3.1 upgrade problem:  Post Element Text does not align properly - DUPLICATE

Duplicated in error - problem with browser. Please remove this one.
Thank you.
Message was edited by:
Thomas 8246

Duplicated in error - problem with browser. Please remove this one.
Thank you.
Message was edited by:
Thomas 8246

Similar Messages

  • I have just downloaded Yosemite but I find that Photoshop Elements 11 does not work properly. If I use a tool like a paint brush or spot healer I cannot paint a full stroke?

    I have just downloaded Yosemite but I find that Photoshop Elements 11 does not work properly. If I use a tool like a paint brush or spot healer I cannot paint a full stroke does anyone else have this issue or know a solution?

    Many thanks that does work. But it now leads to another question is this simply a trackpad issue and if so will it be fixed? I use Elements every day and was thinking I would have to go back to Mavericks.

  • Avery Barcode labels does not align properly when printed from Adobe Reader 11.0.0

    Hi,
    I have barcode labels in a PDF (Version 1.4, Acrobat 5.x). PDF producer is PPAlambic(Distiller). When I try to print the PDF on to Avery 5160 sheet containing 30 labels (10 rows; 3 labels in a row), always the barcodes on the first column goes beyond the left margins and hence does not print the full barcode. PDF size is 8.5" * 11" .I have tried following options in Print dialog box:
    1. Actual Size + Portrait + Letter size
    2. Shrink oversized pages + Portrait + Letter size
    3. Fit + Portrait + Letter size
    None of the above options resolved my issue.
    When I open the same PDF in Adobe Reader 11.0.07, it prints perfectly. Does someone help me understand if this is a known defect in Adobe 11.0.0 and is there any workaround in 11.0.0 itself to adjust the alignment?
    Note: PDF is not editable as it comes from a third party vendor. Please help.

    Hi,
    I have barcode labels in a PDF (Version 1.4, Acrobat 5.x). PDF producer is PPAlambic(Distiller). When I try to print the PDF on to Avery 5160 sheet containing 30 labels (10 rows; 3 labels in a row), always the barcodes on the first column goes beyond the left margins and hence does not print the full barcode. PDF size is 8.5" * 11" .I have tried following options in Print dialog box:
    1. Actual Size + Portrait + Letter size
    2. Shrink oversized pages + Portrait + Letter size
    3. Fit + Portrait + Letter size
    None of the above options resolved my issue.
    When I open the same PDF in Adobe Reader 11.0.07, it prints perfectly. Does someone help me understand if this is a known defect in Adobe 11.0.0 and is there any workaround in 11.0.0 itself to adjust the alignment?
    Note: PDF is not editable as it comes from a third party vendor. Please help.

  • Lion text problem: Some text does not display properly in Safari and Firefox

    Hello
    Some text in Safari and Firefox is seriously degraded, making it useless. I changed to Firefox because Safari was displaying wrongly, but Firefox displays the same way, so it seems to be an OS problem. See image as an example:
    I cannot see subtitles on BBC streamed movies, and the timing of the movies on the bottom ribbon do not display correctly.
    I am using Lion 10.7.5
    Is there a solution for this problem?
    Thanks for any help.

    Unbelievable (and I still cannot believe that) - is wmode="transparent/opaque/etc" - not supported by safari ? then how do you suggest we go about transparent flash elements on web pages? why isn't it working on safari while on every other browser on earth it does?

  • Photoshop Elements 10 does not work properly, won't open; Error:213:11 ; What does that mean?

    I've downloaded and installed my version of PS Elements, but while I try to open it, it stops working as an error accurred. Error:213:11
    I don't know what I did wrong while I got all my licences...

    Well, this is not working either. There is no such folder and I wonder why. Otherwise I would have tried this before.
    Guess my version's too old? I tried to run on my Win7 and the data is from year 2011.
    Though I re-installed it but still there was no SLStore-Folder on my PC. It's a bit strange though and I cannot update the program while it's not working.

  • PDF text does not display properly

    My coworkers made a PDF (using Acrobat Pro and MS Office on Windows) that displays properly in Windows, Mac, Android, and iPad (iOS 6). However, on two different iPhones (v3 with iOS 3, v4 with iOS 5) the PDF displays with no text and only black gradient rectangles where the first line of each paragraph should be. The backgrounds & graphics look normal.
    Inspection in HexEdit and Acrobat Pro show it's in PDF 1.5 format, all fonts are embedded subset.
    Any suggestions?

    According to here, here, here (iPhones specification pages) and here (an article from NYTimes) iPhone can read .pdf files with any iOS version.
    But in your case... Sorry, I don't know more than it... I have different kinds of PDFs on my devices (iPhone and iPod Touch) but I never saw something like it...

  • After Upgrading to FF 7, FF does not close properly. I Receive the error "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system" after closing FF and Re-Opening

    in order to open FF a second time i need to manually close the process. i have disabled all plugings

    Hi Pelle,
    Why did you delete your profile? Also how? Did you use the profile manager or did you delete from the windows file structure?
    It sounds like something during the profile delete has stopped Firefox from starting up. Please see the this article and follow the steps:
    Please see this article: [http://kb.mozillazine.org/Profile_in_use]
    --Edward

  • View objects, view links, does not search properly

    Hi,
    I am using Jdev 11.1.2.0
    I have created a search criteria based on view objects and view links. It has entities and entity associations as base. The structure is as follow:
    vo1 ->vl (1 to 1) - > vo2
    ->vl ( 1 to many) -> vo3
    Any search attribute which is not from vo1 return bad result. It happens in running app module and in the jspx page. In app module, it sometimes complains about populating the wrong attribute for the named criteria.
    The search criteria is using "exists" statement for vo2 and vo3 for adding the conditions. It has many attributes within the exist statement.
    So what is the problem. Why it does not join properly? Why does it return bad result when search attribute is from vo2 and vo3? Please help.
    Any more information requires to solve the problem?
    Thanks,
    Arthur

    Hi,
    Two more information: vo1 is composed of Entity1 (1..M) Entity2 and Entity1 (1..1) Entity 3. vo2 is composed of Entity 2 and vo3 is composed of Entity 4.
    I follow the information from http://download.oracle.com/docs/cd/E16162_01/web.1112/e16182/bcquerying.htm#BCGIFHHF
    to create the search criteria.
    Arthur

  • Cannot open install assistant.  I get this error message: The application cannot be installed due to a certificate problem.  The certificate does not match the installed application certificate, does not support application upgrades, or is invalid.  Pleas

    How can I downloade a trial of Adobe Elements 12? 
    I followed the instructions to download assistant...but get this message: The application cannot be installed due to a certificate problem.  The certificate does not match the installed application certificate, does not support application upgrades, or is invalid.  Please contact the application author.

    Hi alposer,
    Please remove the copy of the Adobe Download Assistant you currently have installed and then reinstall the Adobe Download Assistant.
    Regards,
    Rave

  • Post Element Text

    Hi,
    I'd like to use JavaScript to add some post element text to some form items that is based on the content of the form item.
    I know that I could just add some extra items on my page and condition them but I'm keen to avoid this as I don't want to clutter the page with too many items. I'd rather just have post element text that I can condition in some way.
    Any ideas how I'd do this?
    Cheers
    Yog

    Hello,
    Just add something like this. To your post element attribute
    <span id="after_#CURRENT_ITEM_NAME#"></span>
    and lets say your item name is
    HELLO
    you javascript should look like this
    $x('after_HELLO').innerHTML = 'After Hello';
    or
    html_GetElement('after_HELLO').innerHTML = 'After Hello';
    Carl
    Message was edited by:
    Carl Backstrom

  • Post Element Text - Checkbox

    Apex 4.0.2
    Suppose I use the Post Element Text attribute of a page item to render a checkbox using <input type="checkbox" .... and a dynamic action to save its state to a database table. I am sure this will work fine but when the page loads how do I go about setting the value of all these checkboxes?
    Any ideas? Thanks

    Hello Vikas,
    >> I am sure this will work fine but when the page loads how do I go about setting the value of all these checkboxes?
    The trick is to use a checkbox that has the same ID and value. Remember that only checked checkboxes are submitted to the server. You can look at the following for a simple example:
    http://htmldb.oracle.com/pls/otn/f?p=52616:30
    Now for some code. I’m using the following as the post-element content for the first checkbox:
       <input type="checkbox" name="f50" id="CB1" value="CB1">Option 1<br />The HTML name will remain the same for all checkboxes; however, the ID and value should be different for each extra checkbox (e.g. CB2, CB3m etc.). In this example, the checked checkboxes will be populated, at submit time, into the G_F50 array. Of course, you can use any other available G_Fxx array.
    I’m using the following table to save the checkboxes state:
    CREATE TABLE  "CB_STATE"
       (     "PAGE" NUMBER(4,0) NOT NULL ENABLE,
         "VALUE" VARCHAR2(4) NOT NULL ENABLE
       ) ;For saving the checkboxes state, I’m using the following after submit PL/SQL process:
    delete from cb_state
    where page = :APP_PAGE_ID;
    for i in 1..apex_application.g_f50.count loop
      insert into cb_state
      values(:APP_PAGE_ID, apex_application.g_f50(i));
    end loop;For setting the checkboxes state, while rendering the page, I’m using the following Before Footer PL/SQL process:
    htp.p('<script type="text/javascript">');
    for x in (select * from cb_state
              where page = :APP_PAGE_ID) loop
      htp.p('$x('''||x.value||''').checked = true;');
    end loop;
    htp.p('</script>');I’m sure you can translate the last snippet of code to a Dynamic Action. If you do, please post it in here.
    Regards,
    Arie.
    &diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
    &diams; Author of Oracle Application Express 3.2 – The Essentials and More

  • Post-element text with computed value

    I have a page item (P10_X) with post-element text referencing a application level item using &G_ITEM. notation. G_ITEM is computed on the page and the computation needs to take into account the value of P10_X so the firing point is "after footer".
    This leads to a Catch-22 because the item and post-element text is rendered before the computation so the value of G_ITEM is not accurate.
    Any ideas? Thanks

    Not sure I understand. Suppose P10_X=10 when it is rendered. G_ITEM is computed as :P10_X (i.e. 10) + (select ...). The post-element text for P10_X refers to &G_ITEM. so it uses the "stale" value of G_ITEM; the latest value is not computed until after all regions are rendered.
    Edit: Turns out that P10_X obtains it value in an Before Header application process, not via its Source attribute. So I can put the computation for G_ITEM at the After Header point and so everything gets computed and rendered properly.
    Edited by: Vikas2 on Jul 14, 2009 4:05 PM

  • Post Element Text on report items

    I am trying to add an image after an item on a multi row report.
    Was wondering if there was anything similar to the Post Element Text attribute that is available for individual page items??
    I admit to being a little lazy in trying to create a custom popup lov (Displays description, returns key value) in a multi row report without using the htmldb_util.item function (as this would mean having to create my own optimistic locking and md5 computations).
    Was wondering if this was possible and if anyone had done this??

    Vikas,
    just trying to create a multi-row report which has several columns
    one of the columns is hidden and stores the id. One of the visible rows stores a description associated with the hidden id.
    I then want to display the list.gif icon after the description field so that it looks like a popup lov (i will code the popup up stuff seperately). In effect i wish to mimic the functionality provided by htmldb_item.popupkey_from_query without having to also code the optimistic locking you have to when using this in a query.
    what i am thinking is that if my reports select statement is a basic column selection and i can add a href image to the column as a post element text then this will give me the functionality i need with the optomistic locking provided out of the box?
    sorry the concept seems quite easy in my head but quite hard to explain ;-)

  • TS1474 I have already reset my ipod shut it off as well. I have upgraded Itunes and the ipod does not want to show up on Itunes anymore. It used to before but now it doesn't. How do I solve my problem?

    I have already reset my ipod shut it off as well. I have upgraded Itunes and the ipod does not want to show up on Itunes anymore. It used to before but now it doesn't. How do I solve my problem?

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?

  • I am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you

    i am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you

    Did you check your security software (firewall)?
    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
    See:
    * [[Server not found]]
    * [[Firewalls]]

Maybe you are looking for