3 seprate problems with my K8N Neo Platnium (MS-7030)

Hey,
I am having three seprate but very annoying problems with my new K8N Neo Platnuim. Two of the problems are audio related and one has to do with my Sata hard drive.
Audio- First of all my audio is reversed and has been for awhile (annoying for games). I also have had a problem with the drivers. I have a stereo hooked up through an optical cable and with the MSI realtek 97 (newest driver) it doesnt work. So Then I tried a different realtek driver from asus site and my optical cable worked but still reversed sound. I decided to go back to the msi driver cuase they came out with a new one and same old problems (reversed sound and no sound through optical).
SATA- Secondly I purchased a maxtor 200 gig hd and tried to install windows xp on it will leaving my windows intact on my old hard drive. Now whenever i try and boot off my new hard drive it says error operating system even if i format it and this windows works on my old hd.
Anyways sorry for my poor grammer and spelling but i would really appreciate some help on these three subjects.
Thanks

Nobody wants to help me .... I read on a different post that u can only get 5.1 surround sound for movies through optical. You cant even get the sound check to test speakers other then R/L through optical.... This seems rediculus to me!! I have to go through analog if i want surround sound!!! Anyways this still doenst solve my problem of reversed sound or the fact that the MSI realtek driver doesnt work for optical and an asus driver (which i will now reinstall knowing about the fact that my 5.1 surround sound dreams through an optical cable will never happen ) Also my problem with my SATA drive.
P.S. Is it possible to have my audio hook up from the case to the mobo on backwards explaining the reversed sound?
Anyways thanks in advance for anyone who helps me ....

Similar Messages

Big problem with MSI K8N neo 2!!!

I don't know what it is, but it's a big porblem that many people have with their new K8N Neo 2 Pl motherboard. The problem is that the system freezes and you must push the power button or the reset button.
It happens randomly, when i move my mouse, when i am copying something, when i download something.
I have already updated my bios, with no result. My brother has totally the same specs like me. We bought it at the same time and he has no problems and my pc freezes all the time.
What could it be?
specs:
3800+
POV 6800 Ultra
Twinmos Matched 1Gb PC3200
2 x 160 Gb maxtor Diamandplus 9
Akasa 460 Watt.
Msi what the have you done with my motherboard?

How does that dual power rail thing work? can one device pull from both at the same time? (i.e. the cpu) if not the 14/15 amps from only one of the rails wouldnt be enough, if that is not the problem, it sounds like you got ahold of some dodgy memory. run memtest86+ from a boot floppy, if it clears 10 hours, well start looking for other culprits. it may very well be the motherboard, but the best way to get help is not to go on a forum dedicated to that manufacturer and start cussing at them.

The same old problem with temperatures (K8N Neo Platinum)

I have problems since bios v1.0 on my K8N Neo Platinum with temeparutes.
I have installed a Prometeia Mach II St colling unit
I Tested the v1.0 official bios, the temperature was allways -65º full ou idle, what it is impossivel.
In the moment i flashed the bios to v1.2b5, temperature changed to 49º, and I did not move in nothing. The same temperature appears in all bios since v1.2b5. Now I have the v1.4b2 bios
Sorry the Bad English

Here are the instructions to reflash the BIOS for your K8 Neo. I am currently running ver.1.4 with little problems. My only snafu is the LED for my optical mouse stays lit even when system is off, however I have no RAID, Ethernet, onboard sound, or SATA drives. I have just a simple basic system, and I don't overclock. My board is the K8 Neo Platinum socket 754, with an AMD64 3000+. YOU MUST HAVE A FLOPPY DRIVE CONNECTED TO SYSTEM FOR THESE INSTRUCTIONS TO WORK!.
Flashing BIOS on K8 Neo per MSI. READ ALL instructions before starting.
1.Check your BIOS for flashing protection and disable it.
2. Know your board model#. a. Open case and find model# on the board between the PCI slots, or b., boot system and at first DOS screen you will see 'W7030ver1.4122101'. This means you have a MSI model 7030 motherboard with BIOS version 1.4 issued on 12/21/01.
3.Download the Bios that matches your motherboard model and version#.(I believe the Neo Plat had two versions, 1.0 and 1.1). I have 1.0. It will be found between the PCI slots. Create a folder on C: drive labeled 'C:\TEST'
4.EXtract the BIOS file to C:\TEST folder.
5.Create a boot floppy. For XP, at Desktop double click My Computer, right click floppy drive, click Format to format the disk, then click 'Create MS-DOS Boot Disk'.
6. Set boot order to floppy. Hit F11 to select boot device.
7. Insert boot floppy and restart system.
8. At A:\ prompt type in the following,
C:\ (enter)
cd\TEST(enter)
awdfl833c(space)w7030nms.130
The w7030nms.130 is the BIOS file name you downloaded to C:\TEST. Keep in mind you're dealing with DOS file names, so you may need to open a DOS window in Windows, and search C drive for the TEST folder and write down the DOS file name of the BIOS file BEFORE you start the BIOS update.
9. Reboot when prompted. It shouldn't take more than 10 seconds to update the BIOS.

Problems with msi k8n neo-2 and xfx 6800 card

is this card incompatible with the msi k8n neo-2 motherboard?
i ve got this mobo last week and when i tried to install the card to it nothing comes on screen, no beeps or nothing, ive changed the power supply, the card works fine on my old pc with both power supplies (old pc was 2500+ amd with epox 8rda+) i ve tried booting up with nothing else connected on the psu except the card itself, it still doesnt seem to work, the new motherboard works fine with my old radeon 9600 pro.
What can i do?

Thats not what I read (assuming this is the same correct model)
420W double unit
DC O/P Load Max
+5V 42 Amp.
+12V 16 Amp.
+3.3V 28 Amp.
-5V 0.5 Amp.
-12V 0.8 Amp.
+5VSB 2 Amp.
Agreed that one is 420W, but is that it or not?

Problems with my K8N Neo 2 and my 6800GT

I just got my MSI K8N Neoboard with af Winchester 3200,
when Iam playing or do some 3Dmarks.. my suystem hangs/freeze for a couple of seconds... it dont reboot just freeze and then gooing on.
At first I thought i have OC to much ( 400/1100 ) on my 6800GT.. so i tried going down on 375/1000....
i did not freeze so much now.... but still, I can only play for 2 min without failure.
on me old board Asus A7N8X i drove my VGA at 400/1100 without any problems.
I have tried som different drivers 66.93,67.42... without luck...
What is wrong..... is there a problem with this AMD 64 board and a 6800 GT

hi Howdiaudi
welcome to the forum
if youve not seen it 6800 cards-a no-no with nforce boards? may give you some ideas/solutions
there are a number of other threads about your card which you'll find with the search function
hope you get sorted
good luck

4 problems with new K8N Neo 2 Platinum

Just purchased by first MSI board after using Abit for years. Why...I read very good reviews on this board but now I wonder if I made a bad choice.
I have 4 problems with this board.
1. The PCI slots do not recognize any hardware. I have tried my US Robotics modem and Audigy sound card in each slot and nothing.
2. The fire wire port is inoperable. It does not appear in device manager.
3. The second LAN (Gigabit) does not function also. It does not appear in device manager.
4. Won’t boot with my Radeon 9600 XT graphics card. (Might work 1 out of 20 tries if lucky) It works on my old motherboard. Old 7200 works but has a hard time on cold boot.
All of this hardware still works in my old ABIT IC7-G
Here is my setup
Fresh install XP Pro SP2
K8N Neo2 Platinum
AMD Athlon 64 +3500 (Socket 939)
(2) 512MB sticks Corsair TwinX-3200LL Slots 1&2
Radeon 9600XT (Currently using Radeon 7200) as 9600 wont boot
Antec Trueblue Truepower 480W (+5V 38A/+12V 22A/+3.3V 30A)
Board came with bios ver. 1.3 out of box
(2) Western Digital Raptors 36MB each (Raid 0) SATA 3&4
Plextor PX 708A DVD RW
Sent an email to MSI tech support and received the following response:
With regard to your concern, would you please first enter BIOS and Load Optimized Defaults, then save&exit. Also please remove all current drivers for your motherboard and install them over again using the setup CD provided by MSI along with your motherboard? And then please check if in Device Manager, there is any yellow marks, then check again.
If after re-install the drivers the problem still persists, could you please tell us how you connect your HDD to system, and which is your system partition, which can help us analyse the issue. Thanks in advance.
I have done each of these several times with no luck and my reponse to MSI is still unanswered.
Other than all these items......everything else works as I am using this PC to write this call for help.
Any help would be appreciated.

Download the latest Nvidia nForce3 System Drivers from MSI
1)Download to a folder & Unzip the File (Right Click On it)
Also get the Following:-
Realtek Gigabit Ethernet Drivers
Realtek 10/100 LAN Drivers
Realtek ALC Series AC'97 Audio Drivers
2)Open Bios & goto Onboard Devices Ensure the following are enabled :-
MAC Lan (Should be Set to Auto)
OnBoard 1394
OnBoard Giga Lan
AC97 Audio (Enable it for Now & Setup Drivers - Easy to Disable it When SB IN)
3)Install the drivers - Try Right Clicking on the Setup - Properties - Compatability Mode - Select Windows 2000 (Some Drivers Especially NVIDIA Ghave been known just to run but not Install This option should help prevent that)
See where you get through that
Note Once everything is up & running ok you may want to keep your drivers upto date by using the Unified Nvidia System Drivers, as they are usually updated quicker than the MSI ones.

Problems With MSI K8N Neo Platinum

Posting some probems I have face and wondering if you folks have experience similar problems. I bought 2 and bot hahve same problems (sold both of it). Another friend of mine have also same problems with the board.
1. SATA 1/2 don't work properly. I have detection problems using SATA ports 1/2. The comp will not detect my IDE devices and hang at POST screen. Reboot/reset don't solve the problem. I have to turn off and on to get it to work. Problem is only sovled after switching to SATA 3/4.
2. Network disconnection problem. The NIC will auto disconnect and reconnect back by itself, esp. when under overclocked conditions.
3. Cannot overclock much using DIMM slot-1 esp. when mem is over 230MHz. Must change to slot 2/3. Even so, I do face BSOD stating an USB driver is the cause of the issue.
4. Comp will sometimes unable to reboot at FSB between ~210-240MHz. 250Mz and above seems OK.
Now, I am using Abit KV8 Pro 1.1 and it works fine though. No FSB reboot issues. I am using 1.1 with latest BIOS, thus not AGP/PCI lock issues. Hope MSI will fix those problems mentioned ASAP cause my Abit don't work with mobile A64s. :(

Seriously, I have absolutely no idea. It may be a QC problem, it may be a design problem, its may be BIOS or others. The only thing I know that after I jump ship to Abit KV8 Pro 1.1, all these problems are gone. Only problem is that Abit don't support mobile A64s.
BTe, just another problem or maybe over conservative restrictions. When using DDR333 RAMs, the BIOS will not allow you to manually set it to 400. Thus at 200MHz FSB/HTT, your RAM is stuck at 166MHz. Pretty stupid restriction I have to say.

MOVED: K8N Neo Platnium not detecting PCI cards

This topic has been moved to Intel P4 & Celeron P4 based board.
K8N Neo Platnium not detecting PCI cards

I had a similar problem with a 945p neo platinum board. Anything I plug into any PCI slot didn't detect. I solved the problem by flashing to the latest BIOS for the board. Now everything seems to be working fine.
Maybe that might work for you?

K8N Neo Platnium not detecting PCI cards

This is my second K8N Neo 2 Platnium board. Both of them have failed to detect the cards in the PCI slots. I know for sure that both of the cards work in my old system since i had to switch back to my old parts when i was getting my first board RMAed. The two cards are:
Creative Audigy 2 ZS sound card
Promise 100TX ATA controller card
I've disabled the onboard audio in BIOS, but that wouldn't matter since its not detecting either card. I've done the "search for new hardware" wizard in Windows XP Pro w/ SP2 and all updates as of Sept 26, 2005. I've tested it both inside and outside of the case so it isn't shorting.
I am P*ssed off.
Frankly, this is unacceptable. Not only that, but upon inspecting the second board right out of the package, I saw that it has been ran before. Long enough for dust to collect on some caps and on the SATA slots around the nForce chipset. Also, there were little rings around the mounting holes from where screws have obviously been screwed in before.
Not to mention i had to call them to send my RMA out. Website said it was ready to be shipped on 9-14-2005, I called on 9-20-2005, and it finally shipped out the following day.
I am not happy with my MSI purchase. This coming after hearing so much good about this company. Unless this problem is resloved I doubt I'll ever buy another one of their products again.

I had a similar problem with a 945p neo platinum board. Anything I plug into any PCI slot didn't detect. I solved the problem by flashing to the latest BIOS for the board. Now everything seems to be working fine.
Maybe that might work for you?

Problems with msi p35 neo 2

Default problems with msi p35 neo 2
pc works fine when using windows and the net and emails
only when using 3d mark or games do i ever get problems
just help in getting the hole story 6 months ago got a msi neo2 install all my old components core 2 duo 4 gig ram form a diffrent board works fine but never used it playing games just used for the net and email shoping seamed to work fine but
tryed playing a game 2 months later command and conquer 3 pc was some times freeze or graphics artefacts on screen assumed vga card faulty got another graphics card geforce 8600gts installed still the same in the last month got round to playing with the pc again and installed new g7 780 watt power supply and ati hd 4870 graphics card
now i can use 3d mark some times it will go through once or just freeze or 3d mark stops the test
temps on the board (from msi dual core center temps cpu 33oc system 47oc)
memory voltage 2.1
any one know the settings for the ram
more details you need
System Details
MotherboardEdit Value
msi p35 neo2 fr
Motherboard BIOSEdit Value
latest
CPUEdit Value
core 2 quad 6600
CPU Overclock SpeedEdit Value
none
CPU HeatsinkEdit Value
standard intel that come with cpu
CPU Idle TempEdit Value
N/A
CPU Load TempEdit Value
N/A
MemoryEdit Value
******* xms2 2x2 gb ddr2 part no cm2x2048 6400c4dmx
Memory VoltageEdit Value
N/A
Video Card(s)Edit Value
ati hd4870
Video Card SpeedEdit Value
N/A
Sound CardEdit Value
onboard
PSUEdit Value
g7 780 watt power extreme
Hard Drive(s)Edit Value
mator dimondmax 21
Optical Drive(s)Edit Value
N/A
Other CoolingEdit Value
3 80mm fans 1 frount 1 back 1 side
ModsEdit Value
N/A
Operating SystemEdit Value
windows 7

Quote
******* xms2 2x2 gb ddr2 part no cm2x2048 6400c4dmx
Quote
memory voltage 2.1
Make sure that the memory timings are not set to 4-4-4-x but that they are set to the defaults values (5-5-5-x). Also ensure, that the memory clock speed is not set to anything higher than 400 MHz (=DDR2-800). The voltage at these settings should not need to exceed 1.95V. So please lower it accordingly. In case the freezes still occure, please run memtest86+ to check your memory for errors.
Quote
msi dual core center
Please get rid of that tool for all further tests. Uninstall it completely from your system as it is known to cause crashes and freezes on its own terms when running.

Problem with my 875P NEO FIS2R when tyring to use x4 Crucial 512MB DDR modules

Hi all
I have a problem with my 875P NEO FIS2R when tyring to use x4 512MB DDR modules. At first the system seem fine then it just hangs on me. All modules are exactly same and I have tried updating my bios and adjusting the settings but nothing works. My system is fine when using x2 512MB moduels. I have searched the forum and found no clear answer although there are other people with this problem. Please can anyone let me know if there is anything I can do with my current configuration to make the x4 512MB DDR work?
From other posts I have learned so far that I either have to buy Paired modules from the manufacturer (which is no use because I bought my first x2 DDR a year ago) or only use x2 and now Dabs isnt taking the other x2 that I just bought because there is nothing wrong with the modules themselves (its the mobo).
I built my system from scratch and wouldnt have been able to have done it without previous assistance so thanks in advance for any help

Relaxing the timings will enable your RAMs to run at higher latencies so that they do not need to go extra mile to catch up with the transfer rates with the FSB.
Lowering the frequencies is like underclocking a speedy twin turbo to a standard single turbine which means lowering of speed so that the RAMs can run lower than expectations which'll be able to provide room for o/c'ing back near to its original frequency.

K8N NEO PE MS-7030 and Geforce 6800 Vanilla

I am on the way to buy a new graphic card , and I have 2 choices : 1- XFX 6600GT AGP 8x 128MB 500/100 and 2-XFX 6800 AGP 8X 128MB 325/700, the difference between both about 25$ for the 6800
I prefer the 6800 but I read bad stories with nforce 3 mobos, so it is safe to go with the 6600GT, I know there is no much difference between 6600GT and 6800 but in 6800 you can unlock the extra pipelines and the vertex shader
I read a lot of topics about freezing and craches with ms7030 and 6800 series ??
any one is using K8N NEO PE MS-7030 and Geforce 6600 Vanilla without problems ??
is the problem still or it has been solved ??
SO what is your recommendation ?
Thanks

Quote from: Russ_xp on 23-October-05, 22:14:28
Go for the 6800, the problems with the nf3 chipset affect all series 6 cards including the 6600GT. The solution is simple - just disable fast writes in the BIOS.
The 6800 is a native AGP card but the 6600GT is a PCIe card with a HSI chip to convert it to AGP and it gets very hot. Also you may get lucky with the pipes and it should overclock a bit. If you stretch a bit further get the 6800GT with 256Mb and it OC's to Ultra speeds.
Too right... In addition disabling fastwrites and the dreaded ATI/NV speedup option, make sure that the 2D/3D accel speeds are at the same settings, if not the card tends to "freak out".
I have a BFG6800 OC ("vanilla" 6800 GPU/slight "factory OC") and I got lucky & was able to unlock the hidden hardware. I had an early 6800 GPU though & I think that Nvidia "closed the door" on that mod with the later builds. Something to keep in mind.
Regardless, with the unlocked hardware I was able to get near (close, but not quite) stock GT speeds but the benchmark score didn't really translate to the real world. The big limitation of the 6800 is the puny 128 mb of RAM. If I had it to do over again, I'd saved my pennies & got a GT (w/256mb of RAM), I'd be a lot happier with it. It's not that the 6800 is bad, but the GT is a LOT better.
The good thing is that the 6800 GT prices are starting to come down a bunch since the 7800's came out. If you shop around, you should be able to find a great deal on one. I'm about to go looking myself, if I come across a killer deal, I'll post back.
Edit: I've done a quick search & the chances of just finding an AGP 6800GT don't look too good. I've checked 5 vendors so far and they're either out of stock or discontinued I may have waited a bit too long....
But vanilla 6800's can be found for about $200.

K8n Neo Platinum MS-7030; freezes during OS install

I am an experienced builder, I have built dozens of systems and even trained people to build their own. I am also an experienced forum user (new to this board) I have searched extensively on this subject and tried every suggestion I have found. Alas I am still having a problem.
My System is
K8N NEO Platinum MS-7030 ver 1
Athlon 64 300+ Newcastle
CORSAIR ValueSelect 1GB (2 x 512MB) (PC 3200) VS1GBKIT400
2xWestern Digital Caviar SE WD1600JD 160GB 7200 RPM Serial ATA150 Hard
Pioneer DVR-108
I built this system in November 2004, for my cousin and his family. It installed XP Sp2 and has never given the slightest hint of a problem.
My cousin bought a OEM version of x64 so we could finally make it into the 64-bit system it is intended to be. We backed up his files and formatted the hard drive, he also bought the second hard-drive so we can make it a raid-0 system.
I flashed the bios to 1.70 and all seemed well. Install keeps freezing. I tried to reinstall XP32 still freezes intermittently. I have tried all of the f6 driver installs, in 32 and 64 bit. I have tried PCI and AGP cards, I have tried one sided PC3200 memory. I tried an IDE hard-drive. I have even tried using my Power-man 450 watt server PS that has been running my Dual athlon server for three years. I have tried enabling and disabling every bios setting available, I have tried underclocking the memory and dis-abling cache in the bios. Currently the board is on the table, with one stick of memory, the processor, and an old creative PCI graphics card with a seagate 20gb IDE hardrive, it still freezes. I have tried raisng and lowering voltage for the CPU and memory. I have even back tracked to the original bios, and tried every bios in between, setting and resetting every option in bios, with each, I have made dozens of attempts, and read hundreds of posts here, including Raid tutorials and installing XP tutorials. It won't even install XP32. Any other suggestions before I RMA?

Nice to hear it helped .
Flashing between different bios generations sometimes needs a full flash with bootbloack/dmi/and reset during/after flash (not only awflxxx biosrom and enter )
this because they are sometimes completly reworked .
I always use the full commandline option also with the /f switch and it's never given me probles switching between very old and very new versions .
Some don't like to reflash the bootblock though , but sometimes it should be , as it has changed trough some versions .
Same goes for winflash , always markes bootblock/dmi/update all/and cmos reset .
The nice thing about winflash is if the flash goes wrong it's just to kill it through taskmanager and try over until you get a successfull flash .
As long as you don't shut down or restart your computer it's working even with the mainblock erased .
Experienced this myself today , when trying 1.9b6mod for neo2 .
Mainblock was erased and new programming stopped at 22% .
So i downloaded from internet another winflash version (1.0.0.1) and was able to reprogram back to 1.8R2mod by tictac .
For the 64bits I had the same problems while testing/running it with the beta version back in january (not tried XP64 with the newest retail version and newest nvidia xp64 drivers) .
It installed fine on single drive but bsod'ed with raid-0 .
Try making a new custom floppy with the latest nv-ide/nv-raid drivers on it , and
recreate the array with "clear disk data" and the option to set as bootable .
Have the sata ports set at "sata dma enabled" in bios .
It's also different depending on which sata ports you are using .
Sata port 1/2 is connected to the nv-chipset though the chip-link to the marvell extrenal PHY for the drives
and port 3/4 use the internal integrated nvidia PHY .
So you can have different results depending on if you create the array on port 1/2 or port 3/4 .

K8N Neo Platinum (MS-7030) drives

the lastest drives from my K8N Neo Platinum (MS-7030) (socket 754) are 5.03 ?
http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_list.php?part=1&kind=1&CHIP=1&COM=4
Thanks

Ouuchh!! Hown uninstall my old drives 5.03 ?
After installing 5.10 I will not have problems with my all drives (Ati 9600 xt /soundblaster live ) ?
My problem is the system is very very slow. and my old cpu (athlon 2.0 msi k4 ultra -512 mb) was faster than my new AMD Athlon64 Processor 3200+ Newcastle -Msi K8n Neo Platinum -512 mb)
I suppose the problem is my a memory
DIMM 1
Module Name   SMT-OF-AMERICA
Module Size   256 MB (1 rows, 4 banks)
Module Type   Unbuffered
Memory Type   DDR SDRAM
Memory Speed   PC2700 (166 MHz)
Module Width   64 bit
Module Voltage   SSTL 2.5
Error Detection Method   None
Refresh Rate   Reduced (7.8 us), Self-Refresh
Memory Timings
@ 166 MHz   2.5-3-3-7 (CL-RCD-RP-RAS)
@ 133 MHz   2.0-3-3-6 (CL-RCD-RP-RAS)
DIMM 2
Memory Module Properties
Module Name   SpecTek
Module Size   256 MB (1 rows, 4 banks)
Module Type   Unbuffered
Memory Type   DDR SDRAM
Memory Speed   PC2700 (166 MHz)
Module Width   64 bit
Module Voltage   SSTL 2.5
Error Detection Method   None
Refresh Rate   Reduced (7.8 us)
Memory Timings
@ 166 MHz   2.5-3-3-7 (CL-RCD-RP-RAS)
@ 100 MHz   2.0-2-2-5 (CL-RCD-RP-RAS)
Sorry for my English

MOVED: MSI K8N Neo Platinum (MS-7030) won't post and just beeps

This topic has been moved to AMD64 nVidia Based board.
MSI K8N Neo Platinum (MS-7030) won't post and just beeps

1)Main Menu - No Post/No Boot problems and fixes - Bios-Central Award Bios Beep Codes + others
2) Memtest86+ As Stated
3) Power Suppy Requirements & Selection
4) Post Specs re Powe supply 3.3v 5v & 12v Amps., Gfx cards Drives etc.,

3 seprate problems with my K8N Neo Platnium (MS-7030)

Similar Messages

Maybe you are looking for