3&4 finger functions not working

I have a late 2009 MBP and just recently my 3 and 4 finger functions have stopped working on my trackpad. I checked system prefs and they are all checked, so I don't know what is going on. Any ideas on how to fix this?

Similar Messages

Trackpad two- and three-finger functions not working

Everything was fine last night, but when I turned on the computer this morning, the trackpad is not working correctly. Cursor movement with one finger feels different than normal (a bit sluggish) and two- and three-finger functions such as scrolling, enlarging, and navigating forward and back do not work. I have tried letting the computer sleep first, rebooting, shutting down and turning back on, and the trackpad firmware update from last November (which it said I did not need to update) and nothing has worked. The trackpad menu in the System Preferences offered nothing as well. I have not updated to Snow Leopard.
Thanks in advance for your help.

Hi
I had the same problem specially after carrying out the last update 4.3 the battery was draining very fast y. In addition to that the phone freezing initially for few minutes then for almost a day and finally continuously.
I did almost every thing but replacing the handset and non worked.
As a final attempt to fix the problem before I replace the unit and get a new one was to
1. connect the phone to the my computer (Mac)
2. Launch iTunes
3. Restore the phone to factory setting (with the 4.3) upgrade.
Of course I lost every thing my contacts all of my apps and phone settings. But it worked it has been two days now the phone didn't freeze and the battery life is even better than before.
Note:
1. All of my contacts, note, calendar, emails were backed up using my company exchanger
2. Before restoring I listed all of the apps that were installed and I reinstalled them one by one all over again.
Try this solution and I hope it works with you.
Regards
Ana Al Khanajri
iPhone 4 iOS 4

Not able to sign into Blackberry Protect. Backup and Restore function not working. "Your device isn't associated with a Blackberry ID"

Not able to sign into Blackberry Protect. Backup and Restore function not working. Message is: "Your device isn't associated with a Blackberry ID." My Blackberry Messenger and Blackberry World is working fine so I am sure its not an ID issue on the phone. I can sign into Link, Blackberry.com and Protect. I see my device in Protect but cannot send messages or view it on a map. Times out with cannot reach device message. BB Protect on Device has a swirling circle beside the on/of switch. Cannot turn off.
I have deleted Link and re-installed.
I have reset phone to default(factory) and signed in.
OS level is 10.2.1.3062
BB Link is 1.2.3.56
Solved!
Go to Solution.

I managed to figure this out myself. I had to delete the device from the Blackberry Protect website. protect.blackberry.com. I wiped my device again and signed in with my Blackberry ID. I dont know if the step of wiping was necessary as I did not try my backup with the current configuration on the device following the delete. Restore is in progress for me!

Copy/paste function not working in Firefox 22. Always good in previous versions

Copy/paste function not working in Firefox 22. Always good in previous versions editions

Well I've uninstalled FF22, thanks for the suggestion.
Chrome works perfectly with ZA and C&P.

Why is the scroll function not working after accessing the voice feature in settings?

Why is the scroll function not working after accessing the voice feature in settings?

For some prerecorded audio files the Transpose slider will not work reliably. I found no clear pattern, when it does and when not.
If all fails, create a loop from the audio file. Select the region in the track and use the command "File: Add region to Loop library".
Set the current key and tempo, name the loop, and save the loop.
Now add it from the loop browser to a new track and delete your old track. The search field in the Loop browser will help you to find the loop quickly.
You will be able to transpose the sample as described above, like a regular loop.
For example - a audio file turned into a loop and transposed:

MDX -Children count function Not working in Case statement

Hi,
I am trying to create set when you slice with the Hierarchy member is leaf level , I want a output only that Leaf level .
and When I slice with the parent level , it has to give all the members below that parent level.
But the problem here is when I select child member or leaf member , The first condition in the Case is not working
WITH SET
TESTSET AS
CASE
WHEN
[Dimension].[Hierarchy].currentmember.children.count<0
THEN
[Dimension].[Hierarchy].currentmember
ELSE
DESCENDANTS([Dimension].[Hierarchy].Currentmember,,AFTER)
END
SELECT
WBSSET ON 1,
{} on 0
FROM
(SELECT {[Dimension].[Hierarchy].&[10]} ON COLUMNS FROM [CubeName])
Thanks,
Santosh

Hi Santosh,
I don't think Children count function not working in case statement, I have tested it on my local environment, here s the sample query for you reference.
with member
testset as
case
when
[Geography].[Geography].currentmember.children.count<10
then "X"
else "OK"
end
select testset on 0,
{[Geography].[Geography].[Country].members} on 1
from
[Adventure Works]
In your scenario, the issue might be caused by the query isself, you can try to use IsLeaf Funcion to achieve your requirement. Please refer to the links below.
http://msdn.microsoft.com/en-us/library/ms144932.aspx
http://www.databasejournal.com/features/mssql/article.php/3633696/MDX-Operators-The-IsLeaf-Operator--Conditional-Logic-within--Calculations.htm
http://www.mdxpert.com/Functions/MDXFunction.aspx?f=22
Regards,
Charlie Liao
TechNet Community Support

Palm Desktop 6.2.2. and Lookup function not working in Windows 7

Palm Desktop's lookup function not working in Windows 7 64bit. Please help.
Post relates to: Centro (Verizon)
This question was solved.
View Solution.

I was able to solve this by unchecking compatibility mode and setting the application to run as administrative.

Send & Recieve functionality not working with WebDav after installing Acrobat XI

Send & Recieve functionality not working with WebDav after installing Acrobat XI for PDF. Acrobat XI is complete installations(Trial Version).

Hi Kiro ,
Did you try opening that file in any other browser ?If not ,please try doing that once and see if that works for you.
Try Repairing Acrobat once and see if that helps.
Launch Acrobat>Navigate to Help>Repair Acrobat Installation.
Regards
Sukrit Dhingra

Windows 8.1 pro 64 bit - finger print not working (sony viao 15126pab)

http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/windows-81-pro-64-bit-finger-print-not-working/664d9ca8-a0ea-479f-851d-3631e3c1404c hi i am using sony svs 15126pab  2 days before firefox hanged so i forcefully shutdown the system , after rebooting fingerprint not workingthen i go to device manager i found biometrics working properly , 2, 3 times restarted then also finger print not working, then i checked the authentic true suite " its giving error message box and closing every times then i uninstall authentic true suite and installed again ,it asked registration and i registered but i didn't see the finger enrolling options in the software . i enabled biometrics options in administrative templates (components) , other options also enabled in services restarted , reinstalled from Sony Store - nothing helps..................... please help me ,,, i cant enable the add option of fingerprint in sign in options in settings.. the add option is like deactivated , no biometrics tool in control panel, no fingerprint enrolling option in authentic true suite . i purchased the system with windows 8 pro then upgraded to 8.1 now its reserved to windows 10 . so pls give me some solutions to rectify this problem

I cant access any printers, not even the virtual printers.
What I would do is use ProcMon to find out why that Event entry was written. Then I imagine I would get a clue about a .dll which might be involved, which hopefully might be registerable. Since IE9 there have been new .dll involving printing
which have not been reflected in any of our repair tools. However, instead of modifying our old scripts to reflect this fact, I have been advocating, so far unsuccessfully, that Microsoft create a proper IE Repair tool, one which does not rely on such
unreliable techniques.   E.g. a better method of repairing would be to have it done by a proper troubleshooter (an .msdt file) but so far it seems nothing has been done in that way for these symptoms (again, assuming the cause is registry corruption
and not simple interference from now incompatible third-party programming--the fix for that would be to identify and remove the incompatibilities.)   For example.
Robert Aldwinckle

Keyboard + mouse functions not working

After updating InDesign CC 6-days ago started to have issue with all keyboard + mouse functions not working ex. shift key does not constrain proportions when scaling. A restart fixed the issue thr first time. Today I have installed latest update and shut down and restarted several times does not fix issue. On a MacBook pro running OS X Mavericks 10.9.2.

Disconnected extrenal devices ie keyboard and Wacom Bamboo tablet and restarted computer seemed to correct the issue.

In my ipad zoom function not working..some day before it worked,but when i double pinch with my three fingers it zooms negligible, wat to do?plzz help me..

In my ipad zoom function not working..some day before it worked,but when i double pinch with my three fingers it zooms negligible, wat to do?plzz help me..

It works when I reset my all settings...
Settings>general>reset>reset all settings
It never delete ur all contacts and any others,but ur wallpaper and wifi connection will change..it can be as before...

HT204168 touch screen function not working when using facetime

Why is my iPad touch screen function not working when using FaceTime?

Hi megascones,
I apologize, I'm a bit unclear on the exact nature or scope of the issue you are describing. If you are having issues with the touch screen on your iPad, you may find the troubleshooting steps outlined in the following article helpful:
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
Regards,
- Brenden

Why is my touch screen function not working when using facetime

Why is my touch screen function not working when using facetime

Hello megascones,
After reviewing your post, it sounds like the screen is not responding to touch in one app. I would recommend that you read this article, it may be able to help the issue.
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
Restart your device. If you can't restart, reset your device.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Finger sensor not working and some time iphone 6 screen also hang/pause for few seconds

In my iphone6 finger sensor not working and some time iphone 6 screen also hang/pause for few seconds.

Try cleaning the sensor, remove all fingerprints from the settings, and the start over in recognizing prints. There are a number of things that make prints hard to read, sweat, lotion, dirty hands, etc.

Multi finger gesture not working

Hi,
My laptop is hp 15-r014TX.
Recently my touchpad multi finger gesture has stopped working. I can not scroll using 2-finger scroll, right click, rotation, zoom in and out. However, one-finger gestures are all working fine like I can swap between apps by left swipe, options appear by right swipe. I tried changing the settings, but of no use.
Thanks,
Pragya

Hello @Pragya_Mathur ,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP 15-r014tx Notebook and the finger gestures not working correctly. Here is a document on how to troubleshoot the finger gestures on a Touchpad.
If you will go to the section on common TouchPad gestures, TouchPad and ClickPad configuration options are located on the TouchPad properties page. It shows you the Clickpad properties page. You can select the options. This only works on programs that have this capability, such as a photo browser or word processor.
Hope this fixes your issue with finger gestures.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

3&4 finger functions not working

Similar Messages

Maybe you are looking for