3.42 - using CTRL+number in MS Word

Hi,
I use MS Word via TTA3.42. Using either the Sun or MS JVMs I can't get
CTRL+1, CTRL+2 to work. Other CTRL sequences such as CTRL+N, CTRL+P,
CTRL+SHIFT+END work OK, but none of the CTRL+number sequences.
For info, in Word, CTRL+2 should change a paragraph or line to
double-spaced (vertical).
Any ideas?
MDS

Hi,
I use MS Word via TTA3.42. Using either the Sun or MS JVMs I can't get
CTRL+1, CTRL+2 to work. Other CTRL sequences such as CTRL+N, CTRL+P,
CTRL+SHIFT+END work OK, but none of the CTRL+number sequences.
For info, in Word, CTRL+2 should change a paragraph or line to
double-spaced (vertical).
Any ideas?
MDS

Similar Messages

  • Switching to another desktop using Ctrl+number

    Hi All,
    I just updated to Yosemite. All seems to work fine but it seems I have lost one of my loving features for switching desktops. I normally have 9 desktops, and I have certain apps assigned to each desktop. To switch between desktops I always use Ctrl+number. But after upgrading this seems that it not longer works.
    Ctrl+ arrow left or arrow right does work. As it does Ctrl. +1. This is the only number that works, then I try Ctrl.+2, +3 and nothing happens.
    Any clue what is going on.
    Thanks.

    The sooner I post the question the sooner I find the answer
    In a nutshell, OSX considers the numbers located in the keyboard above the letters as different keys than the numbers located in the numbers block located in the right side of the keyboard. So when I clicked the ones on the right (which are the ones I usually utilise) the desktop would not move.
    Ctrl+1 was working because I did reset it in the Keyboard -> Shortcuts section. Obviously, you don't realise that you are actually resetting the value, as the same value appears.
    I reset all to be operational when using the numbers block and now it is OK.

  • How do I use domain guessing for single word but search for multiple?

    I would like to configure the search bar to make smart decisions about weather it should fill in an address or search for results. At the very least I would like it to be able to search when multiple words are entered but fill in the address when it's only one word (eg: typing "zelda" would take me to www.zelda.com but "the legend of zelda" would use search)

    The answer that you are probably looking for is what Google calls the '''I'm Feeling Lucky''' Search. Not quite what you describe but if there is one result that stands out as the most common result, you will get taken directly to the page. (Wouldn't work for me, I seldom find what I looking for in the first five hits.)
    This will involve a change to your '''about:config''' configuration variables.
    '''keyword.URL ''' default string
    http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q=
    The '''&gfns=1''' is what gets you the I'm Feeling lucky search.
    References:
    * http://dmcritchie.mvps.org/firefox/search.htm
    * [http://kb.mozillazine.org/About:config About:config - MozillaZine Knowledge Base]
    * [http://kb.mozillazine.org/About:config_entries About:config entries - MozillaZine Knowledge Base]
    <hr>Personally I prevent all (external) searching from the location bar to prevent errors from being redirected to a substitute page (along with additional filtering via the '''Adblock Plus''' extension).
    For '''zelda''', I would type in the word and then use '''Ctrl+Enter''' so that it becomes www.zelda.com (with "Ctrl+Shift+Enter" gets .org, and with "Shift+Enter" gets .net).
    For more information on '''keyboard shortcuts''' and the fact that those two shortcuts above can be [http://www.mvps.org/dmcritchie/firefox/keyboard.htm#newtab switched] see
    * Firefox and other Browser Keyboard Shortcuts (Comparison Table)<br>http://www.mvps.org/dmcritchie/firefox/keyboard.htm
    The '''AwesomeBar''' search is what you get in the location bar drop-down when you enter strings of characters that exist in the Title and/or url address of a previously visited site or one that you have in your bookmarks. You see those choices '''before''' you press "Enter".
    Once you press "Enter" by default you would do a search with your currently selected (default) search engine, as if you had entered the search into the search bar.
    I don't like the last method and would use a ''keyword shortcut'' to use a customized search or to go directly to a web page. But without knowledge of what is available using the Location bar to run an external search works okay for most people.
    <hr>
    The "weather" threw me because for weather you really do want a keyword shortcut, the word you meant was whether.
    More information on [http://dmcritchie.mvps.org/firefox/kws.htm keyword shortcuts].
    * http://dmcritchie.mvps.org/firefox/kws.htm

  • Can't use backspace in ncurses programs without using ctrl

    Heya
    Anyone know how to use the backspace in ncurses programs without the need to press ctrl? If I don't it just gives me "^?", I've tried setting "urxvt*backarrowKey: false/true" but it doesn't help.
    Any help with this annoyance would be appreciated.

    Honken wrote:
    Heya
    Anyone know how to use the backspace in ncurses programs without the need to press ctrl? If I don't it just gives me "^?", I've tried setting "urxvt*backarrowKey: false/true" but it doesn't help.
    Any help with this annoyance would be appreciated.
    Just for the heck of it, try using the number 127 instead of KEY_BACKSPACE or what ever your'e using in your if statement or select statement.  I would have thought it would be the number 08 which is the ascii code for backspace but that didn't work.  Try it and see if it works.  If it does, I'll let you know what steps I took to try and find it. 
      I used the numbers 13 and 27 in my program instead of KEY_RETURN and KEY_ESC, since neither of those worked.  KEY_RETURN required a <shift><return> to work properly which is similar to your problem.

  • Does saving a filled -PDF form using Ctrl+P work in Reader?

    I am using Acrobat Pro XI version on my PC. I have created a form and saved it using Enable Reader Extensions. I have e-mailed it to a friend who uses Acrobat Reader on PC. She is able to fill the form but unable to save it. She tried saving it using Ctrl+P. Using this method,  the changes to the document were saved on her PC. But when she sent back the document, I am unable to see the changes. Can you please help me ASAP.  Why isn't save using Ctrl+P working??

    The reason the version number is important is because prior to version XI a special right has to be applied to the file in Acrobat for it to be savable in Reader.
    If you want the file to be compatible with the most versions then you should apply this right, via File - Save As Other - Reader-Extended PDF - Enable More Tools.

  • Day 3 on Mavericks and still having serious issues with the finder it simply is not working correctly. we have over 1000 files all stored using a number. When searching nothing comes up at all.

    3 Days using Maveriks and still cant find any files using our number system.
    I have tried searching using key words and job numbers but nothing is found or works !!
    Its a big problem
    Steve.

    Hi haha fresh tees,
    Thanks for visiting Apple Support Communities.
    If you're searching in Finder or Spotlight and don't get the results you expect, try reindexing your hard drive using these steps:
    Spotlight: How to re-index folders or volumes
    http://support.apple.com/kb/ht2409
    From the Apple () menu, choose System Preferences.
    Click Spotlight.
    Click the Privacy tab.
    Drag a folder or an entire volume (your hard drive) to the list.
    If prompted for confirmation, click OK.
    Remove the item or volume you just added to the list by clicking it and then clicking the minus ("-") button.
    Close Spotlight preferences.
    Spotlight will re-index the contents of the folder or volume.
    Cheers,
    Jeremy

  • Cant use Ctrl C or Ctrl V to copy pics or documents?

    I have tried to copy and paste pictures and word documents using Ctrl C and it is not working. What would cause this?

    '''CTRL+V '''is only used to Paste whatever you've copied.
    To copy an image in Firefox, right click it and choose "'''Save Image As'''".

  • I have a trial version of Photoshop CC. I am unable to use CTRL J, is there a setting I need to do to get it to work.

    I have a trial version of Photoshop CC. I am unable to use CTRL J, is there a setting I need to do to get it to work.

    Should work
    Supply pertinent information for quicker answers
    The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
    Adobe product and version number
    Operating system and version number
    The full text of any error message(s)
    What you were doing when the problem occurred
    Screenshots of the problem
    Computer hardware, such as CPU; GPU; amount of RAM; etc.
    Photoshop menu Help>System Info ... help identify you system hardware and software

  • The tab won't close with CTRL+W when i use CTRL+D

    Whenever I use '''CTRL+D''' (bookmark shortcut) in firefox, the '''CTRL+W''' (tab close shortcut) won't function any more and I should restart the firefox to able it again.

    You can check for problems with the sessionstore.js and sessionstore.bak files in the Firefox profile folder that store session data.
    Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox profile folder.
    *Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Multiple_profile_files_created
    Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost and you will have to recreate them (make a note or bookmark them if possible).
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    You can check for problems with preferences and rename or delete the prefs.js file and possible numbered prefs-##.js files and a possible user.js file to reset all prefs to the default value.
    *http://kb.mozillazine.org/Preferences_not_saved
    *http://kb.mozillazine.org/Resetting_preferences

  • How do I use cell number associated with iPad 2 3G

    How do I use cell number associated with iPad 2 3G

    For Messages you can can use your email address, the iPad doesn't have a phone number that you can use.

  • Help! I received a message on my iPhone that "phone Number Added to iPad4 [NAME of IPAD] is now using [PHONE NUMBER] for FaceTime and iMessage" and it is not my iPad!! What do I do, how do I shut them out??

    Help! I received a message on my iPhone that "phone Number Added to iPad4 [NAME of IPAD] is now using [PHONE NUMBER] for FaceTime and iMessage" and it is not my iPad!! What do I do, how do I shut them out??

    Use a strong password and set up Two Step Verification on your account.
    http://support.apple.com/kb/ht5570

  • I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

    I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

    The template is a document in itself, it is not applied to an existing document whether it is a Pages document or a Word document converted to a Pages document.
    You would need to either copy and paste content, using existing styles, or apply the styles to the converted Word document.
    You can Import the Styles from an existing document and those imported Styles can be used to override the current document's styles:
    Menu > Format > Import Styles
    The process is simplified if the styles use the same names, otherwise you will need to delete the style you don't want and replace it with the one that you do want when asked, then the substitution is pretty straightforward.
    Peter

  • If my phone service is disconnected, can I still use the number to iMessage? Under my setting in iMessages it only allows me to select my linked emails and the telephone number is there but grayed out and i can't seletect it !

    If my phone service is disconnected, can I still use the number to iMessage? Under my setting in iMessages it only allows me to select my linked emails and the telephone number is there but grayed out and i can't seletect it ! It wont activate. I just recentely got AT&T.  When I had verizon before and my phone got disconnected it allowed me to still iMessage off my number.

    If your phone service is disconnected, it's not your number any more.
    If you "just got AT&T", how can it be disconnected?

  • Problem with JMS migration when using Ctrl+C to stop the managed server in cluster

              Hi,
              I am having a clustered weblogic application running on Weblogic 7.0 SP5. My application
              uses JMS as a asynchrous communication. We have MDB which listens to these JMS
              messages.
              If something is being processed on Managed Server 1 and while the request is in
              process, i am stopping the the MAnaged SErver 1 using Ctrl+C.
              After this, i go to admin console and migrate teh JTA and JMS. After this, i am
              expecting other running Managed Server should restart the incomplete transaction.
              But this is not happening. The Managed Serve2 doesn't process the requst.
              But when i restart teh MAnaged SErver 1 again, it takes up the same request and
              processes it.
              Is this a known problem with Weblogic that it doesn't support Ctlr+C case?
              Please note that the same thing is working fine when i stop the server using Admin
              console(Normal shutdown OR forced shutdown).
              Any comments in this regards are apprecciated.
              Thanks,
              Naresh
              

              Hi,
              I am having a clustered weblogic application running on Weblogic 7.0 SP5. My application
              uses JMS as a asynchrous communication. We have MDB which listens to these JMS
              messages.
              If something is being processed on Managed Server 1 and while the request is in
              process, i am stopping the the MAnaged SErver 1 using Ctrl+C.
              After this, i go to admin console and migrate teh JTA and JMS. After this, i am
              expecting other running Managed Server should restart the incomplete transaction.
              But this is not happening. The Managed Serve2 doesn't process the requst.
              But when i restart teh MAnaged SErver 1 again, it takes up the same request and
              processes it.
              Is this a known problem with Weblogic that it doesn't support Ctlr+C case?
              Please note that the same thing is working fine when i stop the server using Admin
              console(Normal shutdown OR forced shutdown).
              Any comments in this regards are apprecciated.
              Thanks,
              Naresh
              

  • Hi. After I have loaded a picture into Photoshop some of the menu tools are greyed out and I cannot use the keyboard short cut, for instance I cannot use Ctrl   T to enter free transform mode. Also the toolbar is so small I cannot see the icons without ge

    Hi. After loading a picture into Photoshop some of the menu tools are greyed out and I cannot use the keyboard short cuts, for instance I cannot use Ctrl + T for free transform, how do I resolve this problem. In addition the tool Icons are so small I have to get close to the screen to see them, is there anyway the Icons can be made bigger without reducing the resolution of the screen.
    Thanks
    Derek

    Are you working on a background layer? If so, Ctrl + T will not work. Press Alt and double-click your background layer to convert to a normal layer (or right-click BG layer and select Layer from Background) and try again.
    If you're working in Photoshop CC 2014 you can go to Preferences > Experimental Features and tick "Scale UI 200% for high-density displays" to make your buttons and icons larger.

Maybe you are looking for