3 keys still won't work after getting wet

I still have 3 keys that do not work the caps lock, left apple key, and tab. When you purchase a new keyboard it is just the key caps correct? Or would a new keyboard fix my problem.

Hello Murrs438,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning iMessage issues:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Learn how to resolve issues with the Messages app on your iPhone, iPad, or iPod touch. You'll learn what you need to send messages using SMS, MMS, and iMessage as well as how to resolve issues with each method.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Similar Messages

  • Efax 7510 still won't work after turning off/on ePrint several times

    I'm trying to send an eFax over and over after turning off and on the ePrint button under the webservices menu but without any success. The message keeps stating that it's not connected to a network. I am 100% sure that it is connected to my wireless network because I check that out and print a copy of the page stating that this printer is connected.
    What could the problem be? Please help!

    Hi daisyforu,
    Welcome to the HP Support forums.  I understand that you are getting an error message about not being connected when you try to enable the web services for your Photosmart 7510.
    The error message you are receiving is indicating that the printer doesn't have an independent connection the internet.  Please set a static ip address and manual DNS servers by following the steps below.
    1)       Please enter the ip address of the printer into the address bar of your browser (Internet Explorer, Chrome, Firefox, or Safari, etc). My screen shots below are from Safari but the location of everything is the same regardless of the browser.  This will bring up the embedded web server of the printer.
    2)      Please click on the network tab.  You should see the Network Summary for your printer. Please click on 'Networking' on the left hand side menu.
    3)      Please click on 'Network Address (IP)' on the left hand side menu.
    4)      Please on the radial button beside "Manual IP" then click on "Suggest a Manual IP Address" button. The Manual IP address, Manual Subnet Mask and Manual Default Gateway should populate for you.  Please click on radial button beside "Manual DNS Server".  For the Manual Preferred DNS Server please enter 8.8.8.8 and for the Manual Alternate DNS Server please enter 8.8.4.4.
    5)      Please click on 'Apply'.  If you get a warning message about changing the ip address please click 'OK'.
    6)      Please turn the printer off by the printer's power button.  Please wait a minimum of 15 seconds and then turn the printer back on.
    7)      Please press the ePrint icon in the upper left hand corner of the printer's front panel. This should prompt you to accept the terms of service.  Please choose 'Accept'.
    8)      When prompted about the automatic updates please choose 'Yes'. The printer should now show the HP logo while the printer communicates with the HP servers. The Web Services information sheet should print with the claim code for your printer.
    Now that you have the ePrint feature is turned on before using the Fax feature I would recommend that you customize your ePrint email address.  I have included a document here on how to do that.
    You should now be able to get your eFax setup.  I have included a document for you on how to do this here.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • The back button won't activate till the second change. I have uninstalled and removed all directories for firefox still won't work after reintall

    I have firefox 3.6 installed and have been using it for years. All the sudden last week the back button wouldn't work till I go to the second web address change. For example if I start at forums.sagetv.com and select a post I can't hit the back button till I select another article. I have uninstalled firefox deleted all the directories, rebooted and reinstalled the problem still comes back.

    I started having this EXACT same issue a few day ago. I found out that it was the McAfee site advisor causing the problem. Click the Tools drop-down and select add-ons. In the add-ons window, click the Extensions panel. Select McAfee and disable it.
    Hope this helps, Arielle!

  • Internet won't work after getting a new modem

    Am living in Malaysia with my MAC OS X (version 10.68).  Our provider just replaced our modem because we had internet access issues.  This solved the problem for about a day and now we can't access the internet.  It seems that the network configuration has changed and although we enter the new password assigned we are we can't access.
    We have tried 'restarting the device', as was suggested.  We restarted the modem, then later tried, resetting the router, doing both of those at the same time, and eventually restarting the computer.
    Any suggestions?

    What kind of modem is it (DSL, Cable, or what?).  Does it connect directly to the computer or to a router?  Does the modem have a built in router? wifi?  Take a moment and write up a few details about your home network.

  • IPod Touch sreen stops working after getting wet. After, work again normally for two weeks. Now, sometimes work, sometimes don't. Any clues?

    My iPod took a bit of rain when i'm cooming home. After that, the touch stops responding. I tried restart and everything, but I only get to destroy the iOS. After, I put the iPod under the notebook in order to try to dry him with the heat. The touch work again! I restored the iOS and everything goes fine for two weeks. Yesterday, I plug the iPod for use the iTunes and he wasn't recognized by the iTunes, and the touch stops working again. I restored again the iTunes start to recognize him, but the touch works for a little bit and stop again. I put it under the note and the touch works for time enough for me to turn off the iPod. Anybody has any ideia what is going on? Thanks.
    PS.: Sorry about my terrible english. Is not my mother langage.

    Malarauco wrote:
    Thanks guys, I shut the thing off and left in a bowl with uncooked rice, in found several tips on the net saying that this might help absorve the wet, also this don't seem capable of creating damage to me. I think I will left the iPod in the bowl for three days before turning it on again, that seems ok?
    7 to 10 days is better, and the failure rate is very high, you may need a new iPod.

  • I updated addon compatibily program but it still won't work. Shockwave is crashing when I play on line. never did before

    Shockwave is freezing up on me when I play on line.
    I tried upgrading with your compatabily but still won't work
    cannot get the program to stay on.
    help?

    Shockwave is freezing up on me when I play on line.
    I tried upgrading with your compatabily but still won't work
    cannot get the program to stay on.
    help?

  • Hi my iMac has decided to come up for the 5 time Work the ?  Symbol just tris time everytime i try to restart the iMac with any key it won't work, then I try also i knserted the installation dvd and it does not, If media is getting scratched in the drive

    Hi my iMac has decided to come up for the 5 time With the ?question mark   Symbol just this time when i try to restart the iMac with any key it won't work, then I try also to insert the installation dvd and stard with yhe C or D key
    Still no way to grt it starting, also I notice the DVD drive is getting scratched in the drive just before it outomaticly ejected.
    media is getting scratched after been used and ejected by my iMac without loading .
    Please help!!! I  to finish my college work and have no way of  work on it! HELP
    Thanks

    Boot off your *original* Install Disk while holding down the *d key*, (not c key), then run the extended Apple Hardware Test. Some disks require you to use the Option key at bootup to select AHT. Some models have a separate AHT CD. Some have it on the Disc #2.
    The Memory test can really only be trusted if it finds a problem, not if it doesn't find a problem.
    Memtest OS X...
    http://www.memtestosx.org/joomla/index.php
    Rember is a freeware GUI for the memtest ...
    http://tech.kateva.org/2005/10/rember-freeware-memory-test-utility.html

  • I'm having all kinds of problems since loading Lion and I really wish I hadn't bought it yet. Even after the software update today, 1. my modem still won't work, 2. Photoshop Elements produces muddy photo prints, etc.  Anybody at Apple listening?

    I'm having all kinds of problems since loading Lion and I really wish I hadn't bought it yet. Even after the software update today, 1. my modem still won't work, 2. Photoshop Elements produces muddy photo prints, 3. View preferences in windows don't hold,  etc.  Anybody at Apple listening?  Anybody else out there having these kinds of problems?

    10.7 was horrible unstable so I waited until 10.7.1 and tried it again. Well I have to say that it is still a defective OS. I am reverting to Snow as we speak from my carbon clone copy.. This is really the worst OSX I have ever used. It gives me random Kernel panics for no reasons, unstable airport and hundreds of small issues that are just not necessary. For instance I can't use QuickTime in Lion to trim a videoclip ( the UI goes mad and the trimslider becomes inoperable and hangs the Player window ) while in Snow it is no problem. Itunes gives me crackling sound when the equalizer is turned on, Graphical glitches in Photoshop, games crashing, Preview.app not working with some pdfs, so I need Adobes reader which I never used before.. It is definately not ripe for mass usage. Might 10.7.2 or 10.7.3 fix it, but not yet.
    * and just for the records : the hardware is absoltely ok. Because in Snow it works as it should. ( So many Lion fanbois are talking : "your Ram is defect", defintely NOT. - Lion is defect! ).
    Shame on you Apple.
    Message was edited by: Sjazbec

  • My iphone won't work after fatal error occurred installing iOS5.1 have followed allsteps to reconfigure software onto windows still no phone just a usb and itunes picture on screen

    my iphone won't work after fatal error occurred installing iOS5.1 have followed allsteps to reconfigure software onto windows still no phone just a usb and itunes picture on screen

    Connect the phone directly to the computer, not a hub.
    Disconnect all other USB devices except keyboard and mouse.
    Disable your firewall
    Disable your antivirus
    In iTunes if it recognizes the phone click "Restore"
    If it doesn't recognize the phone:
    Disconnect the phone from the phone end, leave the USB cable plugged into the computer
    Hold the HOME and SLEEP buttons until the screen turns black, excactly 10 seconds, then release the SLEEP but continue holding the HOME (If an Apple logo appears you have held SLEEP too long; do it over)
    While holding HOME connect the cable to the phone
    As soon as iTunes recognizes the phone release the HOME button and it should restore.
    If neither procedure works note the exact error message and post it.

  • So, I have created my home sharing from my base computer to my laptop. On my lap top I see the tab for home sharing but it will not let me connect to my computer to share my music over. I have done everything iTunes has told me to but it still won't work.

    So, I have created my home sharing from my base computer to my laptop. On my lap top I see the tab for home sharing but it will not let me connect to my computer to share my music over. I have done everything iTunes has told me to but it still won't work. Any help would make my day...

    I got some more info that may help.
    I put a cd on my laptop, and was able to share it to my computer... So the problem is only from my computer to my laptop. I tried the firewall thing and it did not help. I read the rest of the trouble shooting page, and nothing else applies. iTunes is an execption and already was. I can not think of anything else being my problem. Do you think I should re-install iTunes or would that be a waste of time? At this point I am about to just call Apple for some help because I am getting to stressed over this.
    Thanks

  • TS3212 when installing iTunes on my new laptop a message box appears saying some sort of error has occured and i have to uninstall it then reinstall it again and it still won't work what should i do?

    when installing iTunes on my new laptop a message box appears saying some sort of error has occured and i have to uninstall it then reinstall it again and it still won't work what should i do?

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • My ipod nano 5th gen  wont play movies or videos on my ipod but plays them on itunes when i click on it the screen flashes black i have tried taking the movie off my ipod and putting it back on but it still won't work what should i do?

    My ipod nano 5th gen. won't play movies or tv shows but it plays them on itunes.  When I click  on it the screen flashes black. I have tried taking the videos off my ipod and then putting them back on but it still won't work. what should i do?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • When I try to download the windows support software it is coming up with an error message saying I am not connected to the internet but having checked the network diagnostics several times I am definitely connected but it still won't work. Any ideas?

    When I try to download the windows support software it is coming up with an error message saying I am not connected to the internet but having checked the network diagnostics several times I am definitely connected but it still won't work. Any ideas?

    I get a problem like yours. I have a mac mini with 2 hdds the server and hd2 I installed windows 7 and the windows works fine. except it will not allow me to get on the net.  I get error 651.  I can boot back to lion and the internet connection works. I googled and error 651 does seem to show up.  I would like  a work around.

  • External keypad won't work after installing OS 7.

    External keypad won't work after installing OS 7. I have a "Zagg" keyboard that won't pair now to OS 7,...Why?

    They do work. I have one and mine is working. Have you tried to reset your iPad? HOlding down teh sleep and home keys until it reboots then try pairing again.
    A slightly more drastic thing is to go into the settings and reset all settings. THe downside, you will need to retweak your device but it can help fix keyboard glitches.

  • Printer won't work after installing mountain lion?

    printer won't work after installing mountain lion?

    Assuming you've first checked Software Update to see if there are any updated drivers and it's still not working, you could try resetting the printing system.
    System Preferences>Print & Scan, Control+Click or Right Click on a printer on the left and select 'reset printing system'. All printers will be deleted and need to be added again.

Maybe you are looking for