixed it last night by changing to a different catalogue, then changing back, but tonight it seems to be stuck on crazy colour mode.
Any idea's, and it's not my system colour management, as everything else is displaying perfectly. Only problems with this one catalogue.Just recently, my main catalogue I regularly work in has gone crazy with it's colours. Peoples lips are a very over saturated pink, as if the have lip stick on. Anything pink is completely blown out. I fixed it last night by changing to a different catalogue, then changing back, but tonight it seems to be stuck on crazy colour mode.
Any idea's, and it's not my system colour management, as everything else is displaying perfectly. Only problems with this one catalogue. -
I've got a HP2605dn and it works great up to today. The display has gone crazy. Is there a hard reset for the printer to resent it's memory?
Looks as if you've a graphics card and/or screen problem - I would lean more towards the GPU.
You should take the machine into your local Apple Store or an AASP and have them evaluate the problem. This diagnosis should be free as should an estimate for repair (if you're not still under warranty).
Good luck,
Clinton
MacBook Pro (15-inch Late 2011), OS X 10.??, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display -
I am not sure what has happened but sometime over the past few weeks my play counts have gone crazy. I have songs that are reporting a play count of between 265 and 769. Obviously these are not even close to correct (especially since the next closest number is like 20). Is there any reason this might have happened? Is there any way to correct this information without resetting the play count for those tracks completely?
Thanks!Many thanks again. I do not understand the concept of 'using the script' on the page you refer me to: I am not terribly technical! Basically, I don't understand the comment 'Save the text of this file and add the extension .js and put it in your script folder and run the script in Window > Utilites > Scripts >' How do I save the 'text of this file', and does this refer to everthing that is in the box, beginning '//blind Open' and ending '}'? What is my 'script folder' and how do I find it? Is this a folder in InDesign, or Windows (I'm running Windows 7, 64bit).
I did try to open the 124 byte file (sorry, I said 124 KB by mistake), and got an error message that it could not be opened. Also, as a check I exported a much smaller file (1244 KB, as opposed to the 'problem' file, which is 5668 KB), and the resulting file was 48 KB.
Thank you again for trying to help! -
my ipod shuffle 4th gen bought today and the voice over works for naming playlist and battery percent but wont name song and artist can anyone help also is the voice over button meant to be soft when pushed ?
thanksThis document explains setting up and using VoiceOver.
http://support.apple.com/kb/ht4322
The overall settings for VoiceOver is on the shuffle's Summary screen in iTunes.
Artist name and song name - Press and release the VoiceOver button.
The playlist menu - Press and hold the VoiceOver button. -
Well, i bought my iphone about 3 months ago and i activated it about 1 and a half month ago, because i bought it in the usa and the activated it in another country, anyways since the first day i activated my iphone it has gone crazy ican't unlock it when i have to slide it at the beginning sometimes it opens apps alone, it types alone sometimes my iphone is completly good but then it goes crazy. Then i was going crazy with my iphone so i dicided to reset it, after i did such thing the iphone was still crazy, Then an update (IOS 6.01) came and i thought that the update will save my iphone by fixing this problem but it was exactly the same. please help me because my country doesn't provides an apple store where i can have apple support.
here is a video that i found that had kind of the same problem as my iphone: http://www.youtube.com/watch?v=pgnkWjGvkYo
HELP HELP HELP PLEASE I REALLY NEED MY IPHONE.Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If basic troubleshooting does not resolve, take the device to Apple for evaluation and possible replacement.
Be aware that the iPhone warranty is NOT International. You will need to either return to the US with the device and take it to Apple or ship it to someone you know in the US to take it to Apple. -
Help, my system has gone crazy!
My imac G5 running Leopard, 10.58 Processor 18 GHz, Memory 2GB has gone crazy. I cannot open ITunes. If I try to download a small file it says my memory is nearly full and I need to clear disk space. Okay I have a few songs on iTunes and 7,900 photos on iPhoto, but that is all. I try to open a document in Word and it says 'you are working without a Word work file and your memory is nearly full'. I am not receiving e-mails when I know they have been sent. What is happening?
Don't worry about Filevault, likely you're not using it if you don't know what it is, but...
http://en.wikipedia.org/wiki/FileVault
Less than 2GB free is very dangerous, you could loose everything as it's not really free space for our use.
An 80GB drive is really too small for later versions of OSX, you need to free up at the very least another 10 to 20GB. -
I have a 3Gs that has gone crazy. Out of a sudden, voice control starts, plays music and even makes calls sometimes, the phone starts switching between applications (closes and opens them) and I can't do anything to stop it even when I touch the cancel button. It does this over and over again. At the same time this problem happened, the home button stopped working. Well it works sometimes when I restart the phone but not always. I don't think it's a matter of pressing the button hard because when it works, it's always the same press I use as before.
I upgraded to iOS4 but the problem still exists. I hope someone out there can give a hand.
ThanksI did restore the device couple of times and I still have the same problem .. And on more thing, everytime I restored it, I get a msg on iTunes that the device is in recovery mode and that I had to restore the device!!
Maybe you are looking for
-
How to set up Dynamic Variants for job which is based on Pay Period
Hi, We need to set up dynamic variant for payroll interface. This interface is based on Pay periods and that is why we need to use different variant for each month. Letus know how to set up dynamic variant which will take care of Pay Periods
-
What is better when converting analog video for FCE, Canopus100/110/300/or5
All, What is better when converting analog video for FCE, Canopus100/110/300/or500? I have a new MACPRO with FCE HD and I wanted to convert some of my older video that was recorded on a HI8 Camcorder... Thanks.
-
Formatting a string and number?
I have a to use the method toString() which calls getPay(). getPay() gives a double value of the employee pay. This is what I have for the toString() method: abstract class Employee{ private String name; private double pay; Employee(String n) name=n;
-
Crystal Reports Server XI - webpage look, code question
Hi! I wanted to increase the height of the 1st row (ROWS=57) in the frame of the Central Management Console Login page and the Central Management Console page itself. This should be the top frame with the file "gradient.gif" as background. URL: http:
-
I have an Feb 2011 15 in MBP, OSX 10.6.8. The first disk I used for TimeMachine (before learning about CCC) is a WD EliteBook, 1 TB, USB 2.0. Reformatted as GUID, 500 GB TimeMachine and 500 GB NTFS (trying to use it as Windows data backup -- hey ...