3 identical machines (Aspire R3700) Fail at the same spot for Windows 10 Upgrade

I am trying to upgrade 3 identical machines (Aspire R3700) and they all fail at the same exact spot. This leads me to believe there is a hardware or driver issue for these. Am I missing something? I have tried all the suggested fixes for the error code recived but nothing works.

Ok, I'm not sure if you've tried any troubleshooting yet so forgive me if I'm suggesting things you've already tried. First, unplug anything you can, see if that works. If it doesn't, boot the Windows 10 USB (if you don't have one here are instructions on how to create one) and select "Repair PC". Try the troubleshooter, if that doesn't fix anything, try repair startup. If none of those options work, open the command prompt (under advanced options). Try entering "bootrec /fixmbr", if that doesn't work, try entering "sfc /scannow". There are also some more involved methouds that have had mixed sucess here. A last resort would be to format the drive and then attempt the install. Good luck and let me know how it goes.

Similar Messages

3 identical machines (Aspire REVO R3700) Fail at the same spot for Windows 10 Upgrade

I am trying to upgrade 3 identical machines (Aspire Revo R3700) and they all fail at the same exact spot. This leads me to believe there is a hardware or driver issue for these. Am I missing something? I have tried all the suggested fixes for the error code recived but nothing works.

, Hello and thanks for posting on the HP support forums. Here is the first thing you will want to try. This is the link to the Windows Updater Troubleshooter. If that fails to the issue then I would try rolling back to the previous operating system until more recent drivers and software are released for Windows 10 on the HP support page for your notebook. Here is the link to your support page. HP Pavilion g6-2241sa Notebook PC - Software and Drivers Please let me know how things go. Thanks again for the post and have a great day.

Updating to windows 10 fails on the "Configuring update for Windows 10" screen

Hi, I have a problem with the Windows 10 update on my Lenovo Miix 3 (8") tablet. Whenever the update succesfully downloads, runs the preparing stage for quite a bit, than prompts me to start the upgrade (in the windows 10 update app). When I click it initiates a restart and starts the "Configuring update for Windows 10" screen, but stays on 0% for a minute, than reboots the original system, and the update does not continue. As I log back in the Windows Update window pops up and after a few seconds prompts me to download windows 10 (again). I have already installed a windows 10 in a similar manner on a PC without any hickups. For me it looks like for whatever reason the update fails in the configuring stage, right before reboot. Anyone met this before and maybe have some solution, or should I just try it with a bootable pendrive?

I have same model and sadly, the same problem. It seems to me that the reboot interupts the install and when you sign in again it nulifies the install needing you to start again. On my laptop the reboots went back into the install without needing a login. Hopefully if enough people have same problem a remedy will be found.

I'm trying to update my iphone4 and the update is going extremely slow, it has been sitting In the same spot for 37 minutes now. Is that something to be concerned about?

I don't understand or know if it is bad that my phone is updating so slowly. I would like some advice on how I can get this process done.

Hello there, Mirandabear.
The following Knowledge Base article offers up some good steps to try for updating your iPhone:
Update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht4623
If it is taking too long for you over Wi-Fi, then syncing it by connecting to your computer might prove to be a faster option:
Update your device using iTunes
If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
If you use your device's Personal Hotspot for your computer's Internet connection, update your device wirelessly or connect your computer to another network.
Install the latest version of iTunes on your computer.
Plug in your device to your computer.
In iTunes, select your device.
In the Summary pane, click Check for Update.
Click Download and Update.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro

MDT Console with more then 15 machines, How to use the same drivers for more machines.

Hello,
I'm am looking for a solution to make our MDT design as effective as possible(as small as posible).
The Situation:
The company has more then 15 different computers added to the MDT console for the automated installation of Windows 7. The installations are done in 2 different ways, 1 with a local USB key installation (with the deployment folder on the USB key) and the other
installation is a network USB key installation (with the deployment folder on the server).
The local USB key exists for offices in parts of the world where the internet connection is poor.
The problem:
We have machines which can use the same driver for different kinds of hardware functions (LAN, WLAN, etc..)
If we add a new machine to the MDT and we don't check the box for "Import drivers even if they are duplicates of an existing driver" we will automatic use the driver which already exists in the deployment folder. If say half a year
later we stop using an older machine which "may" have drivers that are being used for other machines and we delete the machine from MDT we should
NOT check the box "Completely delete these items, even if there are copies in other folders". The problem is that this can also lead to a lot of unused drivers in the deployment folder also because we do not know exactly how many
computers are using a certain driver.
At the moment we have another deployment share with for each machine its own drivers installed (so some drivers will be multiple times in the deployment folder) as you can guess this becomes really big.(deployment folder of more then 24 GB). The advantage
of this is that we can delete a machine from the MDT list without having to worry if the drivers for that machine might be used by other machines. It is now just becoming to big in size(GB).
The Question:
Is there not an option within MDT that checks automatically if the drivers connected to a certain machine in MDT are being used by other machines? In this case we would check the box "Completely delete these items, even if there are copies in other folders"
and MDT would not delete the drivers which are still used for the installations of other computers.
Thanks in advance.
Greets,
Arie

Arie,
I think you are over-complicating this. Basically using drivers that already exist is the way to go. Otherwise drivers will be imported a second, third or fourth time. Which also takes up allot of disk space. If you're concerned about driver management,
then I would suggest to drop your concerns, since there is nothing to less you can do about this particular issue. As long as you don't delete the driver that's been imported earlier by another machine there is nothing to worry.
Ask yourself:
- how long am I going to support model x
- how many times do I want to update drivers
With selection profiles you can easily target which content needs to go where (on your USB drive of-course)
I can imagine that managing 25 shares for 25 different models, just because you 'refuse' to have old drivers in your share, or have removed support for some hardware models, isn't really time and energy efficient too.
If you take a look in your deploymentshare\control folders you will see some XML files. These XML files hold all the entries in your deploymentshare. So your drivers.xml and drivergroups.xml (depending on the number of groups you have) are going to be very
big XML files. These XML files are read by MDT to identify the objects in MDT and under which folder the objects are located.
It's not possible to create or have an dependency between driver files and hardware models, other then creating groups under "Out-of-box Drivers" and using selection profiles.
Another suggestion would be to decrease your number of hardware models drastically. On the other hand, having 25 Gb of offline media isn't really a big deal either. Portable and removable media of those sizes (32 and 64 Gb) isn't that expensive as it used
to be 5 years ago.
Don't get me wrong, I perfectly understand your desire to manage this, but MDT doesn't provide any other way, then the things I have pointed out to you here.
Good luck! :)
If this post is helpful please click "Mark for answer", thanks! Kind regards

HT201250 When restoring Time Machine after a failure, does it also restore the files to the same order, for example - within iPhoto I have pics/ videos in folders and sub folders organised as family/events etc - will it go back to this exact order after a

When restoring Time Machine after a failure, does it also restore the files to the same order, for example - within iPhoto I have pics/ videos in folders and sub folders organised as family/events etc - will it go back to this exact order after a restore?

Hi Stavros0203,
When restoring your entire system from a Time Machine backup, it is restored to the state it was when that backup was made. See this article for reference -
OS X Yosemite: Recover your entire system
Thanks for using Apple Support Communities.
Best,
Brett L

TS4147 I have 2 iphones on the same icloud for 2 different users. We (the users) dont want identical contacts. How do I delete the contats from one phone without deleting them from the other phone.

I have 2 iphones on the same icloud for 2 different users. We (the users) dont want identical contacts. How do I delete the contats from one phone without deleting them from the other phone.

You can't; not if the phones are sharing the same iCloud account. If you want to keep your data separate, migrate one of them to a different iCloud account. (You can continue to share the same iTunes ID.)
To do this, go to Settings>iCloud, tap Delete Account (this won't effect the other phone), choose Keep on My iPhone, sign back in with a different Apple ID to set up a new account, turn on your iCloud data syncing, then choose Merge to upload the data to the new account. You can then go to icloud.com from your computer and delete the other person's data from each account.
Another option if you're only concerned about not sharing contacts but wish to share everything else, is to set up a second iCloud account on one of the phones and sync contacts with the secondary account. To do this, go to Settings>iCloud, turn Contacts to Off and choose Keep on My iPhone. Then go to Settings>Mail,Contacts, Calendars>Add Account>iCloud, sign in with a different Apple ID to create the secondary account, and turn Contacts to On. You can then go to icloud.com from your computer and delete the other person's contacts from each account.

Looking for a One to Many script to extend the system partition for Windows 7 machines

Looking for a One to Many script to extend the system partition for Windows 7 machines

Pre-written scripts can be found in the repository:
http://gallery.technet.microsoft.com/scriptcenter
If you can't find what you need, you can request a script (no idea if anyone ever bothers to fulfill these requests though, I know I don't):
http://gallery.technet.microsoft.com/scriptcenter/site/requests
Let us know if you have any specific questions.
Don't retire TechNet! -
(Don't give up yet - 12,950+ strong and growing)

Can I use my creative cloud account at the same time for my iMac and my MacBook?

Can I use my creative cloud account at the same time for my iMac and my MacBook?

Thank you Sheena!!
Guy
Op 2-jan.-2015, om 12:16 heeft Sheena Kaul <[email protected]> het volgende geschreven:
Can I use my creative cloud account at the same time for my iMac and my MacBook?
created by Sheena Kaul <https://forums.adobe.com/people/Sheena+Kaul> in Adobe Creative Cloud - View the full discussion <https://forums.adobe.com/message/7059158#7059158>
Hi Guy Heyligen,
Absolutely. You can use the creative cloud account on two machines.
You may also refer to the link below:
Creative Cloud Help | Creative Cloud / Common Questions <http://helpx.adobe.com/creative-cloud/faq.html>
Regards,
Sheena
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7059158#7059158 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7059158#7059158
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Creative Cloud by email <mailto:[email protected].com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=46 70>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

All,
A very interesting NOTE to this thread. In order to try and get the "ignore permissions" box to show up in GET INFO (so I could execute Matt the Magician's solution to file sharing issues)-- I ran the terminal command for disabling ACLs on my internal HD / start up disk (as indicated in the linked thread to BDAqua's forum).
Although I understand that this was useless for disabling permissions on the start up disk (as everyone here pointed out) and allowing me to see the "ignore permissions" check box - somehow it did seem to fix my file sharing problem...and that was the root problem I wanted solved in the first place! After doing the terminal command and a quick reboot, I went in and tested file sharing on the chosen directory and I can create new files or work from existing files in the directory, with both users being able to modify / and save from both machines and each machine sees the revisions and can build from them. Bottom line - I'm stoked and want to thank everyone for their help.
The only other tweak I made was going over to my wife's machine and instead of using her log in / password, I just used my name and password to connect to my main machine that was sharing directories. Maybe that's what fixed the problem or the ACL disable but either way...I'm up and running the way I want to be.
Hope this thread helps anyone else who has these file sharing / permissions issues with Leopard. Especially for anyone wanting to do such a simple file sharing set up between 2 computers. I wish I understood exactly which tweak fixed the problem, but at least it works the way I want now.
So happy to be done w/this one!
Thx everyone. Any additional input on what solved it is welcome, so my curiosity is quelled...
TC

Failed to Configured Domain Services for Windows

Hi!
I am installing OES 2 SP3 with DSfW Pattern as a "New Domain Controller in an Existing Domain Services for Windows Domain" with Replication Configuration and Schema Partition.
During the "Perform eDirectory Configuration" at last task "Configure Domain Services for Windows " at 93% we encountered an error: "Failed to configure Domain Services for Windows".
Here's details of error ;
command : perl /opt/novell/xad/sbin/ndsdcinit.pl retry full-replica -d 'vec.apd.com.ph' -l 'ou=OESSystemObjects,dc=vec,dc=apd,dc=com,dc=ph'
-g 'ou=OESSystemObjects,dc=vec,dc=apd,dc=com,dc=ph' -f 'apd.com.ph' -p 'apd.com.ph' -o 192.168.81.92 -t
Could not create gss directory /etc/opt/novell/xad/gss at /opt/novell/xad/sbin/ndsdcinit.pl line 463, line 652
LDAP Based utility [ndsConfigServerContext.sh] to retrieve server context for YaST
DomainName : vec.apd.com.ph
NdsAdminName : CN=Administrator,CN=Users,DC=vec,DC=apd,DC=com,DC= ph
ExistingServerIP : ANDROMEDA.vec.apd.com.ph
ExistingServerPort : 0
Add_DC : true
Returning server context->ou=OESSystemObjects.dc=vec.dc=apd.dc=com.dc=ph
LDAP Based utility [ndsConfigServerContext.sh] to retrieve server context for YaST
DomainName : vec.apd.com.ph
NdsAdminName : CN=Administrator,CN=Users,DC=vec,DC=apd,DC=com,DC= ph
ExistingServerIP : ANDROMEDA.vec.apd.com.ph
ExistingServerPort : 0
Add_DC : true
Returning server context->ou=OESSystemObjects.dc=vec.dc=apd.dc=com.dc=ph
SASL/GSS-SPNEGO authentication started
SASL SSF: 56
SASL installing layers
Failed to fetch dNIPDNSZones from DNS_LOCATOR_OBJECT at /opt/novell/xad/lib64/perl/Install/adc_install.pm line 503
at /opt/novell/xad/lib64/perl/Logger.pm line 119
Logger::_err('Failed to fetch dNIPDNSZones from DNS_LOCATOR_OBJECT at /opt/...') called at /opt/novell/xad/lib64/perl/Logger.pm line 202
Logger::Log(0, 'Failed to fetch dNIPDNSZones from DNS_LOCATOR_OBJECT at /opt/...') at /opt/novell/xad/lib64/perl/Install/adc_install.pm line 532
adc_install::decide_domain_zones() called at /opt/novell/xad/lib64/perl/install/adc_install.pm line 150
adc_install::stage_domain('adc_install=HASH (0X8b9370)') called at /opt/novell/xad/sbin/ndsdcinit.pl line 1383
main::main(62, 'apd.com.ph', 'vvec.apd.com.ph', 'TRUE','ou=OESSystemObjects,dc=vec,dc=apd,dc=com,d c=ph','ADM_PASSWD_DOMAIN','ou=OESSystemObjects,dc= vec,dc=apd,dc=com,dc=ph','replops::DESTROY',
'APD.COM.PH',...) called at /opt/novell/xad/sbin/ndsdcinit.pl line 1301
main::main() called at /opt/novell/xad/sbin/ndsdcinit.pl line 1425
ENV PATH = /opt/novell/xad/sbin:/opt/novell/xad/bin:/opt/novell/xad/share/dcinit:/opt/novell/eDirectory/bin:
LIB=lib64
LD LIBRARY PATH =
/opt/novell/xad/lib64:/opt/novell/xad/lib64/nds-
modules:/opt/novell/eDirectory/lib64:/opt/novell/eDirectory/lib64/nds-modules
SASL PATH = /opt/novell/xad/lib64/sasl2
DCINIT CONFIG: /etc/opt/novell/xad/xad.ini
DOMAIN NAME: vec.apd.com.ph
PARENT NAME: apd.com.ph
FOREST NAME: apd.com.ph
NETBIOS NAME: VEC
Any ideas on this error ?
Regards. Thanks.
denzmo

Thanks for the reply.
I have some followup questions
2. Can you explain the DNS setting in your setup ?
Tree ---> Power--> apd.com.ph -- dlpc.apd.com.ph
-- vec.apd.com.ph -- Andromeda.vec.apd.com.ph (DNS)
-- Pictor.vec.apd.com.ph ( additional domain server ) -> "Failed to configure in DSFW"
1. apd.com.ph, dlpc.apd.com.ph, vec.apd.com.ph are DSfW domains or just DNS domains ?
2. Andromeda.vec.apd.com.ph (DNS) - is this the DC of a DSfW domain ?
3. You are adding the Additional domain controller to the vec.apd.com.ph domain right ?
The
# LDAPCONF=/etc/opt/novell/xad/openldap/ldap.conf /usr/bin/ldapsearch -Y EXTERNAL -s sub -b dc=ph "(objectclass=dniplocator)" dn
Heres the result ;
a.) running the command in the DNS server (child domain) ANDROMEDA;
SASL /EXTERNAL authentication started
SASL username: gidNumber=0+uidNumber=0, cn=peercred,cn=external,cn=auth
SASL SSF: 0
# extended LDIF
# LDAPv3
# base <dc=ph(objectclass=dniplocator) [email protected]> with scope subtree
# filter: (objectclass=*)
# requesting:ALL
# search result
search : 2
result : 32 No such object
text : NDS error : no such entry (-601)
# numResponses :1
This is strange. This ldapsearch is failing to find the locator object in the tree under dc=ph.
- Can you try this same command from your FRD DC too and find the result ?
- Is your server non-name mapped or your adding a DSfW server into an existing eDirectory tree (name mapped) ?
- If it is later can you try the same search with '-b' parameter replaced with container to which FRD is mapped to into the eDirectory Tree.
- Can you tell in your setup where are the locator object present for your first DSfW server which is acting as DNS server ?
- While installing this ADC server, you have given the remote dns server as 192.168.81.92. In the YaST DNS screen did you do retrieve (by clicking 'retrieve' button on the screen ) or you entered those inputs manually ?
- Another follow up question. The locator context provided to the ndsdcinit command in your first post, is 'ou=OESSystemObjects,dc=vec,dc=apd,dc=com,dc=ph'. Can you confirm your locator
context is correct ?
[/QUOTE]
b.) running the command in the ADC PICTOR;
SASL /EXTERNAL authentication started
ldap_sasl_interactive_bind_s: invalid credentials (49)
[/QUOTE]
This is expected as the server is not completely configured.
Please get it touch with our NTS for passing on more information about this setup.

I have an iMac OS X Version 10.5.8 but I also have a MacBookPro 10.7.5 version, why software updates are not the same? For example, when I want to know how much memory can not store in the same way in either computer.

I have an iMac OS X Version 10.5.8 but I also have a MacBookPro 10.7.5 version, why software updates are not the same? For example, the way to see how much memory I have in my iMac is diferent than MacBookPro. And where I can see the memory of the disc I've got in my iMac? Than you very much.

If you want everything the same on both computers you need to be running the same OS X version. You can't because your iMac is a PPC machine, not Intel.
But to see information about your hard drive is the same for both. Simply select the drive icon on the Desktop. Press COMMAND-I to open the Get Info window. Disk information is in the upper panel.

HT6114 My iMac seems to have frozen during the update- how long should I expect the update to take? The 'installing software update' bar is still showing itself working but has been stuck in the same position for over an hour.

My iMac seems to have frozen during the update- how long should I expect the update to take? The 'installing software update' bar is still showing itself working but has been stuck in the same position for over an hour. Any thoughts?

Update2: There is something very wrong with wireless on mountain lion recovery. I don't know what the problem is, but this link may explain:
http://osxdaily.com/2012/08/10/os-x-mountain-lion-10-8-1-beta-released-for-dev-t esting-may-include-wi-fi-fix/
Wireless recovery would start out with over 25 hours estimated and kept on failing. It turns out to be a two step process of downloading a few Mbytes then a 4Gbyte .dmg file, but I couldn't even download the Mbyte file. I bought the thunderbolt to gigabit ethernet adapter, plugged it in, restarted recovery and download of a little more than 4Gbytes took less than an hour. My limiting factor was probably comcast home internet rate of 12Mbps. The wi-fi wireless connection should be able to do over 100Mbps, so wireless shouldn't be much slower than wired, except wi-fi wireless is broken. Now that ML is installed and updated, wi-fi seems fine now, as I am using it right now, but I haven't tried downloading a big file yet.
Don't use wi-fi wireless for Mountain Lion recovery.

My thumbnails have all disappeared. If I view events there is the same one for all 270 events and if I open an event I have clack thumbnails. I can only see the photo if I open it individually.

If I view events there is the same thumbnail for all 270 events and if I open an event I have black thumbnails. I can only see the photo if I open it individually.The only way I can then see the thumbnail is by editing each photo. Then to even further complicate matters the last editted phot is replaces as the thumbnail on all events foders!...grrr. This is what I awoke to two mornings ago after inly backing up my machine which I do every night.

No. Quitefrankly I didn't know I could even use iPhoto on iPad, I just have the photos app that came on it. This is on my laptop. I don't particularly like iPhoto I use it essentially to take photos off my camera and store all the originals. I use Photoshop. To work on them and store them in Dropbox (don't get me started on iCloud!). As I said this is a problem that seemed to crop up overnight after backing up to my external HD.

How do I change the icloud account on my iphone? I want to use the same account for all my apple devices (macbook air and imac and iphone). I can't see where I can amend the iphone account because it is in grey?

I want to use the same account for all my apple devices (macbook air, imac and iphone). I can't see how I can amend the iphone account because it is in grey? I also can't remember the password for this account so i can't even delete it and start again?
Help!
Thanks

Deleting an iCloud account only deletes it from the Device, not from iCloud. In iOS 8, the name of this setting changed to "Sign Out" as that is a better reflection of what actually happens. Your iCloud data remains on the server, available to devices still signed into the account, but the device you sign out of the account on is disconnected from the account, and as a result, the iCloud data from that account is removed from the device. It will redownload to the device should you sign back into the account.
The only issue you'll run into when you switch between accounts is with my photo stream photos older than 30 days. When you delete (or sign out of) and account, your photo stream photos are deleted along with the other data from the account in question. However, unlike other data which remains on the server and can redownload to your device when you sign back in, my photo stream photos only remain in iCloud for 30 days. When you sign back in, you will only get back my photo stream photos added in the last 30 days (as older photos are no longer in iCloud to redownload). Like other account data, any my photo stream photos on your other devices signed into the account are unaffected by this. If you want to keep older my photo stream photos on your device as you change iCloud accounts, save them to your camera roll before deleting (signing out of) the account.

3 identical machines (Aspire R3700) Fail at the same spot for Windows 10 Upgrade

Similar Messages

Maybe you are looking for