3.12 Bug with WiFi and non broadcast SSID?

I seem to have a bug. I can reliably replicate this on my phone and after talking to others, they mention the same issues.
Setup:
WiFi that does not broadcast its SSID and is protected (could be any protection, mine happens to use WPA Enterprise)
How to replicate:
-> Add the new network, set the network name (ssid), username, password, JOIN.
-> You are joined to the network.
-> Do something that verifies you're on the WiFi network (e.g. visit http://hostip.info in the browser)
-> Set phone down, or sleep it.
-> Wait a few seconds... wake phone.
-> It should re-connect, but won't. It has forgotten the network connection was ever there.
Describing this to others, they say they had to turn on ssid broadcast... this is not an option for me since it's a work network, and it's their security configuration to not broadcast the ssid.
Any help or can we get this confirmed as a bug and get it tracked?
Thanks...

This is a user-to-user tech support forum and Apple doesn't routinely or officially monitor these posts. Apple rarely announces bugs and the other iPhone users here have no more info than you. To report a bug or make a suggestion to Apple, do so on the iPhone Feedback page:
http://www.apple.com/feedback/iphone.html

Similar Messages

Broadcast and non-broadcast SSID issues with iPhones and iPads

We have a CIsco wireless infrastructure configured with a public broadcasted ssid and a private non-broadcast ssid that we are experiencing issues with the iPads and iPhones. The iPad or iPhone will switch between both ssids if defined but keep the original IP address when it switches to the non-broadcast ssid making it unusable. It shouldn't be switching at all technically. If the non-broadcast ssid is defined only on the iPhone or iPad, the broadcast ssid pops up and starts asking for authentication information. I have Cisco looking into this but I'm quite sure this is an Apple bug. Any other device works fine. We are currently using version 4.3.5(8L2) on the iPads and iPhones. I do know that if we broadcast both SSIDS, the issue goes away, but I don't want to do that. Although it doesn't really add any more security, it just isn't advertised, so most people won't see it and avoids a lot of questions. Hopefully there's a simple solution.
Any ideas apple guys?
Also how does one open an actual trouble ticket with apple?

Did you solve this? Settings\Wifi\Askto join networks - OFF

Windows 7 and Non Broadcasting SSID

As a part of our wireless security setup, we routinely uncheck the box to enable the broadcasting of the SSID in question. We are starting the migration to Windows 7 firmwide and have begun to notice a significant delay in the amount of time that Windows 7 is taking to acquire the SSID when it starts up.
Would like to see how others are handling this. Would prefer not to enable broadcasting of the SSID if at all possible. I know it isnt a good security option but I would like to think it makes it a little harder for someone at least of script kiddy status to get onto the wireless. We are using WPA2 enterprise which required an AD account to get onto wireless so I have a little more in place than just a static passphrase.

Here is the reponse I received from Toshiba Support on this problem -
We are in the process of certifying this driver. As far as the Intel drivers go we do not change and aspect other then the packaging to support from a Toshiba prospective is not really a issue. This problem has been documented from a couple of different manufacturers and we do plan on releasing once it goes through our certification process.
I can tell you that the cert process was slowed down last week due to a issue with a Microsoft KB2393802 that appears to be interacting with the Intel Graphic driver and causing blue screens. Microsoft has since pulled this KB and will re-release but the number of reports has got engineering tied up in the short term. We were planning and having this driver released are the 1st of this month but now certification has been pushed back to the 15th.
Continuing to work with the other Toshiba laptops that we use to confirm the problem/solution on them as well.
Ron

Is my iPhone 4 greyed out wifi and non working bluetooth software or hardware... seems that the forums are full of this issue with no consistent or official answer. is it all coincidence that so many are having the problem? Please help...

Is my iPhone 4 greyed out wifi and non working bluetooth software or hardware... seems that the forums are full of this issue with no consistent or official answer. is it all coincidence that so many are having the problem? Please help... I have scoured the net trying everything the last few days.

Please correct your porfile: iPhone 4 do not have IOS 6.1.4.
The usual troubleshooting steps are, also remember to test it after every step:
1. Restart
2. Reset
3. Restore from backup
4. Restore as new.
If no joy, make an Appointment with the Apple genius and have them evaluate

I just bought an new ipad mini with wifi and cellular. Is there any way to send text messages to people and contacts that do not have iphones such as friends with blackberrys or a samsung galaxy smartphone.

I just bought an new ipad mini with wifi and cellular. Is there any way to send text messages to people and contacts that do not have iphones such as friends with blackberrys or a samsung galaxy smartphone from this ipad. Everytime I try to send a message to a person that does not have an Apple product ( Iphone or Ipad ) it comes up saying contact is not registered for iMessage and wont send it. I can only send them a message from my iPhone 4 instead. Do I have to install a new App from the App store to send these non iMessage cell users a message?

FYI
Complete guide to using iOS 6
http://howto.cnet.com/ios-6-complete-guide/
Guide to Built-In Apps on iOS
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
http://www.youtube.com/watch?v=YT2bD0-OqBM
http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
 Cheers, Tom

I've been having trouble with in getting iMessage to send messages. I decided to connect to my VPN (along with wifi) and it worked. Why won't it work via my wifi connection alone?

I've been having trouble with in getting iMessage to send messages. I decided to connect to my VPN (along with wifi) and it worked. Why won't it work via my wifi connection alone?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

I have an ipad2 with wifi and 3G. My wife and I are traveling in France (Nice) then into Italy. We are unable to purchase a data plan because our Verizon IPad will not accept a sims chip...we are told. We were advised that this model wound work in Euro

I have an ipad2 with wifi and 3G. My wife and I are traveling in France (Nice) then into Italy. We are unable to purchase a data plan because our Verizon IPad will not accept a sim chip...we are told. An Apple store employee here said this model is good only in the US. The iPads here take a sim card. We were advised by an Apple Store Employee at home that this model would work in Europe and that we could buy our service here. That does not seem to be the case. We have been told that we must invest in a modem at 200.00€ and then purchase a separate service plan for each country. We can use the free wifi wherever it is available but we cannot connect to the outside world when out of range. Is there anything else we can do?
Thanks, John

Unfortunately, no other solution is available.
Hope this helps

Estimated delivery dates for iPad 4 with wifi and cellular UK

I have ordered the new iPad 32gb With wifi and cellular data and on my account it just says late November. Is there any way to find out a more specific date as I am going away and want to take it with me?? Would I have to ring Apple and ask?

No one here will know
I doubt ringing will change anything as Apple
will update orders as soon as they can see supply to apply to the orders
You will find the number for UK on the order document

Internal table with Dynamic and Non dynamic fileds

Hi Experts,
How to get the internal table with Dynamic and Non-Dynamic Fields.
Could u please help me.
Thanks,
Varun

Hi,
Execute the below sample code or analyze it there is appropriate description provided.
*& Report ZTEST_PRM_DYN_ALV
REPORT ZTEST_PRM_DYN_ALV.
type-pools: slis.
field-symbols: <dyn_table> type standard table,
<dyn_wa>.
data: alv_fldcat type slis_t_fieldcat_alv,
it_fldcat type lvc_t_fcat.
selection-screen begin of block b1 with frame title text-001.
parameters: p_flds(5) type c.
selection-screen end of block b1.
start-of-selection.
*build the dynamic internal table
perform build_dyn_itab.
*write 5 records to the alv grid
do 5 times.
perform build_report.
enddo.
*call the alv grid.
perform call_alv.
*Build_dyn_itab
form build_dyn_itab.
data: new_table type ref to data,
new_line type ref to data,
wa_it_fldcat type lvc_s_fcat.
*Create fields .
clear wa_it_fldcat.
wa_it_fldcat-fieldname = 'name1'.
wa_it_fldcat-datatype = 'mara-matnr'.
wa_it_fldcat-intlen = 5.
append wa_it_fldcat to it_fldcat .
*clear wa_it_fldcat.
wa_it_fldcat-fieldname = sy-index.
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 5.
append wa_it_fldcat to it_fldcat .
do p_flds times.
clear wa_it_fldcat.
wa_it_fldcat-fieldname = sy-index.
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 6.
append wa_it_fldcat to it_fldcat .
enddo.
*Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
exporting
it_fieldcatalog = it_fldcat
importing
ep_table = new_table.
assign new_table->* to <dyn_table>.
*Create dynamic work area and assign to FS
create data new_line like line of <dyn_table>.
assign new_line->* to <dyn_wa>.
endform.
*Form build_report
form build_report.
data: fieldname(20) type c.
data: fieldvalue(5) type c.
data: index(3) type c.
field-symbols: <fs1>.
do p_flds times.
index = sy-index.
*Set up fieldvalue
concatenate 'FLD' index into
fieldvalue.
condense fieldvalue no-gaps.
assign component index of structure <dyn_wa> to <fs1>.
<fs1> = fieldvalue.
enddo.
*Append to the dynamic internal table
append <dyn_wa> to <dyn_table>.
endform.
*CALL_ALV
form call_alv.
data: wa_cat like line of alv_fldcat.
*clear wa_cat.
wa_cat-fieldname = 'matnr'.
wa_cat-seltext_s = sy-index.
wa_cat-outputlen = '10'.
append wa_cat to alv_fldcat.
do p_flds times.
clear wa_cat.
wa_cat-fieldname = sy-index.
wa_cat-seltext_s = sy-index.
wa_cat-outputlen = '6'.
append wa_cat to alv_fldcat.
enddo.
*Call ABAP List Viewer (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
it_fieldcat = alv_fldcat
tables
t_outtab = <dyn_table>.
endform.
Hope this will help, reward if found usefull.
Cheers,
Ram.

Can I get an Ipad with wifi and cellular but no contract with a carrier in the US? I want to use it overseas in Africa with a local SIM card and use the cellular signal for all my internet.

Can I get an Ipad with wifi and cellular but no contract with a carrier in the US? I want to use it overseas in Africa with a local SIM card and use the cellular signal for all my internet.

Yes you can. All Ipad's are unlocked and can be used any where in the world. Buy the AT&T version which is GSM in other countries

What type of database operations effectd with Unicode and non unic

Hi Friends,
I want to know what type of database operations effects with Unicode and non Unicode Programing .
Thanks,
Ravi Kumar Mukkera

Hi ,
Check these links .
http://help.sap.com/saphelp_nw04/helpdata/en/62/3f2cadb35311d5993800508b6b8b11/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtoot/docs/library/uuid/ff99cb90-0201-0010-e389

Dear Friends...... I have an ipad 2 32gb with wifi and 3g enabled sim..... i bought it second hand .... and now if am going to download any games it is showing me an email id and asking for its password... please guide me how can i change this setting

Dear Friends...... I have an ipad 2 32gb with wifi and 3g enabled sim..... i bought it second hand .... and now if am going to download any games it is showing me an email id and asking for its password... please guide me how can i change this setting to my email id and password

Tap on the id in Settings > Store and log out of it and then login with your id. Any content already on the iPad will be tied to the previous owner's id and it can't be copied or transferred to your id - so it's probably best to do restore the iPad back to factory defaults and start as from new with it : Settings > General > Reset > Erase All Contents And Settings

Hello community I have a big problem with my iphone 4s as precent problem with wifi and ios7. my phone was a champ when actualize this, eh degrade searched everything but I can not because I get the error 3194. I want a solution please

Hello community I have a big problem with my iphone 4s as precent problem with wifi and ios7. my phone was a champ when actualize this, eh degrade searched everything but I can not because I get the error 3194. I want a solution please

This support document http://support.apple.com/kb/ts4451 relates to the 3194 error. Generally this error has to do with trying to install an iOS that is not the most current. Maybe you tried to jailbreak the phone, or downgrade iOS? Any of this apply to you?

I am facing problem with wifi and cellular after update Apple iOS 8.0.2

How can we resolve the issue with wifi and cellular reception after update the iOS 8.2 on iPhone 5s 32 GB

Try some basic troubleshooting:
(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
(C) Setup as new (data will be lost if you do not have backup)
Settings>General>Reset>Erase all content and settings

Problem With WIFI and Bluetooth

HI Im Vikram
Recently i upgraded to IOS 8.1 so problem started with WIFI and Bluetooth . When i was in IOS 7.1.2 everything was fine with my device. so what should i do now ?? Is there any possibility to downgrade to IOS 7.1.2 ??

Hi Rainxl,
Unfortunately the BIOS is unable to be resorted to back it up, as the issue persists. I suggest contacting our Technical Support Team for all the information required and to get the details of the nearest Authorized Service Center to get the issue analyzed.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

3.12 Bug with WiFi and non broadcast SSID?

Similar Messages

Maybe you are looking for