3.3EA1 Issues with report generator interfaces

Trying to build out a few reports in the EA version and noticing a few issues:
1. When you first launch the report wizard the template drop down and manage button are greyed out. If you click another option from the available reports tab then they become active.
2. If I pick a Template, then select a Report Configuration, the Template gets blanked out and disappears from the drop down list. So I can't use a report configuration (having selected a few sub views or specific tables) and a custom template? I have to exit the report builder and re-enter to get the Template drop down to re-appear.
Thanks.

Hi Kent,
We saw this bug and it's already fixed.
Thanks.

Similar Messages

Issue with Report Layout

Hi All,
I am working on a report which display employee present or absent in the month. I have to display dynamic column as days varies as per month .
I am done with the report design/query part, using matrix report layout. Report executes and produce expected output too.
Problem:
As this report consists maximum 33 columns (1 = employ name + 31=days in the month + 1=Total days present) I change Page Layout to Landscape.
When I select report output as "pdf" it generates report in Portrait Layout.
Could you please tell me how to fix this issue?
regards,
RSD

Title of this Forum: Forms
Title of this Thread: Issue with Report Layout
I can't point my finger on it, but something feels wrong. Or is it just me ;) ?
Reports has its own forum dedicated to questions related to...reports:
Reports
You have a good chance that you get more answers over there. Also you did not mention any version numbers (reports version, database version,...) so please add these informations over there as well as the solution to your problem may depend on the version of the product you are using.
good luck!
cheers

Issue with report RBDMIDOC

Hi Gurus,
I have an issue with the report RBDMIDOC. When I run it to the message type MATMAS, it takes 8 or 9 seconds to send the IDoc. With the message type CLFMAS takes 3 seconds.
The duration of the execution of this report depends only of the access to the BDCP and BDCPS tables or is there any other factor that has influence on this time?
The BDCPS table has 300000 entries, and is well indexed.
What could I do to reduce this time?
Thanks and regards,
Manuel Míguez.

[Duplicate Post|Issue with Report RBDMIDOC;

Issue with report Y_DEV_82000038 P & L by period plan.

Hi,
It seems we are having an issue with report Y_DEV_82000038. When we are executing this report then in the output for one line item it is showing one value and when we drill down it it is shoiwng double value of what it is showing in the initial screen of output.
Regards

Hi,
The reports with 'Y' or 'Z' are not standard ones. You have to check with the person who developed this report. Ask to your ABAP team to help you.
Regards,
Eli

Issue With Report Builder After Installing SP3 for SQL 2008 R2

Hello. We are experiencing an issue with Report Builder 3.0 since installing SP3 for SQL 2008 R2 over the weekend. You can no longer launch Report Builder from the Reporting Services URL (http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application
      Server  : Microsoft-HTTPAPI/2.0
      X-AspNet-Version: 2.0.50727
Application url   :
http://dicomweb/ReportServer/ReportBuilder/RptBuilder_3/MSReportBuilder.exe.manifest
      Server  : Microsoft-HTTPAPI/2.0
      X-AspNet-Version: 2.0.50727
IDENTITIES
Deployment Identity  : ReportBuilder_3_0_0_0.application, Version=10.50.6000.34, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86
Application Identity  : MSReportBuilder.exe, Version=10.50.6000.34, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86, type=win32
APPLICATION SUMMARY
* Online only application.
* Trust url parameter is set.
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of
http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application resulted in exception. Following failure messages were detected:
  + File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
* [10/15/2014 9:35:56 AM] : Activation of
http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application has started.
* [10/15/2014 9:36:29 AM] : Processing of deployment manifest has successfully completed.
* [10/15/2014 9:36:29 AM] : Installation of the application has started.
* [10/15/2014 9:36:31 AM] : Processing of application manifest has successfully completed.
* [10/15/2014 9:36:35 AM] : Found compatible runtime version 2.0.50727.
* [10/15/2014 9:36:35 AM] : Detecting dependent assembly Sentinel.v3.5Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=msil using Sentinel.v3.5Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a,
processorArchitecture=msil.
* [10/15/2014 9:36:35 AM] : Detecting dependent assembly System.Data.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=msil using System.Data.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089,
processorArchitecture=msil.
* [10/15/2014 9:36:35 AM] : Request of trust and detection of platform is complete.
ERROR DETAILS
Following errors were detected during this operation.
* [10/15/2014 9:36:43 AM] System.Deployment.Application.InvalidDeploymentException (HashValidation)
  - File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
  - Source: System.Deployment
  - Stack trace:
   at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, Hash hash)
   at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, HashCollection hashCollection)
   at System.Deployment.Application.ComponentVerifier.VerifyComponents()
   at System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification
notification, DownloadOptions options)
   at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
   at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
   at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
   at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
COMPONENT STORE TRANSACTION DETAILS
No transaction information is available.

Hi DMcGarveyt,
This is an known issue in SSRS 2008 R2 SP3. For this issue, Microsoft has published an article addressing this issue. It is not planning to release a fix for this defect. But there's workarounds for this issue. Please refer to the link below:
Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Issue with Report Links in OBIEE

I'm facing a issue with report links(modify,printer friendly,refresh etc) in obiee
The reports which are set as "Display Results-->Embedded in Section" for those reports if I put report links(modify,printer friendly,refresh etc),the links do not show up.In the palce of link I can see "-"(minus sign) appearing.
If I change the report to "Display Results--->Show as link in seperate window" the lniks show up fine.
Any idea why this is happening?
Your suggestions are welcome.
Please help
Regards.
Edited by: 810008 on Apr 14, 2011 1:39 AM

Edit Dashboard -> Report Properties -> Report Links... (directly under Display Results) -> Customize
M.

Issue with reporting interface - CO EP reports

Hello -
We have set up a CO report using report painter (GRR1). We are having an issue with this report when it drills down to KSB1 transaction to display the CO lines. I have checked the OSS notes related to this issue and one of them matches with the issue I am encountering.
Note 311364 - BBS: brnch to CO EP reprts w/ charactrstc RESP_FLAG - When you branch from Report Painter/Report Writer reports which use the characteristic 'Object type', these selections are not taken into account by the CO line item reports. The error occurs if the characteristic RESP_FLAG is used in the report called up.
We are currently on ECC 6.0 and this note is only applicable to versions 45A and 45B. When I check the program in my ECC 6.0 system, the corrections mentioned in the note are NOT being applied. Is there a way to fix my issue by reapplying the note ?
Regards,
J

Hi John,
as you've already identified the issue your basis team has 2 ways to solve the case:
1: deimplement the note and implement the last version again
2: (if the code is still missing), enter it manually.
Maybe you should raise a SAPNET message as this case is not normal...
Apart from that: if the note is not implemented properly why can't you tell the basis-team this case and they have to look for a solution?
Best regards, Christian

Font Issue with Report Generation Toolkit for Microsoft Office

I have been using this toolkit for only a few days now, but I just have to get this issue off my back. When developing a toolkit it would be a good idea to use the same cluster to represent fonts in ALL places. If you look at "Excel Set Graph Font" vs. "Excel Easy Table" they take two completely different clusters. Why? I don't know, but it is *very* annoying.
How could something like this slip through the cracks? Is there some reason why there is this discrepancy? From my perspective as a software engineer I see no excuse, but maybe someone else can justify this oversight for me. I just hope that I don't find any more issues with the toolkit...
Naveen.

Naveen,
what you said is true when dealing with same kind of objects, but in this circumstance, different cluster defines the font of a differnt object. For example, you may not want the user have as many options with defining the font for the X Y axis title as that for defining the text in the table. This is ture when you want your generated report to have similiar styles.
But this is certainly something we will think about, thanks for your constructive suggestion,
XD Gao
Application Engineer
National Instruments

Issue with Reports using costume measures - BPC 10.0 NW

Hello BPC Colleagues,
I’m having a problem with some BPC reports using costume measures and I would like to have your inputs about this issue.
When all the reports are executed using a costume measures the report execution fails after a long time of execution (7min). The report has 1200 accounts and 57 company codes.
In order to create trial balance we create these costume measure. Basically the measures are standars (with a few changes) and it works for limited reports (few account and companies) but we I try to executed for several accounts and companies I have the following error:
“The execution of report Default Report failed. Please contact your administrator.”
Error while communicating with the server
Framework message:
The underlying connection was close: An unexpected error occurred on a receive.
Summary of the BPC LOG:
|An error occurred while receiving the HTTP response to https://BPCENV.APPSET.MODEL. This could be due to the service endpoint binding not using the HTTP protocol. This could also be due to an HTTP request context being aborted by the server (possibly due to the service shutting down). See server logs for more details.#
We already increased the PSAPTEMP table and this didn’t fix the issue. At the beginning we were sure that this was an issue with table space but the error persist.
I don’t think (maybe I’m wrong) that this is not an issue related to the costume measure or to authorizations since I can retrieve data if I reduce the request to less accounts an company, so in my point of view this looks like a performance issue.
Just for you, below you will find the details about our measure that generate the problem:
'IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="INC",SUM(PERIODSTODATE([%TIME%].[%TIMEYEARLEVEL%], [%TIME%].CURRENTMEMBER), [MEASURES].[/CPMB/SDATA]),
IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="EXP",SUM(PERIODSTODATE([%TIME%].[%TIMEYEARLEVEL%],[%TIME%].CURRENTMEMBER),[MEASURES].[/CPMB/SDATA]),
IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="AST",([MEASURES].[/CPMB/SDATA],CLOSINGPERIOD([%TIME%].[%TIMEBASELEVEL%])),
IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="LEQ",([MEASURES].[/CPMB/SDATA], CLOSINGPERIOD([%TIME%].[%TIMEBASELEVEL%])),[MEASURES].[/CPMB/SDATA]))))';SOLVE_ORDER=3
Finally is important to mention that we are using BPC 10.0 NW (SP08)
If you have any suggestion for me I will appreciate.
Thanks you a lot!

Hi Vadim,
Once again, thanks for your help.
We already modified the YTD standard measure but is with that measure that I have problem. Do you think that my new formula is not efficient and for that reason I’m having this problem? Is this correct?.
Below you will find the standard and costume measure. In red I marked the difference between these 2 formulas:
YEAR TO DATE CUSTOME MESURE:
'IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="INC",SUM(PERIODSTODATE([%TIME%].[%TIMEYEARLEVEL%], [%TIME%].CURRENTMEMBER), [MEASURES].[/CPMB/SDATA]),
IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="EXP",SUM(PERIODSTODATE([%TIME%].[%TIMEYEARLEVEL%],[%TIME%].CURRENTMEMBER),[MEASURES].[/CPMB/SDATA]),
IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="AST",([MEASURES].[/CPMB/SDATA],CLOSINGPERIOD([%TIME%].[%TIMEBASELEVEL%])),
IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="LEQ",([MEASURES].[/CPMB/SDATA], CLOSINGPERIOD([%TIME%].[%TIMEBASELEVEL%])),[MEASURES].[/CPMB/SDATA]))))';SOLVE_ORDER=3
YEAR TO DATE STANDAR MEASURE:
'IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="INC",SUM(PERIODSTODATE([%TIME%].[%TIMEYEARLEVEL%], [%TIME%].CURRENTMEMBER),-[MEASURES].[/CPMB/SDATA]),
IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="EXP",SUM(PERIODSTODATE([%TIME%].[%TIMEYEARLEVEL%],[%TIME%].CURRENTMEMBER),[MEASURES].[/CPMB/SDATA]),
IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="AST",([MEASURES].[/CPMB/SDATA], CLOSINGPERIOD([%TIME%].[%TIMEBASELEVEL%])),
IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="LEQ",-([MEASURES].[/CPMB/SDATA], CLOSINGPERIOD([%TIME%].[%TIMEBASELEVEL%])),-[MEASURES].[/CPMB/SDATA]))))';SOLVE_ORDER=3
If you have any suggestion to correct my formula I would really appreciate it.
Regards,

XML-OPP issue with report

We have following issue while running/generating XML report.
"The output post-processor will be made to post-process this request.
No further attempts will be made to post-process this request, and the request will me marked with warning status.
Setting the profile option concurrent: OPP Response Timeout to a higher value may be necessary. "
We are also getting following errors as well.
"XML File does not appear have any style information associated with it."
We have increased OPP: Response time and bounced, but still same issue. Could someone please help?
Regards,
Vikram

Please post the details of the application release, database version and OS.
Please check the OPP log file for details about the error.
Please see these docs.
Concurrent Requests Fail Due to Output Post Processing (OPP) Timeout [ID 352518.1]
Troubleshooting Oracle XML Publisher For The Oracle E-Business Suite [ID 364547.1]
Report Output Error: The XML page cannot be displayed. Cannot view XML input using style sheet. [ID 753620.1]
R11i/R12 Potential Workaround For Publishing XML Reports When The OPP (Output Post-Processor) Fails [ID 858132.1]
EBS - Technology Area - Webcast Recording 'E-Business Suite - Concurrent Manager Performance - Best Practices' [video] [ID 1367676.1]
R12: Troubleshooting Known XML Publisher and E-Business Suite (EBS) Integration Issues [ID 1410160.1]
Thanks,
Hussein

Issue With Report Viewer Version 11 On VS2012 & VS2013

I create a sample project on VS 2012 @ VS2013 and created a report with some static data . I am trying to print the Report generated through report viewer 2012, but it is throwing the following
"error An error occurred during printing. (0x80070006)".
I am trying to test this on Windows 8.0 and Windows 7. It is working perfectly fine on Windows 8 . The issue is only on windows 7.
Checked “Downloaded Program Files” folder. All the required files were existed.
Enabled Active X.
Please suggest me how i can resolve this issue in Windows7 ?.

Hi Arc Sam,
Please find the details information below:
You can install the control using the RSClientPrint.cab file... You can find this file in your VS installation at "\Microsoft Visual Studio 9.0\ReportViewer\". Below is a link to a related thread
which may help you:
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=332145&SiteID=1
Similar thread below:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/0501da39-0a27-4f61-81e0-7c6bb2c5a189/reporting-services-report-viewer-activex-control?forum=sqlreportingservices
Regards,
Swallow

Facing an Issue with Payables Open Interface Import

Hi
I am facing an issue with the Payables Open Interface Import...
My Requirement is:
1. Need to upload the PO, Supplier, Invoice #, Invoice Date details to custom table (through web ADi)
2. From custom table storing in the AP invoice interface tables.
3. From Interface table, calling API (Payables Open Interface Import) which wil create the invoive (PO matched)
Now, If user has given wrong data some reasons....Payables Open Interface Import has rejected that entry....user has checked this and corrected later and trying to create the same invoice with the correcte data....As there is a rejected a line exists on the Header interface, line interface...even though if he pass the correct data in the second time it is cosidering that rejected row and not processing the correct row...
Can any one suggest on this...
Regards,
Bala

When processing a record, you can check if another ap_invoice_interface record exists for the same invoice number and
1) Delete the old record and then insert a new one
OR
2) Update the old record instead of creating a new one
Hope this helps,
Sandeep Gandhi

Issue with report (S_ALR_87013611) that is actual/plan line items for Cost

Hi Gurus,
I am having issue with the report (S_ALR_87013611) that is actual/plan line items for Cost Center.
When i execute the report for a cost element 510200 the amount is 23,380.13, but when i drill down on it by double click on that amount the value in obj curr is 15468.91. Hence there is the differnce. When i futher drill down by double click on the amont of 15468.91 and i go to display group currency and take the total it is 23380.13 and display in local / doc currency the amount is 15468.91. I guess due to this there is difference. The cost center & the cost elements are the same i have checket it.
My concerns is that the group curr is USD and obj curr / local curr is USD. So is group curr and doc curr is USD then when i click on dislay curr and select group curr why the amounts are changing.
Kindly adivce

Try to look if there is any filtering criteria applied in the report to which you drill-down.
The difference can be also caused by the "value type" - some reports show actual and statistical costs together in one column while the others strictly show (are defined to show) only e.g. actual costs (type 04) and not the statistical costs (type 11)

Issue with Report

Hi Friends,
Pls find the issue below
There is a issue with the customer report, When i look at the contracts on R3 - transaction code ME3M - material 34007071 , contract 46.38450 advises contract quantity of 250,759. when i run a BW report it advises contract 46.38450 as 759. Diff = 250,000.
Can any one please advice on this ?

First check in RSA3 whether the data source is bringing correct value or not.
If in RSA3 value is correct then you need to check your transformation.
Cheers,
Neel.

Issue with report FAGLL03

Hi
I have an issue with the SAP report FAGLL03. There is a document posted in the system with the posting date in previous year but document date in the current year. I can see this document in the document display and BSEG but when I go to FAGLL03, I cannot find this document. Can someone please help me in figuring out where the problem is?
I appreciate your help.

Hi Everyone
Thanks for helping me to analyze and resolve this issue. I appreciate all the timely help provided by you all. We already had line item display activated in the GL account but in the table SKB1, there was a slash next to the field Clearing specific to GL group and we had to remove that selection programatically. Once we did that, we were able to see the postings corresponding to this accout though no historical data was displayed. We do have this setting for many other accounts. I am not sure why this setting was made in the first place and what would be the impact of removing it.
Any ideas would be helpful.
Thanks,
Shalu
Edited by: Shalu G on Dec 7, 2009 4:07 AM

3.3EA1 Issues with report generator interfaces

Similar Messages

Maybe you are looking for