3 x Cinema Displays on Mac Pro

I´m about to configure my BTO Mac Pro 3.0 Ghz. I want to run 3 x Cinema Displays off this system and I wonder if it is possible to combine one X1900 XT graphics card and one Nvidia GeForce 7300 GT (instead of 2 x 7300 GT..) ?
I´m getting 3 x 23" Displays, but I also want to keep the possibility open to run 2 x 30" displays at some point. Besides, I generally like the idea of having a X1900 XT available in my system..
Would this work ?
Any input is highly appreciated.
THANKS.

When the Mac Pro first came out there was a note in the video developer note saying not to mix NVIDIA and ATI cards, but there is no such note in the latest revision of the note.
<http://developer.apple.com/documentation/Hardware/Conceptual/HWTechVideo/Articles/Videoimplementation.html>
If you use a X1900 and a 7300 GT, put the X1900 in slot 1 and the NVIDIA GeForce 7300 GT in slot 4 and set the PCI-Express bus to x16 x1 x1 x8.
If you use two X1900s, put them in slots 1 and 2, and set the PCI-Express bus to x8 x8 x1 x8.

Similar Messages

Can i use Apple 2005 20-inche cinema display on Mac pro ?

can i use Apple 2005 20-inche cinema display on Mac pro ?

If the display has a DVI connector it will plug into the Mac Pro directly. If it uses ADC (Apple Display Connector)
<http://upload.wikimedia.org/wikipedia/commons/0/09/AppleDisplayConnector.jpg>
you will need a DVI to ADC adapter
<http://www.amazon.com/Apple-M8661LL-Display-Adapter-4038234011420/dp/B00011KHT2>

New cinema display on Mac Pro monitor keeps turning off/going dark. Support told me a keyboard shortcut (something like option R L)... I'd appreciate it if anyone knows it. I had this problem when i 1st bought it 2 months ago.

My new cinema display fro mac pro just went dark. When I 1st bought it, the display wouldn't turn on.I called support and they gave me a keyboard shortcut - something like Option+R+L - that you held down for 2 restart cycles. Then it magically turned on. I can't remember the sequence and I'm afraid to guess! I'd appreciate if anyone knows the trick. I'm also wondering if I should bring this display back...

Cassandra from Apple Support ROCKS!!!! She's a supervisor somewhere and should have a raise. Pleasant, smart and professional with a customer who wouldn't take "I don't know" for an answer.
If your cinema display goes dark:
1. shut down computer
2. restart
3. immediately hold down Command-Option-P-R keys simultaneously for a few minutes (seems forever)
4. keep holding keys for 2 startup cycles
5. release and go back to work if you're lucky to have a restored screen

How to connect the 27" cinema display to Mac Pro?

Hallo, I want to connect my mac pro, early 2008, with force gtx 285 to a apple cinema display 27", which adapter do I need??? Sorry for my english, I'm from austria. Thanks for your help :-)

To drive the 27" to its full reolution you need a male dual link DVI to female mini-displayport adaptor. Apple makes one but it is not cheap ($99). Stick "dual link dvi to mini-displayport adaptor" into a google search and maybe you can find something cheaper.

How to connect 3x mini-displayport cinema displays to Mac pro

I'm looking for recommendations on how to connect 3 27" Apple cinema displays to a new Mac Pro (single card).
2 connect direct to the mini-displayports; but which adapter converts DVI-D to mini-displayport (not mini-displayport to DVI-D)?
Any suggestions/recommendations with a link would be appreciated.

In addition to the one from Atlona, there are:
<http://www.gefen.com/gefentv/gtvproduct.jsp?prod_id=9898>
<http://www.kanexlive.com/c247dl>

24" cinema display with Mac Pro

I am looking for a monitor for an old Mac Pro (DVI). I thought about the Cinema Display LED 24" but since it only has mini display port, what are the options for connecting it with the DVI Mac Pro ?

<http://www.atlona.com/Atlona-DVI-to-Mini-DisplayPort-Converter-p-17859.html>

Want to run two 30" cinema displays from Mac Pro

I'm running Avid Media Composer software to edit a film that I made, and I would like to run (if possible) two Apple 30" cinema displays next to each other off of my Mac Pro (the computer was purchased at end of 2009). While editing with Avid software, I like to spread out my work and bins in able to see everything, and strange as it may sound, I'd like more room than one 30" display can provide. Currently, I have one Apple 30" Cinema display in use, and could purchase another large display if I can find out-- definitively, if my Mac Pro computer will be able to handle it and power it effectively. I realize that Apple doesn't sell the 30" displays anymore, but I saw a few relatively inexpensive ones available on Craigslist recently.
The second monitor that I'm using now is a much older (non-Mac) monitor (and smaller) and the resolutions don't match the high resolution of my single Apple 30" display. So, my reason for wanting a second, larger display are twofold... 1) to see more of my work, and 2) to get the highest resolutions to match (2560x).
The ports on the back of the Mac Pro don't look like they will support the use of a second 30" display, just one. Does anyone have any suggestions?
Do I need to purchase another video card to run a second 30" Apple display? If so, which ones are best/do you suggest?
Do I need to upgrade my processing speed (get a faster processor) to run two large, high-rez monitors?
specs:
Mac Pro
10.6.6
Processor: 2 x 2.8 GHz
Memory: 2 GB
800 MHz DDRZ FB-DIMM
Quad-Core Intel Xem
Purchased end of 2009

If it has two DVI ports, just plug in the second display with an additional Dual-Link DVI cable -- the card can run both displays without issue.
If it has one DVI and one other type, Exactly which display card do you have installed?

5770 with 27" Apple LED and two 20" Apple Cinema Displays w/Mac Pro

As stated, I just bought a brand new Mac Pro 8-core (2010 ID 5,1) with a 5770 card and I'm trying to hook up a new 27" Apple LED and two 20" cinema displays. One of the 20" monitors is using the MDP adapter into the 5770 and the 27" is directly connected to the other MDP port. When I try to hook up the other 20" to the DVI port on the 5770 I get nothing. The screen is black and the it is not recognized as being connected. I'm using the standard DVI connector that came with the 20" direct into the 5770. To make sure it isn't a monitor problem, I switched out the 20" displays and both work using the MDP adapter but neither work plugging directly into the DVI port on the 5770. I believe the 20" monitors use DVI-D. (Is that correct?) So what's the scoop on getting blank screens when plugging into the DVI port on the 5770? Thanks for any help.

"• the 27" is directly connected to the other MDP port.
• One of the 20" monitors is using the MDP adapter into the 5770.
• When I try to hook up the other 20" to the DVI port on the 5770 I get nothing.
Note: If you are using an Apple Mini DisplayPort to DVI adapter, only two displays are supported across the three ports.
If you are connecting three displays, any DVI displays must be connected to either the Dual-Link DVI port or must use an Apple Mini DisplayPort to Dual-Link Adapter.
You MUST use All "Active" or "Powered" Mini DisplayPort connector such as the Apple Dual Link, or you can only use two displays

Dual Cinema display on Mac Pro

Ok so i have 2 cinema displays, one is the 22' inch DVI and the other is 23' inch ADC. Well i finally got my ADC to DVI converter so i can use the 23' inch CD on my Mac Pro. Well finds out, when i connect the 22' inch DVI and the 23'inch with the ADC to DVI converter to the mac pro side by side, it doesnt fit. I need about about 1cm of clearance so i can connect both displays to the back of the computer. Both connectors are hitting each other. The ADC to DVI connector is a little bulky.. What is the easiest way around this fix ?
2 x 2 GHZ Dual Core Intel Xeon Mac OS X (10.4.8) 2 cinema displays

Your computer should have come with a short DVI extension cable with a narrow plug, which will fit beside the other DVI plug. If not, you could file down the DVI plugs.

Black screen on 24" LED Cinema Display using Mac Pro

Hi,
I need some help guys.
I was messing about with my screen resolution and I selected the 720p setting.
Since doing so, my screen is blank and I am unable reset it.
I have tried resetting the PRAM (holding Command, Option, P and R keys) and release after the 2nd start up chime. The screen fires up whilst the system boots up, goes blank again and then for a split second or so fires up (light blue screen) and returns back to a blank screen. I have tried this several times.
I have this new screen connected to my Mac Pro using the Dr Bott Video Link box as my Mac Pro does not have the mini display port.
Any assistance would be appreciated.

Hi Malcolm,
I am glad to report your 2nd suggestion worked a treat and I have a display that works
Thanks for you help - Much appreciated.

How to connect a 23" Cinema display and mac mini to an AV Receiver?

I am trying to get my 23" Cinema display and Mac Mini to a Yamaha RX-2700 AV Receiver. I am on first name terms with the guy in Maplins because I tried to get an Xbox 360 working with this display before and gave up in the end. The AV receiver has upscaling capability so I thought I'd try again. I tried connecting a HDMI - DVI adapter to the HDMI Out on the receiver and a HMDI to DVI cable from the Mac Mini to the HDMI in with a optical cable for the sound. The sound works fine but I get no display - the LED on the monitor flashes three times with a blank screen so it can't read the signal. Another option suggested was to use a VGA Converter connected to a VGA - HDMI cable but I would like to find out if that would work before going down that route?
I am looking for some advice about whether this type of configuation is possible with the 23" ACD and if so what do I need to buy to make it work? I love the quality of my ACD to avoid having to replace it with a TV to get my multi media life in order.
Many thanks

The fifth and sixth item on this page are DisplayPort male to Mini DisplayPort female "Extension cables". Under US$6 plus shipping from a reputable seller:
http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10246#1024602

Can I use 27' iMac(Later 2009) as a display for Mac Pro(future 2013)?

Can I use 27' iMac(Later 2009) as a display for Mac Pro(future 2013)?

See > http://support.apple.com/kb/PH11302
To be able to use the iMac as an external display, the Mac Pro should come with a Mini DisplayPort or Thunderbolt port, so think that it will include Mini DisplayPort or Thunderbolt, although we don't know anything.
To connect the iMac to the Mac Pro, as your iMac has got a Mini DisplayPort, you have to use a Mini DisplayPort to Mini DisplayPort cable (Thunderbolt is compatible with Mini DisplayPort cables, but Mini DisplayPort isn't compatible with Thunderbolt cables). Then, just follow the steps of the page above to use the iMac as an external display

Share cinema display between Mac Mini and MacBook Pro

Hello -
I am keen to get an LED cinema display to use on my new MacBook Pro - but I share my study with my children - so want to give them a MacMini to use.
How easy is it two swap between the MacMini and the MacBook Pro ? I guess there is only one input in the LED cinema display ???
Thanks in advance.
Andrew

Interesting - I have the same idea: sharing a 24" cinema display between a Macbook Pro for myself and a Mac mini for my wife.
The only problem I see is that the display doesn't have any Firewire ports. So if I want to use an external harddrive (or a mini-DV camcorder) on both computers when connected to the display, then I'd have to plug that into the computer instead of the display ...

Cinema display with mac book pro 15" using bootcamp

Hi all, thank you in advance for answering my question. I just got a new mac book pro 15inch with the new cinema display, i am gonna use bootcamp to install windows vista, y question is will i still be able to use the cinema display when i am in windows system? thank you

I have the same set up, but I must be doing something wrong, because when I set up the monitor to mirror the laptop the 24" LED screen is blurry and bright. When I have it set up as dual view the 24" LED screen looks good, yet, I have to drag everything over to the larger screen.
How do I set it up as primary screen? Or make mirror screen work?
Thanks!!!

Dual Display Problem - Mac Pro / 23" Apple Cinema

Hey guys, I'm having a bit of a hard time right now. Here's my situation. I'm using my Mac Pro with a primary HD Apple Cinema Display 23". I just recently stumbled upon a Sony HS95P. I've used this monitor before as a second display a few years back. I bought a " DVI 24+1 male to VGA female adapter DVI-D DVI-I DVI-A " and plugged it into my computer, no problem. Display shows up in system preferences, when I check mirror displays it takes the resolution of the 2nd display and the Sony flashes. However no screen, Blacked on the Sony. When I set up the displays to run into eachother, I can venture my mouse over onto where the other monitor would be, however it's black on the Sony.
What could be the problem? I didn't buy the Apple adapter, but could this REALLY be that serious of an issue? I didn't use it in the past, atleast I don't think I did.. Also could it be the OS? I'm using 10.6.8. Any help or advice/things to try would be awesome... I have two DVI slots in the back of my Mac Pro, gfx card is a NVIDIA GeForce 7300 GT. Thanks guys.

I'm back. Got my Mac Pro back from repair today. Ahhh...25" screen. However, they (the Apple Repair People) have put a new GeForce 8800GT in, to replace the old one.
And the final bill was $380 CDN ($40 for work, the rest for the card, around $300.)
What's Apple's policy on graphics card replacement, even if the customer is paying for it? I thought I asked for a new ATI 5770 card, but maybe I was wrong. I don't think I can take her back in and ask 'em to put a better card in there, and only ask for a bit more to cover the difference in price. I've got a feeling it doesn't work like that.....
thanks
John B

3 x Cinema Displays on Mac Pro

Similar Messages

Maybe you are looking for