3.5 Copy Fail, Report Fail, Virtual Screen Wonkyness....

Running Lion on several macs. The admin app is 3.5, I guess the clients are 3.5.1
1) Copying to a client fails
2) Reports fail
3) Virtual Screens behave badly. If I vnc to a mac from an iPad or Linux Box I have start typing
the password *immediately* after the password entry appears or the app locks up.
What does one get for the eighty dollar cost of ARD, I feel like an investor in trapped in a Ponzi scheme...
Any workarounds to anything? ( I have been copying everything to my NAS and installing from there...)
Jerry

You're not alone, please see this thread: https://discussions.apple.com/thread/3194562?start=0&tstart=0
As for workarounds, the only workaround is to (on your admin computer), uninstall ARD and ARD client, then install 3.4.
Instructions are in the linked thread.

Similar Messages

Copying standard report transaction selection screen

Hi everybody,
How can we copy standard report transaction's VI05 selection screen to my custom report transaction's selection screen some zprogram . The problem is that when i am copying the selection screen into my programs screen, it is getting copied, but not as selection screen rather as normal screen. I have defined a transaction code for the same with the custom screen no as the selection screen but its giving a message that selection screen 9001 doesn't exist. However if i keep the selection screen as 1000 the screen in the standard transaction VI05 the transaction is executing fine.
But again the problem was that although it seems that the screen 1000 of the standard program for VI05 has been copied to my custom program but its not showing in the object list of my custom program. so I cannot do any changes which i require.
If anybody requires any clarification u can raise your doubts i will try to make it more clear.
Can any body help me with this?
Your help will be deeply appreciated.
Thanks a lot!
Best Wishes!
Regards
Prem

Hi Prem,
Even if the GUI Status is active, you cannot see two components of Standard Selection Screen.
1. All Selections - Push Button
2. Categories - Screen Block in the first with two options
2.1. OI_STAND
2.2. OI_BULK
This is becoz, there are enhancement spots included in the Standard program and the enhancement spots will not be copied, unless you copy them manually.
Check the same.
Regards,
-Syed.

"copying failed because you don't have permissions..." Windows 7?

First off, just so everyone doesn't point me to it, I saw this thread:
https://discussions.apple.com/thread/2466282?start=0&tstart=0
But my question has to do with Windows.
I had a Lenovo T60 laptop running Windows 7 with a 500GB HD. My iTunes library is nearly 460GB so I had it on an external drive. I recently took an older PC, dropped in 8GB of ram and a 1TB internal drive running Windows 7 64bit. I successfully moved the iTunes library to the new machine and ran it from the external HD. It isn't a beast of a machine by any means, but I figured since I have enough space on the internal drive, I'd move my iTunes library to it thinking it would help performance.
So I followed the instructions here:
http://support.apple.com/kb/ht4527
since that has info about consolidation and consolidated the library. Before I started, I let iTunes reorganize my media folder in the consolidate tab under File--> Library. Since it is such a huge library, I set it up and went to bed. When I woke up the next morning, the 'Copying failed' message was on my screen. Here is the kicker, and why I decided to post here: of the 460GB, over 200GB transferred just fine. It appears that just the music moved and that my video is all still on the external HD. I read the thread above and tried to figure out how to fix the permissions in Windows. I've set the permissions correctly in BOTH folders (the internal and external HD) and applied the changes to all of the files and folders below. After that, I ran it the consolidation again thinking it would pull the rest of the files but it didn't. The good news is that my iTunes library works and appears just fine: no missing media and performance has increased since many of the files are indexed on the internal drive.
Obviously the easiest way to do this is to figure out the permissions but at this point I don't think there is anything else to do on that front. The only thing left is to make the files no longer 'Read only' in the media folder and I'm terrified of doing that given the data that's in there. If there isn't an easy fix for the permissions, is there an easy way to:
1. Identify what hasn't been moved
2. Move it without making dupes in the collection.
3. Do the above while leaving a copy on the external HD as backup.
Even if I can't leave the files on the external HD, I just want to get it all in one place without spending a month removing duplicate files from the collection. I just really, really don't want to try this again fresh since almost half of it is already in place perfectly. Oh and I'm running iTunes 11. Thanks in advance for all of your help.

I haven't completely solved this, but I've made some headway.
Two things. First is that I figured out why the TV Shows didn't transfer, or at least I think I did: there was no "TV Shows" folder on my C: drive. So, rather than create a new folder called 'TV Shows' I found a TV show that I only have one episode of, right clicked on it and selected 'Show in WIndows Explorer.' I dragged and dropped it from the folder location to iTunes. I figured this way, if it duped in the Library, I could erase it. At first it looked like nothing happened. Then a while later I checked it and lo and behold, it was on the C: drive and there was a "TV Shows" folder. But, I tried to select 'Consolidate Library' and still got the message above.
Second is that I never noticed this before, but if you right click on a file you can select 'Cosolidate File.' Now, how this is different than consolidating your entire library is anyones guess as I can't seem to find any information on it. But I figured 'What the heck?' and tried it with my TV Shows. That worked, but I still got the message above after an unknown number copied. So now I am going to every bit of media on my left tab (Music, Movies, TV Shows, Podcasts, Books, Apps, Tones), selecting them all, right clicking and consolidating them. This seems to work for the vast majority of the files. However, I still have issues with some files not moving. Also, I'm finding a lot of the missing files from the original consolidation.
In any case, even though I'm getting closer to a solution, I haven't been able to fully solve it, nor do I understand exactly what the difference is between the two Consolidate options are. Any feedback is appreciated.

Time Machine copy failed with error:28

Usually I just say OK when Time Machine can't complete a backup in either my computer or my wife's, and a couple of months later I get the irritating message again.
This time, it keeps returning.   I have no idea what to do:
Here's a log:
2/16/13 3:46:23.127 PM com.apple.backupd[1325]: Starting automatic backup
2/16/13 3:46:23.914 PM com.apple.backupd[1325]: Backing up to: /Volumes/FreeAgent GoFlex Drive/Backups.backupdb
2/16/13 3:46:29.390 PM AppleMobileSync[1329]: [0x10020c310] |ISyncManager|Warning| Could not retrieve ISyncClient with id com.apple.Keychain!
2/16/13 3:46:29.398 PM SyncServer[1315]: [0x7fd152c0bec0] |SyncManager|Error| sync alert tool for com.apple.Mail is invalid: can't find /System/Library/Frameworks/Message.framework/Resources/MailSync
2/16/13 3:46:29.416 PM com.apple.backupd[1325]: Using file event preflight for Macintosh HD
2/16/13 3:46:36.243 PM com.apple.backupd[1325]: Will copy (8.16 GB) from Macintosh HD
2/16/13 3:46:36.441 PM com.apple.backupd[1325]: Found 1464 files (8.16 GB) needing backup
2/16/13 3:46:36.478 PM com.apple.backupd[1325]: 11.28 GB required (including padding), 13.29 GB available
2/16/13 3:46:43.180 PM Mail[192]: open on /Users/HBrazee/Library/Mail/V2/Mailboxes/Deleted Messages.mbox/9032643A-C8BE-4195-B233-E5A6A64E535C/Data/4/9/Messages/94014.emlx : No such file or directory
2/16/13 3:47:09.883 PM mdworker[1337]: Unable to talk to lsboxd
2/16/13 3:47:09.887 PM mdworker[1335]: Unable to talk to lsboxd
2/16/13 3:47:09.892 PM mdworker[1336]: Unable to talk to lsboxd
2/16/13 3:47:09.896 PM mdworker[1334]: Unable to talk to lsboxd
2/16/13 3:47:10.000 PM kernel[0]: Sandbox: sandboxd(1343) deny mach-lookup com.apple.coresymbolicationd
2/16/13 3:47:10.414 PM sandboxd[1343]: ([1337]) mdworker(1337) deny mach-lookup com.apple.ls.boxd
2/16/13 3:47:10.460 PM sandboxd[1343]: ([1335]) mdworker(1335) deny mach-lookup com.apple.ls.boxd
2/16/13 3:47:10.525 PM sandboxd[1343]: ([1336]) mdworker(1336) deny mach-lookup com.apple.ls.boxd
2/16/13 3:47:10.625 PM sandboxd[1343]: ([1334]) mdworker(1334) deny mach-lookup com.apple.ls.boxd
2/16/13 3:49:19.630 PM mdworker[1359]: Unable to talk to lsboxd
2/16/13 3:49:19.635 PM mdworker[1360]: Unable to talk to lsboxd
2/16/13 3:49:19.711 PM sandboxd[1362]: ([1359]) mdworker(1359) deny mach-lookup com.apple.ls.boxd
2/16/13 3:49:19.716 PM sandboxd[1362]: ([1360]) mdworker(1360) deny mach-lookup com.apple.ls.boxd
2/16/13 3:49:20.000 PM kernel[0]: Sandbox: sandboxd(1362) deny mach-lookup com.apple.coresymbolicationd
2/16/13 3:49:36.358 PM com.apple.usbmuxd[27]: _SendAttachNotification (thread 0x7fff73d59180): Device 1c:ab:a7:98:32:58@fe80::1eab:a7ff:fe98:3258._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
2/16/13 3:49:38.090 PM SyncServer[1365]: [0x7fc8f0c0bec0] |DataManager|Warning| Client com.apple.Mail sync alert tool path /System/Library/Frameworks/Message.framework/Resources/MailSync does not exist.
2/16/13 3:50:01.568 PM iTunes[203]: _NotificationSocketReadCallbackGCD (thread 0x7fff73d59180): Unexpected connection closure...
2/16/13 3:50:01.570 PM ath[254]: _NotificationSocketReadCallbackGCD (thread 0x7fff73d59180): Unexpected connection closure...
2/16/13 3:50:28.401 PM mdworker[1368]: Unable to talk to lsboxd
2/16/13 3:50:28.405 PM mdworker[1367]: Unable to talk to lsboxd
2/16/13 3:50:28.000 PM kernel[0]: Sandbox: sandboxd(1373) deny mach-lookup com.apple.coresymbolicationd
2/16/13 3:50:29.094 PM sandboxd[1373]: ([1368]) mdworker(1368) deny mach-lookup com.apple.ls.boxd
2/16/13 3:50:29.100 PM sandboxd[1373]: ([1367]) mdworker(1367) deny mach-lookup com.apple.ls.boxd
2/16/13 3:52:12.017 PM Mail[192]: open on /Users/HBrazee/Library/Mail/V2/POP-brazee.net/[email protected]/Sent Messages.mbox/9032643A-C8BE-4195-B233-E5A6A64E535C/Data/4/9/Messages/94034.emlx : No such file or directory
2/16/13 3:52:34.652 PM mdworker[1383]: Unable to talk to lsboxd
2/16/13 3:52:34.884 PM mdworker[1384]: Unable to talk to lsboxd
2/16/13 3:52:34.939 PM mdworker[1382]: Unable to talk to lsboxd
2/16/13 3:52:34.950 PM mdworker[1385]: Unable to talk to lsboxd
2/16/13 3:52:34.997 PM sandboxd[1390]: ([1383]) mdworker(1383) deny mach-lookup com.apple.ls.boxd
2/16/13 3:52:35.003 PM sandboxd[1390]: ([1384]) mdworker(1384) deny mach-lookup com.apple.ls.boxd
2/16/13 3:52:35.008 PM sandboxd[1390]: ([1382]) mdworker(1382) deny mach-lookup com.apple.ls.boxd
2/16/13 3:52:35.013 PM sandboxd[1390]: ([1385]) mdworker(1385) deny mach-lookup com.apple.ls.boxd
2/16/13 3:52:35.000 PM kernel[0]: Sandbox: sandboxd(1390) deny mach-lookup com.apple.coresymbolicationd
2/16/13 3:54:21.305 PM Dock[138]: no information back from LS about running process
2/16/13 3:54:21.309 PM lsboxd[233]: @AE relay 61657674:6f646f63
2/16/13 3:54:21.000 PM kernel[0]: Sandbox: sandboxd(1401) deny mach-lookup com.apple.coresymbolicationd
2/16/13 3:54:24.631 PM com.apple.XType.FontHelper[1406]: FontHelper: message received. (<dictionary: 0x7ffc64800c60> { count = 2, contents =
    "query" => <string: 0x7ffc64800dc0> { length = 105, contents = "com_apple_ats_name_postscript == "Arial,Bold" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
    "restricted" => <bool: 0x7fff74932320>: true
2/16/13 3:54:24.632 PM com.apple.XType.FontHelper[1406]: AutoActivation: scopes (
    "/Library/Application Support/Apple/Fonts"
2/16/13 3:54:24.808 PM com.apple.XType.FontHelper[1406]: FontHelper: message received. (<dictionary: 0x7ffc64800810> { count = 2, contents =
    "query" => <string: 0x7ffc64800970> { length = 111, contents = "com_apple_ats_name_postscript == "Arial,BoldItalic" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
    "restricted" => <bool: 0x7fff74932320>: true
2/16/13 3:54:24.809 PM com.apple.XType.FontHelper[1406]: AutoActivation: scopes (
    "/Library/Application Support/Apple/Fonts"
2/16/13 3:54:25.052 PM WindowServer[102]: CGXDisableUpdate: UI updates were forcibly disabled by application "Preview" for over 1.00 seconds. Server has re-enabled them.
2/16/13 3:54:25.584 PM WindowServer[102]: reenable_update_for_connection: UI updates were finally reenabled by application "Preview" after 1.53 seconds (server forcibly re-enabled them after 1.00 seconds)
2/16/13 3:54:30.628 PM sandboxd[1401]: ([192]) Mail(192) deny file-read-data /Users/HBrazee/Library/Preferences/com.apple.DownloadAssessment.plist
2/16/13 3:54:49.692 PM mdworker[1411]: Unable to talk to lsboxd
2/16/13 3:54:49.696 PM mdworker[1410]: Unable to talk to lsboxd
2/16/13 3:54:49.818 PM sandboxd[1416]: ([1411]) mdworker(1411) deny mach-lookup com.apple.ls.boxd
2/16/13 3:54:49.823 PM sandboxd[1416]: ([1410]) mdworker(1410) deny mach-lookup com.apple.ls.boxd
2/16/13 3:54:50.000 PM kernel[0]: Sandbox: sandboxd(1416) deny mach-lookup com.apple.coresymbolicationd
2/16/13 3:55:11.964 PM WindowServer[102]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
2/16/13 3:55:11.986 PM Mail[192]: open on /Users/HBrazee/Library/Mail/V2/POP-brazee.net/[email protected]/Deleted Messages.mbox/9032643A-C8BE-4195-B233-E5A6A64E535C/Data/4/9/Messages/94057.emlx : No such file or directory
2/16/13 3:57:17.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1438[GoogleSoftwareUp] clearing CS_VALID
2/16/13 3:57:19.177 PM GoogleSoftwareUpdateDaemon[1440]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
    com.google.Keystone.Daemon.UpdateEngine: 2 connection(s)
    com.google.Keystone.Daemon.Administration: 0 connection(s)
2/16/13 3:57:19.332 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateEngine updateProductID:] KSUpdateEngine updating product ID: "com.google.Keystone"
2/16/13 3:57:19.445 PM GoogleSoftwareUpdateDaemon[1440]: -[KSCheckAction performAction] KSCheckAction checking 1 ticket(s).
2/16/13 3:57:19.554 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {(
    <KSTicket:0x585250
        productID=com.google.Keystone
        version=1.1.0.3659
        xc=<KSPathExistenceChecker:0x582eb0 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/>
        serverType=Omaha
        url=https://tools.google.com/service/update2
        creationDate=2010-06-26 00:04:18
    >
Using server: <KSOmahaServer:0x292b10
    engine=<KSDaemonUpdateEngine:0x287110>
    params={
        EngineVersion = "1.1.0.3659";
        ActivesInfo = {
            "com.Google.GoogleEarthPlus.intel" = {
                LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
            "com.google.Chrome" = {
                LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
                LastActiveDate = 2012-11-25 19:27:11 +0000;
                LastActivePingDate = 2012-11-26 08:00:15 +0000;
            "com.google.Keystone" = {
                LastRollCallPingDate = 2013-02-16 08:00:39 +0000;
                LastActivePingDate = 2013-02-16 08:00:39 +0000;
                LastActiveDate = 2013-02-16 22:57:18 +0000;
            "com.google.musicmanager" = {
                LastActivePingDate = 2012-07-29 06:59:48 +0000;
                LastActiveDate = 2012-07-28 19:04:42 +0000;
                LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
        UserInitiated = 0;
        IsSystem = 1;
        OmahaOSVersion = "10.8.2_i486";
        Identity = KeystoneDaemon;
        AllowedSubdomains = (
            ".omaha.sandbox.google.com",
            ".tools.google.com",
            ".www.google.com",
            ".corp.google.com"
>
2/16/13 3:57:19.867 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x2973e0
    server=<KSOmahaServer:0x292b10>
    url="https://tools.google.com/service/update2"
    runningFetchers=0
    tickets=1
    activeTickets=0
    rollCallTickets=0
    body=
        <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
        <o:gupdate xmlns:o="http://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1">
            <o:os platform="mac" version="MacOSX" sp="10.8.2_i486"></o:os>
            <o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="966" brand="GGLG">
                <o:updatecheck></o:updatecheck>
            </o:app>
        </o:gupdate>
>
2/16/13 3:57:29.555 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction(KSServerUpdateRequestDelegate) serverRequest:fetchedWithResponse:] KSUpdateCheckAction received KSServerUpdateResponse: <KSOmahaServerUpdateResponse:0x298e70
    server=<KSOmahaServer:0x292b10>
    url="https://tools.google.com/service/update2"
    status=200
    tickets=1
    activeTickets=0
    rollCallTickets=0
    data=
        <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
        <gupdate xmlns="http://www.google.com/update2/response" protocol="2.0" server="prod">
            <daystart elapsed_seconds="53810"></daystart>
            <app appid="com.google.Keystone" status="ok">
                <updatecheck status="noupdate"></updatecheck>
            </app>
        </gupdate>
>
2/16/13 3:57:29.864 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )}
2/16/13 3:57:29.934 PM GoogleSoftwareUpdateDaemon[1440]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch.
2/16/13 3:57:29.937 PM GoogleSoftwareUpdateDaemon[1440]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply.
2/16/13 3:57:29.938 PM GoogleSoftwareUpdateDaemon[1440]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply.
2/16/13 3:57:29.942 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete.
2/16/13 3:57:30.431 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateEngine updateAllProducts] KSUpdateEngine updating all installed products.
2/16/13 3:57:30.434 PM GoogleSoftwareUpdateDaemon[1440]: -[KSCheckAction performAction] KSCheckAction checking 2 ticket(s).
2/16/13 3:57:30.476 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {(
    <KSTicket:0x28ec80
        productID=com.google.Chrome
        version=24.0.1312.57
        xc=<KSPathExistenceChecker:0x29adc0 path=/Applications/Google Chrome.app>
        serverType=Omaha
        url=https://tools.google.com/service/update2
        creationDate=2010-06-18 13:11:31
        tagPath=/Applications/Google Chrome.app/Contents/Info.plist
        tagKey=KSChannelID
        brandPath=/Library/Google/Google Chrome Brand.plist
        brandKey=KSBrandID
        versionPath=/Applications/Google Chrome.app/Contents/Info.plist
        versionKey=KSVersion
    >,
    <KSTicket:0x29fe80
        productID=com.google.Keystone
        version=1.1.0.3659
        xc=<KSPathExistenceChecker:0x2977f0 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/>
        serverType=Omaha
        url=https://tools.google.com/service/update2
        creationDate=2010-06-26 00:04:18
    >
Using server: <KSOmahaServer:0x595c80
    engine=<KSDaemonUpdateEngine:0x287110>
    params={
        EngineVersion = "1.1.0.3659";
        ActivesInfo = {
            "com.Google.GoogleEarthPlus.intel" = {
                LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
            "com.google.Chrome" = {
                LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
                LastActiveDate = 2012-11-25 19:27:11 +0000;
                LastActivePingDate = 2012-11-26 08:00:15 +0000;
            "com.google.Keystone" = {
                LastRollCallPingDate = 2013-02-16 08:00:39 +0000;
                LastActivePingDate = 2013-02-16 08:00:39 +0000;
                LastActiveDate = 2013-02-16 22:57:18 +0000;
            "com.google.musicmanager" = {
                LastActivePingDate = 2012-07-29 06:59:48 +0000;
                LastActiveDate = 2012-07-28 19:04:42 +0000;
                LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
        UserInitiated = 0;
        IsSystem = 1;
        OmahaOSVersion = "10.8.2_i486";
        Identity = KeystoneDaemon;
        AllowedSubdomains = (
            ".omaha.sandbox.google.com",
            ".tools.google.com",
            ".www.google.com",
            ".corp.google.com"
>
2/16/13 3:57:30.577 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x290140
    server=<KSOmahaServer:0x595c80>
    url="https://tools.google.com/service/update2"
    runningFetchers=0
    tickets=2
    activeTickets=0
    rollCallTickets=0
    body=
        <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
        <o:gupdate xmlns:o="http://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1">
            <o:os platform="mac" version="MacOSX" sp="10.8.2_i486"></o:os>
            <o:app appid="com.google.Chrome" version="24.0.1312.57" lang="en-us" installage="974" brand="GGRM">
                <o:updatecheck></o:updatecheck>
            </o:app>
            <o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="966" brand="GGLG">
                <o:updatecheck></o:updatecheck>
            </o:app>
        </o:gupdate>
>
2/16/13 3:57:31.427 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction(KSServerUpdateRequestDelegate) serverRequest:fetchedWithResponse:] KSUpdateCheckAction received KSServerUpdateResponse: <KSOmahaServerUpdateResponse:0x29a970
    server=<KSOmahaServer:0x595c80>
    url="https://tools.google.com/service/update2"
    status=200
    tickets=2
    activeTickets=0
    rollCallTickets=0
    data=
        <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
        <gupdate xmlns="http://www.google.com/update2/response" protocol="2.0" server="prod">
            <daystart elapsed_seconds="53812"></daystart>
            <app appid="com.google.Chrome" status="ok">
                <updatecheck status="noupdate"></updatecheck>
            </app>
            <app appid="com.google.Keystone" status="ok">
                <updatecheck status="noupdate"></updatecheck>
            </app>
        </gupdate>
>
2/16/13 3:57:31.430 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )}
2/16/13 3:57:31.479 PM GoogleSoftwareUpdateDaemon[1440]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch.
2/16/13 3:57:31.480 PM GoogleSoftwareUpdateDaemon[1440]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply.
2/16/13 3:57:31.482 PM GoogleSoftwareUpdateDaemon[1440]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply.
2/16/13 3:57:31.487 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete.
2/16/13 3:57:33.732 PM GoogleSoftwareUpdateDaemon[1440]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
    com.google.Keystone.Daemon.UpdateEngine: 1 connection(s)
    com.google.Keystone.Daemon.Administration: 0 connection(s)
2/16/13 3:57:49.201 PM GoogleSoftwareUpdateDaemon[1440]: -[KeystoneDaemon main] GoogleSoftwareUpdateDaemon inactive, shutdown.
2/16/13 3:58:22.082 PM mdworker[1575]: Unable to talk to lsboxd
2/16/13 3:58:22.088 PM mdworker[1576]: Unable to talk to lsboxd
2/16/13 3:58:24.000 PM kernel[0]: Sandbox: sandboxd(1580) deny mach-lookup com.apple.coresymbolicationd
2/16/13 3:58:25.365 PM sandboxd[1580]: ([1575]) mdworker(1575) deny mach-lookup com.apple.ls.boxd
2/16/13 3:58:25.469 PM sandboxd[1580]: ([1576]) mdworker(1576) deny mach-lookup com.apple.ls.boxd
2/16/13 3:59:36.358 PM mdworker[1587]: Unable to talk to lsboxd
2/16/13 3:59:36.362 PM mdworker[1586]: Unable to talk to lsboxd
2/16/13 3:59:36.503 PM sandboxd[1588]: ([1587]) mdworker(1587) deny mach-lookup com.apple.ls.boxd
2/16/13 3:59:36.508 PM sandboxd[1588]: ([1586]) mdworker(1586) deny mach-lookup com.apple.ls.boxd
2/16/13 3:59:36.000 PM kernel[0]: Sandbox: sandboxd(1588) deny mach-lookup com.apple.coresymbolicationd
2/16/13 4:00:08.980 PM firefox[1592]: invalid drawable
2/16/13 4:00:10.701 PM WindowServer[102]: CGXDisableUpdate: UI updates were forcibly disabled by application "Firefox" for over 1.00 seconds. Server has re-enabled them.
2/16/13 4:00:10.813 PM WindowServer[102]: reenable_update_for_connection: UI updates were finally reenabled by application "Firefox" after 1.11 seconds (server forcibly re-enabled them after 1.00 seconds)
2/16/13 4:00:24.543 PM com.apple.usbmuxd[27]: _SendAttachNotification (thread 0x7fff73d59180): Device 1c:ab:a7:98:32:58@fe80::1eab:a7ff:fe98:3258._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
2/16/13 4:00:26.787 PM SyncServer[1604]: [0x7f9f7ac0bec0] |DataManager|Warning| Client com.apple.Mail sync alert tool path /System/Library/Frameworks/Message.framework/Resources/MailSync does not exist.
2/16/13 4:00:30.376 PM mdworker[1594]: Unable to talk to lsboxd
2/16/13 4:00:30.379 PM mdworker[1595]: Unable to talk to lsboxd
2/16/13 4:00:30.468 PM sandboxd[1606]: ([1594]) mdworker(1594) deny mach-lookup com.apple.ls.boxd
2/16/13 4:00:30.481 PM sandboxd[1606]: ([1595]) mdworker(1595) deny mach-lookup com.apple.ls.boxd
2/16/13 4:00:30.000 PM kernel[0]: Sandbox: sandboxd(1606) deny mach-lookup com.apple.coresymbolicationd
2/16/13 4:00:43.702 PM iTunes[203]: _NotificationSocketReadCallbackGCD (thread 0x7fff73d59180): Unexpected connection closure...
2/16/13 4:00:43.705 PM ath[254]: _NotificationSocketReadCallbackGCD (thread 0x7fff73d59180): Unexpected connection closure...
2/16/13 4:01:42.495 PM mdworker[1611]: Unable to talk to lsboxd
2/16/13 4:01:42.499 PM mdworker[1612]: Unable to talk to lsboxd
2/16/13 4:01:42.599 PM sandboxd[1613]: ([1611]) mdworker(1611) deny mach-lookup com.apple.ls.boxd
2/16/13 4:01:42.608 PM sandboxd[1613]: ([1612]) mdworker(1612) deny mach-lookup com.apple.ls.boxd
2/16/13 4:01:42.000 PM kernel[0]: Sandbox: sandboxd(1613) deny mach-lookup com.apple.coresymbolicationd
2/16/13 4:02:01.167 PM WindowServer[102]: CGXSetWindowProperty: Invalid window 0x131
2/16/13 4:02:01.167 PM WindowServer[102]: kCGErrorIllegalArgument: _CGXAddWindowToWindowOrderingGroup: error setting window property
2/16/13 4:02:29.971 PM KernelEventAgent[45]: tid 00000000 received event(s) VQ_LOWDISK (4)
2/16/13 4:02:29.972 PM KernelEventAgent[45]: tid 00000000 type 'hfs', mounted on '/Volumes/FreeAgent GoFlex Drive', from '/dev/disk1s3', low disk
2/16/13 4:02:29.000 PM kernel[0]: HFS: Low Disk: Vol: FreeAgent GoFlex Drive freeblks: 38399, warninglimit: 38400
2/16/13 4:02:55.923 PM KernelEventAgent[45]: tid 00000000 received event(s) VQ_LOWDISK, VQ_VERYLOWDISK (516)
2/16/13 4:02:55.000 PM kernel[0]: HFS: Vol: FreeAgent GoFlex Drive Very Low Disk: freeblks: 25599, dangerlimit: 25600
2/16/13 4:02:55.926 PM KernelEventAgent[45]: tid 00000000 type 'hfs', mounted on '/Volumes/FreeAgent GoFlex Drive', from '/dev/disk1s3', low disk, very low disk
2/16/13 4:02:55.929 PM mds[39]: (Warning) Volume: Indexing reset and suspended on backup volume "/Volumes/FreeAgent GoFlex Drive" because it is low on disk space.
2/16/13 4:03:40.000 PM kernel[0]: memorystatus_thread: idle exiting pid 1474 [cfprefsd]
2/16/13 4:03:43.211 PM com.apple.launchd[1]: (com.apple.XType.FontHelper[1406]) Exited: Killed: 9
2/16/13 4:03:43.000 PM kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
2/16/13 4:03:43.000 PM kernel[0]: macx_swapon SUCCESS
2/16/13 4:03:43.000 PM kernel[0]: memorystatus_thread: idle exiting pid 1406 [XType.FontHelper]
2/16/13 4:03:52.000 PM kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
2/16/13 4:03:52.000 PM kernel[0]: macx_swapon SUCCESS
2/16/13 4:03:52.849 PM com.apple.launchd[1]: (com.apple.iCloudHelper[1218]) Exited: Killed: 9
2/16/13 4:03:52.000 PM kernel[0]: memorystatus_thread: idle exiting pid 1218 [com.apple.iCloud]
2/16/13 4:03:53.571 PM mdworker[1619]: Unable to talk to lsboxd
2/16/13 4:03:53.000 PM kernel[0]: Sandbox: sandboxd(1627) deny mach-lookup com.apple.coresymbolicationd
2/16/13 4:03:53.585 PM mdworker[1622]: Unable to talk to lsboxd
2/16/13 4:03:53.672 PM sandboxd[1627]: ([1619]) mdworker(1619) deny mach-lookup com.apple.ls.boxd
2/16/13 4:03:53.677 PM sandboxd[1627]: ([1622]) mdworker(1622) deny mach-lookup com.apple.ls.boxd
2/16/13 4:03:53.690 PM mdworker[1621]: Unable to talk to lsboxd
2/16/13 4:03:53.692 PM mdworker[1620]: Unable to talk to lsboxd
2/16/13 4:03:53.711 PM sandboxd[1627]: ([1621]) mdworker(1621) deny mach-lookup com.apple.ls.boxd
2/16/13 4:03:53.786 PM sandboxd[1627]: ([1620]) mdworker(1620) deny mach-lookup com.apple.ls.boxd
2/16/13 4:04:05.629 PM KernelEventAgent[45]: tid 00000000 received event(s) VQ_LOWDISK (4)
2/16/13 4:04:05.629 PM KernelEventAgent[45]: tid 00000000 type 'hfs', mounted on '/Volumes/FreeAgent GoFlex Drive', from '/dev/disk1s3', low disk
2/16/13 4:04:21.928 PM com.apple.backupd[1325]: Stopping backup.
2/16/13 4:04:21.954 PM com.apple.backupd[1325]: Error: (-34) SrcErr:NO Copying /Users/HBrazee/Documents/Virtual Machines.localized/Microsoft Windows XP.vmwarevm/winxp-s003.vmdk to /Volumes/FreeAgent GoFlex Drive/Backups.backupdb/Howard Brazee’s Computer/2013-02-15-184254.inProgress/07592BCC-A3D7-4879-B08D-C01FDDF1895A/Maci ntosh HD/Users/HBrazee/Documents/Virtual Machines.localized/Microsoft Windows XP.vmwarevm
2/16/13 4:05:16.286 PM com.apple.backupd[1325]: Copied 14628 files (14.03 GB) from volume Macintosh HD.
2/16/13 4:05:16.286 PM com.apple.backupd[1325]: Copy stage failed with error:28

>>> Enter Time Machine and manually delete unnecessary backups to make
>>> sufficient room for new ones.
>>
>>
>> I haven't figured out how to do this.   Where is this setting?
>
> I have not figured this out either. But there is a command line
> program tmutil (time machine utility) that can delete backups, and
> also do much more. I am not an expert in this area, so I can only
> suggest that you open a Terminal.app and type
>     man tmutil
>
> Be careful Howard. If Time Machine is not able to delete old backup
> jobs, something is wrong with your backup disk.
If I recall correctly you do this by going on to TM and using one of the
pull down menus in the top apple menu strip ....
I myself am having problems with TM. I erased the external target disk and
started TM again. However it stops wverytime and refuses to backup ..
Telling me there isn't enough room even though the ext space is much
bigger. It also quotes the size of my HD content about 20% bigger than
finder says weird.
Howard (another one...)
============
1. Enter the time Machine
2. Scroll back it time for a few generations
3. Select the folder(s) to delete
4. Under the "Action" item (or gear icon), select the delete option you
want.
=================
> The last couple of days my Time Machine has run out of space during
> backups (error 28).
Just to be certain, is that really "28" or is it "-28"? (I assume it is
a positive error number, as error -28 is
> In the past, when I've seen this, I just say OK, and the problem goes away
> by itself, as it clears up space.
>
> My FreeAgent GoFlex Drive is 1 TB, while my Mac drive is 500.11 GB.
>
> I tried using Disk Utility to fix permissions, but those buttons were
> greyed out.   Disk Utility did not find any problem with the disk.
Repair Permissions is not relevant for Time Machine backups. It only
repairs permissions on files installed by the OS X Installer application
(or the OS installation or preinstalled OS, or Software Update). TM
backups don't qualify.
In any case, Time Machine deletes old backups using root privileges so
it doesn't care about permissions on the backup drive.
> Time Machie preferences show 13.3 GB of 1 TB available.
>
> I haven't been adding stuff to my computer lately more than getting
> mail.
>
> Oldest backup: December 29, 2012
> Latest backup: February 15, 2013
>
> Excluded from backups is the backup drive, my downloads folder, and my
> Mobile Documents folder.
>
> Estimated size of full backup 397.5 GB
Something odd is happening here. Given your described usage, you should
not be chewing through 1 TB of backups in less than three months. I've
gone more than a year on a drive with a similar ratio and not filled it
(and I am backing up my downloads, sometimes two or three times as I
move them to other folders).
Has anything major been done to the computer within that timeframe, e.g.
installing a new hard drive, or erasing the main drive and restoring
from backup? If so, that drive is treated as a new one and would require
another full backup, leaving the old one there.
A similar possibility is if Time Machine thought the computer had been
replaced, which would result in a new backup being started, and would
also leave the old backup unable to be deleted automatically.
In this case, you wouldn't be able to directly access the backups prior
to the change using "Enter Time Machine", but could get to them by
holding down the Option key and choosing "Browse Other Backup Disks"
from the Time Machine menu.
> What suggestions do you have for me to resolve this issue.
Which OS X version are you running?
Have a look in system.log (using Console) to see if Time Machine logged
any relevant information when the backup failed. Look for references to
"backupd" (which is the background software which does Time Machine
backups).
=============

Remote client copy fails.

Remote client copy fails.
The error message and info is given below. Help me to proceed.
Client copy
The client copy you started has terminated
Client Copy could not start because of Repository differences
Diagnosis
The table definitions differ between the systems. These differences mean that a copy of the data can cause a data loss and system inconsistencies. Differences occur when further developments were not transported or were copied between different maintenance levels.
Procedure
Transport all the developments of table structures between the systems using the Transport Organizer and bring your system to the same development level.
It is observed that some tables are missing in the target system. How do I copy the table structures to the target system?
Thanks in advance

Hello Ashraf,
There are repository differences between you source and traget system.
If you want to get the list of repository differences, then run a RFC check before you execute remote clinet copy.
You have to then remove these repository differences before you start with the remote client copy.
to remove the difference you have to:
"Transport all the developments of table structures between the systems using the Transport Organizer and bring your system to the same development level" as mentioned above
I would recommend you to go for Export / Import rather than Remote client copy.
There are several advantages of export import method over remote clinet copy
Regards,
Ammey Kesarkar
<i>'Award points for useful info'</i>

Large file copy fails through 4240 sensor

Customer attempts to copy a large file from a server in an IPS protected vlan to a host in an IPS un-protected vlan and the copy fails if file is greater than about 2Gbytes in size. If the server is moved to the un-protected vlan the copy succeeds. There are no events on the IPS suggesting any blocking or other actions.

The CPU does occasionly peak at 100% when transferring a large file but the copy often fails when the CPU is significantly lower. I know a 4240 has 300Mbit/s throughput but as I understood it traffic would still be serviced but would bypass the inspection process if exceeded, maybe a transition from inspection to non inspection causes the copy to fail like a tcp reset, I may try a sniffer.
I do have TAC involved but like to try and utilise the knowledge of other expert users like yourself to try and rectify issues. Thanks for your help. If you have any other comments please let me know, I will certainly post my findings if you are interested.

Client copy failed in SCM without livecache

Hi,
I am executing client copy on a SCM-EWM system with profile SAP_ALL. Client copy failed with error. How can I find what tables are not being copied?
The copy fail at post processing steps for this exit program "/SAPAPO/OM_CLNT_COPY_UPLOAD". My SCM system is not using LiveCache.
How do I confirm the copy is successful?
-Intan-

Hi Deepak,
I found this is error in the client copy logs :
BEFORE_EXP_ADDRESS3 310 Q43C000004 320
Exit program BEFORE_EXP_ADDRESS3 successfully executed 10:12:57
Exit program BDC_DELETE_SESSION successfully executed 10:12:57
Error: Table /1CN/CPHPHU00001 error in DDIC - Check table with SE14
The data object could not be created: The type /1C N/CPHPHU00001 does not exist.
Error: Table /1CN/CPHPHU00002 error in DDIC - Check table with SE14
The data object could not be created: The type /1C N/CPHPHU00002 does not exist.
Error: Table /1CN/CPWPWO00001 error in DDIC - Check table with SE14

Copy Failed "Error of Type -1402"

I upgraded to Tiger a few months ago. I am trying to reinstall some old programs from the MAC OS X 10.3.3 installation CD. However, specifically the applications. However, when I try and do this I get the following message and my cd spits out.
Copy Failed:
An error of type -1402 occurred while copying.
My guess is that I am trying to install applications from the 10.3.3 cd and should use the 10.3.4 cd? But, I need the older version applications. Is there any way to get these off my cd?
Thanks.

The error is:
errFSBadForkName = -1402, /* Fork name parameter is bad */
Use Pacifist to extract the installers. More than likely, Panther apps won't work with Tiger, but that's something for you to figure out.

Copying failed because you don't have permissions to change your iTunes me-

This is what it says: Copying failed because you don't have permissions to change your itunes media folder or a folder within it
I'm using iTunes media consolidation procedure to copy all media files from the existing folder on an external Lacie 180 GB firewire 400 to an external Hitachi duo pro 2TB firewire 400 that has a raid feature which is switch to 1 (essentially it does 2 copies on both disks at the same time)
It won't even copy a single file. I've tried to copy other stuff from the internal hard disk to the new 2TB disk and copies fine (5GB folder full of software). It only does this with iTunes.

I did what you suggested on all three folders: The main Music folder on the Mac hard disk, on the iTunes folder on the external 160GB Hard drive which contains the current media content and on the new 2TB hard disk on which I created a new media folder. I selected permission for myself which were already read+write and chose the apply to enclosed items on all three folders. I then changed the permission for others to read+write and applied to enclose items also an all three folders.
But it didn't solve anything.
Here's what happens: I choose the new directory in iTunes preferences (the media folder on the 2TB disk) I then go to File > Library > Organize Library and then choose Consolidate files. A window pops up and says copying "filename" with a progression bar underneath but the filename never changes. Instead the beachball appears when the mouse pointer hoovers over iTunes. Upon pressing the iTunes icon in the Dock it says that iTunes is not responding. At this point there's 2 different ways:
A - If I then force quit iTunes the iTunes window disappears but the application does not close. When I want to eject the 2TB disk it says it's being used by another application. Only when I cut the power to the 2TB disk does iTunes fully close. A window then pops up and says that the drive was not put away properly etc.
B - if I cut the power to the drive without force quitting iTunes, a window appears with the said: "Copying failed because you don't have permissions to change iTunes media folders etc." iTunes remains open and fully functional.

2008R2 Network File Copy Fails

Mystified on this one.
2008R2 SP1 server in remote location. Trying to copy files over the network either through Windows Copy/Paste, Robocopy, RSync...or you name it.
Copy fails at some point regardless of method. When using Windows Copy/Paste I get an error that says "There is a problem accessing \\SERVER\SHARE Make sure you are connected to the network and try again."
I have:
Upgraded the NIC drivers to the newest
Tried disabling TCP Chimney
Tried disabling all TCP offloads in NIC settins
Applied Hotfix # <cite class="vurls">2477730</cite>
Removed antivirus software and tried without it (Symantec SEP 12)
Windows Firewall is disabled
<cite class="vurls">Verified and even reset permission on the source and destination data</cite>
Network guy sees nothing as far as errors and problems on the line. When running a ping to the server in question, or from the server to the copy destination, there are no packet drops while the copying is running or when it fails.
I did notice in the security log there are a larger number of event ID 5156 and 5158, far more than similar servers in remote sites.

Hi,
Based on your description, we can try restarting the server in
Safe Mode with Networking to see whether we can copy the files.
Besides, although I think the following article may not be too much corresponding to our situation, we can give a try.
Fix Problems With Copying Large Files in Windows Vista
http://www.howtogeek.com/howto/windows-vista/fix-problems-with-copying-large-files-in-windows-vista/
Hope it helps.
Best regards,
Frank Shen

EnterVT failed for screen 0

hi guys
today i install Archlinux on my laptop, but after i install gnome, i can't startx.
the log shows 'EnterVT failed for screen 0'
i don't know how to fix this.
ps. in ubuntu 9.10 i set grub options 'splash nomodeset'.

This thread is over a year and a half old. Please read our forum policy and then open a new thread.
closing...

Add fields in KOB2 & KSB2 report in selection screen as well as output

Dear All,
I have an issue in which i have to add fields in KOB2 & KSB2 report.
i need to add below fields to KSB2 report.
1) Internal order
2) Vendor
3) Purchasing group
I also need to add profit centre in selection screen for KSB2
Similarly for KOB2 i need to add below fields
1) Cost centre
2) Vendor
3) Purchasing group
I also need to add cost centre as input for KOB2 report.
I have gone through note 325546 "CO line item reports: Creating a user-defined field" which can be helpful.
However i am not sure as to how do i add fields in input screen as required.
Other alternative is to create a Z report however when i try and copy the report both KOB2 & KSB2 call same report "RKAEP000".
I am not able to get as to how do i differentiate the call of different screens when ZKOB2 is called or when ZKSB2 is called.
I could identify " c_item_group" field having different values however i couldnot get a proper logic as to how correct screen can be called based on input
Please suggest .
Thanks,
Ronak

Hi Raymond,
The note 747588 is good as soon as you are adding fields from the same table only.
When I have added additional table into KAEP_SCOVP selection view below COVP (just because the extra fields I need are not in COVP) they will show up in KOB1 as selection criteria, but not getting saved.
Any idea if any ABAP should be regenerated or what extra steps are required when adding more tables into Selection View?
Thank you!

RESCIS - Unable to select custom report from Selection Screen

Hi all,
we have developed a custom report for transaction "RESCIS-Evaluation of service charge settlement" but we have found that althought the report appears in selection screen field called "REPORT" it throws message RESCIS003 but the report is not shown.
If we doesn't fulfill report field in selection screen, the program shows a second screen where a couple of ALVGrids are shown allowing the user to select the report that will be displayed. Here we are able to select our custom report and the data in it is displayed.
We have analyzed the standard program that is executed via transaction RESCIS and we've found that the selection screen executes standard function RESC_GUI_ANYREPORTS_APPL that doesn't executes reports dinamically but statically. That means that SAP doesn't allows to execute custom reports directly from selection screen.
I think this is a SAP error but afert opening an OSS message SAP sais that is not an error but a bad configuration or lack of knowledge for customizing it.
Has anyone developed a custom report for RESCIS transaction?

Hm what exactly did you want to change? Normally it is in REFX cases you should not copy standard REPORTS. In your case with transaction RESCIS, I myself do not see any need to add any functionality in this report because it is only a sum of all lists from your service charge settlement. What else do you want to see there?
For displaying new fields in the separate lists maybe there is some BADI for it.
Regards
Michael

Copied standard report shows error.

i just copied the standard report RM07DOCS TO YRM07DOCS
AND EXECUTED.
IT SAYS LAYOUT /GR VKP DOES NOT EXIST FOR YRM07DOCS.
and if i execute without giving any layout , it shows only few fields of output
PLEASE tell ME TO SOLVE THE PROBLEM to get the layout , and complete output..
Edited by: Dastagiri on Dec 7, 2011 4:30 AM

Dastagiri wrote:
i just copied the standard report RM07DOCS TO YRM07DOCS
> AND EXECUTED.
> IT SAYS LAYOUT /GR VKP DOES NOT EXIST FOR YRM07DOCS.
> and if i execute without giving any layout , it shows only few fields of output
>
> PLEASE tell ME TO SOLVE THE PROBLEM to get the layout , and complete output..
>
> Edited by: Dastagiri on Dec 7, 2011 4:30 AM
Hi,
How did you copy your report? Check if there are includes in program RM07DOCS and it is copied in you Z report.
Also, check if your selection is made thru Screen-painter?
Reetesh
Edited by: Reetesh on Dec 7, 2011 5:40 AM

Report without input screen working diffrently in debugging and background

hai,frds
I have one report without input-screen,But it is working diffrently in background and debugger.
please help me for this and i am bapi inside the program to create entries.but
if its in debugging it is crates corectly but if is in back ground it not working cooetly bapi working one time only.
plese help me for this.
Moderator Message: Too much of text-speak/sms-speak. Thread Locked. Write complete words and check their spellings using the Spell-Check tool in the editor here.
Edited by: kishan P on Jan 19, 2012 4:40 PM

HI,
In SM37,Put the cursor on the Job, Type 'JDBG' in Command line and press Enter.
You can able to debug your Background job now.
Find out where it is going wrong.....
how to debug background job

3.5 Copy Fail, Report Fail, Virtual Screen Wonkyness....

Similar Messages

Maybe you are looking for