3 or more clips on screen?

I understand how to create a split screen, or picture in picture, etc in iMovie 11.
Is it possible to put 2 movies within a third - so one main video, with 2 smaller (picture in picture) videos also running within it?
So for example, I may want one video running, with another video in each of the bottom corners etc.
Also, it is possible to do a 3 way split screen with different clips in each section?
Thanks

Just had a thought, is the best way to do this to do a single PIP and export the movie at its highest settings, then re-import the movie and add the next PIP, thus ending up with 2 (or more) PIP effects?

Similar Messages

  • Clip inspector in imovie not working properly - when I select a picture - and select clip adjustment it tells me that I need to select one or more clips to view Inspector tools and in a clip the audio adjustment only shows a speaker? help

    Clip inspector in imovie not working properly - when I select a picture (in project library) - and select clip adjustment it tells me that I need to select one or more clips to view Inspector tools and when I select a movie clip and then click on audio adjustments the audio adjustment appears as a speaker icon and I don't know how to get to the various audio options? It was working fine one minute and then I seemed to lose the functionality. Also editing a photo in a photo or getting rid of ken burns effect etc does not seem to work. help

    Can anyone shed any light on this as I am having the same problem? One minute it works fine, the next you get the error message above.
    Many thanks.

  • Work on more clips at the same time (premiere elements 11)

    Question: is het possible to change the colour / ad the tool videostabilisation on 2 or more clips at the same time?

    Gentlemen,
    I will try to explain what happened to me when I tried to paste effects.
    I copied the keyframe effects from the first clip, (selected the clip, right click, copy)  Then selected the target clip and didn't pay attention to the postion of the timeline indicator which was about 1/3 of the way into it.
    Subsequently, when I then selected "paste effects and adjustments" to this target clip, it did so, but the effects then began at that point where the timeline indicator was at.
    So for a timing eg:  Say the both clips are 10 seconds long with all the effects at the beginning within the first 5 seconds.
    The indicatior was at about the 4 second mark in the target clip when pasting and that's where the 5 seconds of effects from the first clip started.  (about 4 seconds in)
    Since I didn't know about the shift key technique, I just discovered that moving the timeline indicator to the beginning of the target clip (first frame) and re-do the procedure, it resulted in the correct position and timing etc.

  • Can not have more than one screen open at a time PLEASE HELP

    some how I've made it so when I open more than one application or screen the current one open goes off the screen to the left. Can someone help so that I can again have more than on screen open at a time. Thank You in advance for your courtesy

    Hello LUCID MIND,
    And welcome to Apple Discussions!
    Do you have Spaces turned on within *System Preferences*?
    B-rock

  • N8 - more clip art please?

    Anyone aware of any apps that add more clip art to the existing photo editing software?
    Thanks!
    V
    Nokia 3395
    Nokia 6600
    Nokia N95 8GB
    Nokia N8 (Anna)
    Nokia Lumia 930

    Hi Hunt,
    I guess I was wondering if the PrE9/10 clip art is actually installed on the hard drive or embedded into a DLL library and one can only see it within the program, then export it.
    SORRY.... I JUST FOUND IT ON MY HD..... it's PNG FORMAT....   no problem.
    thanks...
    cheerio,
    Petey

  • 1)  More clip art?  2) Do plug-ins work in CS55?

    1) Is there more clip art or is it the same batch that was in PrE9?
    2) Does the 64-bit version have 64 bit plug-ins that will work in PrPro CS55?
    cheers,
    Petey

    Hi Hunt,
    I guess I was wondering if the PrE9/10 clip art is actually installed on the hard drive or embedded into a DLL library and one can only see it within the program, then export it.
    SORRY.... I JUST FOUND IT ON MY HD..... it's PNG FORMAT....   no problem.
    thanks...
    cheerio,
    Petey

  • Is the MacBook Pro Retina display resolution of 2880-by-1800 a strain on the eyes as I understand the higher the resolution the more strainful the screen can be to the eyes?

    Is the MacBook Pro Retina display resolution of 2880-by-1800 a strain on the eyes as I understand the higher the resolution the more strainful the screen can be to the eyes?

    vinay.sujan wrote:
    Is the MacBook Pro Retina display resolution of 2880-by-1800 a strain on the eyes as I understand the higher the resolution the more strainful the screen can be to the eyes?
    Well there are two or three causes of eyestrain with displays different people seem to have.
    1: Small type/UI elements
    2: Glossy screens
    3: Flicker rate
    1:
    The higher pixel rate combined with the display set at the higher resolution is going to cause UI and type to be smaller and harder to see. In fact it's advised to set OS X to a lower resolouton so it upscales better to match the pixel of the higher display.
    Reports coming in say watching HD 1920 x 1080 trailers on the anti-glare 17" is best as the pixel content matches the display almost fullscreen, where on the MBP-R it's upscaled and thus looks blurry.
    HD content makers are NOT going to change all their video cameras to support 2880 x 1800 full screen, so in order to get a clearer image playing HD 1080 content, one will have to do so in a smaller window.
    2:
    The new MBP-R dispalys are 75% less glossy, but not 100% less glossy like the anti-glare models so this can still cause some people problems. This can be lowered to under 1%, however I'm suspecting to do so would be considered giving up a military advantage to China where Apple gets it products made.
    3:
    I don't know about the flicker rate if it's better or not on the MBP-R's than the previous screens.

  • Editing two or more clips at once

    How can you edit 2 or more clips at the same time? I have a lot of clips on one timeline that I would like to add motion (change scale) at one time. Is there a way to do this?
    Thanks!
    iMac   Mac OS X (10.3.7)  

    Yes. Copy a clip that has the attibutes you desire to be placed on the other clips.
    Choose one or more clips in the Timeline, right click and select Paste Attributes.
    Choose the attributes you want to paste from the lists.
    In your case Basic Motion.
    Al

  • Clips splitting when adding more clips

    i have one main movie in my project and then I'm adding more clips on top of it on other video tracks.
    the only problem is, whenever i do that, my main clips splits into two, right in the place where i'm adding a new clip. is there any way to disable that?

    sounds like you are insert editing the new clips and you want to do an overwrite edit.
    if you are doing it by drag and drop, take note of an arrow that appears when you drag the clip to the timeline. if you hover the mouse in the top third of the clip you are editing to, the arrow will point right - meaning it will 'insert' the new clip, and therefore move everything to accommodate. If you hover the mouse in the bottom two thirds, you will see the arrow point down - this means it will be an overwrite edit, and it won't move the other clips..
    cheers
    hugh

  • Warp stabilizer crops clip off screen - help!

    Adobe Premiere Pro CC - most current update.
    When I apply the Warp Stabilizer effect, it crops/moves the clip almost completely off screen in the preview window. It also remains this way when I export.
    I am uploading dslr footage with these properties:
    File Path: /Users/Braedin/Desktop/Banff trip/Friday/MVI_9850.MOV
    Type: MPEG Movie
    File Size: 52.5 MB
    Image Size: 1280 x 720
    Frame Rate: 59.94
    Source Audio Format: 48000 Hz - 16 bit - Stereo
    Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
    Total Duration: 00:00:10:03
    Pixel Aspect Ratio: 1.0
    I then slow down footage to 40% to a 24fps look (orginally 60fps)
    I then "Nest" the footage to be able to apply the Warp Stabilizer effect.
    This is what it looks like without applying warp stabilizer:
    This is what is looks like after applying warp stabilizer and rendering the clip:
    These are the properties of the "Nested" clip with Warp Stabilizer:
    Nested Sequence 03
    1280 x 720
    00;00;04;22, 59.94 fps
    48000 Hz - Stereo
    Finally, here are my current Sequence Settings in which I am having the issue:
    Any help would be greatly appreciated as I suspect its an issue with sequence setting.
    Thanks,
    Braedin

    If you have a Retina Macbook Pro you can download the latest NVIDIA drivers from their website, which will enable you to use CUDA GPU acceleration in Premiere Pro, which fixed the problem for me, and is faster to render etc than Software Only.
    More info at this link, which also contains a link to the NVIDIA drivers:
    Enabling CUDA for Premiere Pro and After Effects in the MacBook Pro Retina

  • Upgraded to iOS 6 and now I can't open anything in the kindle app? I have to say that I have had my ipad3 for 6 months and intensely dislike the problems with using it. Also is there any way of opening more than one screen as it is hopeless otherwise?

    I Have had my iPad for 6 months as I cannot access my work emails using windows. I have to say that it is the most unhelpful device I have ever used and although it looks like there isn't an answer for some of the questions I have asked below, I thought I would try!
    1) I have upgraded to ios6 and the kindle app will open but crashes and disappears when I try to access a book?
    2) is there any way I can open more than one page at a time, as opening one at a time is hopeless?
    3) Is there any way you can replicate the right click function on word? As pasting and copying on the iPad is irritating to say the least!
    4) why can't my Samsung 11 phone connect to my iPad via Bluetooth? A they can't seem to 'see' each other? I may have turned a setting off when I was recently abroad and didn't want huge roaming charges.
    5) Why do the submit buttons on some websites not work and how can I get them to? I never have a problem with windows, but it is often a problem with the iPad.
    6) I have several websites which I have built and usually upgrade on the windows desktop, usually through Internet explorer, but I can't access the sites properly on the iPad (I can see them but can't alter them) and when sending emails through the websites they won't show the page and I can't navigate the page (the size of the email page is bigger than the iPad screen, but I can't either shrink the page to size or move the page around as you normally would on the pad, any ideas?
    7) finally, when roaming abroad recently, I had no problems using the wifi, but when trying to use the cellular data (using the roaming function) I could not get it to work? The ipad seemed to be connected to the network with no problems, but wouldn't actually update the emails? I tried turning it on and off, but that didn't make a difference. My kindle and mobile phone (both also on 3G ) worked great, it was just (as usual) the ipad playing up.
    8) when wanting to alter part of a sentence, I can't always get the cursor in the right place? Sometimes it is simple the wrong line, but often it will only go at the end or start of a word and not where I want it. Is there any way of making it more exact? Again I never have a problem with moving the cursor on windows, either by mouse or on the touch screen function on windows 7. Any ideas? As after pressing the screen multiple times I just want to throw it out of the window!
    IT might just be that I don't have the correct settings (I am a technophobe) but I absolutely hate the iPad and only have it for work emails, it is so annoying that I can get my mobile phone and kindle3g to work fine, but always have problems with the iPad. I am sure it could be good (and for reading emails on the go in the uk it is great, as I like the key board) but it just seems to make everything else difficult.
    i Hope you can help and sorry for asking questions others have, but I am just hoping that something new might have been developed!
    thanks,
    K
    Message was edited by: K Paton

    1) I have upgraded to ios6 and the kindle app will open but crashes and disappears when I try to access a book?
    Try rebooting your iPad, that should fix he issue. I that doesn't work, delete the app and re-download it.  The Kindle books should all be in he Kindle cloud services and you can get them again. I have an iPad2 w/ Kindle app and it works just fine - no issues.
    2) is there any way I can open more than one page at a time, as opening one at a time is hopeless?
    Page as in a kindle book way? turn iPad to landscape position from portrait position. If, however, you mean open more than one application at a time, then no. And not hopeless, as it takes a bit of time to get used to, going from a desktop/laptop format to tablet format.
    3) Is there any way you can replicate the right click function on word? As pasting and copying on the iPad is irritating to say the least!
    It's actually fairly easy. Press down on the word, then you can expand by drawing your finger to cover word/sentence/paragraph/page, hit select or select all then it gives you the option to cut, copy, paste, define. If you want to use a word processing app on the iPad, Pages is a good application.
    4) why can't my Samsung 11 phone connect to my iPad via Bluetooth? A they can't seem to 'see' each other? I may have turned a setting off when I was recently abroad and didn't want huge roaming charges.
    It's the connection on your phone. Samsung Galaxy SII? Android software?  What you have to do is go to the phone's settings and connect via wireless, not Bluetooth. Go to System Settings (on phone) and under Wireless and Networks click 'more' and go to the Tethering and Portable Hotspot option. Set up your mobile wifi hotspot,  name it though it will probably come up with 'AndroidAP', choose a WPA2 security level and put in a password. Go back to previous screen and turn on 'Portable Wi-Fi Hotspot' box. Then on your iPad in the Settings - Wi-Fi section, it should then recognize your phone for tethering. If it's a Windows Phone 7,  I don't know the layout of that software, but presumeably similar.
    5) Why do the submit buttons on some websites not work and how can I get them to? I never have a problem with windows, but it is often a problem with the iPad.
    Sometimes the issue is with the website design, not all websites are optimized for mobile devices - not just iPad but also Android devices. It happens. They're getting there, but occasionally the page might need a refresh.
    6) I have several websites which I have built and usually upgrade on the windows desktop, usually through Internet explorer, but I can't access the sites properly on the iPad (I can see them but can't alter them) and when sending emails through the websites they won't show the page and I can't navigate the page (the size of the email page is bigger than the iPad screen, but I can't either shrink the page to size or move the page around as you normally would on the pad, any ideas?
    It depends on what you use to build the websites on the computer. Recommend a free program on the computer called CoffeeCup Free HTML Editor. I don't recommend using IE period; Firefox or Chrome are my choices on Windows machines. I have two websites that I manage, both using this program. I'm assuming that when you mean you can't access the sites on the iPad you mean to update them? Ostensible there are apps to let you do this. What format are the sites? Without seeing what exactly you mean and what you want to do, it's hard to explain.
    As for seeing full page while emailing within a site, turn iPad to portrait mode, and try to finger-pinch touch the screen to see if that will bring the fuller page  into view. Other option is opening a second tab with same website and just go between tabs to reference material.
    7) finally, when roaming abroad recently, I had no problems using the wifi, but when trying to use the cellular data (using the roaming function) I could not get it to work? The ipad seemed to be connected to the network with no problems, but wouldn't actually update the emails? I tried turning it on and off, but that didn't make a difference. My kindle and mobile phone (both also on 3G ) worked great, it was just (as usual) the ipad playing up.
    If you were outside the US or Canada, my guess is the problem lies within the SIM card in your iPad. If you were outside North America, there are different band levels - I'm guessing you have a SIM thats locked to a particular provider. Band level frequencies differ per country/continent, so a SIM card that will work in Canada/US will not likely work in UK/Europe/Asia/Australia, etc. you will be able to get your emails again when back on a wifi network. Mobile phone may have a different type SIM card (GSM/HSPA) from your iPad SIM. Also, check your email settings.
    8) when wanting to alter part of a sentence, I can't always get the cursor in the right place? Sometimes it is simple the wrong line, but often it will only go at the end or start of a word and not where I want it. Is there any way of making it more exact? Again I never have a problem with moving the cursor on windows, either by mouse or on the touch screen function on windows 7. Any ideas? As after pressing the screen multiple times I just want to throw it out of the window!
    Moving the cursor on a sentence is a matter of putting your finger on the screen where you want it. It's exceptionally easy to do. I'm using the Notes app to write this whole segment and I just need to put my finger where I want to change things and presto it's ready for me to change where I want it.
    Here's a solution: sell your iPad (after you wipe your data off it) to someone who will appreciate it, and put your money towards the Windows Surface Tablet out later this year/early next year, where you can (reportedly) connect a mouse to it. It will have some of the Windows 7/8 functionality that you're more familiar with, or get a netbook.
    - Ceridwyn2

  • I cannot run You Tube Videos on my Apple Macbook Air MD760HN/B with OS X 10.9.4. the video window displays a message " An error occurred, Please try again later." Learn more. The screen is black with this message. There appears to be some setting problem?

    Macbook Air MD 760HN/B with OS X 10.9.4
    4 GB RAM, 1.4 Ghz intel Core i5
    Problem 1
    I.     On Youtube whenever I try to play a video, I get a message on a black screen "An Error Occurred, Please Try Again later. Learn More."
    2.   I think it is some setting problem, being a new mac user, I am unable to sort it out.
    Problem 2.
    How to select more than one file in a folder to copy or delete. like it can be done in Windows with shift Click together.
    if one has to select say, file 25 to file 37 in a folder with 75 files. select all (command A) works but I cannot select few continuous files.

    Macbook Air MD 760HN/B with OS X 10.9.4
    4 GB RAM, 1.4 Ghz intel Core i5
    Problem 1
    I.     On Youtube whenever I try to play a video, I get a message on a black screen "An Error Occurred, Please Try Again later. Learn More."
    2.   I think it is some setting problem, being a new mac user, I am unable to sort it out.
    Problem 2.
    How to select more than one file in a folder to copy or delete. like it can be done in Windows with shift Click together.
    if one has to select say, file 25 to file 37 in a folder with 75 files. select all (command A) works but I cannot select few continuous files.

  • How to get more independent of screen resolution

    Read already a number of topics about this in this forum. But I still wonder
    how to set up ones Swing components for different screen resolutions. What
    I did up to now is checking for the current screenwidth and setting sizes for
    each resolution. Worked OK. But nowadays there are so many different
    screen sizes, this is getting too complex.
    I mean, one has to set the component's size, its location, the fonts used,
    possible Icons in the Toolbar, the size of the components internal panels,
    the insets, border sizes, and many other things. So, assuming ones window
    with all the components looks great in one resolution, the developer still has
    to check whether it all looks so great as well in any other thinkable screen
    resolution. Even in those which the developer isn't even able to create using
    his graphics card.
    So, my question is: Is there somewhere a clever tool inside Java which makes
    the total layout of components and their sizes inside the user's main window
    more independent of the screen resolution?
    For instance, it would be great to be able to define the component's size,
    location, and so on, using the actual size it should appear on any screen.

    You are right. For those using advanced high resolution
    monitors, this will be a disadvantage. However, I'm quite
    sure, the average user I'm aiming for, still uses rather
    standard type of monitors. Of, course, in the (near?)
    future, everybody may be using high resolution (same
    progress as with our tv-screens). So I may have to include
    these screen sizes as well later.
    Your presentation made me aware of the great need for
    everybody in the graphics business for a solution for this.
    Still think, this can be automated in a not too difficult way.
    I mean, if I can hard code this in such a way, that nobody
    is able to see the difference of the program running on a
    different resolution, it must be possible to include an
    option in whatever programming language, to create ones
    graphics components in a resolution independent way.
    At least, I think. May be a good starting point for my next
    project.
    Thanks anyway for your help an remark. I think you still
    deserve your dukes. Here they are.

  • Linking three or more clips with transitions in FCP7

    I am cutting my first lengthy FCP7 project from 15 minutes down to ten.
    There are a few segments of this video which I would like to keep together -- link. None of these clips in these segments are linked together at all (no underlines).
    However, I discover when I use the Command key and darken the two videoclips, the transition between them, and the audio clips that goes underneath all that, the Link function under Modify is greyed out. There's no way to treat these two video clips with transition along with the audio I set under it as a unit.
    Am I doing this wrong or is there a workaround when I want to link multiple clips (i.e. three or more) together, even if it includes a transition between the video clips?
    THANKS.

    Two ways come to mind ... #1  Nest the clips - select (highlight) the clips in the Timeline, then go to Sequence->Nest Items.
    #2  Set an IN and OUT point for the parts you want to combine, then export a self-contained movie.  Import the resulting file into your project and use it to replace the original individual clips .
    -DH

  • PRE9: How to split one clip into two (or more) clips?

    I can't believe this is so hard to do... But HOW?

    You don't necessarily need to separate the file into individual clips.  When you do a cut on the timeline, this is a virtual cut, leaving the original file untouched but determining what will appear in the output.  You can split the clip into multiple pieces, delete the bits you don't want, add transitions, insert new bits, whatever you want, all without affecting the original file in any way.  Once you're happy, you output a new file using the Share options, and you get a new video file, with your original files still untouched.
    If you want to split your file into multiple individual files, you can use the sliders on the time scale, and export (Share) using the Share Work Area Only checkbox.  If you're doing this for purposes of reassembly, it would be better to save the individual clips in as lossless a format as possible, the default AVI format taking considerably more space but not losing quality.  Hint: the sliders can be positioned to the time marker using Alt-[ and Alt-].  Once you've done this, note that your original file will still be there, untouched.
    There is also VideoRedo Plus, a cheap program which gives frame-accurate selection and allows rapid subdivision of a piece of footage.  It doesn't re-render as PE9 would (this is where loss of image quality creeps in using compressed formats such as MPEG), copying the original frames.  You can then reassemble the bits using your video editor.

Maybe you are looking for

  • Calendar Month View won't scroll up and down

    This is a very minor, but strange issue with Calendar. I can scroll up and down in Calendar month view on my MacBook Air, but on my Mac Pro, I can only switch months by clicking the" >" button or "Command+Left Arrow". Anyone know why? Thanks.

  • Need to turn off the iCloud services

    I no longer have the iPhone 4s. Now I cannot receive text messages from other iPhone users on my new cell phone. I need to turn off iMessage.

  • Final cut pro x and native instrument fm8?

    how do i resolve this? it is irritating ....it was good on maverick...not yosemite...

  • The another thing about the new version

    Since the day I installed 3.2.100 version, I can't get rid of this error. what should I do? ( I'm using blutooth conection if it matters..)

  • Xmlparserv2.jar with xerces and xalan

    Hello, I have a Spring/Spring Web Flow application. I also have a separate web application that's using the XML Publisher API to generate reports from RTF files. I am now in the process of merging these two into one application. The Spring app requir