3 external IP's, one WRT610N, 2 PC's and a NAS

Can it be done with what I have? Here's my situation:
I have a modem (fiber optic) which comes with 3 LAN out's, each of them with a designated fixed global IP (x.x.x.26-28). I have been using one of these (.26) with my WRT610N (Internet port) to connect my laptops etc. Easy enough. Now I recently I got a Synology DS107+ NAS. Of course, if I connect it to one of the WRT610N LAN ports it gets a 192.168.1.x address like my other devices and is reachable from the outside world via x.x.x.26. But, is there a way for me to give it one of the other global unused IP's (ie, x.x.x.27)? Could I connect a second of the modem LAN out's directly to the WRT610N (LAN) and somehow route everything that reaches x.x.x.27 to the NAS while everything that reaches x.x.x.26 gets handled by the router/NAT
Or do I need some extra gadget to do this. (I cant connect the modem directly to the NAS since the modem doesnt support gigabit LAN)
Solved!
Go to Solution.

You can only connect the modem and the WRT610N using one wire, not two.
When you say that you have three "fixed global IP" addresses, I assume that you mean that you have three Internet addresses. Is that correct?
If so, then you have two possible solutions for your problem:
1) Add a gigabit switch, such as the SD2005 or SD2008, between your modem and the rest of your network. You should then be able to access each of the 3 fixed Internet addresses by plugging your devices into the switch. However, you might not want to plug your NAS into the switch, especially if your NAS has limited ability to protect itself from hackers. Also, you might prefer to keep your NAS attached to your WRT610N LAN. If so, try solution 2.
2) Solution 2 is to leave your NAS connected to the WRT610N LAN, but access it over the Internet via a port. Most NAS devices can be reached from the Internet by giving your NAS a fixed LAN IP address, then forwarding a port to that fixed address.

Similar Messages

GR/IR Account - one for internal vendor and another for external vendors

Hi Experts,
Can I have two GR/IR accounts - one for internal vendors and another for external vendors? Please let me know.
Thank you.
with regards,
Muthu Ganapathy.

Hi Muthu,
GR/IR accounts are not dependent on Vendors, they are dependent on Materials, to be precise on Plant/Valclass.
You can post to 2 different GR/IR accounts if you set up 2 different classes. then it is possible.
For setting up the same. Go to T.code : OBYC, Transaction : WRX.
Here Setup different GR/IR accounts per val.class.
Letme know if you need further info
Thanks
Kalyan

External Hard Drives: One for backup and one for storage

Is it possible to have two external hard drives, one firewire and the other usb, using one as an additional hard drive, and the other as the backup drive, and backup from the external that is the additional hard drive to the the other which is the external back up drive?

Wunjo:
Welcome to Apple Discussions.
It is possible, but not necessary. If you have a large enough firewire HDD you can partition it so that one partition is approximately the size (capacity) of your internal HDD. Then you can make a bootable clone of your internal HDD to this partition using a utility like SuperDuper or Carbon Copy Cloner. You can then regularly update this partition so that you always have an up-to-date backup of your internal HDD. This will serve as a backup of your internal HDD, as well as an emergency boot drive. You can also boot the computer from it to run diagnostic tests and repairs on the internal HDD.
The rest of your HDD can be used for whatever you wish. You can create additional partitions for different purposes, or just leave one large partition as a storage or work area. If you need directions for partitioning your HDD, do post back and ask.
Of course, if you already have a firewire and a USB drive, you can use them as indicated. In any case, you can partition the drives to serve multiple purposes.
Please do post back with further questions or comments.
Cheers
cornelius

I have a macbook pro in which i use for church recordings. it has a built in mic so like one hole for headphones and mic. how do i get it to only pick up the sound from the external mic that is coming into the mixer to the laptop. it seems to pick up ever

I have a macbook pro in which i use for church recordings. it has a built in mic so like one hole for headphones and mic. how do i get it to only pick up the sound from the external mic that is coming into the mixer to the laptop. it seems to pick up everything, like for example any little movement i make or even just asking the next person a question will get picked up by the internal mic. is there a way i can mute the internal mic so it can only pick the external mic and not every movement im making like chewing etc

I have a macbook pro in which i use for church recordings. it has a built in mic so like one hole for headphones and mic. how do i get it to only pick up the sound from the external mic that is coming into the mixer to the laptop. it seems to pick up everything, like for example any little movement i make or even just asking the next person a question will get picked up by the internal mic. is there a way i can mute the internal mic so it can only pick the external mic and not every movement im making like chewing etc

How do I unlock my external hard drives one has photos on them one is trying to run time machine and is not able to complete a basck up.

How do I unlock my external hard drives one has photos on them one is trying to run time machine and is not able to complete a basck up.

VK said for locked HDs and volumes at http://discussions.apple.com/thread.jspa?threadID=2329689
sudo chflags 0 /volumes/*
sudo chmod a+rx /volumes/*

1 Instance of iTunes - 2 External HDD's - One for music and One for Movies

Hello - How do I map 2 distinct HD's to my 1 instance of itunes. I want to have one with just music and one with just movies.
Thanks!!

You don't (easily).
iTunes does not like shortcut/alias/symbolic links.
I recommend you update your OS (10.6.4) or update your signature.

External USB Maxtor One-Touch 3 suddenly fails to mount on MacBook Pro:

External USB HD suddenly fails to mount on MacBook Pro:
My One Touch III 600GB drive, external power supply, suddenly will not mount and is not recognized by the system profiler or Disk Utility, however, drive, connected USB, appears under windows XP.
1. Power cable and usb cable working.
2. Using external AC adapter(not relying on USB power).
3. Other USB devices, mice, flash drives work on both USB ports.
4. Drive works on Windows, folders and data integrity ok.
5. Drive format is NTFS.
6. No Maxtor software installed.
7. No humming or strange noises emanating from drive.
8. No problem to January 14, 2008,
9. Mac OS 10.4.10 updates last downloaded and installed Jan 20, 2008.
10.1 blip of the light on "The One Touch Button", then light turns solid white.
Questions:
1. Does Apple set sleep or lock switch for devices (drives)?
2. If so, can it be reset manually?
3. Does Apple have configuration profile for devices, like a registry key?
4. If so, where is it located?
Configuration:
Dual 2 GHz MacBook Pro 15”
2 GB DDR SDRAM
OSX 10.4.10
2 USB Ports Left and Right

NOTE: This Update is required when using a OneTouch Drive as a bootable device. Seagate suggests that you dismount and disconnect your FireWire Drive before continuing.
Users have identified issues when connecting OneTouch External Drives to FireWire Ports on their Mac G4 and/or G5 computers. These Problems range from system hangs, kernel panics to slow data transfer rates. The cause of these problems has been traced back to the FireWire Driver. Seagate has resolved these problems through updated FireWire Drivers.
I am using USB and not trying to use drive as a boot device.

"Volume not found" I have 3 iphoto_libraries stored in a external disk, while the actual files are in other external disk. Ive moved together iphotolibraries and files but: HOW CAN I TELL THE LIBRARIES WHERE TO FIND THEM NOW?

I have three iphoto_libraries stored in a external disk PASSPORT (one for each trip imovie Im making -Ive managed this way the libraries so to not confuse the trips) while the actual files are in OTHER external disk LACIE. And everything was fine: imovie find each library, could work with it, or iphoto could edit the files.
But one day everything crashed at the same time: i opened iphoto to find 3 different scenarios:
1) iphoto_library GREECE was there, but not the albums i prepared. no events. when double click in any of them: "Volume not found"
2) iphoto_library ITALY was there, and the albums i prepared too, but empty.
in both cases I can only see the photos in 'photos' because 'events' shows some events with photo preview and some with no preview, just some kind of preset clipart palm tree, but if i enter the event, photos are there but again: when double click in any item: "Volume not found"
3) iphoto_library ISRAEL was there, the albums too, when double click in any of them: all OK
The 3 libraries was managed the same way. Meaning: Ive imported photos to iphoto from external disk LACIE in a iphotolibrary stored in another external disk PASSPORT. Also: I don't have unchecked the option "copy to file" or something like that. photos where moved, not copied. Also i have all the movie_libraries in the PASSPORT as well. What happened??
Solution? Nothing yet. Ive moved now all the photo folders from LACIE together in PASSPORT with the iphotolibraries but problem persist:
HOW CAN I TELL THE LIBRARIES WHERE TO LOOK FOR THE VOLUMES NOW?
"Volumes" are the original files aren't them?
Please help. this is so annoying to try and find in the forum, to tricky to explain
I have a Macbook pro retina Yosemite 10.10.1 / iphoto 9.6 (910-29)/ iMovie 10.0.6
THANK YOU
Vicky

The 3 libraries was managed the same way. Meaning: Ive imported photos to iphoto from external disk LACIE in a iphotolibrary stored in another external disk PASSPORT.
This is not clear, especially when you say
I don't have unchecked the option "copy to file" or something like that. photos where moved, not copied.
Especially as the message you're getting is typical of a library where the ' option "copy to file" or something like that' is unchecked.
So it's a simple question:
Are you these Managed or Referenced Libraries?
A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.

I have an external server that stores all my movies and music, is there a way to stream it to my apple tv? If not is there a way I can link the folders to itunes (without downloading files to computer) and will that make them view-able for the apple TV?

I have an external server that stores all my movies and music, is there a way to stream it to my apple tv?
If not is there a way I can link the folders to itunes (without downloading files to computer) that will make them view-able for the apple TV?
If none of that works is there a way to get it working alternativly?
Additional Information:
Everything is linked via ethernet cable.
I'm using a PC to set it up.
If you have any other questions feel free to ask and I'll help where I can.
Thank you for any help

(I think the daughter got he better end of the deal!) I believe if you change the password and user id one of the devices it will stop that from occurring. But I'm not the one to tell you how to do it; someone like "Illaass" (Illaass seems to know how to correct / fix almost anything!) will know how if you don't. Just look for the "cat" icon.

How can I use an external hard drive to both back up and free up storage on my macbook?

I've used a hard drive to back up my 2012 Macbook Pro via Time Machine, but I'm not sure how to use it as external storage to move things like video and music off of my Mac to free up memory and then how to move the same things from the hard drive on to other devices like my iPad or iPhone. For instance, I have a ton of movies and would like to store most of them on an external hard drive so that they aren't taking up all of my memory on my Mac, but want to be able to move them easily back onto my phone or iPad. Also, can I use the same hard drive to both back up my computer and use it for external storage? If so, how do I do that?

Always use two drives for this: one for backup; the other for storage. Don't mix the two uses on one drive. There's a greater risk of data lost without that redundancy.
If you plan to backup using Time Machine, then be sure the backup drive's capacity is at least twice that of the drive you are backing up.

I would like to connect an external hard drive to my time machine and use it as a network drive to store itunes and iPhoto how do i do this

I have just purchased a new my book hard drive and would like to connect it to my time capsule and store my itunes and iphoto contentent there to free up space on my internal hard drive . Can this be done and what is the process?

I'd like to store my Aperture /IMovie Libraries on an external hard drive.
That is fine and recommended.. use the fastest disk you can afford.. ie Thunderbolt>USB3>FW800>USB2.
In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the external library drives.
Let me be clear.. you want to partition the one disk.. use it for TM and move your files to the external disk.. and then backup to the same disk.. You can do it.. but that is not a backup.. that is an experiment in how long you can get away with running files and backups on the same disk before you lose everything.. like Russian Roulette.. pull the trigger enough times and laws of probability will do you in.
You must have backups on a different disk .. otherwise it is pointless.
Can I set up a RAID 5 format for redundancy?
No.. you can buy special USB and Thunderbolt external drives that support RAID..
BUT that is still not a backup.. let me show why.. you make a silly move and corrupt your file in aperture.. it is not that rare.
Raid will corrupt all copies of the files.. it is replicated across all disks.
Delete a photo it is deleted across all disks.. you have no recovery.
Alway, always consider RAID system one disk.. backup onto another disk.. and if the photos or movies are at all important to you.. ie your family .. make another copy and store in a relatives house.. There is no such thing as too much redundancy.

Can I have two Time Machine backup external drives on one Mac?

I have been using Time Machine for over a year and like it very much. The thought occurred to me that I should buy a new external drive that I can backup to and store at a remote location. I plan on making a backup each week, then taking this new drive to my office. That way, if my house ever burns down, I have a backup at my office too that will be a fairly recent backup.
When I unplugged my older external drive and tried to launch a backup using the new one, my Mac said it couldn't find my Time Machine drive. Won't it let me backup to two different drives? Or does it always need to backup to the same one?
Thanks!

polishedstaple wrote:
Won't it let me backup to two different drives?
Yes. All you have to do is tell it you've changed destinations, via +Time Machine Preferences > Select Disk.+ (Use different names for the drives, so you know which one is which.)
Try not to go too long between "swaps," though. After several days, especially if there's been a large volume of changes, Time Machine might do a new, full backup, instead of an incremental one.
However, I've learned over the years (mostly the hard way, of course ), never to trust my backups to a single app or piece of hardware: no app is perfect, and all hardware fails, sooner or later.
Like many here, I keep both full Time Machine backups, plus a "bootable clone" on a separate external HD. I use CarbonCopyCloner, many use the similar SuperDuper. That gives me the best of both types of backups, plus of course a completely separate, independent backup.
CCC is donationware; SD has a free version, but you need the paid one (about $30) to do updates instead of full replacements, or scheduling. Either is easily found via Google.
And/or, see Kappy's post on Basic Backup, complete with links to the web sites of each product.

How do I import an old iphoto library from an external hard disk while keeping my editing and organization in tact?

I am running iPhoto '08 on a MacBook Pro 2.2 GHz Intel C2D (MacBook Pro 3,1). I backed up my hard drive contents onto an external hard drive, then formatted my computer and installed Mountain Lion. I then re-installed iPhoto '08 and ran all the updates. Now, I would like to import my old library from the external disk onto my computer without losing my editing and organization; however, when I select "import to library" from iPhoto, the old iPhoto library is not a selectable option.
I know how to "show package contents" and import directly from the Original and Modified folders, but I don't want to lose my organization. Can I simply drag the content of those folders into my new Original and Modified folders? Will iPhoto read that correctly?
I tried to open the old library from the external disk, thinking to export them all to a folder and import from there, but that just opened my new library and none of the old photos were imported or available.
I'm running out of ideas and would appreciate any help you guys can give. Thanks!!

You don't import it.
Just drag the iphoto Library from the external to the Pictures Folder.
Then open it:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
Never import one Library to another. Every version and thumbnail is imported like a distinct photo, you lose all your Albums, Keywords etc., the link between Original and Previews is destroyed, the non-destructive editing feature is ruined and so on. In summary: it's mess.

My MacBook Pro hard drive is almost full and I wish to store my Aperture Library on an external drive, how do I do this and is the use of USB2 suitable or do I need to use a Firewire external hard drive?

My MacBook Pro hard drive is almost full and I wish to store my Aperture Library on an external drive, how do I do this and is the use of USB2 suitable or do I need to use a Firewire external hard drive?

You'll get better performance if you use a Firewire hard drive (especially if you buy a 7200 RPM drive). Firewire's IO speed is significantly faster than USB 2. USB 2 has a theoretical max speed of 480 Mbps except that it has extremely high over-head. The fastest speeds you can typically get are about 300 Mbps. Firewire, on the other hand, has very little overhead. The fastest speeds you can get are very nearly 800 Mbps. You will typically be constrained by the maximum read/write speed of the drive, not the speed of the I/O on the Firewire bus. Now if you had one of those nice shiny new Macs with the Thunderbolt I/O and a Thunderbolt drive (Light Peak) ... I think they alter space and time so that your data arrives before you know you want it.
Also... unless you want to buy a solid state drive (very expensive), try to keep your hard drives from becoming much more than about 60% full if you want great performance. A nearly "full" hard drive is, on average, only about half as fast as the same hard drive when nearly empty.
USB 2 will work perfectly fine... just not as fast.
Also... it's much safer to move the entire Aperture library than to "relocate masters". Your images must be managed. You can Aperture manage them, or you can manage them. But someone has to manage them. If you "relocate" them so that they are no longer stored inside the Aperture library then you'll need to work out a system of how you decide to organize things and it's critically important that you don't start moving files around or deleting things without Aperture's knowledge. If you do, you'll break the links to your masters and start having problems with missing masters. If you have Aperture manage the library then you don't need to worry about any of that stuff.... it's safer.
Do make backups (use the Aperture Vault or use some other backup program, but make sure you back up your work if you care about it.) There are only two kinds of hard drives in the world: (1) those that have failed and (2) those that are going to fail. There are no exceptions to this rule. Hard drives are cheap. Backup software is built into Aperture and into your Mac.

I want to format my external drive so that my new imac and my pc can read and write ,what should i do?

i want to format my external drive so that my new imac and my pc can read

Start by partitioning the drive as required for the Mac:
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Now click on the Erase tab in the main menu, then select ExFAT from the Format Type dropdown menu. Click on the Erase button. This format is read/write on both the Mac and the PC. If you have a problem with it on the PC, then format the drive the same way using the Windows formatter.

3 external IP's, one WRT610N, 2 PC's and a NAS

Similar Messages

Maybe you are looking for