3 Movies On One Disc

I have three home movies I made on iMovie that I want to burn on one disc. Do I use chapters to do this? How do I make chapters?

catspaw wrote:
Hi isign31 - just import all 3 into an iDVD project.
in addition to catspaw (greetings to New Zealand, hi Bruce!!) excellent advice:
your iM projects are located.. I assume in the 'Movies' folder. just 'grab' the projects and drag them into the open iDVD window..
chapters are just 'bookmarks', 'jump lables' within one movie. if you prefer chapters, you have to consolidate all 3 projects into one and add the chapter markers with the .. chapter marker feature of iM
consolidating means: export each project 'Quicktime/Full Quality' (=which creates huge files.. you can erase them after finishing iDVD project); import these 3 exports into a new iM project; add chapters.. create disk.

Similar Messages

  • How to burn 2 movie in one disc

    hi guys,
    newbie here..need help...i got 2 clips that gotta burn in one disc..but my client doenst wan a menus..they wan the disc keep looping between this 2 file....somemore its 16:9..if my ori visual is 720*576, can i burn in 16:9 letterbox so that widescreen on normal tv but fullscreen on lcdtv? how will the visual will be? pixelize?...however, wat more confuse me is the steps to to import int he file n burn it..this is my very first time to use dvd studio pro 4..plz help ....
    Message was edited by: ycngjack1

    Hi ycngjack1:
    You're fine putting just video content on your DVD. There's no rule that says you have to have a menu.
    You'll want to set the "First Play" option in DVDSP to your Track that contains your video. By default, a DVDSP project starts with one Menu and one Track with "First Play" set to the menu.
    720x576 is the correct frame size for a PAL MPEG2 stream, whether it's full frame material (4x3) or widescreen material (16x9). You need to be sure to set the "Display Mode" setting for the Track correctly in DVDSP in the Inspector palette. Also, this setting must correspond with your Video Stream for correct results. In other words, you place full frame clips into a full frame Track and widescreen clips into a widescreen Track. If you need to mix the two, you have to address this prior to encoding or importing the clips back in your editing applications (Final Cut Pro, Final Cut Express, After Effects, etc.) and conform your footage to either full frame or widescreen.
    Getting back to your question, "can i burn in 16:9 letterbox so that widescreen on normal tv but fullscreen on lcdtv?" It sounds like you are talking about creating a "hard matte", meaning that your 16x9 image is scaled proportionally to fit within a 4x3 image, leaving black bars at the top and bottom (the letterbox). This will result in a letterbox picture on a 4x3 TV and a pillarbox picture (black on the sides) on a 16x9 LCD TV that's also letterbox inside of that.
    Without actually seeing your source footage, it's hard to tell you exactly what to do.
    For the results that I think you are looking for, you'll want your 16x9 picture to be squeezed into 720x576 (everything should look thin and distorted without black bars at the top and bottom),
    This might also help:
    a. Place your clips into a Track and set the Display Mode to 4:3 (the first setting of four, the others being 16:9 Pan-Scan, 16:9 Letterbox, and 16:9 Pan-Scan & Letterbox).
    b. Set the Track to be the "First Play".
    c. Click the "Simulate" button.
    d. While the Simulator is running, change the Display Mode between the three options: 4:3 Pan-Scan, 4:3 letterbox, and 16x9.
    e. Quit the Simulator and change the Track Display Mode to the next setting, 16:9 Pan-Scan.
    f. Run the Simulator again and change the Display Mode between the three options.
    g. Repeat this until you've done all four of the Track Display Mode Settings.
    This should help you reverse engineer your source footage.
    Good luck!
    -Warren

  • How to combine 3 completed short movies into one disc?

    I made 3 projects, created disc images, and burned them successufully, one at a time. Since they are only about 15 minutes each, I would like to now combine them into one DVD. I want to keep the originals as is, meaning the same different DVD theme each one has. Is there a way to do that? I tried to use Toast, but it can't import some files and tells me there is a mac error. Can I create a new DVD theme, sort of introducing the 3 projects, them import the 3 completed projects into it, so that it will play the different iDVD thems for each? Any help would be appreciated.

    hey there MaxFS,
    you can put all 3 movies into 1 DVD project, but you can't have 3 themes in one project--no version of iDVD works that way. neither does any version of Toast. 1 Project=1 Theme. if you have submenus you can make the submenu page be different from the main menu page.
    good luck.

  • Can you burn multible movies on one bluray dvd disc with final cut pro

    how to burn two completed quick time movies to blu ray dvd with final cut pro? Ive tried but wont play

    Mark,
    Welcome to the wild and wacky world of DVD's and Mpeg2!
    Here are a few things that might help.
    it seems to want everything as a QT. This presents size limitations.
    Not really, iDVD simply takes the QT files that you feed it and uses its own compressor to encode them to mpeg2 files. As long as your source material is not over 2 hours iDVD can handle it.
    I'm planning to export from fcp using Compressor in the hope of fitting everything onto one disc
    You can do this, but you might find it simpler to simply export a QT reference movie from FCP and drag that into DVDSP. DVDSP will then use compressor to create the mpeg2 files that you need. I say this because some find compressor a little intimidating at first. (I know that I still do.)
    Now, go find the manuals that came with your software and start reading, DVDSP is a powerful program and the manuals are the best place to start.
    Good luck!
    K

  • ?? burn multiple iMovie movies onto one dvd with iDVD

    I understand how to burn a single iMovie project onto a dvd by using the share menu to share with iDVD. But how can i burn multiple iMovie projects with iDVD onto one disc??

    You can share the first movie from iMovie, but all the others will need to be exported from iMovie as movies and dragged into the iMovie project.

  • Burning multiple movies to one DVD

    I want to burn 8 short movies to one DVD. Do I have to use a DVD RW or is there a way to burn all 8 to a DVD-R?

    You probably only have a single-layer drive so you
    will be limited to a maximum playing time of about
    120 minutes in Best Quality mode. We recommend
    Verbatim or Maxell DVD-R for single-layer discs.
    BTW, iDVD compresses everything to mpg-2 so the
    playing time of your content in minutes is the
    important factor - the size of your original files in
    MB doesn't come into play.
    F Shippey
    thanks for the tip on type of DVD, but my immediate problem is that when I burn to a DVD, I can only do one movie. I am looking for a way to select all of them vs 1 at a time. I tried the advanced & edit DVD contents but I still have the problem that the program will only burn one movie at a time & then because it is DVD-R, I can't add another. I need to be able to put all 8 on at once (or at least one after another). Is there a way to "combine" them for burning?

  • Move up one level in path and make new folder

    How do I get applescript to make a new folder one level up from myFolder i.e.
    set myFolder to ¬
    (choose folder with prompt "Where are the image files for which you want to change exif data ?") as reference
    make new folder at myFolder with properties {name:"Gallery JPEGs"}
    makes a new folder inside myFolder, but how do I tell it to move up one level from myFolder and make a new folder?
    Thanks.
    Pedro

    You can use statements such as the following ones:
    *tell application "Finder" to make new folder at container of myFolder with properties {name:"Gallery JPEGs"}*
    or
    *tell application "Finder" to make new folder at container of container of myFolder with properties {name:"Gallery JPEGs"}*
    and so on…
    And if you want the folder “myFolder” to be contained by the folder “Gallery JPEGs”, use the following statements:
    *tell application "Finder"*
    *make new folder at container of myFolder with properties {name:"Gallery JPEGs"}*
    *move myFolder to the result*
    *end tell*
    Message was edited by: Pierre L.

  • How do I move up one folder while browsing Time Machine?

    When I'm viewing a folder in Time Machine's "Star Wars" view, how do I move up one folder, to view the current folder's parent folder?
    In Finder, I have several ways to do it: I could either hit CMD+Up Arrow, or CMD-click the title bar then click on the parent folder I want, or double-click the folder I want from the folder path in the bottom bar. But none of these methods work in Time Machine.

    JUst like you would in the Finder.  I use the Path button in the Finder's toolbar:
    If you don't thave the Path button in the toolbar use the Customize Toolbar menu option in any Finder window to place it in the toolbar.
    OT

  • I used to open many tabs in the same page and i move from one to other by mouse but since3 two days the tabs open in the same page normaly but i can't move from one to other when i clik with mouse on any tab it don't open/ do u have any solve for this?

    i used to open many tabs in the same page and i move from one to other by mouse but since3 two days the tabs open in the same page normaly but i can't move from one to other when i clik with mouse on any tab it don't open/ do u have any solve for this

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • How do I move a purchased movie from one Mac to an Mac Air using iTunes

    How do I move a purchased movie from one Mac to an Mac Air using iTunes

    You should start "Home Sharing".  You will need to authorise your two computer.  Once Home Sharing is activated, you will see shared iTunes libraries and it will allow you to simply drag'n drop any content.

  • HT1657 how do i move movie from one device to another

    how do i move from one device to another

    Ahh, Ok. I actually had to go to Lynda.com to watch a training video of this highly bassackwards maneuver, but now I have it. In other words, while the intuitive thing is to make a new event to hold the clip you want and then open the old event and drag the clip into it's new event, the only way to accomplish this maneuver is to NOT create a new event, but rather, go to the clip AFTER the one you want to move, select it and then Right-Click on it and select SPLIT EVENT BEFORE SELECTED CLIP (or go to FILE>SPLIT EVENT BEFORE SELECTED CLIP). Then you wait a few seconds while the program thinks a bit (no feedback it is doing this - just a pause) and then it automatically creates a new event with the clip you wanted. Now just double-click the new event and name it something meaningful.
    Thanks for your help!

  • HT1688 Messaging does not let me move from one conversation to another without going to the contact info of the person and choosing "send a message", then I can continue the conversation. I'm sure it's a setting I have made by mistake, but can't figure it

    Messaging does not let me move from one conversation to another without going to the contact info of the person and choosing "send a message", then I can continue the conversation. I'm sure it's a setting I have made by mistake, but can't figure it out

    Hi Elaine
    Here si what I do:
    Since I tend to message with teh same people I leave the messages available to me.  If you are in one conversation with "Karen"  and want to message with "Kathy" tap the message back arrow and select Kathy.
    As always just be careful to rememeber who you are messaging to!

  • I travel - a lot. I have apple accounts in Canada, US and Brazil. I want to consolidate and listen to my music and movies on one device. Right now there is a 90 day limit per account on each device. How can I download and use all my purchases?

    There must be a way for people who live in several countries or speak several languages to purchase music and movies in various national Apple IDs and then consolidate and listen to the media they own on just one device. How can I do that?

    There must be a way to get all the music and movies into one place. Maybe on Laptop rather than iPhone or iPad. I can get one set to one ID and the other to another, then switch to the third ID since I have not changed the two in 90 days. But I would need to download all media during the time each device is on each ID. Must be possible, but I don't know how.

  • Is there a way I can move movies from one itunes library to another on the same computer?

    Is there a way I can move movies from one itunes library to another on the same computer?

    Locate them in the Windows Explorer, move or copy those files as you would any other, and drag them into the open iTunes window when the second library is loaded. If you're using two iTunes libraries on one user account, you only need to locate the files; otherwise, they need to be put in a shared area.
    (63747)

  • How can i transfer a digital movie from one apple id to another apple id?

    how can i transfer a digital movie from one apple id to another apple id?

    You buy it from that ID or ask the iTunes Store staff for assistance.
    (80985)

Maybe you are looking for