3 Messages getting struck in SMQ2 at same time with difference in seconds

Hi all,
Three  EOIO messages with Queue name QBTJ.......................(same Queue id  for 3days)
that is day1 QBTJ(message (a)  queue id=day2 QBTJ  queue id=day3 QBTJ  queue id
day1 QBTJ(message (b)  queue id=day2 QBTJ  queue id=day3 QBTJ  queue id
day1 QBTJ(message (c)  queue id=day2 QBTJ  queue id=day3 QBTJ  queue id
.These are getting struck in smq2 at same times (compared the timings 3 days).the time at which these messages are getting struck are same with the difference in seconds.
Other than these 3 different times ,these messages are moving with out strucking in SMQ2.
I have two questions here
1)what could be the reason for only these three messages are getting struck in smq2
2)is there any parameter which could be set in SXMB_ABMIN to unlock the queue automatically with out going to smq2 and manually unlocking.
Please do not send nonrelavent blogs
Thanks,
Srinivasa

Hello,
you can schedule the report RSQIWKEX in your XI system. This report does automatically unlock all queues.
See the blog for more details.
regards,
Björn

Similar Messages

  • Is it possible to get 2-ch signals from TDS2012 oscilloscope at the same time with LabVIEW "7.0"?

    Hi, everyone.
    I've been trying to get the signals from 2-ch of Tektronix TDS2012 oscilloscope at the same time using IVI connection with LabVIEW "7.0"
    I've already searched this developer zone for the answer.
    I've tried the famous example: "IviScope - Acq Dual Wfm Edge Triggered.vi"
    and it gave me the error message like:
    Error -1074110451 occurred at IviScope Initialize With Options.vi
    Possible reason(s):
    Driver Status:  (Hex 0xBFFA600D) Primary Error: (Hex 0xBFFA600D) The Config Server module is not present on the system.
    I think I've installed all~ the required softwares for IVI. For example, ICP 2.2, IVI engine 2.0.46, and tktds1k2k ivi (instrument driver for tds2012, in fact this one is for LabVIEW "7.1"... :-P)
    TDS2012 and my computer is connected through HPIB(GPIB) and it is shown on the MAX (a GPIB instrument as well as an IVI hardware asset)
    I've tried GPIB connection but it gives me asynchronous signals...
    Is it possible to get 2 signals at the same time with LabVIEW 7.0(not 7.1 or higher) by any means?
    What in the earth is the "Config Server" in this case?
    I don't need to sticking to IVI and any method to achieve my goal will be welcome.
    Could anyone give me the hint for this problem, plz?

    I think your problem is that the instrument specific driver is version 7.1 and you are using the class driver with 7.0. You can create your own 7.0 driver by downloading the LabWindows driver and using the Import CVI Instrument Driver under the Tools>Instrumentation menu.
    Since you don't seem to have a good reason to use IVI, why don't you try the native LabVIEW driver at http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E9139659CE034080020E748.... I believe you have all of the functions to setup each channel and then when you trigger the scope, both channels will be captured. You would then transfer each waveform separately. The data is always read sequentially but that's not important as long as both channels are triggered at the same time.

  • How to get more downloads at the same time

    On my old computer I could download 20 files at the same time (or more, depending on the size). I've got a new computer now but Safari only downloads 4 files at a time: the other files are put on hold and start only when anotehr file has finished downloading.
    How can I enable more downloads at the same time?

    I'm not using any enhancings apps, so... that can't be it. I did go from 10.3.x to 10.4.x, but I guess that's not the point either. Maybe some internetsettings is keeping things from going full throttle...?
    I download from Usenet a lot and downloading multiple files with Safari was very nice: I'd get 20 50 Mb files within a few minutes on my computer. Now I can only get 4 files in that same time (I guess it's a bit faster but not much: I have a VERY fast connection!). Okay, all in all it still only takes half an hour (probably less) to download 3 Gb this way, but I just wonder what's holding Safari back...
    (BTW Downloading big files spread into rars is VERY nice! If I had to download a 3 Gb file as ONE file, it would take a LOT more time...! Makes you wonder why not all companies offer their software (specially larger files) in smaller parts... They used to do that in the early internet days because otherwise you would never ever get that file downloaded on that 56k6 line, but nowadays it still would be great if they offered everything in small parts!

  • Messages getting stuck in SMQ2

    Messages get stuck in SMQ2 with the Error msg "SQL error on database occurred when accessing a table".
    This is happening on PI system 7.11 SP04 with Max DB version 7.7.06.07.
    This typically happens when sending messages from one BPM to another although it has more of a random pattern.
    A corresponding dump is also seen in ST22.
    The dump details are as below:
    Runtime error : DBIF_RSQL_SQL_ERROR
    Exception : CX_SY_OPEN_SQL_DB
    Database error text : Invalid numeric value for parameter/column (10)
    Internal call code : "[RSQL/UPDT/SWFRXIHDR ]"
    Any help is highly appreciated in resolving this issue.
    Regards,
    Murali Narayanan

    > The dump details are as below:
    > Runtime error : DBIF_RSQL_SQL_ERROR
    > Exception : CX_SY_OPEN_SQL_DB
    > Database error text : Invalid numeric value for parameter/column (10)
    I would update the kernel (plus the database interface library lib_dbsl) to the latest patchlevels and try again. If the error persists I'd upgrade the database to the latest patchlevel. If it still doesn't work I'd open an OSS call (BC-DB-SDB).
    Markus

  • When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

    When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

    When two or more devices conflict it typically means that the DHCP service is either misconfigured or is not running at all. DHCP provides IP addresses to local network clients.
    Is your AirPort Express base station the only router in your current network configuration? That is, is it connected directly to an Internet modem and not to another router upstream of it?

  • HT1752 Hi, I want to play my music through my Comp as well as my wireless speaker.. i can only seem to get one working at a time, is it possible to get both working at the same time??  Thanks Kylie

    Hi, I want to play my music through my Comp as well as my wireless speaker.. i can only seem to get one working at a time, is it possible to get both working at the same time??  Thanks Kylie

    Hi Kylie,
    Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there.

  • Can you use 2 bluetooth headphones at the same time with ipad?

    I'd like to purchase 2 bluetooth headsets for my elderly parents to use with their ipad for FaceTime. They both typically use FaceTime at the same time to talk to their grandkids, but have difficulty hearing just using the ipad speaker. Is it possible to utilize 2 bluetooth headsets at the same time with ipad. If not, what's the best alternative? (Wired headsets will not work as they also are often caring for another young grandchild at the time and can't be tethered)

    You can only pair to one BT headset at a time.
    As an alternative, have you considered a BT speaker  so you can increase the volume of the Facetime call?

  • Can I view the same pdf on multiple iPads at the same time with 1 iPad operating as the master (controlling page turns etc)?

    Would like to use 4nr iPads as an autocue system. Can I view the same pdf on multiple iPads at the same time with 1 iPad operating as the master (controlling page turns etc) and the others operating as slaves? Can this be done without the use of 3G or a remote Wifi hub? I would appreciate your input.................

    Open the document in Acrobat Reader and use the menu Window > New Window.

  • Can you use 2 sets of bluetooth headphones at the same time with the Ipad 4?

    Hi, I was wondering if anyone could tell me if I can use 2 sets of bluetooth headphones at the same time with the Ipad?
    It is so my children can watch a film or listen to music together.
    Thanks

    No

  • I have created a form which needs to be completed once a week for 6 weeks. On completing week 1, weeks 2 - 6 are completed at the same time with week 1 information. please help?

    I have created a form which needs to be completed once a week for 6 weeks. On completing week 1, weeks 2 - 6 are completed at the same time with week 1 information. please help?

    Hello, thanks for replying.
    Yes they just copy to the next page, the fields are the same. The document is an observation to school lessons so it needs to be consistent but with different data on.

  • I want to teach adobe illustrator to my students. If I buy CC-illustrator, Can we work  in the same time with each devices with my ID ?

    I want to teach adobe illustrator to my students. If I buy CC-illustrator, Can we work  in the same time with each devices with my ID ?

    No you have your own ID number

  • 16 channels of audio recording at the same time with a MAC BOOK?

    Hi,
    I want to know how many channels of audio I can record at the same-time with a MAC BOOK (2.16GHz Intel Core 2 Duo, 1GB memory 120GB hard drive, Double-layer SuperDrive), firewire audio device and Logic Pro 8?
    You see I am aiming to record a live gig and I want to come into a firewire recording interface with 16 channels of audio all at the same time (24-bit, 44Khz) Does anyone know if this is possible? Or am I looking for trouble? No plug-ins will be used just record straight in. Anyone have some experience with this?
    Thanks.

    Ok, like this:
    Macbook - FW Port - FW Cable -In- MOTU Traveler -Out- External Harddrive.
    Firewire is capable of chaining units.
    Also plugged into your motu traveler will be an optical cable coming from the ADA.
    This will carry the 8 channels of audio it outputs.
    Also another good thing to do is to also have an optical cable FROM the optical output of your Traveler into the Behringer's input.
    That way you can sync the Behringer's digital clock to that of the Traveler, giving you a slightly better sounding signal that if you were to sync the traveler to the Behringer. This is simply because the traveler has a better quality digital clock than the Behringer unit so it's best to use that. To do this you just select "Adat input" on the back of the Behringer, and leave the Travelers sync to "Internal Clock". It is only a very very slight difference and you may not be able to notice the difference but for the cost of an optical cable it's worth doing.
    It will all make a lot more sense when you have the two units and the harddrive all plugged in.

  • My ipod has a black screen.  I have tried to hold the sleep/off button and menu button at the same time with no luck.   I connected to my computer and tried restore on itunes -  still with a black screen a voice said "screen locked'  code 542

    My ipod has a black screen.  I have tried to hold the sleep/off button and menu button at the same time with no luck.   I connected to my computer and tried restore on itunes -  still with a black screen a voice said "screen locked'  code 542

    Is the iPad charged?  Plug it in with the charger/wall outlet for half an hour and try again to reboot by holding both the power and home buttons until the apple logo appears.

  • Acquire Analog and Digital inputs at the same time with 6025E card

    I have 6025E DAQ card, all the analog channels are used
    up. There are several digital signals, such as flowmeter. Can I acquire both kinds of data at the same time with my 6025E card? Thanks for your help.

    I suggest you search the examples that ship with LV
    Digital
    Find Examples>>>Hardware Input and Output>>>Digital Input and Output>>>8255
    for doing each type of I/O seperately.
    When you have found two examples. Just try to run the two at the rate use need in your final app.
    Post follow-ups Q's here. I am not personally familiar with that deveice so I can not speak from experience.
    I would generally expect that if you sample rate is low (i.e. <10Hz) you maybe happy with the results. If you want to run faster or have the PC do something else at the same time, the timing of the signals form the DIO lines may be suspect.
    So...
    It depends.
    Trying to help,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Can I record video and line in mixer at the same time with iPod touch?

    Can I record video and line in mixer audio at the same time, with the iPod touch?

    What is a "line in imxer audio" You can use an externeral mic plugged into the headphone jack to record auid for a video using the 4G iPod's camera.

Maybe you are looking for