3 important question and advice to Nokia center fo...

In 5800 : 1- How can we capture multiple images with interval time ?
2- How can we connect 5800 in to adhoc to laptop internet ?
3- can we have more than 4 shortcut on screen?
These are important and usefull if nokia update them in future Updates.

fsalami wrote:
In 5800 : 1- How can we capture multiple images with interval time ?
2- How can we connect 5800 in to adhoc to laptop internet ?
3- can we have more than 4 shortcut on screen?
These are important and usefull if nokia update them in future Updates.
1, Sequence mode. Its there in v21, not entirely sure if it was visible before or not.
2. Not tried this yet.
3. Nope..

Similar Messages

Audigy platinum ex questions and advice - dual ouput or dual card - motherboard audio op has died

Hi all.
im new to the forums and would like some advice please.
i use my pc for mixing music and DJ'ing, but the problem that i have is that the onboard sound output has died. i need 2 intendant / separate sound outputs, one for preview, and one for main/live output.
Now, is it possible to configure a audigy platinum ex to provide the required outputs, and if so, how.
if this is not possible, can i use a soundblaster live card in the same pc to provide the required outputs, or as i suspect the answer is no to this due to shared file names within the drivers and such, is there a recommended card that i can use in conjunction with the audigy, or will any generic sound card do the job (for preview output).
i dont want to replace the motherboard and reinstall all the software at the moment, and i use mixmiester, fruityloops, reason and such for mixing/creating, and either mixmiester, tracktor, or pcdj fx for dj'ing.
many thanks in advance for your help and advice.
Adrian

mikiem ........... your a STAR.......
i didnt know that you could do that.....using the AISO driver allows access to all sorts of outputs..........when i have time im going to have to see what they all do, and what else is available, but the biggest thing is that it has sorted out some of my immediate problems......
i will need to go through all the software to see if i can get access to these outputs from it all, but it definitely works with mixmiester, so i dont need to re plot all the files.
just so that people know, i set the audigy speaker config to 4.0/4.1 in THX setup, and then looked in the advanced audio output section of mixmiester (under output config) and presto....2 independent audio outputs.
dont suppose that anyone knows where to get a complete and detailed manual for what all the software and hardware does and how to configure it all........
HUGE thanks mikiem........

Mac mini questions and advice.

i'd like to eventually purchase a mac mini, but is the apple care protection plan worth it??? sorry multiple questions will a fully loaded mac mini 160 gb hard drive and 2 gigs of ram be an improvement over my current set up... pentium 4, 1.60 GHz.... 1.59 GHz, 512 mb of ram... 70.2gb hard drive
one more question, will there be any trouble hooking up the mac mini to my 32 inch sony lcd.
sorry for all the questions, would appreciate any advice and feedback.

Can you give us the model number of your 32 inch Sony lcd? The Mini supports resolutions up to 1920x1200. We need to find out what kind of beast your 32 inch Sony is; it sounds kinda big for a regular monitor -- more like a TV display.
Hard to say if the Mini will be an improvement over your PC, unless we know what programs you want to run. It would obviously be an improvement in term of security; you won't be worrying about keeping virus definitions up-to-date every week.
I use a KVM switch to run my Mini and a PC with an IBM keyboard and a Dell LCD monitor. I had to experiment with several models of KVM to find one I liked.
I also use Parallels to run Windows and Linux directly on my Mini at the same time I run Mac OS. Useful for work-flows that require Mac and WinXP/Linux programs simultaneously.
You can buy and register AppleCare anytime during your first year of ownership. AppleCare gives you access to phone support, which might be useful to a first-time Mac user. You can buy AppleCare for less from some on-line retailers -- for example google for lacomputercompany. Be sure you buy the correct AppleCare for your Mac.
Wireless generally works fine, though some non-apple wifi routers with old firmware have issues. In instances of range or compatibility problems, often a wireless ethernet bridge can solve the problem. These are inexpensive and involve no software, since they plug into the mini's ethernet port.
If you are doing massive one-time file transfers, I'd strongly recommend connecting your Mini directly via ethernet cable to your router. This will save time and eliminate several possible sources of trouble. Save the wifi for your web interactions after you transfer the bulk of files from your PC.
Regarding pictures and music ... if they are in standard formats like mp3 and jpg, then iTunes and iPhoto should be able to import them just fine. If the music is protected by Microsoft's "plays-for-sure" digital rights management scheme, you may be out of luck. If your music is already in iTunes for Windows, also no problem.
Although you didn't ask, at some point you may need external storage for your Mini. Be sure to get an external drive that supports Firewire. This is preferable to drives that just support USB, though you can get models that support both. Firewire will be significantly faster and more reliable with your Mac.

Setup question and advice for Lightroom 4.1

Hi,
I'm upgrading from LR 3.6 to LR 4.1 on my Windows 7 laptop with 8 gigs ram. I need to free up space on my internal hard drive, so I'm moving my images to a 1T external hard drive, connected via usb 2.0 unfortunately.
question 1: Does it matter in what order I do the above? In other words, should I do the upgrade to 4.1 first and then move my images/catalogue to the external hard drive or should I move my images and then upgrade?
I've heard talk about how LR 4.1 is slower than LR 3.6, so I'm, a little worried about performance.
quesiton 2: Does anyone have an specific advice about configuring LR for best performance considering my files will be stored on external hd via USB 2?
(I only use this computer for web surfing and imaging programs. Besides LR, I also run Camera Raw, PS CS 5, and Premiere Elements. I was thinking about making two catalogues- still images which I would move to the ext hd and movie clips which I would keep on the internal hd. Does that make sense? )
thanks in advance,
D

ziggycat4 wrote:
Hi,
I'm upgrading from LR 3.6 to LR 4.1 on my Windows 7 laptop with 8 gigs ram. I need to free up space on my internal hard drive, so I'm moving my images to a 1T external hard drive, connected via usb 2.0 unfortunately.
question 1: Does it matter in what order I do the above? In other words, should I do the upgrade to 4.1 first and then move my images/catalogue to the external hard drive or should I move my images and then upgrade?
Doesn't matter, as long as you do it properly
I've heard talk about how LR 4.1 is slower than LR 3.6, so I'm, a little worried about performance.
quesiton 2: Does anyone have an specific advice about configuring LR for best performance considering my files will be stored on external hd via USB 2?
It is slower for some people, and not slower for other people. I don't think anyone in these forums has figured out what the reason is for slowness on some computers. The only thing you can do is try it on your computer. By the way, as far as I have read, the performance problems in Lightroom are not related to USB 2.
(I only use this computer for web surfing and imaging programs. Besides LR, I also run Camera Raw, PS CS 5, and Premiere Elements. I was thinking about making two catalogues- still images which I would move to the ext hd and movie clips which I would keep on the internal hd. Does that make sense? )
Nope, multiple catalogs doesn't make sense to me. You are just reducing your efficiency by having multiple catalogs here. One catalog is easier, that way you never have to switch back and forth, you never wind up importing into the wrong catalog, you can search across all your photos and videos, etc. One catalog is the way to go.
By the way, did I mention that one catalog is the right way to go? Because if I didn't mention it, let me state that one catalog is the way to go.

File import questions and folder display questions

I am running LR3 on Win 7 x64. I have a few questions.
I have a hard drive assigned to drive letter "B:\" Why doesn't the file imported see this drive in the list of drives? I have to use the "other drives" and browse every time that I want to add files from this disk. Other drives, including networked drives are fine.
When importing from a main folder and including subfolders, is there a way to filter files in any manner? I never want to import web galleries that I have made in bridge, for example. These files have very small JPG files, thumbnails and web images. Is there a way to exclude them form consideration whilst importing? Is there a way to reveal and show the thumbnails with the folder structure? I don't want to have to browse to every folder individually when I am trying to import all useful images from an entire disk. If LR would at least show the folder structure of the subfolders when you select photos from a top level folder, this would help. How can I do this?
In the library view of folders, how I filter on all files in one disk? I can select a folder under the disk and see just that folder, but LR will not allow me to select the entire disk. Is there a way to do this?
How can I display the entire folder structure in the laibrary panel? Some folders are not showing their top level folders that they are inside of. How do I reveal this information?
In the library module, how can I filter on file dimensions? I thought that I had seen this, but I can no longer find this. Sorting by file dimensions would also be an option to accomplish what I am trying to do. I need to delete all thumbnail images and tiny images from the catalog. Is there an easy way to do this?

No, because you don't import a whole disk, you only import images. And the toplevel disk bar you see there is the disk where the top level folder is stored, not the entire disk.
Let me make this clear. When I want to view an entire disk, I am only wanting to select images that I have already imported, not the entire disk including images that I have NOT imported.
I am not sure if you dont understand what I am saying or what. If you have folders of images inside a top level folder, you can easily select the top folder to see all subfolders that you have imported. Why can't I select the disk as the top level folder to see all of the images that I have imported on that disk?
I have a cattelog that has images from 8 different disks. I use removable drive bays so all 8 disks are not available at any given time. I just want the ability to select all images that I have imported on a disk, just like you can do at the folder level. I am at a loss as to why this is a problem.
My point about bridge was that LR is a far superior program for organizing images due to its database. But LR is lacking in some features that could have easily been put into it. If bridge can do the type of filtering that it does without a good database engine, then certainly LR could and should do it. In no way do I want to use Bridge to manage cattelogs with 150,000 images. That would be insane. I have no issue with the fact that you have to import your images first to use LR. It has to be this way to work with the database. My issue is that the filtering is not nearly as comprehensive as bridge.
I dont need help with my workflow. Back when I shot many of the images that I am importing now into LR, there was no lightroom. My workflow was much different back then than it is now. My comments were that I assumed that LR could do things that it cannot, not that I needed help with my current workflow. Much of the issues that I have now with LR are due to the old workflow and trying to import only the raw images.

Rant, and advice to nokia

1. in general, all nokia suite is big, bloated and a resource hug. even if the device is rarely or seldom connected to the pc, meanwhile it takes like 100 megs in memory and to a certain degree uses cpu, even if it is doing nothing at all, or if rarely does something, since the device does not stay connected or the suite in use. Even though (as i believe), the idea was that there was going to be only one suite for all models, this is not the case, and some utilities change form model to model. there is an e90 and a n85 in my house, for different people, both with different apps (not all) which means every device bloats more the pc usage, even if it is not doing nothing at all at the time
2. nokia plans to release some models (like n8) to try to stand up on their own again (ie: cathc up with iphone, which may be lousy but sells more and has higher profit margin). some pointers on that account:
if the device has been already tested, proved and all, and the final deign and production process has been set from a long time, why wait so long to release in the market just for market reasons? the same thing did the now extint 3d video cards '3dfx' (which made the now legendary voodoo cards, and is now part of envidia). they had the products already designed and stuff, but did not release them but keep announcing their cualities and specifications for when thye should be relased, meanwhile other companies keep producing things with similar or higher features and released them before the announced release date of the 3dfx products. kinda stupid if you ask me
on the same note: a lot of product, each with one special characteristic. how about fewer products and integrate all those novelties to those products?
also, it is not to make an iphone killer so lets make an iphone clon, just like every other single model out there in the last 3 years. iphone, even being a lousy device, was made popular because it offered something that no other had at that moment (being able to move pictures with the finger, which is something you can do in public without having an excuse, like 'yea i am going to manage the inventory at my factory with the apps in my ohone soplets take out the phopne and do some stuff so the other people around me can see me with my new phone'. movin pictures with the finger over a screen does not require an excuse). you should offer something that no other has (not just hardware, but user experience, but based on novelty hardware)
since now all phones are iphone clones, it is not only to put a touch screen on a flat phone, you also have to differentiate in your designs. thumbs up on the n8, which is in the right direction on that account. yes it is hard to think about something that differentiates a big touch screen from another on the visual aspect, but being a multimillion company that should not be an excuse (specially if you want to keep being a multimillion company)

Hi, Have a problem connecting my nokia n8 to nokia pc suit. My collegue has done it sucssesfully with his. PC suit is better for me, as using that for work. Cant manage loads of things (like calendar entries, txt..) the way i need with OVI. Have a samsung n210. Is there any softwere you could recommended to solve this problem?
Thank you for the help.
Regards,
Ollie
Moderator's Note:
Personal details removed by a moderator. We kindly ask you not to share your personal contact details or your phone's IMEI number publicly on this forum. This is for your personal safety and privacy.

Bundle export/import questions and work arounds

Hello,
I've begun to use bundles to migrate components from our test server to our production server. Bundles are a great feature which i missed the last time i worked with N1SPS a few years back. But i've found a few things that i had to work around.
1. It would be very nice to be able to set version to something like "latest" in the bundle, so i always get the latest version of all components when i do an export.
2. The bundle should be able to export in a certain order, first folder then components, then containers and lastly plans. Today i have to add everything to the bundle in this order or change the XML-file in the jar afterwards. A function to change the order in the bundle would also help.
3. Then the bundle is imported the container reefers to components of version 1.1 for some reason (in this case a directory), but it will import that component to version 1.0? I had to change the version reference in the XML to get this to work.
Any workaround or is it all RFE:s and bugfixes?
Regards
Henrik

Thank you for your fast reply. Is (1) something that could be object for a RFE? I think it's a common work flow to export the latest versions from a development server to a production server.
Regards
Henrik

A few questions and advice

Recently I swapped out my ADSL router modem for another, this caused all sorts of hassle so I put the old one back in. Since then I am having significant issues. Mostly with wireless.
As I had not changed the airport extreme (n) I do not know why the wireless became an issue. Basically my laptop connects to the network fine with full strength but web access and local network access is variable, between normal and dead slow. I am at a loss to explain it.
Another thing is that my ADLS modem is a draytek. And I currently have it set to DHCP and the airport to passthrough as this was what I was advised. Yet to my mind the airport extreme should take on the task of dishing out addresses as its got most things connected to it! Or put another way the draytek has one ethernet lead to the wan on the airport then from the airport my computers and a switch are connected.
Would it make more sense to allow the airport to dish out IPs, does it make any difference?
Any suggestions on what could have gone wrong on the wireless side would be most appreciated. For instance I was using Teleport just fine with it prior to the issue now Teleport has terrible troubles with frequent drop outs or losing control once its on the other mac leaving me with no mouse anywhere!
One other thing are there any tools I can use to diagnose issues on the network beyond looking forlornly at the wireless bar showing full strength.

um, no that does not seem to have fixed it after waking the macbook from sleep the speeds are rubbish again.
If anyone is reading would an archieve install on the macbook be worth considering. Wireless from the imac seems fine. I think someting has gone pear shaped on the macbook,

HT5312 I forgot my security question and my rescue email are the same as Apple ID so cannot reset my security question. Any advice on how to reset m security or add a rescue email ? Thanks

I forgot my security question and my rescue email are the same as Apple ID so cannot reset my security question. Any advice on how to reset m security or add a rescue email ? Thanks

If you don't have a rescue email address then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

I have an urgent question about my indesign. I had problems with the creative cloude app and then uninstalled it and then installed it again. Now it is not opening and I cannot download it again either. Pls give me help and advice if there is anything I c

I have an urgent question about my indesign. I had problems with the creative cloude app and then uninstalled it and then installed it again. Now it is not opening and I cannot download it again either. Pls give me help and advice if there is anything I can do to repair it

Please authorize ADE 3 with same credentials that you used with older version of ADE

Hi sorry but i have an important question?i have an iphone 4 and i want connect his to i tunes in a second pc because the pc i connect before is broke..how can i do?without lost my photo number or music?

hi sorry but i have an important question?i have an iphone 4 and i want connect his to i tunes in a second pc because the pc i connect before is broke..how can i do?without lost my photo number or music?

check out this post by Zevoneer.

HT4972 hi one of the main important questions which this site didnt answer to it is: whats the latest version of ios which any device work with it for example i have a ipad 1st and i dont know whats is the latest version of ios for this device thanks

hi one of the main important questions which this site didnt answer to it is: whats the latest version of ios which any device work with it. for example i have a ipad 1st and i dont know whats is the latest version of ios for this device

Google "iOS versions" and read the first match (Wikipedia)........

HT201302 Using a windows 8 at question 5 at "right click logo" there is no option of "import pictures and videos" HELP!!!!!!

I'm using a windows 8 and an Iphone 5 and am trying to download photos from my phone to my computer. I found the link http://support.apple.com/kb/HT4083 from another question but when I get to question 5 where it says "right click logo" it's an unidentified logo that says iphone and even when I right click it there is no option of "import photos and videos". HELP!!!!! been working on this for weeks and cannot acomplish a thing. help please!!!

Alright, if you go to computer and right click on the iPhone, import is not an option? If you go to Control Panel and go to AutoPlay, can you change the settings for the phone? It should recognize it as a digital camera. Also, if the iPhone has a passcode and is locked when you connect it, you will not be able to import the photos either. If it has a passcode, unlock it, then connect to the computer and see if you can see the choice to import then.

Questions about Using APIs to import Bills and Routings - AND COSTS

Hi Forum - the following is a back-and-forth with a customer about use of APIs - Inventory developer suggested I post the question here. Note the 2nd question - and thanks for any assistance.
SR# 7332152.994 ALCOA
Instructions given to ct:
Q1 - Can I load the bill header and components at the same time?
You should be able to load the bill header and components at the same time. Customer loads bill and component data inserting enough "other" data for each so that the bill sequence id will be derived. For the component record, the assembly item, org and alternate_bom_designator values will be used by BMCOIN to derive the bill_sequence_id.
Example:
INSERT INTO BOM_BILL_OF_MTLS_INTERFACE
ORGANIZATION_CODE,
ITEM_NUMBER,
ALTERNATE_BOM_DESIGNATOR,
PROCESS_FLAG,
TRANSACTION_TYPE
VALUES
'M1',
'&PARENT_ITEM',
NULL,
'1',
'CREATE'
INSERT INTO BOM_INVENTORY_COMPS_INTERFACE b
ORGANIZATION_CODE,
ASSEMBLY_ITEM_NUMBER,
ALTERNATE_BOM_DESIGNATOR,
COMPONENT_ITEM_NUMBER,
OPERATION_SEQ_NUM,
COMPONENT_QUANTITY,
EFFECTIVITY_DATE,
PROCESS_FLAG,
TRANSACTION_TYPE
VALUES
'M1',
'&PARENT_ITEM',
NULL,
'&COMPONENT_ITEM',
1,
1,
trunc(SYSDATE),
1,
'CREATE'
Hi Aruna, some additional information that may be useful:
We can load/create the bill header and components at the same time using the scripts given (as above)
Required Data for Creating a Routing : assembly_item_id,
organization_id, routing_type, transaction_type, process_flag
And following scripts can be used to load routing header and operations equences.
INSERT INTO BOM_OP_ROUTINGS_INTERFACE
(assembly_item_id,
organization_id,
routing_type,
transaction_type,
process_flag)
VALUES (2255800,207,1,'Create',1);
INSERT INTO BOM_OP_SEQUENCES_INTERFACE
(assembly_item_id,
organization_id,
operation_seq_num,
Department_code,
effectivity_date,
transaction_type,
process_flag,
operation_description)
VALUES
(2255800,207,100,'ASSEMBLY',
to_date('24-FEB-2009'),'Create',1,
'Paint Wagon');
Q2: One more question, can an expense item can be added to the bill and can contribute the cost.
As there is a confusion of what I asked, below I am rephrasing my question
By an Expense Inventory Item, I mean an item that is just tracked for quantity only i.e.,Checking the attributes - Inventory Item, Stockable, Transactable under Inventory Tab and not checking the attribute - 'Inventory Asset Value'.
My question here is, For these Expense Inventory Items, What is the difference between having the 'Costing enabled' attribute turned ON as opposed to having it UNCHECKED
*Q3 I have tried to load the items and I could only load 1st level of components but could not load second level of bom at the same time.
While inserting I have inserted plan level too.
Please let me know if I have to do anything different to load second level.*
Thanks
James

You may want to look at using the more4apps bill of materials wizard, an excel based solution for uploading assemblies and their components.

HT201407 i forget security question and i need it very important

i forget security question and i need it very important

You need to ask Apple to reset your security questions; this can be done by clicking here and picking a method, or if your country isn't listed, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(110402)

3 important question and advice to Nokia center fo...

Similar Messages

Maybe you are looking for