3.1 Update and MMS Update All Working FIne

Seems no one posts unless there is something to complain about!
I waited until today to update my 2 iPhones (both 3G) due to all the problems posted here.
I am happy to say that the updates went fine, no slow downs and MMS works as it should.
Thank you Apple!

day two, no issues with either 3G iPhone. MMS works as it should. Very cool.

Similar Messages

I can't send emails from Mail. I have three different accounts set up and have the same problem with all. The mail just sits in my outbox. All worked fine until Yosemite upgrade. Recent update has not fixed problem.

I can't send emails from Mail. I have three different accounts set up and have the same problem with all. The mail just sits in my outbox. All worked fine until Yosemite upgrade. Recent update has not fixed problem.

I have been experiencing the same problem. My mail app won't even open on my Late 2011 Macbook Pro. It will show as open, but the app will never actually show up.

Since updating to mountain lion i-movie reports not enough memory to send video to Idvd,I know there is ample memory as i have the full amount of memory installed and it is all working,help pls

Since updating to mountain lion,Imovie reports theres not enough memory to export to Idvd,I know this is not correct as i hve the maximum amount of memory installed and it is all working,i had no such problems when using Snow leopard,help pls.

Since updating to mountain lion,Imovie reports theres not enough memory to export to Idvd,I know this is not correct as i hve the maximum amount of memory installed and it is all working,i had no such problems when using Snow leopard,help pls.

Hi there I have a iPhone 3G and it was with O2 but needed to go onto 3 network so someone on my local market unlocked it and the phone was working fine until I tried to update it through iTunes and it always now stops loading towards the end with an erro

Hi there
I ha
Hi there I have a iPhone 3G and it was with O2 but needed to go onto 3 network so someone on my local market unlocked it and the phone was working fine until I tried to update it through iTunes and it always now stops loading towards the end with an error is there a way to get the phone working again please.

Shame you had the iPhone hacked as O2 usually unlock their customers iPhones happily.
We cannot discuss your problem as it is in breach of the Ts&Cs you agreed to on registering
However hint ....you have probably trashed it

HT204053 I recently changed my e-mail account. I had to reset my apple I.D. and password. All was fine, now when I attempt to login to install updates it shows my old I.D. I don't understand this because when I go into settings it shows my apple I.D. as m

I recently changed my e-mail account. I had to reset my apple I.D. and password. All was fine, now when I attempt to login to install updates it shows my old I.D. I don't understand this because when I go into settings it shows my apple I.D. as my new one

I think what is happening is that you changed the email address for password recovery to the new one - the Appleid (and software "attached" to it) remain irrevokably linked to the id you purchased it with.
Regards,
Shawn

HT201365 I updated my Apple 4s to the latest update. Worked fine yesterday and today I am locked solid ...asking for "enter passcode" As far as I know I never had a passcode. I am the only owner of this phone and I cannot do business or use my phone. Fru

I updated my 4s to the latest update. Worked fine yesterday and this morning I'm totally locke. It's demanding a passcode and I don't think I ever had a passcode. How do I find it? I need my phone desperately for my business. I am the only owner of this phone. Help!!

You cannot retrieve passcode if you forget.
The only way is to wipe iPhone through iCloud and then restore from backup.
https://www.icloud.com/#find

So I just bought an iPhone 5s and Touch ID was working fine until the software update is that a bug ? Because I don't think my home button broke

So I just bought an iPhone 5s and Touch ID was working fine until the software update is that a bug ? Because I don't think my home button broke

Have not heard of that but here is what I would do - test after each step to see if the problem is solved
1. Restart or reset your iPhone, iPad, or iPod touch - Apple Support
2. If that does not work - back up to iTunes and restore to factory settings
3. Check to see if the problem is resolved before restoring from backup

HT1311 Have changed my Apple id to a new email address. its all working fine on my pc and also comes up with the new id on my icloud page on my iphone, but when i tryto buy something from i tunes on the phone the sign in box still has the old id. how do i

Have changed my apple Id to a new email address. its all working fine on my PC and also on come up with the new ID on my icloud page on my iphone but when i try to buy something from itunes etc on my phone, the log in box still contains the old id.
how do i change this?

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
It doesn't sound like you "changed" your Apple ID, sounds like you created a new one. Bad idea. All content bought with an Apple ID is forever tied to that ID. The ID that bought the content is the only ID that can update the content. Apple does not merge IDs not does Apple transfer content from one ID to another.

975x and Raid .. Works fine for me with all bios

I just glanced at the Bios thread to look something up (I forget what) and was stunned to see the posts there...
Why are people being discouraged from using Raid with the Official bios ver 7.3 (or any other bios) ?
If there was a problem using Raid with an official bios, especially one that gets auto updated, this board would be swamped with complaints..
I have never had a problem with Raid on this board..
And most of you that know me, know that I test almost every bios that comes out..
I don't have to reinstall my raid after installing a new bios...
Okay... sorry .. had to rant...
I don't have a step by step of "how I set up my Raid" but basically here is what I did..
(Please note, everyone has their own prefered method for installing an OS on a raid)
No matter what bios I used, I would have my "working" OS on an IDE drive...
I would then reboot, go into my bios, set my Sata to Raid (set forcegen to whatever you want)
f10 to save the setting and when the reboot happens, I try "control + I" to get into the Intel panel..
If I don't get the Intel Panel, I just reboot again, go in the bios, disable jmicron (my IDE drive will still work), and ...
f10 to save setting, and try "control + I" to get into the intel raid panel, if you can't get into the panel, something else is set wrong in your bios or your SATA drives aren't set up properly..
Once I created my raid, I would boot into my OS (on my IDE drive)...
My OS will find the raid and want to install a driver, ignore that, and just install the Intel Raid software..
Then I would either migrate my OS to the newly formed Raid drive using a tool like Data Lifeguard (that is Western Digital's tool for its drives)
Or I would just restore to the raid drive using an OS backup (I used Norton Ghost) and set the Raid drive as a boot drive..
Make sure your raid is formatted as a "primary partition" to be a boot drive...
Now that I have my OS on the raid drive, I just simply reboot, go into my bios, set my raid as the first boot drive and then when my system boots, I am running off my Raid...
As for having my raid running and trying a new bios...
I just flashed from bios ver 7.30 to ver 7.16 booted into my raid (all worked fine) and then flashed back to 7.30 and no problems finding my raid...
The only suggestion that I can offer is:
If you have problems finding your SATA Raid after a bios flash, the problem is most likely jmicron related...
Try disabling the jmicron in the bios (your IDE stuff should work fine unless you are using a Raid on the jmicron ports)..
or just try disconnecting all your drives except your SATA raid
Then see if you can see your SATA raid...
Understand, if there was a problem with running raids with this motherboard, there would be posts everywhere..
Somehow, either the way you created your raids, your bios settings, or the way your jmicron is implemented is causing problems..
Hope this helps someone...
I know I am gonna get blasted for this post...
But I don't think I am the only one running a SATA raid using bios ver 7.3
I just think that those with working Raids, don't look at the Official Raid thread since it looks like a "How to" thread...
I am sorry (in advance) if I offended anyone with this thread...

Hey Vaniireq
1. Thanks for that info - Perhaps the forum modrerators would see more of the issues coming to light with RAID if they changed the topic in the stickies from HOW TO install Intel Matrix Storage Driver Guide to MAIN RAID ISSUES and put in a subthread on HOW TO install Intel Matrix Storage Driver Guide
2. I have always kept the JMD disabled as nothing on BIOS 7.1 would work for me in raid when otherwise.
SUGGESTION: I suspect that many when starting to look at the forum have no idea what there is in the "HOW TO install Intel Matrix Storage Driver Guide " thread - as it does not mention RAID that clearly.
Just a suggestion.
I am about to do the 4 hour check and attempt to get back to dual channel 800 with my system. Will advise....
Good weekend all......... Keith

HT5642 Upgraded this morning. All worked fine for about 30min then "no service". Still the same problem and a reset of the device only fixes the problem for 15min. then we are back to no service?? When will apple fix this???

Upgraded this morning. All worked fine for about 30min then "no service". Still the same problem and a reset of the device only fixes the problem for 15min. then we are back to no service?? When will apple fix this???

Tried to reset network settings ...only fixes it for 15min. Did a firmware restore and a clean new phone setup. no settings restore. still have network service after around 60min. still running 6.1. i do get a prompt that i have to update settings to LTE. Have not excepted the settings as yet. Cellular data is still set to 3G....

TS1702 i have a ipod touch 2g and after a restore none of my apps will restore because it says that i need a newer version of the ipod software to run them they all work fine till i did the restore . is there any way to get them back ?

i have a ipod touch 2g and after a restore none of my apps will restore because it says that i need a newer version of the ipod software to run them they all work fine till i did the restore . is there any way to get them back ?

Your only way is if you have the version that was compatible on your computer such as in the recycle bin/trash or in a computer file backup. In that case delete the current version that is in your iTunes App library and replace it with the older version. Then sync.
Also see:
Recover Older Versions of iPhone Apps After Updating — Apple News, Tips and Reviews

I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.

I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.

I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.

HT4600 i Get a solid amber light sometimes, bUT all works fine. I have to unplug the airport extreme to reset it and then it turns green and starys that way for a week or so and then turns back to amber. why is this and how do i fix it ?

I gat a solid amber light once a week on my airport extreme, but all works fine. I have to unplug it to reset it and then the light turns back to green and it is good for another week and then it happens again. why is this and what can i do to fix it ?

Solid amber on an AirPort Extreme is an indication that the internal power supply is starting to act up.
If the AirPort Extreme is in warranty, it shouid be exchanged for another AirPort Extreme.
If the AirPort Extreme is several years old, keep any eye on things. When/if you find that you are having to reset the device several times a week, it's time to start thinking about a replacement device, as the end is near.

Imac 10.7.5 doesn't recognize iPod touch 32gb 5th gen, iPad and iPad mini all work ok

imac 10.7.5 doesn't recognize iPod touch 32gb 5th gen, iPad and iPad mini all work ok.
Itunes 11.3
7.1.2 iPod touch 32gb, V/ 5th generation
I just don't get it. I got the iPod from a friend which didn't use it at all. If I connect my iPad or iPad mini to my mac, they all get connected well and iTunes sees them too. iPod touch not for some reason
The iPod touch is completely new, no missing contacts etc. It works on other macs as well. Only my iMac doesn't see the iPod Touch. Maybe I can repost this problem in The IMAC section in stead of the iPod Touch, since I think its a iMac problem from now on...
please help!

Iphone 5 lightning port charging problem - SOLUTION!
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

My ipad 2 touchscreen doesn't work on most of the screen it got cracks all down the left side of my ipad and it has been working fine for a year after cracking but just woke up and touchscreen doesnt work i have tried to reboot it but still nothing

my ipad 2 touchscreen doesn't work on most of the screen it got cracks all down the left side of my ipad and it has been working fine for a year after cracking but just woke up and touchscreen doesnt work i have tried to reboot it but still nothing

It might be time to contact Apple for an out of warranty repair (actually replacement)
See here: http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Replacement for any model iPad 2 is $249

3.1 Update and MMS Update All Working FIne

Similar Messages

Maybe you are looking for