3 way SLI bridge connection works with only 2 GPU's

NF980=G65 Mobo.
I've read at least one post here a while back about somebody having a problem with a jumpy or flashing screen when in SLI mode with 2 GPU's. He stated that he tried using 2 ribbon connections & that fixed the problem.
Well, I'd like to report that I have 2 GTX 260 GPU's installed in SLI mode & they each have 2 ribbon connections.
This made me wonder if I can use the solid 3 way SLI bridge connection instead of only one ribbon.
Answer= Yes,, it works,, & it seems that I do have a faster transfer rate when I swap pages from one page to another.
Example. When I play my favorite online games I always use Ventrilo or Teamspeak2 VOIP applications to talk to my friends & team mates during game play. If I need to see who is on Ventrilo, I use the windows key to swap or change the screen back & forth from the game screen to the Ventrilo screen. I notice that the transfer rate or the time it takes to change screens is almost instant using the 3 way SLI bridge with my 2 duel ribbon connection GTX 260's. Try it if you have GPU's like this. You'll see. Happy gaming

Thanks for reporting your findings.

Similar Messages

X99S GAMING 9 AC - 3-WAY SLI BRIDGE...?

Hello everyone,
I got this mainboard and installed 3 titan cards in the pci slots 1, 2 & 4... To get this to work in sli, I use my old asus 3-way sli bridge with 6 connection points. This is not the best solution since its running on 8x-8x-8x on the pci buss... Iwe asked msi for help because in the manual it says I can run 16x-16x-8x if i put the 3 titans in slot 1, 4 & 5... Now they have sent me 4 "single wide-sli" bridges that I can put on... Since I use 3 cards will only be needing 3 of these bridges... But can anyone please post an image how to do this...? Iwe had several mainboards before, and the sli bridges for 3 and 4-way sli has allways been bundled with the mainboard. I remember my evga x58 mainboard had 2 different 3-way "doube wide-sli" bridges and 1 4-way bridge included for different innstallations of the graphic cards...
If you see on page 12 in this evga document, the sli bridges i thought was bundled with the msi mainboard are shown, and the long 3-way bridge looks like the one I thought msi was going to send me: Ok, link did not work...
Try google 141-bl-e759.pdf

Quote from: jpouza on 31-October-14, 17:40:59
Thor, I am setting up a 980 3 way SLI with the 5930k...do you managed to get the cards working at slots PCIE 1,4 e 5 at full speed (16x,16x,8x) with the crossed bridge? It reaches slot 1 to slot 5 crossing? Is that it?
Or you get full pcie speeds with slots 1,2 and 4? What solved the problem? Can you post an image of the cards in the slots?
Thanks!
Hi jpouza, Im not allowed to post a link to an image of my sli bridges on this forum, but I can describe it:
Im using 3 sli bridges from msi that is 13.8cm long each...
I have the cards in slot 1, 4 and 5, this is running at 16x16x8x... This is the best as you know (40Lanes)...
I have tried before 1,2 and 4 @ 8x8x8x, and this gives a lower result in benchmarks...
One display card have 2 plugs, lets call them 1 and 2 (counting from the left to the right)... The " " sign represents the pci slots:
First: Connect one bridge between display card "1" plug 1 and display card "4" plug 1...
Second: Connect one bridge between display card "4" plug 2 and display card "5" plug 2...
Last: Connect one bridge between display card "5" plug 1 and display card "1" plug 2...
This last bridge is a little tricky because its in my opinion just a little to short, but you can put it on carefully...
The Blue image earlier in this post shows the 8x8x8x setup, since the distance between the cards are equal...
In the 16x16x8x the connections are the same, but you need longer sli bridges because you use pci slot 1, 4 & 5...
Hope this helps you...

Wireless Bridge Not working with 5200,5220 and 5240 channels

Hi Team;
I am setting up a bridge connection with 1262 AP as the root and 3502 as the non root and i observed that it is working with only channel 36. If i am setting up other channels like 40,44 & 48 its not working.
My partnumber is 3502E-E-k9 and 1262E-E-K9

Post your radio interface configuration in both ROOT & NON-ROOT to check.
HTH
Rasika

Why does my imessage not work with only 1 phone number

Why does my imessage not work with only 1 phone number? It keeps going to imessage and then back to text message

Both you and the recipient have to have active data connections, and both devices have to have iOS 5 or higher to be able to use iMessage. Also, they both have to have iMessage activated. If that is already the case, there is a possiblility that iMessage is down. It has gone up and down several times in the past week. Check this page for status, and if necessary you can report a problem with a link in the lower right corner. http://www.apple.com/support/icloud/systemstatus/

Why won't my iMessage work with only one contact in my phone all my other iMessages send and they just got an iphone but all their iMessages are sending also. I've tried restarting my phone, deleting messages, contact, restarting network

Why won't my iMessage work with only one contact in my phone all my other iMessages send and they just got an iphone but all their iMessages are sending also. I've tried restarting my phone, deleting messages, contact, restarting network

Hello Jesslb23,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
To resolve issues with sending and receiving iMessages, follow these steps first
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you have registered iMessage with your phone number or Apple ID and that you have selected iMessage for use. Learn more about troubleshooting iMessage registration if the phone number or Apple ID isn't available for use.
Open Safari and navigate to www.apple.com to verify data connectivity. Learn more about troubleshootingcellular data or a Wi-Fi connection if a data connection isn't available.
iMessage over cellular data might not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports. Go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while on a call if your network doesn't support simultaneous data and voice calls.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you are still unable to send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Verify that the contact you are attempting to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and re-create the contact in the Contacts application. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
Best of luck,
Mario

Hi there, I cannot open bridge and I get this warning, "Adobe Bridge Cannot be Opened because of a problem. Check with the developer to make sure Adobe Bridge CC works with this version of Mac OS X. You may need to reinstall any updates for this applicati

Hi there, I cannot open bridge and I get this warning, "Adobe Bridge Cannot be Opened because of a problem. Check with the developer to make sure Adobe Bridge CC works with this version of Mac OS X. You may need to reinstall any updates for this application and Mac OS X" although bridge has been running on my Mac for over a yera. I have installed all current updates for Mac and reinstalled Bridge again from CC and still get the same issue? Any advice?

Would you please provide details about your setup?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I have lost the remote that was paired. I bought another remote, but the procedure to pair the new one does not work. I suspect the the AT will work with only one remote at-a-time and i have to unpaid the first before pairing the second. How do I unpair?

I have lost the remote that was paired. I bought another remote, but the procedure to pair the new one does not work. I suspect the the AT will work with only one remote at-a-time and i have to unpair the first before pairing the second. If this is true, how do I unpair? If not, what can I do?

I was premature in posting the question. I found the answer in andother posting, and it was successful.
Thanks, and sorry for the false alarm.

My imsg is not working with only one person and her imsg is working perfectly fine with her friends

My imsg is not working with only one person and her imsg is working perfectly fine with her friends

See this thread:
https://discussions.apple.com/thread/5306216?tstart=0
From Apple:
MacBook Air (Mid 2013): FaceTime HD Camera might not work after OS X 10.8.5 update
Yes, a fix is coming soon.

Does 'Network Connect' work with MacBook Pro?

My safari unexpectedly quits when attempting to log into my company's VPN.
- I log into our VPN website and the connection begins to initialize
- with my MacBook, Safari (2.0.3) unexpectedly quits
- with my PowerBook, 'Network Connect' automatically starts and the VPN connection completes without any problem
Does 'Network Connect' work with MacBook Pro? Any ideas?

Resolved. MacBook Pro was having trouble dowloading the 'Network Connect' application when I logged into my VPN client for the first time. I copied it from my PowerBook G4 over to the appropriate folder and it now works perfectly.

HT4623 I have iPhone 4S GSM , is there any way to make it works with CDMA SIM card ?

I have iPhone 4S GSM , is there any way to make it works with CDMA SIM card ?

No.

Can Siri work with only wifi without installing SIM card in it?

Can Siri work with only WiFi without installing SIM card in the iPhone 4S?

I am seeking to use the siri from my newly bought iPhone from USA where i am staying here for vacation around 2 months . I will be installing the SIM card not in USA , where iwill be back home 2 months from now. Can it work with only wifi on it

Trouble getting Dlink DWL-G820 wireless bridge to work with wrt610n

I'm trying to get some dlink wireless bridges to work with wrt610n, but not having any luck. I left Wrt610n router with default "192.168.1.1" IP address and configured bridges accordingly with "192.168.1.xxx" adresses.
Wireless bridges not happy. Any ideas ? The bridges were working fine when i was using "192.168.0.xxx" ip addresses with wrt610n
Solved!
Go to Solution.

Well I'll give you full points for reading my question, but zero points for quality of answer. If it was that simple I would have done it.
Unfortunately circumstances have changed and I have both a 192.168.0.xxx LAN & 192.168.1.xxx LAN now and the DWL-G820 (Dlink) wireless bridges must be part of the 192.168.1.xxx LAN (WRT610N Linksys router). For some reason they won't work when I configure them to be part of a 192.168.1.xxx LAN.
I'm beginning to think it's a diabolical plot by either Linksys or Dlink to prevent each other's equipment from working together.

WLC 2106 and Linksys Bridge WET610N works with 7.0.116.0 release?

Hi all,
i'm having troubles with WLC 2106 controller and several wireless bridges, so i'd like to know if i can fix it in some way.
My environment is as follows:
1 WLC 2106 with 2 Aironet 1240G
I have a production appliance that needs an ethernet port to work, so i bought a Linksys Bridge WET610N to make it works via wireless.
The Linksys bridge connects to the 1240G as a client and works well, but the appliance connected to the ethernet port of the bridge is unreachable.
Searching for the problem, i found that the wlc act as a proxy arp for the wireless clients and being the ethernet appliance a "passive" client, the controller isn't aware of it.
My WLC is running the 7.0.98.0 firmware. In the release notes for the 7.0.116.0, in the "Non-Cisco WGB Support" seems to state that now also non cisco bridges can work using the passive client feature. I've already enabled it on my controller but this didn't solve my problem.
Can anyone tell me if the upgrade to the 7.0.116.0 can fix it?
Thanks in advance
Riccardo Coppola

I'm not sure what (cheap) devices can do the wgb feature that is inter-brand compatible.
The thing is that the WLC enforces the rule "1 wireless client = 1 client". Meaning you can't bridge multiple clients behind a wireless clients, that just screws up roaming mechanisms etc ...
Cisco WGBs have the IAPP protocol to tell the WLC "listen, I'm a WGB wireless client and those are the wired clients connected to me, allow them on the network".
What does "universal WGB" feature does is that the WGB forwards the traffic of the client (only 1 client supported in this case !) to the infrastructure AP but the WGB never sends anything with its own mac address. It uses the client mac address as source.
This means that the WLC has no way of knowing that there is more than 1 device. It just thinks that your wired client is a wireless client.
So it's more than mac cloning since the WgB has to be the one authenticating to the infrastructure (Wpa/wpa2 whatsoever) by spoofing the client mac. The WGB is still in charge of roaming decisions and so on and so on...
I hope it clarifies the situation ?

Will PCI-CAN card work with only 2 wires?

If I'm using my PCI-CAN card configured for internal power, do I need to connect anything other than CAN-L & CAN-H to my CAN network? I'm doing this right now and am able to correctly receive packets thru the card. However, it appears that my transmitted packets are not being seen by the other nodes. I'll know more when my CANalyzer arrives, but I was wondering if my cabling is OK as-is.

I currently have a connection set up with only CAN-L and CAN-H wires connected. I am able to transmit and receive with no problems at 500kbs, so it should work as long as the lines are properly terminated. (120ohm resistor bridging the wires at both ends)

Digital Camcorder & router/Airport USB 2.0 to connect eMac with only USB 1

I've looked around and asked many sources, only to come to the same conclusion that I already thought I knew... no way to go from USB 2.0 through another interface to use firewire on an eMac with only USB 1.1.
I'm curious if anyone has connected a router with a USB 2.0 to an older mac, eMac and/or TiBook in my case via ethernet so that a digital camcorder might appear under the ip-based items available from the router?
there is no reason, other than it being painfully slow over USB 1.1 to think beyond the eMac as it otherwise does every task necessary for my in-laws perfectly. never had a single problem that wasn't caused by their inexperience with a computer, which also makes using a mac so much easier to troubleshoot and fix. they just bought a nice digital hdd (hard disk drive, not hd res) camcorder that communicates via USB 2.0 (as almost all do nowadays).
will any router, or more-specifically an Airport router, be able to communicate with the camcorder via its own USB 2.0 interface and then distribute that data over ethernet to the eMac, or would the router be hamstrung by the same USB 1.1 bottleneck that would affect it if done directly.
I'm also open to other alternatives... I haven't had a chance to play with the camcorder yet, but I imagine that it will somehow mount to the desktop were it able to comm via 2.0. any thoughts?
cheers,
- jeremy

hi duane,
thanks for the quick reply. excellent info.
i noticed that your email said more than the post, did you edit out the last statement, as that was what i was going to comment on...?
my digi camcorder, a tape-based model, does show up like a volume on the desktop, but i wasn't sure of the new hd-based one that my in-laws purchased would. i am able to see the other not just in imovie, so perhps it will mount in the usb port of a router. i don't have an AEBS, but would purchase one specifically for this use if it did work. however i will test it on my us robotics and belkin models that have usb as well. i might also try my NAS drive that has a usb port for daisy-chaining more usb items.
the good thing is that the bottleneck on the emac won't affect the process, it's just a matter of whether the hdd-camcorder can be mounted via one of the other options.
thanks for the other comments, i'll mark as answered once i see how it goes...
anyone else have any thoughts?
- jeremy

3 way SLI bridge connection works with only 2 GPU's

Similar Messages

Maybe you are looking for