3.1 useless and now hurting my MBP

Hi,
Installed the new software today when prompted by Apple, lots of problems. The main ones being -
- With iPhone plugged into the MacBook Pro for a few minutes the MBP speaker gives out a loud crack and then I have no sound. The only way to get it working again is to logoff and then log back into the laptop.
- iPhone will not complete backup, now tells me that I have error code -50
- iPhone starts backup and tells me that I am the wrong user, this never happened until today and I am the same as I was yesterday!
Very disappointed with Apple today!

Solved! It took some digging around but eventually I solved this (-50) error problem and no syn between iTunes 9.0 and iPhone 3.1 latest upgrades. The solution for me was to change my iPhone sync settings in iTunes. I usually do not sync from/to iPhoto and this option remains greyed out in my update folder, although it is greyed out the option if ticked would be to sync to iPhoto.
So, I checked the synx box for Photos and changed the folder from iPhoto to My Pictures. I then unchecked the option and synced the iPhone with iTunes, everything worked! I then reset the sync option to iPhoto but then left it unchecked as normal, the next sync then worked fine.
So, the problem is linked to iPhoto sync with iPhone, just change the settings and hopefully it will work if you have the same error (-50) problem.
Best Wishes,
Mickey

Similar Messages

HT203164 Itunes destroyed my ipod (wiped it out and rendered it useless) and now i keep getting a cancelling burn message when trying to burn a cd.

I've tried restarting the IMAPI cd burning service, different playlists, and blank cds. I'm frustrated. Can anyone help? I'm running Windows XP.

Hello there,
It sounds like you are unable to burn a disc using Windows XP. You started with the troubleshooting I would have as well. Next try these steps from the article named:
iTunes 11 for Windows: If you have trouble burning a disc
http://support.apple.com/kb/PH12349
If CD burning stops at a particular song, the playlist might include iTunes Store purchases that haven’t beenauthorized to play on this computer. To authorize this computer, double-click the purchased song (where CD burning stopped) and enter the information for the account that purchased the song. You can authorize up to five computers at a time. For more information, see Authorize a computer to play iTunes Store purchases.
Use Windows Update to make sure you have the latest Service Pack for your computer installed.
Check your computer or drive manufacturer’s site for firmware updates and install any that are appropriate for your computer and CD or DVD drive.
Try using a different brand of media or a different type of disc (for example, CD-RW instead of CD-R).
Try choosing a lower burn speed.
If the issue persists after these things have been checked, I would next try unisntalling iTunes altogether, along with its associated apps and then re install it with this article:
Removing and Reinstalling iTunes and other software components for Windows XP
http://support.apple.com/kb/ht1925
Thank you for using Apple Support Communities.
All the best,
Sterling

How do I delete movies from iTunes library? I have moved them to the iCloud and now only seem to have the option to hide the icon in iCloud. I am sure I chose poorly at the 'keep file' window. Please help. My Brain hurts- 18 movies need to go-.

How do I delete movies from iTunes library? I have moved them to the iCloud and now only seem to have the option to hide the icon in iCloud. I am sure I chose poorly at the 'keep file' window. Please help. My Brain hurts… 18 plus movies need to go…. Thank you.

Instead of removing the music from the cloud or the iTunes library why not shuffle your music using a Smart Playlist which excludes the holiday music, or tracks that are not checked. For example, use this very simple Smart Playlist:

Upgraded to new MBP and now I can't bounce?

I recently upgraded my MPB and now for some reason, when I bounce, the file is empty/silent. I am using all the same gear and the same templates I used on my old computer. Nothing has changed except the computer. I went line by line through every setting with the old computer and everything is the same.
Any insights? I tried bouncing in every format both offline and online. Same results. I also opened the file on my old computer and it bounced just fine.
Help?

Have you tried trashing logic prefs? Or perhaps copy the prefs from your old computer to your MBP, and substitute the current prefs there.
Have you looked in System Preferences... and checked the sound settings?
As a last resort, you can try zapping the PRAM, although that resets every system setting to defaults. Before starting up, press shift-option-p-r (a 'chord') and lift after the second chime.

I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work. Help?

I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work.
^^ that's the main problem. Here's the full history.
I bought a new 13" i5 MBP, early 2011 edition. I had an old white Macbook 2.14 ghz core2duo on Snow Leopard. I attempted to port over my time machine backup, but encountered problems in that my User was inaccessible from the new computer after the import finished, and I had to go in and change the root password, etc, and for some reason or another, I couldn't install any programs at all from that administrator's account. By "couldn't" I mean I could install them, but upon installation they would never boot. So, I took it to the apple store and did a clean install from the most up to date Lion OSX. Then, I created a brand new admin account, instead of trying to import the old one, and things seemed great. Then, I just imported my old files from the TM backup, but not any system settings, permissions, or user data. Just my Docs, pics, vids, apps, and itunes stuff.
Here's where things get weird again. I imported this stuff under the name "old", but all of these folders have a red negative sign on them, marking them as restricted. So, from my main admin account, I cannot even peruse these folders. Since I didn't import user data, I can't sign in to the "old" account to change permissions. I already tried to change the permissions from system preferences, but that didn't change anything. And now, for whatever reason, of all the apps that were imported then, MS Office is the only set of apps that does not work. When I click on it, it just says there was a problem and asks if I'd like to send a report to apple. I tried reinstalling it to no avail. I'm an English student, so i really need access to Word. Can anyone help? The Apple store is a major detour for me and would like to fix this issue myself.

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

Hey i bought a brand new MBP like 6 months ago and now it won't charge

i bought a brand new MBP like 6 months ago and now it won't charge. I tried using a friends MBP charger of the same year as my computer but it still says not charging at the top right corner of the computer screen where the charging symbol is. This problem just happened out of nowhere because it was working the day before then the next day it just stopped working saying it is not charging. I tired doing all of the suggested techniques to fix it but not luck.
This is the battery report is when my MBP is either connected to my charger or my friends charger which works perfectly on her computer.
Battery Information:
Model Information:
Serial Number:          W013*****3BA
Manufacturer:          SMP
Device Name:          bq20z451
Pack Lot Code:          0
PCB Lot Code:          0
Firmware Version:          201
Hardware Revision:          000a
Cell Revision:          158
Charge Information:
Charge Remaining (mAh):          3137
Fully Charged:          No
Charging:          No
Full Charge Capacity (mAh):          5751
Health Information:
Cycle Count:          126
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          0
Voltage (mV):          11528
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          10
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          10
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Wake on LAN:          Yes
Current Power Source:          Yes
Display Sleep Uses Dim:          Yes
PrioritizeNetworkReachabilityOverSleep:          0
RestartAfterKernelPanic:          157680000
Standby Delay:          4200
Standby Enabled:          0
Battery Power:
System Sleep Timer (Minutes):          10
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          2
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Display Sleep Uses Dim:          Yes
Reduce Brightness:          Yes
RestartAfterKernelPanic:          157680000
Standby Delay:          4200
Standby Enabled:          0
Hardware Configuration:
UPS Installed:          No
AC Charger Information:
Connected:          Yes
ID:          0x0000
Wattage (W):          0
Revision:          0x0000
Family:          0x0000
Serial Number:          0x00000000
Charging:          No
As you can see where it is labeled "AC Charger information" it states that its connected but there is no Wattage and says its not charging .
What is wrong with my mac? Is it serious and does Apple Care cover it?

Have you done a SMC
http://support.apple.com/kb/HT3964
Items include
Power
The computer doesn't respond to the power button when pressed.
A portable Mac doesn't appear to respond properly when you close or open the lid.
The computer sleeps or shuts down unexpectedly.
The battery does not appear to be charging properly.
The MagSafe power adaptor LED doesn't appear to indicate the correct activity.

MBP upgraded to Yosemite and now will not connect to Internet using a Cisco router

I Upgraded my MBP mid 2010 to Yosemite and now it will not connect to Internet using a system that involves typing in my user name and password in an auto pop up window provided by Cisco security systems. Before, using Mavericks, it worked perfectly: boot up MBP and the Cisco pop up auto loaded. Typed it my password and hey presto, connected to Internet. Now, zilch. There is nothing wrong with the Cisco cos my iPad connects ok, as do both my iPhone's.
the problem is with Yosemite therefore. Please help. I tried all the usual diags, etc to no avail.
Message was edited by: AWAC

Sounds like there could be some kind of compatibility issue between ICS and this Bluetooth device of yours. Is there any compatibility info from the manufacturer about which Android versions that's being supported?
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Leopard completely trashed my HDD and now won't install on my MBP

I only moved away from Windows in the summer and now I feel I'm no better off. I've just upgraded my new MBP (only a few months old) to Leopard and it failed. Not only did it fail with some Sibling Link error (which fsck_hfs -r and other internet search result recommendations failed to resolve) but it resulted in my having to completely reformat my drive!
I then let the install disk do a format of my drive and install and now I get this "The installer was unable to create the folder BaseSystem.pkg on the volume ...." or words to that effect. So now I have a new MBP that won't boot and won't install an operating system!
What is this? Apple's Vista?
Is there anything I can do to get this operating system to install???

do you have a software install disk that came w/ your computer. If so, load it up, go to disk utility, zero out your HD, and then reinstall the OS from that disk. Leopard absolutely, completely, totally, and irreversibly hosed my pbg4, so much so that not only would it not eject the fri@@@@ Leopard DVD, it wouldn't even cotton pickin' START UP, save for booting into Open Firmware.. I decided that before I trashed it, I'd try one more time to start it up, hold down the **** eject key, to see what happened. I waited 30 minutes to let myself cool off before using the **** thing as target practice and, well, what'd'ya know, it started up, ejected the Leo DVD, immediately following which I inserted the disc for 10.2.7, shut it down, started it up, it booted immediatley into the installer for that OS, I went to disk utility, zero'd out the HD, after which I went about installing 10.2.7. I'm now on my pbg4 w/ that system installed and it's working (so far) flawlessly. What an absolute crock of rat @@@@ Leopard is turning out to be. Oh, btw, on this pbg4 there were no haxies, no 10.4.10 widgets, nothing fancy, save perhaps for Nisus Express and Firefox. I have Leo on a separate HD on my g5 dual 1.8 which is exactly where it's going to stay until all those bright bulbs at Apple can figure out what the **** is going on.
Hope you have better fortune,
tony

I installed the new 7.0 on my ipad and now I cannot get my internet connection to work. Any ideas, I have already tried rebooting but no luck. Another useless apple update that doesnt work?

I installed the new 7.0 on my ipad and now I cannot get my internet connection to work. Any ideas, I have already tried rebooting but no luck. Another useless apple update that doesnt work?

1. Turn router off for 30 seconds and on again.
2. Settings>General>Reset>Reset Network Settings.

Transfer account from old MBP to new one and now my account password does not work.

I trasferred my account from one MPB to a new one using targeted disk method. I left my desk while it finished and came back to a registration page. I registered and the system rebooted. Now I see my login details but the password form my old Mac fails. The hint it gives me also seems to be bogus becaues I've tried many variations of the hint and they also do not work.
I'm submitting this from my original MBP and had not problem using my old password logging in to it. Why didn't my password transfer properly and now how do I fix my new MBP?
I made sure duing the transfer process to select everything for transfer -- accounts, applications, etc. All check boxes were checked.

AKAspuds wrote:
I trasferred my account from one MPB to a new one using targeted disk method. I left my desk while it finished and came back to a registration page. I registered and the system rebooted. Now I see my login details but the password form my old Mac fails. The hint it gives me also seems to be bogus becaues I've tried many variations of the hint and they also do not work.
I'm submitting this from my original MBP and had not problem using my old password logging in to it. Why didn't my password transfer properly and now how do I fix my new MBP?
I made sure duing the transfer process to select everything for transfer -- accounts, applications, etc. All check boxes were checked.
So now you have 2 accounts, logout of this one and in to the other.

How can I get rid of ios6 ? I have had this iPad for less than 2 weeks and,ade the mistle of "upgrading" to ios6 and now my map is completely useless. Feel like I have been robbed

how can I get rid of ios6 ? I have had this iPad for less than 2 weeks and made the mistake of "upgrading" to ios6 and now my map is completely useless. Feel like I have been robbed

There are alternatives. But none of them have Google street view, able to work on iOS 6. Apple should have offered this as a beta version, for a few more months instead of inflicting us with an inferior product. This iPad will probably be my last Apple product. A shame, because until last a few days ago, I thought the iPad and iPhone were fantastic.
Apple should quit their petty squabbling with, Google and Samsung and concentrate on supplying the best product.
Google and Samsung must be enjoying this particular fiasco.

Hi, i have a MBP 13, late 2012. Its over an year old since purchase and now out of warranty. This morning the computer did not boot so i went down to apple store and they looked at it and said its a logic board failure requiring replacement worth£350

Hi, i have a macbookpro 13, late 2012. I bought it last year october and its an year old and now out of warranty. This morning the computer did not boot, so i went down to apple store and they looked at it and said its a logic board failure and needs replacement worth £350. The tech at apple store gave no explanation, why suddenly, my computer decided not to start at all and said to me it was a logic board failure for no apparent reason and requires replacement. I have maintained the laptop in a pristine condition. Now I feel I have been cheated. This clearly means the product is substandard as a £1100 laptop is not expected to fail in just over a year. My last laptop PC which was worth £450 served me for 4 years before it crashed and lived for another 2 years until I decided to get a mac. This is ridiculous. I don't have apple care at the moment which translates as pay to get it fixed. Anybody in my situation ? I want to sue apple for selling me a substandard good . Any thoughts? Should I go for another pc for £500 because there is no guarantee even after the laptop were fixed by apple for £350 it would last for another year. I need a reliable machine.

This morning my MBP just woke up from sleep and is working without any glitches. I don't know what to say about this.

MBP will not start up. was working fine and shut down and put to charge and now will not power back up. Screen will light up and then power shuts back down. Any thoughts?

MBp will not start up. Was woking fine and shut down and put to charge and now will not power back up. Screen will light up but then powers shuts back down. Any thoughts???

Follow these documents.
http://support.apple.com/kb/TS2570
http://support.apple.com/kb/TS1440
http://support.apple.com/kb/HT1455
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/HT1379
http://support.apple.com/kb/ht1379
http://support.apple.com/kb/HT1509

Update software and now all of a sudden Nano useless!!

My Nano was working perfectly. I updated the lastest software per the new itunes software suggestion and all of a sudden my nano does not even get close to working. It wiped all my memory from the ipod and now itunes doesn't even recognise the ipod and windows presents the message "the file or directory /ipod_Control/itunes is corrupt and unreadable. Please run the Chkdsk utility"
I am so fustrated by my 3rd (yes third time) nano that I don't know what to do. Please, PLease Help!!!

I have a 30GB ipod, just loaded latest ipod software 7 onto my laptop and then onto my ipod now ipod useless. Folder with exclamation point appears in window. When I connect it to my computer it tells me that the ipod is corrupted and needs to be restored to factory settings. When I click restore my ipod disappears from the LH screen and the update process stops almost immediately once I click restore. I have removed all ipod software from my computer and then reinstalled 7 and still no change....not really sure what I can do next or if is futile and time to purchase a new one???? Please Help!!
Thanks much, Malteezgrl

HT201210 I have tried all of these issues and it still refuses to contact update server. My phone is useless right now

I can not restore my iphone which is currently stuck in a reboot loop because the update server can not be contacted. I have tried all the remedies suggested.

Mikeya68 wrote:
I can not restore my iphone which is currently stuck in a reboot loop because the update server can not be contacted. I have tried all the remedies suggested.
As you have tried all of the remedies suggested I guess your phone is now useless and there is no hope. But if you post the specific remedies you have tried someone MIGHT notice one that you have missed.

3.1 useless and now hurting my MBP

Similar Messages

Maybe you are looking for