[3 Questions from a fresh guy~]

I down load a Flash cs5.5 , but i am out of practice.. so i came here, hope someone could give me answere~~~
1.How to drag the Mp3 file to the time line...?
2.How to make the image to the every frame page (this is very imporyant for me!)
3.How to add the tramsition effect into every page..?? (i just wanna know if flas cs5 bring filter by itself??
ok, just those three question, hop some one could find it, tell me....please~

Shelly Friedman1 wrote:
First -- and most important -- I can't seem to figure out how to have downloaded or synced movies reside on the Apple TV but not on my Mac's iTunes library (I specifically bought the 160 GB version because I wanted to use the Apple TV to store movies, and save space on my Mac). But it seems that the Apple TV can only retain items that are synced from iTunes, and if I remove that item from iTunes, it disappears from the Apple TV as well. Am I missing something here?
You are not missing anything, this is how it is supposed to work. You wouldn't really just want content on your tv, it's simply too vulnerable. I'd suggest you invest in an external drive, two in fact because you would want to back up the content on the first, would you not. There is a workaround to this although I don't really recommend it. ...... Read THIS and THIS
Second, when I synced my music videos from iTunes to the Apple TV, at least half of them (mostly downloaded from YouTube) play the audio, but show no video (I don't think it's a YouTube thing, though, because other YouTube music videos play fine on the Apple TV. Any ideas?
Difficult to say without knowing more about the videos. ...See This
And third, before I did the software update, the Apple TV turned off by holding down the "Pause/Play" button on the remote for a few seconds. After the update, it doesn't turn off from the remote. It does, however, seem to turn off by selecting the "Standby" mode from the Settings. Is this correct?
Sort of, it will still turn off using the prescribed combination of remote buttons but you now have to be on the main menu screen to do this.

Similar Messages

A few 8100 questions from a new guy.

I just purchased a used 8100, and have a couple of questions.
Is there anyway I lock just the message application, instead of the whole phone?
Also, when I tried to set up my E-mail it said that there was already a different account for this pin number. What can I do to reset that and set up my own?

In BlackBerry there is no option to separately lock one single application. You can think of any 3rd party apps for this.
As you purchased an used device you need to collect the user name and password for Email setting apps from the original owner. Your carrier might not help you as this will violate the original user rights. If the original owner forgets the password as well then ask him to call his carrier and identify himself and make it unlocked for you.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Basic Question from a new guy

Earlier question by me brought a response from Priya (thanks Priya) that I should post the results of querying my lsnrctl settings.
How?
I can run the query from DOS and get a pretty impressive output, but how do I save the output and then incorporte into a message such as this?
thanks
frank

Hi ,
It's simple ...
Just riht click and select "Mark". Then press <Ctrl>+<C> and then <Ctrl>+<V> here to paste it.....
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Pr
ction
Start Date                17-╓┼┬ -2007 16:25:16
Uptime                    0 days 1 hr. 52 min. 34 sec
Trace Level               offRegards,
Simon

Several Questions From New-Old Guy

Hi--
I'm about to buy some gear and I'd like some advice. Until around 2000, I was very active in computer-based sequencing and audio (I was a beta tester for Opcode, fer crissake), but I became more involved in live playing and I,well, stopped buying stuff. Everything,pretty much, needs to be replaced. I'm going to buy a Macbook, so my first question is: What makes the Macbook pro a good investment, aside from screen size, over a garden variety Macbook? I'm trying to keep the whole package as far under $2000 as possible
A little more about what I'm going to be doing, at least initially. I'd like to do relatively simple, live sounding sequenced rhythm tracks for my guitar and vocals, both for recording and live performance. I play acoustic and electric guitar, and will be doing sequencing with a Yamaha G-50 midi guitar interface. I'm very experienced with these types of units, so you don't have to warn me about them, I know the pitfalls--unless there's something better out there that I'm not aware of. Most of my material is jazz inflected singer-songwriter stuff,but the guitar playing is pretty advanced for the genre.
Logic Express or Logic studio? Will Mainstage be a large plus for live performance? Can I use vocal and guitar effects live while running a sequence just using Express? Can I play midi guitar, effected guitar & vocals simultaneously live? How much RAM will this require?
USB or Firewire interface? For the most part I won't need to record more than 2 channels at once, though I may expand later. Most of the small interfaces are so cheap that I'm not really worried about picking the wrong one, but I will need midi input. What's the best ca.$200 interface, and what are the pros & cons of Firewire vs. USB?
Is Craigslist a good idea if I decide to buy used?
Thanks a lot.
Clint

Opcode eh? Who are they..?
(just kidding!
A MBP will hold it's resale value longer, it has FW400 and FW800 ports for high bandwidth options (such as audio), it has a card slot for ESATA drives or UAD Xpanders, it has a larger screen size (13in on the MB is cramped for pro work), it has a dedicated graphics card (the MB shares the system RAM), and more ports in general.
Plenty of reasons why the MBP is a better machine for pro work - there are others too.
Always get FW interfaces / drives for audio work. Leave USB for mice and dongles etc - it has really bad performance for things like audio.
You can probably fulfill your requirements with Express, if the cost is an issue. Logic Studio has some advantages, especially in terms of core content and other utilties/plugins, but Logic Express is nearly Logic Pro these days.

HT201272 I have recently picked up an Apple TV. When I go to the movies tab, there are less movies available there than there are in my i-Tunes account. I've done some looking around at questions from others, but haven't found an answer that works for me.

I have recently picked up an Apple TV. When I go to the movies tab, there less movies available there than what is available in my i-Tunes library. I have 38 movies showing in my library but only 23 are showing in the Movies tab on the Apple TV. After researching this a little, there are only 23 movies showing under Purchased in the Quicklinks of my i-Tunes account. The majority of my collection are digital copy downloads that came from DVD purchases. Some of the missing movies were added in the past couple of months, the rest are a year-or-so old. I have done some looking around at questions from others, but I have not found an answer that will fix my situation. How do I update my library to get ALL of my movies to reflect that they were "Purchased"(as it says they were in their Properties)?

Biggles Lamb wrote:
Chill out guys, getting personal will never ever change another persons view, right or wrong, they are entitled to them .
The pros and cons of to CC or not to CC have been done to death
Its a fact the CC model will work for some, especially newbies and small businesses.
The risks associated with the CC model have been well documented.
For long term users of CS perpetuals its generally a large hike up in cost compared to the upgrade system.
Then there are the....... Adobe can rot it hell...... group who will never subscribe
To each their own, you do the math to suit your cashflow whatever that is and then make an informed decision
To those on the CC model, I'd like to offer some practical advice.........do not allow automatic updates.........make regular backups............develop an exit strategy of alternatives for when you can no longer afford the subscription costs............never ever assume that the Adobe update is bug free
Enjoy your cloud
Col
Thank you for that post, and the advice. I just happen to be one of those who it does work for. I've been around long enough to know that CC isn't going to work for everyone(the large publishing/radio/web company I work for isn't upgrading to CC because of the costs involved). But it does for me as I potentially venture out into the full-time freelancing world and away from the more structured big office environment. I can't make decisions based on what is best for anyone else, or what will hurt or help Adobe. Just what affects me, and that's all.
Brent

Question from a Newbie wireless user

Please excuse the naivete of this question. I'm completely ignorant on everything pertaining to wireless internet. My old Powerbook 400mHz G4 Titanium has never had wireless of any kind until this week when I bought a PCMCIA wireless adapter. Never used wireless, don't know anything about it.
I started following the instructions on the PCM adapter this morning to get it all set up. I plan to toggle back and forth between wired internet at home and the wireless adapter when I'm out on the road.
I was surprised when I saw the window where I enter my settings that there were no less than ten different internet services flying around the room in my house! I guess I have a lot of wireless neighbors and I could easily access their bandwidth.
I imagine the same would go when I'm in town sitting in the library. They welcome you to use their internet access, but it's in a busy end of town and I'm sure I'll see numerous services available there too.
So I'm clueless on this topic. Again, I've never used wireless internet before - but I've read about these guys who've been arrested in front of coffee houses for stealing bandwidth at WiFi hotspots when they weren't paying customers.
What's the deal with sitting in your living room and using your neighbor's internet access? I know it's not ethical and we should all get our own, but what are legalities? And say I hopped on to someone's internet access +quite accidentally+...how does one get caught if you do it quietly? And have people actually gotten into trouble beyond these two guys that made national news?
I guess my main question is exactly how careful do I need to be to set the correct access service when there are ten immediately available in a public place? Can I just click on whatever signal is strongest and log on without fear of being caught?
I hope somebody knowledgeable can set me straight on this.
Thanks.
-JOHN
ps. Here's the news item on these guys stealing wireless internet access:
http://arstechnica.com/tech-policy/news/2007/05/michigan-man-arrested-for-using- cafes-free-wifi-from-his-car.ars

You may find this technical article I've written helps you:
http://homepage.mac.com/rfwilmut/notes/wireless.html
It is fairly long, but it was originally written in response to some questions from a non-technical friend, and so I've tried to keep it as straightforward as possible.

Question for old comm guy

This is a question for old comm guy regarding his reply to:
Power Mac G5 will not boot. No Chime, Black Screen, Solid LED.
1534 Views 16 Replies Latest reply: Apr 20, 2011 3:38 PM by old comm guy
     I have the same problem with a Mac G4 graphics. All of your comments were very interesting and helpful to me. My question is regarding the following comment:
          "OK, you shouldn't have an active LED inside the computer, so that may be indicating the problem. Is the LED near the CPUs or is it near the front by the RAM? (This is a definite worry.)"
     My G4 does have an active red LED (c64)on the right side of the bottom DRAM slot. Can you tell me why the worry and what a fix, if any, might be? Thanks in advance for your response.

Maybe the following quote can answer the question:
There is one red LED on the Power Mac G4 (AGP Graphics) logic board. It indicates that there is power to the board and does not imply a fault condition. Hardware such as DIMMs and PCI cards should not be installed or removed when the LED is on.
Or this quote:
There are seven diagnostic LEDs on the Power Mac G4 (PCI Graphics) logic board.
DS1 = ATA drive activity
DS4 and DS5 = USB power for downstream devices (There is no DS2 or DS3 on the board.)
DS6 = Ultra ATA bus activity
DS7 & DS8 = Power Indication
In a working unit, these LEDs should be in sync with each other: both on or both off. If one LED is on and the other is off, there is a problem.
DS9 = CPU Bus
Hope that helps. In the AGP graphics version, the LED is there I guess to keep someone from, say, yanking out a DIMM while the board is powered, or some other not-so-good action.

Why can't I post a question from my new system?

Hello All:
I was just trying to post a question from my new mbp but it wouldn't allow me to do anything. It continually gave me a message highlighted in 'red' that i was;t allowed to modify or post anything. I've been asking questions for quite a while and have never seen this. I also happen to have my older bmp, also logged onto the 'Apple Discussions' site, open beside me. Can anyone explain this to me please? BTW, my new system obviously has Yosemite on it while my older bmp has Lion. Thanks in advance, to all those who respond.
Regards,
Ciaochiao

ChitlinsCC, I'm adding your reloaders to my article on how to make using ASC easier.
Here is my ASC work flow...
1) I login.
2) Block the automatic 30 minute logout.
     Unless you do something every thirty minutes you get logged out. The forum software waits to tell you this as long as it can to keep you in suspense ;-) . Filling out a reply is the exception to the thirty minute window.
        Start an auto reloader.
Safari = SafariTabReloader
Firefox = ReloadEvery: "Reload web pages automatically"
Others = Reloaders | Cerberus - Support Center
You need to pick a page that will reload over time without stalling out. It's ASC. I've found my profile display the best to use. I get my Profile page after some logins. It's ASC. Change rccharles to your apple id.
https://discussions.apple.com/people/rccharles?view=discussions
Reply technique
Open a new browser window. Pick some discussion. Open a reply window. As long as this reply window is open, you will stay logged in. The 30 minute times is reset as needed by the ASC software.
3) I open another window to do my normal ASC browsing.
4) I have a FireFox bookmark to goto the discussions that I have participated in. I've modified it to add on the content stuff.
         turingtest2 recommends. Change rccharles to your apple id:
https://discussions.apple.com/people/rccharles/content?filterID=participated~obj ecttype~objecttype%5Bthread%5D
5) Use turingtest2's generated links with the /content suffix as browser bookmark to the ASC discussions:
Site map of Communities and Categories
https://discussions.apple.com/docs/DOC-2463
6) Adjust the ASC web page layout.
For FireFox
I run with Hiroto's modification to user content. This is the only way these forums are readable for me. How to adjust the format and layout of ASC Web Pages:
https://discussions.apple.com/docs/DOC-7501
For Safari
"ASCPowerTools is a Safari Extension designed to give more control"
http://www.etresoft.com/ascpowertools
7) Read and answer my old posts. I kind of memorize the time I last posted. ( It's way bad that apple eliminated the last poster to a thread. )
8) I use tabbed browsering. From a list of discussions, hold down the command key then click on the link. You get two tabs this way. The original window will keep where you have been.

After installing Firefox again, I wanted to get back my settings, bookmarks etc. by syncronising with Firefox Sync but accidentaly settings from a fresh browser

After formatting the partition and installing Firefox again, I wanted to get my settings, bookmarks etc. back by syncronising with Firefox Sync but accidentaly settings from a fresh browser was uploaded and now I cannot have the browser the way I used to have. Is there any way to reverse this changes?

Hi zoomy,
First check that you still have data in your sync account.
Firefox button > Options > Sync > Manage Account
It should tell you how much data is stored in the account. Is there any?
If there is still data in the sync account then you can follow the instructions in this article [[What is Firefox Sync?]]. Refer to the 'How much of my data is synced?' section. Change the option to 'Replace all data on this computer with my Sync data'.
I hope that works for you.
If there is no data in your sync account you will be able to get it back by syncing from another computer. Just make sure that the settings on that computer are not replaced by the blank account again. You can use the 'Replace all other devices with this computer's data' option to prevent this.
Please note that Firefox Sync is designed only to sync details between devices not as an online backup tool. If you are formatting a partition it is generally best to backup your profile folder along with any other data. See [[Managing profiles]] for more detail.
--Edward

May be slightly simple question from a new Mac user: Why can't I quit safari? I cannot quit it from top menu bar neither to do it from dock? All other apps are working normally.

May be slightly simple question from a new Mac user: Why can't I quit safari? I cannot quit it from top menu bar neither to do it from dock? All other apps are working normally.

Or you can actived the right button on your magic mouse and click on they icon in the dock. then you select "stop" and it's out of your dock.
Greetings
*update: Sorry, my mistake! I didn't read your message correct! Sorry for the inconvience!

TS2446 what do i do if i failed one of my security questions from forever ago from trying to buy a song after changing my password?

I have been locked out and am unable to purchase anything. I just got a new laptop, and it asked me my security questions from forever ago. How do i fix this?

Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities

Need recommend to build MB + CPU + VGA ....a question from Vietnam

1st, sry my E is not good...
My job is working with 60% Pr 40% Ae (full HD)
I need recommend to help me choose 3 option
CPU + MB (in VN they same price)
1.   i7 950 + X58
2.   i7 2600 + p8z68
3.   2xE5520 + asus Z8NA (2nd)
VGA (in VN they same price)
1.   GTX 570
2.   Nivida Quadro 1800 (because quadro 2000,3800,4800.. all supported is very difficult to buy it in VN) Quadro1800 can be GPU hacked ? (2nd)
My PSU 750W
RAM DDR3 Gskill buss 1333 4x4gb
a question from Vietnam, need to help so much
Thanks alot
Waitting for Harm recommend

I concur with Harm's recommendation. The Quadro 1800 is obsolete: It is based on the equally-obsolete GeForce 9600 GT but with only a 192-bit memory bus instead of a 256-bit memory bus. As such, the only memory configuration that was available on the Quadro 1800 was 768MB. Unfortunately, Premiere Pro CS5 requires a minimum of 765MB of free, unused graphics memory just to even enable GPU accelerated mode at all even with the hack. But since Windows itself eats up some of that 768MB, you'd be left with less than 750MB of free, unused graphics RAM with that Quadro 1800. As a result, Premiere Pro CS5 will be stuck in software-only mode even with the hack if you have the Quadro 1800 as the primary card.

HT5570 I do not remember the questions from my Apple ID to reset password

I do not remember the questions from my Apple ID to reset password

Hi Dima,
If you are having issues with the Apple ID security questions, you may find the following articles helpful:
Apple ID: All about Apple ID security questions
http://support.apple.com/kb/HT5665
Apple Support: Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/ht5312
Regards,
- Brenden

Security Questions from a Select List or Drop down Service Provider Edition

Hello,
Can we fetch security questions from the drop down or a select list in Service Provider Edition. We have a requirement to select multiple security questions during registration.
Please advise.
Regards
Vinod

HI
Welcome to the Forum...
You cannot put all the values in a single parameter field so you need to select each field for each parameter...
Better you post it in this link for more reponses:
Reporting and Printing

I cannot find my question from last night. I saw the instruction from jscher2000 but I find nothing like what he decribes.

I cannot find my question from last night. I saw the instruction from jscher2000 but I find nothing like what he decribes. My question was "Firefox 22 worked on Windows 7 but 23 does not"

hello MLP99, you can find your prior questions & answers under this link (once you're logged into support.mozilla.org with your account): https://support.mozilla.org/questions?filter=my-contributions

[3 Questions from a fresh guy~]

Similar Messages

Maybe you are looking for