3 Question,Can use a wireless bluethoot mouse on my ipad2? My picture quality is bad,whats do i do?How does air printer works?
Thanks.
yes diavonex is right there is no mouse for ipad but u can use bluetooth keyboard
as may it comes some mouse functions.
thx
warm regards
Similar Messages
-
hello I wanted to know if I can use my wireless mouse with my iPad 2 . Just curious.?
Yes, you can pair up your wireless Bluetooth mouse as well. Most people find that using the iPad touch screen is easier,however.
-
I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem
i try to download now, do you think when i download and install the windows support software, can i fix the problem?
-
My Ipad did work on my wireless at home and works on other wireless but no longer at home. My IPhone works at home and others can use the wireless> Confused that it did work and now does not?
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
Cheers, Tom -
How can use my Wireless Location Appliance to work with RF ID's?
How can use my Wireless Location Appliance to work with RF ID's for Asset Tagging.
It seems Smartcard used for ID cards have a small RF ID, can I use this for Asset Tagging?
Thanks in AdvanceThere are two kinds of RFID tags: Active tags, which have a battery or other internal power source, and passive tags, which have no power source and work by reflecting the energy from an RFID scanner (basically). At the energy levels and distances used for WiFi location detection, passive tags will not return a detectable signal.
Take a look at http://www.aeroscout.com/ for more info on WiFi RFID tagging. -
I added photos of our company's products to the Goods App for our sales team to use as an electronic catalog. Some of the pictures display perfectly. Others are blury. How can I fix this? I Googled pixel size for Ipads and checked this size against the blury photos. They seem to be less than the max pixels allowed. Must be another solution????
Ged,
whilst generally I agree with you a question (or two) for clarification so we can be sure we're not comparing apples with oranges
I'm not familiar with O2's product lineup but given you're on Annex M is that a business package?
Are you on an Infinity residential or business package?
On the subject of the offshore support teams my experience from the other sife of the fence is that many, many of them are very technically orientated. The problem is that the ISPs they work for don't give them access to many of the tools that are needed (they need to raise internal requests to even get line checks done in some cases) and also they are very heavily scripted & monitored in what they do/say on a call.
Sounds like O2 are operating as a contact centre rather than as a call centre which is much more preferable from the customers point of view.
DISCLAIMER: although I work in the industry I do not work for BT and any opinions given are purely my own. -
Can't activate the location service on my ipad2 after upgrading to ISO7! What's wrong? Doesn't worked with the resets!!!! Can someone help please?
Hello I found my answer on Settings>>Restritions! :)
Thanks to me:) -
How does one print single photos using iPhoto. I keep getting an error message:No Available Themes
You need to reinstall iPhoto. To reinstall iPhoto delete the current application and, on all Macs with Snow Leopard or earlier installed, all files with "iPhoto" in the file name with either a .PKG or .BOM extension that reside in the:
HD/Library/Receipts folder (10.5 and earlier)
or from the /var/db/receipts/ folder (10.6) .
Deleting receipts is not necessary if your Mac came with Lion or later preinstalled.
Then install iPhoto from the source it came from originally.
OT -
How does time machine work when being used with a mac pro?
How does time machine work when backing up a mac pro?
Considering the fact that the mac pro can hold 8TB and a external (non NAS) hard drive can hold only 2TB does time machine only backup the OS disk.macnewcomer22 wrote:
Considering the fact that the mac pro can hold 8TB and a external (non NAS) hard drive can hold only 2TB does time machine only backup the OS disk.
Time Machine will backup everything by default, on every disk in your Mac.
Choose System Preferences > Options to exclude items. You could exclude everything except your OS...but I'd think it is your data that's more important to you, if you have to make choices.
See...
http://discussions.apple.com/thread.jspa?threadID=1964018
While it's true you can store almost 8TB, how much do you think you'll actually store? If you have 1TB of data you want to store then a 2TB drive can do it. Also when your TM drive begins to get full it will begin deleting the oldest backups to make room.
You could also get a Drobo with 8 bays...
http://www.drobo.com/products/index.php
-mj -
How do i make it happen so I can use two seperate iMac computers as one set-up with one keyboard and one mouse?
If the keyboard and mouse are wired, then a USB KVM switch will work.
If they are wireless, you should be able to connect the wirelessly via Bluetooth settings. discover the same keyboard and mouse on each iMac.
However, you cannot use them on each iMac simultaneously. I think it would be rather difficult for you to switch between them (disconnecting and reconnecting them over and over again).
Most iMacs come shipped with a keyboard and mouse by default. How come you only have one keyboard?
Keyboards and mice are not that expensive either. -
I Am Using Photoshop CS5 - I Used To Be Able To Open Multiple Single Files - Now They Just Overlap As One File ! - How Can I Fix This Or Reboot My App To My Original Settings ?
In Preferences UNcheck Open Documents as Tabs
-
Can't get wireless keyboard to pair with iPad2
Just got my keyboard tonight and can't get it to pair with my iPad2. Tried several times and even changed batteries. Any suggestions?
Is the blue tooth turned on?
Settings, general and bluetooth.
Once that is turned on it should look for devices around. Follow the instructions on your keyboard to put it into discoverable mode and see if the iPad sees it.
I'm presuming it's a bluetooth keyboard. -
I have a 27" iMac, and am considering a MacBook Air: one consideration in choosing the MBA (which has a smaller screen that I would choose) is that if i can use the iMac at home as ext displaym then I can live when travelling with the smaller MBA display (vs. a 15" MBP).
However, when I hook the MBA to the iMac, how do I toggle the iMac display between iMAc and the MBA?
Also, does hooking them up via MiniDP mean that the iMac keyboard and mouse will control the MBA? Or will I need to sit at my desk with two of each?
ThanksRichard Kelly2 wrote:
However, when I hook the MBA to the iMac, how do I toggle the iMac display between iMAc and the MBA?
Type ⌘ F2
Also, does hooking them up via MiniDP mean that the iMac keyboard and mouse will control the MBA? Or will I need to sit at my desk with two of each?
You can keep your MacBook Air open and use the iMac as display #2. You will use the MacBook Air's keyboard and trackpad (or mouse) to control the machine.
You can keep the MacBook Air plugged in and closed, connect an external keyboard and external mouse/trackpad and run the MacBook Air in "closed clamshell" mode. http://support.apple.com/kb/ht3131?viewlocale=en_US
The hardest part is finding a mini display port to mini display port cable. In theory, you may be able to use the iMac's video and audio with a MacBook Air. No guarantees on that. You will need the latest spec on the cable and just finding a cable may be a challenge. -
I get a notice when trying to sync my iPad. "this iPad cannot be used because the Apple Mobile Device Service is not started".....What is this and how can I fix it? Help please
Here is a YouTube video which should guide you through a solution: http://www.youtube.com/watch?v=VLFAo-FWLxE
-
Received a Pages attachment in email, but can't open it. Error message says it's missing an "index.mlx" -- any idea what that is and how I can open the file?
Many thanks ... after many trials and effort, the sender admitted he doesn't know what he did - he's new to Apple - so guess he'll have to get some training!
Maybe you are looking for
-
So. What U want more ?
-
Lock types in oracle 10g with sql examples
can some body easily in simple words tell some thing about the table locks types in oracle 10g with some sql examples?
-
Does anyone know if there will be a version of XSU for C++? I want to insert/delete/update records in a database, given a XML document from a C++ program. Do I have any other options if I cannot use the current version of XSU? Thanks, Jon Shuler
-
How can I uploaded a picture to my profile
I hit the blank picture thin on my profile n it didn't do nothin
-
Hi, i have taken full backup of database using rman. now i have added one more datafile to database, so when i added datafile to database i need to take fresh backup. so i delete all the backups and unregistered database and registered it again. when