3-4 seconds added on audio wavs when burning cd's

i like to put very brief audio wav clips on my cd's and when i burn one of 2 seconds it comes out as six on the finished cd. does anyone know why 3-4 seconds would be added on to the finished product?

I think I'm in love...
I just spent the past 3 hours running through reinstalls of iTunes, looking at every support topic and finally found this wonderful, wonderful thread.
I am having the same exact problem with mixed playlist burns.
I also have great success with waiting for only about 1-2 minutes while iTunes shows "Not Responding". Then it fires right up and burns perfectly.
Thank you for posting this quazi solution, and it has helped me tremendously. Well, at least it has saved me from having to transfer all of my music to a new digital music manager.
I hope this issue gets resolved soon
Windows XP

Similar Messages

Hey ppl,my macbook is not booting and by that i mean u can hear the audio wave when its starting up,the screen goes white and then after a while there's a folder with a question mark in the middle of the screen...anyone,any ideea?!?

Hey ppl,my macbook is not booting and by that i mean u can hear the audio wave when its starting up,the screen goes white and then after a while there's a folder with a question mark in the middle of the screen...anyone,any ideea?!?Regards.

That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the hard drive data is somehow corrupted.
Put your install DVD into the drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the optical drive.
Once it has finished booting and you are at the Install screen launch Disk Utility from the Utilities menu. Is your Hard Drive in the list on the left?
If it is then select the First Aid Tab run Repair Disk and if that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

Audio disappears when burning in iDVD 6 from QT movie (from FCP)

Before burning, checked all the chapters and each plays with audio. When the disc burns it does encode the audio during the burning process but the only audio that is present when the burn if completed is the audio on the 1st menu. I only inserted video on menus two and three (using "Full Frame" menu) as I only want video; no audio on those two menus . I had to force quit twice and then ran Repair Permissions. Should have I trashed iDVD prefs and if so, is there only one to trash?
thanks for any help . . .this forum is invaluable.

I had to force quit twice and then ran Repair Permissions. Should have I trashed iDVD prefs and if so, is there only one to trash?
drag and drop all incidents of the iDVD plist to the trash. Use the finder or spotlight to locate all incidents of plist for iDVD. Looks like this:
com.apple.iDVD.plist
secondly, you will need to repair permissions on the HD.
applications > utilities > apple's DU
third, delete all encoded assets from the advanced menu.
forth, recommend using different media like Verbatim DVD-R Minus media and burn from a disc image using apple's DU or Toast at 4x or slower.
fifth .....be very patient while it encodes and burns. i've seen some dvd's take up to 2 days.
sixth ....make certain you have no less than 20GB of available HD space.
Good luck!
SDMacuser

Audio problem when burning DVD

Hi, Hope that someone can help me, I have already make several DVD's,and those went fine, but the latest Imovie project is with spoken audio.
When I try to burn this with IDVD 5.0.1 everything went well till IDVD has come to the audio part, hereby it goes wrong. I didn't get a failure message but nothing happened further on.
Hope someone has a solution!
G5 Mac OS X (10.4.3) 2x1.8 ghz

Hello, prutgers,
You will need to be a bit more specific with your problem so we can help you.
What do you mean by 'it goes wrong'? What exactly happens?
You need to know that when your DVD is encoding audio, the process appears to be doing nothing. If you leave it alone for a while, it just may finish. Maybe you are not waiting long enough.
Especially if you don't get an error message. What are you doing? Did you force quit? Did the DVD burn and has an audio problem?
Give us more information!

Audio Problems when burning

I have tried making disc image, burning disc and the audio will pause for second several times in the play back. It does not do it when playing back in iDVD.
The slide show was started in iPhoto and sent to iDVD. I have started over several times and still same issue. Makes a bad impression and is really not useable for presentation.
I have 30 gigs free space, changed settings to Professional encoding and still same issue. I have no open apps, changed all energy settings and screen saver to never.
Any ideas, I am fresh out, never had this problem with previous version.
Frustrated

Andy,
This question is really in the wrong place - this is the iDVD '08 forum and not the iDVD 5 forum.
From the description of your problem using Toast, it sounds like you didn't actually export a DV video movie out of iMovie.
Export a DV video movie out of iMovie (it will run 13 GB per hour) and play it back with the QuickTime Player to see if the audio settings you made are really there. If this movie plays OK, you can bring IT into iDVD or Toast for turning it into a DVD.
If the DV video movie you created STILL has audio problems in the QuickTime Player, ask you question about THAT issue in the correct iMovie forum.
F Shippey

IMovie audio problems when burning in Toast 6

Hi,
i've tried to burn an imovie project in idvd 5 but i get 'the error #-1 was reported' like most people have been and i've tried loads of things suggested to fix it with no joy.
I then sent the imovie project to toast titanium 6 where it burned fine. However, when i watched it i noticed that although toast had picked up all the audio (both dv audio and aiff), it did not pick up all the volume adjustments during the movie. how annoying! for example: i have an aiff clip that fades into a movie clip with the sound gradually going down but Toast picks up the sound staying at the same level. this also happens with volume adjustments in a DV file.
Any suggestions why this happens / how i can fix it?
Cheers,
Andy

Andy,
This question is really in the wrong place - this is the iDVD '08 forum and not the iDVD 5 forum.
From the description of your problem using Toast, it sounds like you didn't actually export a DV video movie out of iMovie.
Export a DV video movie out of iMovie (it will run 13 GB per hour) and play it back with the QuickTime Player to see if the audio settings you made are really there. If this movie plays OK, you can bring IT into iDVD or Toast for turning it into a DVD.
If the DV video movie you created STILL has audio problems in the QuickTime Player, ask you question about THAT issue in the correct iMovie forum.
F Shippey

Skipped audio files when burning disc in iDVD.

I burned a DVD using iDVD version 7.0. The audio files sound perfect on the computer but on the disc there are skipped areas noted in three different audio files. I did try different discs and burned discs on both my laptop and my desktop. I have used this program before but never encountered this problem. Any tips? Thanks

Hi
My notes on this.
No audio on DVD disc.
Most common origin.
1. Imported audio from iTunes.
• In iTunes copy out as an Audio-CD .aiff (Same as played on standard Stereo CD - no .mp3)
• Use this in Your movie project
2. Low - Free Space on Start-up/Boot/Internal/Mac OS Hard disk makes it hard for iMovie to work as intended.
Down to 1.3 GB and it doesn’t work - especially audio don’t migrate over to Media Browser
(iM’08 & 09)
3. Material in iMovie’08 & 09 - Shared to Media Browser and here selected as Large
large.m4v. It silenced out this project in iDVD. By making a slight alteration - provoking it to ask for a new Share/Publish to Media Browser and here selecting 640x480 - and audio was back when a new iDVD project was created including this movie.
Minuscular - - 176x144
Mobile - - - - - 480x360
Medium - - - - 640x480
Large - - - - - - 720x540 960x540
HD - - - - - - - - 1280x720
4. Strange audio formats like .mp3, .avi etc.
• Change them to .aiff. Use an audio editor like Audacity (free)
5. Main audio is set to off in System Preferences - Does this by it self - Don’t know why
Cheque Audio-Out resp. Audio-In
6. Ed Hanna
Had the same problem; some Googling around gave me a kludgy, but effective fix
Downgrade Perian from recent versions back to version 1.0.
That worked for me, and so far I haven't encountered any deficiencies — except it takes more advanced versions of Perian to enable QuickTime to handle subtitles in .srt format — that I have noticed.
7. GarageBand fix.
In this set audio to 44.1 kHz (Klaus1 suggestion)
(if this don’t work try 48 kHz - me guessing)
Before burning the DVD.
• Do a DiskImage (File menu and down)
• Double click on the .img file
• Test it with Apple DVD-player
If it’s OK then make Your DVD.
Burn at x1 speed.... (or x4)
• In iDVD 08 - or - 09
• Burn from DiskImage with Apple’s Disk Utilities application
• OR burn with Roxio Toast™ if You got it
Yours Bengt W

HDV imovie projects lose audio sync when burned in idvd

I have 80 min. HDV projects from imovie sent to iDVD, after burning them onto dvd they play fine then lose audio sync after about 60 min. or so.....

Painful in iDvd to do interviews when they happen to fall over the 60 minute mark, isn't it?
If it's of any consolation, it's more reliable in Apple's FCS2 / FCP => DVDSP.
Toast might be another option worth looking at....
Good luck on this.

Lose iMovie audio adjustments when burning to iDVD

Using iMovie 3.1 and trying to make an off camera voice audible by raising the volume control, but when I listen to the finished DVD in player, the off camera voice is so low it's inaudible. It seems that I'm getting a result opposite from the one i want. The off camera voice is recorded on one track only, while the on camera subject's voice is on both tracks.
Again, the adjustments sound fine in iMovie - it's only when I burn it to DVD that the off camera voice virtually disappears.

Hi k
There are several things that can lead to this.
I don't use the share/export to iDVD from within iMovie but
- close iMovie
- locate the project folder and in this the QT.mov file (with Your project "name".mov)
- this I drop into a new iDVD theme window (just inside the edge of it)
- if You by any change drop Your QT.mov file on the desktop and rename
it => result - silent movie.
You may cahnge the name "my phantastic movie" when it is a title in the
iDVD theme window without any problems.
Yours Bengt W

Audio drops when burning to DVD PE9

all aspects of my video and audio look and sound great....until i burn to dvd. then the audio drops so low that i have to turn the volume up to max to hear it slightly and there is a loud humm with it. I've used mpeg and avi files with no problems in the past. help needed

Most likely the software that you're using to create this DVD isn't saving the audio in a standard camcorder mode.
In fact, because there are red lines above the clips on your timeline, it's most likely not saving the video in a standard camcorder AVI either.
Open one of your video clips in a program like G Spot and see what it says about your audio and video specs and codecs. Chances are it will give us clues as to why your audio and video is performing so badly.
http://www.headbands.com/gspot/

Audio lost when burning DVD in preview the sound is there

I have a sound problem with iDVD.
One of the files (MOV) contains photos and sounds. When I preview the DVD in iDVD the sound is good. But when I burn the DVD the sound is gone. I removed the coded files, but the result was the same. The other movie on the DVD is OK.
I have created more dvd's in the same way and it all worked fine.
Any suggesties?

One of the files (MOV) contains photos and sounds.
Where did these sounds come from?

IMovie moving audio clips when transitions are added

iMovie moving audio clips when transitions are addedI have some video clips that need simple fades to black added at the end. However, whenever I add the fade out transition, iMovie does something insane. Instead of the last two seconds of video fading to black and the last two seconds of audio fading out, it seems that a random two seconds of audio from elsewhere in the clip is tacked onto the end and faded. This problem is nuts and I am having no luck finding a solution. Does anyone have one? This has happened with other transitions, but I’d settle for just getting a fade to black to work properly. Is this only a problem with Intel machines?

The problem that you describe has come up frequently on this forum. There are lots of things people have tried, but no solution has been found, other than the workaround of extracting the audio, as Klaus 1 mentions, and manually adjusting the fade out. Some feel that it is an intel machine problem, but that is not clear.
For more information on this issue, try using the search function of this forum, typing in "audio echo with transitions", or some other appropriate search words. You might find of interest the information contained in the following post:
http://discussions.apple.com/message.jspa?messageID=5681815

When converting from a .wav to a .mov is there a loss of audio quality when using QuickTime?

When converting from a .wav to a .mov is there a loss of audio quality when using QuickTime?

When converting from a .wav to a .mov is there a loss of audio quality when using QuickTime?
That would depend on your work flow. MOV is the generic QuickTime file container and is not related to any particular data compression format. If you perform a simple "Save" or "Save As..." action that merely copies the data in the WAV file to an MOV file, then the data remains unchanged and maintains its original quality. If, on the other hand, your transcode/re-compress the original data to a different compression format, then there is always the potential for some loss in quality. Depending on the codec and/or settings, the potential loss could be inaudible to severe.

What is the default setting for amount of seconds between songs when burning an audio cd? I changed mine and my cds are all messed up!

What is the default setting for number of seconds between songs when burning an audio cd? (I changed mine and my cds are messed up!) Thanks!

What is the default setting for number of seconds between songs when burning an audio cd? (I changed mine and my cds are messed up!) Thanks!

Losing audio quality when exporting from premiere pro

I have now had this happen with two different videos. I play the video in premiere pro and the audio is fine. I export the video and lose most of the quality of the audio portion. One project is a music session when exported I only get the main vocal the drums aren't audible only a buzz sound is made where the kick drum would usually come in. On another project is a thank you video for a family member and the audio is distorted after being exported. The audio sounds fine inside of the session. Once exported the audio will still work fine on my computer and my iphone 5s as long as I'm wearing headphones, once I try to play the video through my iphone 5s speakers the audio quality is gone, making the noises as previously stated. My iphone can still play other tracks fine but videos and audio exported from Premiere Pro are distorted. Any advice on how I can export the video so I wont lose audio quality when playing the video on an iphone? I know it's not my iphone speakers, they play other songs just fine.

The source files as far as the audio goes are wav files that I've pulled off of my desktop. My sequence settings are 1920 by 1080 at 29.97 frames per second. The export settings are H.264 with the preset YouTube (HD 1080 29.97 FPS) and I've also tried HD video 1080p 29.97 FPS. If this isn't enough information please let me know I'm in the learning phase. Audio wise the quality is set to high and I'm exporting at 4800 kh and a bit rate of 190. I've also tried a bit rate of 320 and 264 I think it is and still had the same problems. Let me know if I need to do screen shots I really want to figure this out.
Thanks for your help!

3-4 seconds added on audio wavs when burning cd's

Similar Messages

Maybe you are looking for