3 Nodes with transport Switches

Hi Support,
I am having new installation of 3 nodes oracle 9i cluster , i have probelm in cluster interconnect VLAN issues , I am getting below error msg when I try to assign network interface as private .
unexpected network traffic was seen on e1000g1 may be cabled to a public network . Thus the nodes can not join the cluster
I have configured 2x VLANs , First VLAN in first switch including server1:e1000g0,server2:e1000g0,server3:e1000g0 and another VLAN is switch2 icluding server1:e1000g3, server2:e1000g3,server3:e1000g3 ..
But still givin above mesg , what is the probelm and how Should I configure the switches ??? and whic traffic is going on ?
Thank

Is this during the running of scinstall? If so, it shouldn't prevent you from installing the clusters. There should be a question like:
"Expected traffic seen on network... Do you still want to use this network"
or something like that. You should say yes, if you have correctly configured your switches. You often see this kind of traffic where the switches are keeping some internal state. At least, I've seen it before and it was never a problem.
However, if you've configured you switches incorrectly, you could be heading into trouble. I suggest using snoop to see what traffic is on those networks.
Regards,
Tim
---

Similar Messages

Analysis Authorization based on Hier node with multiple display hierarchies

Hi guys - I've got a problem where s.o. might have an idea of how to switch on the light at the end of the tunnel, I am currently standing in:
Requirement:
Cost Center Authorization should be given through RSECADMIN, reporting should be possible for any hierarchy that exists for the authorization relevant info object.
Preferred solution:
The Cost Center Analysis Authorization should be given through RSECADMIN - Hierarchy node assignment.
u2022     A dedicated Authorization Cost Center Hierarchy will be maintained in ECC6 as an alternative cost center hierarchy and extracted into BW.
u2022     The RSECADMIN Hierarchy node assignment should be based on a particular node (Type 2).
u2022     The display level will be specified as required (here: Level 7)
u2022     The Authorization granted should be independent of hierarchy name and version (validity 3).
Reporting Scenario and technical impact:
As mentioned above, when designing and running a query the user should be able to freely select other (i.e. than the authorization) display hierarchies for the authorization relevant reporting object 'Cost Center' as well. The technical names of the semantically relevant hierarchy nodes could therefore vary. E.g. cost centers 1, 2 and 3, being assigned under hierarchy node u2018Au2019 of the RSECADMIN relevant authorization hierarchy, could be subsumed by hierarchy node u2018Bu2019 in another display hierarchy, which the user may want to display in accordance to his reporting needs. Ideally, the alternative display hierarchy should therefore display node u2018Bu2019.
My findings so far (based on prototyping) turn out that this is not possible as long u2018Bu2019 (and its hierarchy) is not authorized in RSECADMIN. Can these findings be confirmed? And if not, would anyone have an idea of how to facilitate the reporting scenario?
Would there be any other way to grant access, possibly based on RSECADMIN single values, and also enable the user to flexibly display hierarchies with only those hierarchy nodes whose single cost center values the user has been given access to?
Thanks everyone for your input...
Claus
Edited by: Claus64 on Jul 13, 2009 4:10 AM

HI CLause,
On Jul 14 2009, you wrote in SDN and said:
FYI: Found a solution...
The hierarchy analysis authorization will be based on a navigational attribute of cost center.
With analysis authorizations it is possible to declare the Auth object (e.g. 0COSTCENTER__RACCAUT0) as authorization relevant and leave the superior object 0COSTCENTER auth irrelevant.
The auth will be given for 0COSTCENTER__RACCAUT0. This object will be placed as a filter of the query, being restricted by an Authorization variable for hierarchy nodes.
Due to the concept of Analysis Authorizations, this variable will automatically pick up the nodes granted as part of RSECADMIN Hierarchy based Authorization.
As mentioned above, 0COSTCENTER as the regular reporting characteristic remains auth irrelevant and can therefore take any hierarchy thatu2019s available. Reporting on single values will be possible, too. Only those nodes show up that hold the authorized cost centers in accordance to the authorization.
If the auth relevant 0COSTCENTER__RACCAUT0 is not used in the query definition by either not taking it in as a filter or skipping the Auth variable, the query will launch the message that the authorization is missing. No data show up at all.
Claus
See this thread:
Analysis Authorization based on Hier node with multiple display hierarchies
I am also in the same situation as you and need to understadn your solution. I understand that you created a Nav Attr on 0COSTCENTER and made this auth relevant whilst ensuring that 0COSTCENTER is NOT auth relevant. This is all fine. The issue was you have multiple hierachies for 0COSTCENTER, how did the new Nav Attr help you solve your issue. When loading 0COSTCENTER what values did you load ino the new Nav Attribute and how did that link to the hierachies? Also, in RSECADMIN you created hiearchy nodes based on the Nav Attribute but I am confused as to what values you have in the Nav Attr.
I appreciate if you can share your solution from the past in more details.
many thanks

Send step with TRANSPORT Ack. fails in BPE after default client change

Hi all,
I had to change default client in my PI (7.0 sps 13) system from 001 to xxx. I did it according to note 940309.
After this some probelms appears, for example my IPs becomes unworked and I have to repeat automatic customizing for BPE and re-activate in cache my IPs.
But some of them sill doesn't work. I found that this IPs fails on send steps with transport acknowledgements. When I switch off transport ack. in send step, it become works fine.
Please provide me with some solution, because I need transport ack. in my IPs.
Maxim.

Additional info:
BPE monitoring shows that send step fails with errors:
EXECUTE_METHOD_OBJECT_SYNC
Work item 000000057118: Object CL_SWF_XI_SRV_SEND_ASYNCHRON method SEND_ASYNCHRON cannot be executed
Maxim.

Using code interface node with dll crashes LV 2011 but not LV 8.6... using max error handling does nothing

Hi all,
I'm having a peculiar problem.
I inherited a project saved in LabVIEW 8.6. The project must use of particular dll that was built a few years ago. The original developer and source code for this .dll are long gone. The very core logic exists, in the form of embedded C code, and that's it. The .dll is called through a Code Interface Node in LV 8.6 and this setup manages to "work". Howver, running the VI that calls this .dll in LV 2011 causes an "insta crash", as in, no "program has stopped responding". Error message pops up, then all LV windows close.
It's very similar to that described in here:
http://digital.ni.com/public.nsf/allkb/D84C9775ABD921CF8625772A005CA50C
but this KB says to try putting the amount of error handling to maximum. I tried that, but it didn't help.
Using the "Debug" option allows me to run the just-in-time debugger with CVI 2010, which then proceeds to say this:
Finally, I manage to get this out of it:
FATAL RUN-TIME ERROR: Unknown source position, thread id 0x000012D4: A non-debuggable thread caused a 'General Protection' fault at address 0x00000000.
I don't think that really helps at all, but it's there.
Here is the function prototype of the .dll:
void _inputPM@224(uint8_t arg1, uint16_t arg2, uint8_t arg3, float arg4, float arg5, float arg6, float arg7, float arg8, float arg9, float arg10, float arg11, float arg12, float arg13, float arg14, float arg15, float arg16, float arg17, uint16_t arg18, uint16_t arg19, uint16_t arg20, uint16_t arg21, uint16_t arg22, uint16_t arg23, uint16_t arg24, uint16_t arg25, uint16_t arg26, float arg27, float arg28, float arg29, float arg30, float arg31, float arg32, float arg33, float arg34, float arg35, float arg36, float arg37, float arg38, float arg39, float arg40, float arg41, float arg42, float arg43, float arg44, float arg45, float arg46, float arg47, uint16_t arg48, uint16_t arg49, uint16_t arg50, uint16_t arg51, uint16_t arg52, float arg53, float arg54, float arg55, float arg56);
(never seen a function take 50 input params like that (wouldn't you use a struct? array? something? But I digress, and I don't know anything about .dlls...))
I do have a ".lib" and a ".cdb" file with the same name as the .dll, but those also looks like some kind of compiled file.
I'm sure the answer I'm going to get is that there is no way of telling what's really going on without .dll source code. I'm hoping against hope that there may be another way or hack.
Any ideas? Thank you for you help.
Regards,
Mark G
Solved!
Go to Solution.

MarkCG wrote:
Changing the call library node to stdcall (WINAPI) did the trick! No more crash. Thank you very much!
I haven't run LV2011 on windows XP, only on windows 7, so I don't know if that makes a dfference. But The call type makes no difference when using LV 8.6 on the same machine, however.
Now I've got to make the .DLL run corretly on a compact fieldpoint.... and avoid crashing IT.
Thank you for the help all!
Well, the DLL did work fine in LabVIEW 8.6 because earlier versions of LabVIEW automatically proceeded to change the calling convention to stdcall, if they noticed a function name decoration of @# (# = number of bytes passed on the stack) appended to the name. This is the default naming decoration for stdcall functions used by VisualC. However this decoration can be overwritten with linker switches, other compilers don't use them always in the same way, and most likely there are in the mean time compilers out there that can produce such decorations also for non stdcall calling convention. So this automagic trickery was removed from newer LabVIEW versions.
I do think it could be considered a bug in the code that upgrades LabVIEW VIs, that it uses the calling convention that is configuerd in the dialog, instead of the calling convention earlier LabVIEW versions used automagically, but it is an esoteric corner case.
What Compact Fieldpoint controller do you have? If it's anything newer than 20xx or 21xx forget it. The 22xx controllers use a PPC CPU and VxWorks operating system and can never get a Windows DLL to operate properly. If it is a 20xx controller it's still highly likely that DLL can not even get loaded into LabVIEW as it likely relies on other runtime libraries and possibly Win32 APIs not present in the Pharlap ETS runtime kernel used on those controllers.
There is a tool to check a DLL for incompatible imports that are not present on specific ETS RT systems. And this list summarizes the RT system used on the various NI controllers.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Database upgrade - Oracle 10g r2 ,RAC(2 Nodes with ASM) upgrade from HP-UX to RHEL 5.9

Hi All
I am planning to upgrade our RAC database 2 nodes with ASM from HP-UX to RHEL 5.9.
Following is our setup
Current setup:
Oracle Database 10g r2 (10.2.0.5.0) RAC database.
Nodes: 2
Storage: ASM
OS: HP-UX ia64
Database Size: 1.2 TB
New Setup:
Oracle Database 10g r2(10.2.0.5.0) RAC database
Nodes: 2
Storage: ASM
OS: RHEL 5.9 x86 64
Since we are moving from a big endian format to a small endian format(HP-UX to RHEL 5.9) the same ASM cannot be used.
Kindly help me with process and other important documents to be followed.
Thanks.

Hi...
If it was a standlone database concepts like transportable tablespaces, rman would have been convenient.
Since we are using a RAC database with ASM as storage how do we use these techniques specified in NOTE:733205.1
Due to endianness issue we cannot use the same ASM instance.
Along with the new RAC node install a new ASM instance would have to be created.
Kindly help me with migration for RAC with existing ASM to new Hardware
Thanks and Regards

Filtering more than one node with the command SAPBEXFilterValue

Hello everybody,
i have an issue with the
Function SAPBEXsetFilterValue(intValue As String, Optional hierValue As String, Optional atCell As Range) As Integer
Filtering with cell atCell (if this parameter is missing, then the active cell is taken as the basis)
The internal filter value must be entered in the parameter intValue. Please note that this value can be displayed differently from the external value displayed in the filter cell. You can either use SAPBEXgetFilterValue or carry out the filter process once manually with the log book function switched on in order to determine the internal value for a known external value. The internal filter value is noted in the log.
Enter the parameter hierValue when dealing with a node of a certain characteristic hierarchy with the filter value.
"intValue = <blank>" means "do not filter anymore"
If no connection to a BW server exists the function starts a logon dialog.
The function produces a context error if atCell is not a filter cell.
My problem:
i would like to select inner nodes. With one node it is not a problem. I have just to use the technical name for the inner node as intValue. But I would like to select more than one node. I would like to filter 4 inner nodes with the SETBEXgetfilter command but it does not work.
i tried also to set them iteratively but when the second filtervalue is selected the first will be overwritten.
If i select more than one navigation panes to filter the nodes differently on a seperate navigation pane it also does not work because all navigation panes are connected and show the same.
Does anybody know how to filter more than one node in the same hierarchy. manually it works. So there should be a way to do that with VBA.
Thank you in Advance and kind regards,
Murat

solved

Core LAN with 3850 switches

Hi everyone,
I know Cisco does not classify the 3850 series switches as a core switch even in small implementations neither there is information on StackWise-480 how this is working in high availability in a similar way as VSS. What I am wondering whether I could create a DSN (Data-Center Services Node) with 2 of those switches, insert ASAs or Load Balancers in a DSN manner and L3 port-channel those into each switch, something similar to MEC in VSS.
Anybody has any experience in implementing those switches in a similar way or it has any comments on that I would greatly appreciate it.
Thanks in advance.
Remi

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Again, can't speak specifically about the 3850s, although in principle, believe its supposed to function like StackWise does on a 3750s.
On the 3750s stacks, failure of a member switch isn't too bad, but failure of the stack master can cause a "blip". One potential issue, again on 3750s, is by default, stacks use the original stack master's MAC, and also by default, it changes when a new stack master is elected. This can cause MEC port-channels to drop. In theory, stack members are supposed to be able to continue to L2 forward during even a stack master reelection. L3 forwarding depends on NSF settings (and stack MAC). Stack MAC issues can be mitigated by using the persistent option.
I recall (?) reading 3850s stacks are more VSS like than 3750 stacks (although "regular" VSS only supports two members).
So, again, I'm unsure how solid a 3850 stack would be.
PS:
Depending on your core port needs, maybe a 4500-X VSS pair would be a better choice.

Host with transport directory in win 2003 mscs

Hi There,
Im installing central instance in mscs envi with oracle database.
Im on a screen in Central instance installation asking for host with transport directory.Im just wondering what it will be is it normal hostname which is my first node's host name or a virtual hostname?
Regards
raj

hi angel,
Try to re-reg sid_01 service
Please copy sapstartsrv.exe and sapstartsrv.exe.new from CT_RUN
for example \usr\sap\<SID>\SYS\exe\uc\NTAMD64
direcrory to exe folder the service is point to overwrite the exe's
there.
Also delete any sapstartsrv.exe.tmp in exe folder.
If error persists
1. Stop the SAP service
2. Open a command prompt
3. Go to usr\sap\<SID>\exe\run
4. call 'sapstartsrv.exe -t' from the command line
5. Confirm
the dialog window
6. Start the service again
give the above a try .the purpose is sapstartsrv.exe must be the same version and at same level..
good luck
raj

RSAU_UPDR_REACTIVATE_ALL program running with transport

Hi,
We have a newly built dev BW system . As part of the post steps we have run the necessary programs but when we are trying to run the program RSAU_UPDR_REACTIVATE_ALL we are asked with transport creation request .If the transport number is provided and continued we get QAS system doesn't exist .Since dev being newly built there is no QAS . Can the program be run without the transport request?
Regards,
Anup

In RSA1 --> Transport connection --> EDIT --> Transport --> Switch off standard.
Check this then try to run this program.

Hier Node with character (e.g. 11100A) is not getting displayed in report

Hi All,
I have loaded the Finanacial Statement Version Hier in BI. It is perfectly loaded in the InfoObject 0GLACCEXT.
Some Hier Nodes contain charcters in the Node name like 1100A and 1100B and rest are all number like 1100, 1200, 11000 etc.
While I run the Report the Hier Nodes with nos (like 1100, 11000) are perfectly getting displyed in the report. But the Hier Nodes having the characters (like 1100A and 1100B) are not getting displayed into the Report and all the GLs under it are going into Unassigned node in the Reports.
Plz help me.
Regards,
Sandeep

Sandeep,
Your hierarchy is made up of characteristics with the values 1100, 11100A etc.
In your hierarchy is RSH1, does each node have the specific characteristic value Node 1
-1100
-11100A etc
Or is it a range i.e.
Node 1
1000 : 11100A
Regards
Gill

How to create a node with attributes at runtime in webdynpro for ABAP?

Hi Experts,
         How to create a node with attributes at runtime in webdynpro for ABAP? What classes or interfaces I should use? Please provide some sample code.
I have checked IF_WD_CONTEXT_NODE_INFO and there is ADD_NEW_CHILD_NODE method. But this is not creating any node. I this this creates only a "node info" object.
I even check IF_WD_CONTEXT_NODE but i could not find any method that creates a node with attribute.
Please help!
Thanks
Gopal

Hi
   I am getting the following error while creating a dynamic context node with 2 attributes. Please help me resolve this problem.
Note
The following error text was processed in the system PET : Line types of an internal table and a work area not compatible.
The error occurred on the application server FMSAP995_PET_02 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WD_CONTEXT_NODE~GET_STATIC_ATTRIBUTES_TABLE of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: GET_REF_TO_TABLE of program CL_SALV_WD_DATA_TABLE=========CP
Method: EXECUTE of program CL_SALV_WD_SERVICE_MANAGER====CP
Method: APPLY_SERVICES of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: REFRESH of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE_DATA of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~UPDATE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_VIEW~MODIFY of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMPONENT~VIEW_MODIFY of program CL_SALV_WD_A_COMPONENT========CP
My code is like the following:
TYPES: BEGIN OF t_type,
            CARRID TYPE sflight-carrid,
            CONNID TYPE sflight-connid,
         END OF t_type.
Data: i_struc type table of t_type,
dyn_node   type ref to if_wd_context_node,
rootnode_info   type ref to if_wd_context_node_info,
i_node_att type wdr_context_attr_info_map,
wa_node_att type line of wdr_context_attr_info_map.
      wa_node_att-name = 'CARRID'.
      wa_node_att-TYPE_NAME = 'SFLIGHT-CARRID'.
      insert wa_node_att into table i_node_att.
      wa_node_att-name = 'CONNID'.
      wa_node_att-TYPE_NAME = 'SFLIGHT-CONNID'.
      insert wa_node_att into table i_node_att.
clear i_struc. refresh i_struc.
select carrid connid into corresponding fields of table i_struc from sflight where carrid = 'AA'.
rootnode_info = wd_context->get_node_info( ).
rootnode_info->add_new_child_node( name = 'DYNFLIGHT'
                                   attributes = i_node_att
                                   is_multiple = abap_true ).
dyn_node = wd_context->get_child_node( 'DYNFLIGHT' ).
dyn_node->bind_table( i_struc ).
l_ref_interfacecontroller->set_data( dyn_node ).
I am trying to create a new node. That is
CONTEXT
- DYNFLIGHT
CARRID
CONNID
As you see above I am trying to create 'DYNFLIGHT' along with the 2 attributes which are inside this node. The structure of the node that is, no.of attributes may vary based on some condition. Thats why I am trying to create a node dynamically.
Also I cannot define the structure in the ABAP dictionary because it changes based on condition
Message was edited by: gopalkrishna baliga

Problem replacing Null nodes with real values in XML documents...

Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
Our friends in Java land are insisting on passing data between Java and PL/SQL using fairly small XML documents (don't ask). I then need to extract the input parameter values and pass them, on to the stored procedures that actually do the work. These return a result which needs to be returned to the java layer in the output XML document.
Here is a cut down version of the input XML...
<ParameterList xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Parameter>
<Id>1</Id>
<Result xsi:nil="true"/>
</Parameter>
<Parameter>
<Id>2</Id>
<Result xsi:nil="true"/>
</Parameter>
</ParameterList>
and this is an example of what I am expected to return...
<ParameterList xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Parameter>
<Id>1</Id>
*<Result>SUCCESS</Result>*
</Parameter>
<Parameter>
<Id>2</Id>
*<Result>WARNING</Result>*
</Parameter>
</ParameterList>
i.e. I am expected to replace the value of the Result node with a string indicating the succes or otherwise of the underlying PL/SQL process.
I am extracting the input values using the DBMS_XMLDOM functions and naively assumed that DBMS_XMLDOM.SETNODEVALUE could be used to update the value in the Result node - It didn't work so I resorted to reading the documentation which revealed that it will not work for a null node.
Am I going to have to use XSLT to generate the output XML from the Input and incorprate the result? Or is there a simpler way?
I have used XSLT in Oracle before and still have the nervous tick...

Thanks A Non,
With your suggestion and a bit of help from the w3schools.com xml dom tutorial I eventually managed to work out how to do this.
Here is the code (with all my debug stuff in so it looks worse than it is...)
create or replace
PROCEDURE ExtractXMLValues (p_inXml IN CLOB ) IS
l_string VARCHAR2(4000);
l_value VARCHAR2(4000);
l_DOM_doc dbms_xmldom.DOMDocument;
l_DOM_node dbms_xmldom.DOMNode;
l_new_DOM_node dbms_xmldom.DOMNode;
l_new_element dbms_xmldom.DOMElement;
l_new_DOM_nodevalue dbms_xmldom.DOMNode;
l_value_Node dbms_xmldom.DOMNode;
l_parameter_Node dbms_xmldom.DOMNode;
--l_DOM_nodelist dbms_xmldom.DOMNodeList;
l_Result_DOM_node dbms_xmldom.DOMNode;
BEGIN
l_DOM_doc := dbms_xmldom.newDomDocument(p_inXml);
l_DOM_node := dbms_xmldom.makeNode(l_DOM_doc);
dbms_xmldom.writeToBuffer(l_DOM_node, l_string);
dbms_output.put_line('1 ' || l_string);
l_parameter_node := dbms_xslprocessor.selectSingleNode(l_DOM_node,'//Parameter');
-- get the current values in the XML document for Id and Result
l_Result_DOM_node := dbms_xslprocessor.selectSingleNode(l_DOM_node,'//Id');
l_value_Node := dbms_xmldom.getFirstChild(l_Result_DOM_node);
l_value := dbms_xmldom.getnodevalue(l_value_Node);
dbms_xmldom.writeToBuffer(l_Result_DOM_node, l_string);
dbms_output.put_line('2 ' || l_string || ' : ' || l_value);
l_Result_DOM_node := dbms_xslprocessor.selectSingleNode(l_DOM_node,'//Result');
l_value_Node := dbms_xmldom.getFirstChild(l_Result_DOM_node);
l_value := dbms_xmldom.getnodevalue(l_value_Node);
dbms_xmldom.writeToBuffer(l_Result_DOM_node, l_string);
dbms_output.put_line('3 ' || l_string || ' : ' || l_value);
-- create new Result node
l_new_DOM_node := dbms_xmldom.makenode(dbms_xmldom.createElement(l_DOM_doc, 'Result'));
dbms_xmldom.writeToBuffer(l_new_DOM_node, l_string);
dbms_output.put_line('4 New node : ' || l_string);
-- create a value for it
l_new_DOM_nodevalue := dbms_xmldom.makenode(dbms_xmldom.createtextnode(l_DOM_doc, 'SUCCESS'));
dbms_xmldom.writeToBuffer(l_new_DOM_nodevalue, l_string);
dbms_output.put_line('5 New node value : ' || l_string);
-- add the value to the new Result node
l_new_DOM_nodevalue := dbms_xmldom.appendchild(l_new_DOM_node, l_new_DOM_nodevalue);
dbms_xmldom.writeToBuffer(l_new_DOM_node, l_string);
dbms_output.put_line('6 New node : ' || l_string);
-- replace the old node with the new one
l_Result_DOM_node := dbms_xmldom.replaceChild(l_parameter_node, l_new_DOM_node, l_Result_DOM_node);
dbms_xmldom.writeToBuffer(l_parameter_node, l_string);
dbms_output.put_line('6 parameter node : ' || l_string);
dbms_xmldom.writeToBuffer(l_DOM_node, l_string);
dbms_output.put_line('7 Updated document ' || l_string);
dbms_xmldom.freeDocument(l_DOM_doc);
END ExtractXMLValues;
and the output...
1 <ParameterList xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Parameter>
<Id>1</Id>
<Result xsi:nil="true"/>
</Parameter>
</ParameterList>
2 <Id>1</Id> : 1
3 <Result xsi:nil="true"/> :
4 New node : <Result/>
5 New node value : SUCCESS
6 New node : <Result>SUCCESS</Result>
6 parameter node : <Parameter>
<Id>1</Id>
<Result>SUCCESS</Result>
</Parameter>
7 Updated document <ParameterList xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Parameter>
<Id>1</Id>
*<Result>SUCCESS</Result>*
</Parameter>
</ParameterList>
One question, why do the dbms_xmldom functions return the Old value? I was expecting the returned value to be the updated node.
Edited by: Lone voice on May 14, 2009 11:24 AM

Why does the App Store not work in Genius with VoiceOver switched on

After I downloaded IOS 6 to my iPhone 4 there were a lot of things not working properly, the main things that were a problem was the App Store, to move anything with VoiceOver switched on it was touch-and then tap twice also to move the thing on the page you use three fingers swipe up or down left or right to move it. We now find that to move something in Charts you only need one finger touchon the left to move it.If Some body can come up with thee answer it is the People that work in the Accessability side of things at Apple. So if you know in Ireland why Apple cannot put in the info for Accessability for People who are Blind like me we cannot see what is going on we do not change anyof the settings...

Thank you very much for the reply. That certainly makes sense, as I am sure it is all the Time Machine backups I have that are at the root of the problem. How can I update all those older version Apps deeply embedded within my TM backups, or is the solution to unmount my 2TB drive that I use for TM?
I suppose if Apple could somehow direct the App Store to disregard all those other apps in TM, the problem would be resolved.
 Nick Andriash 
17" MacBook Pro, 2.3GHz Intel Core i7, Memory 16 GB, OS X 10.8
AMD Radeon HD 6750M 1024 MB
iPad2 WiFi & 3G, 64GB
iPhone4S 32GB

How to search for a text node with a particular value in an xml document with labview

supposing i have the following xml document:
<head>
<book>
<bookname>zio</bookname>
<author>dan</author>
</book>
<book>
<bookname>the spear warrior</bookname>
<author>britney</author>
</book>
<book>
<bookname>the beard</bookname>
<author>derrick</author>
</book>
</head>
i want to search for the author of the book "the beard" using for example the V.I Get first match of labview to access the the node with value "the beard" and then use Get next sibling V.I and Get node text content to get get the author of this book..so my question is how do i write the xpath expression for Get first match so as to access the node with bookname "the beard" instantyly? am trying to minimise the use of loops because they increase the time duration,..thank you (NB:i dont want to use Get all Matched V.I because it obliges me to use a loop in order to access the name derrick and this increases the time duration for my v.i)
Solved!
Go to Solution.

Since it's all text, why not use a real quick Match Pattern (or Regular Expression, but you don't need that much power here), see attached.
Cameron
To err is human, but to really foul it up requires a computer.
The optimist believes we are in the best of all possible worlds - the pessimist fears this is true.
Profanity is the one language all programmers know best.
An expert is someone who has made all the possible mistakes.
To learn something about LabVIEW at no extra cost, work the online LabVIEW tutorial(s):
LabVIEW Unit 1 - Getting Started
Learn to Use LabVIEW with MyDAQ
Attachments:
Two-stage match demo.vi ‏8 KB

My ipod touch will not switch on and is no longer recognised by itunes. Before this i tried to restore it as I was having some problems with it switching off and on by itself randomly.

My ipod touch will not switch on and is no longer recognized by itunes. Before this i tried to restore it as I was having some problems with it switching off and on by itself randomly.
I tried to restore it and I got error code 2009, so I closed it tried again got error code 1659, now it wont do anything and it's not recognized by my pc /itunes please help x

For the restore error messages try:
iTunes: Specific update-and-restore error messages and advanced troubleshooting

3 Nodes with transport Switches

Similar Messages

Maybe you are looking for