30" Cinema and 24" IMac displays won't display the same color

I have a 30" Cinema Display on my Mac Pro and I am using a 24" iMac. I calibrated both monitors with Eye-one-Match3. I am using the same color profiles in Corel Painter and Photoshop and I am still getting different color values in my file. On the iMac the colors seem a bit darker and more saturated than on my Apple Cinema Display. How can that be?
Any help would be appreciated

Sounds like a video card issue.

Similar Messages

Another device on the network is using your computer IP address.. Every time my macbook pro and my Imac are on line at the same time i get this message any help..??

I have tried to turn off my modem and after that i turned on each machine individually it worked for a while giving my macbook pro and my Imac different IP address.. but the problem came back again and im here with 2 similar IP addresses on each machine and once that happen i lose the internet on both of them.. and I get an exclamation mark on my Airoport symbol.
how can i change my IP address and where can i get a new 1.. should i just make it up..??
TY

sirioluce wrote:
I have tried to turn off my modem and after that i turned on each machine individually it worked for a while giving my macbook pro and my Imac different IP address.. but the problem came back again and im here with 2 similar IP addresses on each machine and once that happen i lose the internet on both of them.. and I get an exclamation mark on my Airoport symbol.
how can i change my IP address and where can i get a new 1.. should i just make it up..??
TY
What router are you using?

I need to install cc on two macs. My Macbook Pro and my Imac. Can I use the same account?

I have two machines I use. One primarily for photography on the move and another for mostly Indesign work. Question is can I use the same account on both as it will never be simultaneous.
Derek

Yes.
Mylenium

LR2 and PS Eelements8 show different RGB for the same color - Please, HELP

LR2, Elements 8, Color Chart 24 (CC24),
Please help. I may need to reset LR2 to factory default or to something else.
For the following RAW adjustments the tone curve set to Linear, Contrast and Brightness to 0
I have photographed a CC24 in RAW. Opened image in Elements 8 and adjusted Exposure to 243 for the White patch #19
Then with with WB tool clicked on the 50% Gray and then readjusted exposure for the CC24 listed 243 for #19.
Now all Gray patches #19 through #24 as listed in the table or very close R=G=B (243, 200, 160, 122, 85, 52)
The RGB numbers for Red Patch #15 are R=169, G=58, B=63
The CC24 listed RGB for Red patch #15 are R=175, G=54, B=60
Also saved the adjusted image as JPG
Then opened the image in LR2 and adjusted exposure and WB as described above for Elements 8.
The Gray patches #19 through #24 show RGB numbers as listed in the table or very close.
The RGB numbers for the Red patch #15 are R=138, G=84, B=64.
However the CC24 RGB for Red patch #15 are R=175, G=54, B=60
Exported the image as JPG
Then opened the two saved JPG images in Elements. these two images read almost identical RGB numbers for each patch.
How can I fix LR2 RGB reading. Recently I have saved as defaults the tone curve set to Linear, Contrast and Brightness to 0 and probably did it wrong. My be I need to reset LR2 to the factory defaults to restore its correct reading or something else.
Please help.
Leonid

Q1. Is that means that when LR2 Exported RAW to JPG the correct numbers resulted from conversion?
You should be careful with the term RGB numbers. Such numbers are only useful when you know the working space. For example, sRGB, adobeRGB, prophotoRGB, melissaRGB, etc. The numbers I calculated are simply the reference numbers (find them here: http://www.brucelindbloom.com/index.html?ColorCheckerRGB.html ). I recalculated the values in the display space used in Lightroom from Bruce Lindbloom's values in normal prophotoRGB which is a simple arithmetic excercise. When Lightroom exports a jpeg, you can set the color space in the export panel and it will do the conversion for you meaning that it will translate between its internal colorspace and the desired export color space. In an external program, you will usually be working in sRGB, adobeRGB, or prophotoRGB, which are the three main spaces that Lightroom exports to. As you can see from Bruce's tables in the link above the RGB values for these patches in all these spaces are different.
For example RGB for MacBeth CC24 Red patch (#15) was shown as 203, 0, 0 and x-rite RGB is 174, 54, 60.
They are actually the exact same chart. As I say above the values are meaningless if you don't know the colorspace. The first RGB triplet you quote makes no sense at all. It does not correspond to any colorspace listed for the MacBeth chart. The zeros indicate that the color is far outside of the gamut of the used color space, so the value is basically useless. The second is sort of close to the sRGB value.
Q.2 Would it mean that your shown table should not be applied to (used with) x-rite CC24 but to MacBeth only?
They should be pretty good for both as the chart is supposed to be the same.
Q3. Have you created your posted LR table or it was provided by Adobe?
I created it myself. Since you have a colorchecker, you should look into creating a camera profile using it. This can be done with X-rite's excellent passport utility (free download from their website), or with Adobe's free DNG profile Editor. Simply shoot a chart in the right light conditions and run the raw/dng file through this utility and a profile is created that will allow you to get very good color rendering from your camera if you shoot raw.

My iMac G5 won't continue the start-up process

My iMac G5 won't continue the start-up process, it goes through the gray screen with the Apple to the blue screen after a short while the fans go on and it goes no further.
I'm not sure what to do at this point.

There are a number of things to try:
Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk.
Resetting the PRAM
Resetting the SMU
1. Shut down the computer.
2. Unplug the computer's power cord.
3. Press and hold the power button for 5 seconds.
4. Release the power button.
5. Attach the computers power cable.
6. Press the power button to turn on the computer.
It's possible your logic board has failed, you can also run Apple Hardware Test which should be either on your install disc #1 or #2, hold down the D key to run it.
Please post back with results,
Message was edited by: MGW

Can you connect via thunderbolt a mac book air 13" (2013) and a imac 21" (2013) together, using the iMac 21" as a 2nd screen

Can you connect via thunderbolt a mac book air 13" (2013) and a imac 21" (2013) together, using the iMac 21" as a 2nd screen

Welcome to Apple Support Communities
Of course. As both have Thunderbolt, it's as simple as buying a Thunderbolt cable, connect them and press Command and F2 keys on the iMac, so the iMac will be used as an external display for the MacBook Air. If you want more information, see > http://support.apple.com/kb/PH11302

I bought a bluetooth Bose speaker so I could listen to music from my imac in multiple rooms at the same time. I wanted to use BOTH my existing speakers using the headphone jack and add additional bluetooth speakers in other rooms, but the imac wants me to

I bought a bluetooth Bose speaker so I could listen to music from my imac in multiple rooms at the same time. I wanted to use BOTH my existing speakers using the headphone jack and add additional bluetooth speakers in other rooms, but the imac wants me to pick one or the other, is there a way to have both?

I asked same question
Any answers

Lightroom, 5.5, Mac version: lens metadata incomplete and/or inconsistent. Photos taken with the same camera and lens display the lens metadata differently in LR 5.5, but are the same in the original files

LR is putting different descriptions of the same lens, used with the same camera, in the metadata of photos taken on the same occasion.
For example:
The following two images were taken with the same camera and lens.
They were imported at the same time into LR by copying.
The only difference in treatment is that the first was an untouched out-of camera jpeg, the second had been flipped using Preview on the Mac.
The one that was flipped has a full description of the lens, the one that was untouched has an abbreviated description.
When you show the file in the Finder and read the metadata using Preview, the correct full lens description appears.
Why is LR displaying the metadata differently for these two files?

Can you zip up a few of your GoPro images, upload them to dropbox.com and post a share link, here, so others can experiment with them, or do you mean this issue is global to all camera models?

I have unlock my iPhone to travel and I came home to use the back up and now my phone won't accept the backup

I have unlock my iphone to travel and I came home to use the back up and now my phone won't accept the back up

How & who unlocked your iPhone?

I recently had to disable and enable all add-ons on Firefox. Now when I google something, when I hover over the website preview and click 'cached' it won't highlight the key terms anymore. How can I fix this?

I recently had to disable and enable all add-ons on Firefox. Now when I google something, when I hover over the website preview and click 'cached' it won't highlight the key terms anymore. How can I fix this?

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How can I make my Apple tv remote stop interacting with my MacBook and my iMac? Everytime I press the reote, the sound will go up or down on my computers or they will wake up.

How can I make my Apple tv remote stop interacting with my MacBook and my iMac? Everytime I press the reote, the sound will go up or down on my computers or they will wake up.

Welcome to the Apple community.
If you don't want to use a remote with your computer the easiest thing to do is just to turn the IR off. (System Preferences/Security/General)
If you still want to use your computer remote then you must pair your computers remote with the computer AND the Apple TV remote with the Apple TV.
To pair a remote with a device hold down the menu and FF buttons together for six seconds or until you see a chain icon on screen (best take the computer into another room, or turn it off, when you do this)

TS3274 My ipad will receive texts and emails but it won't send - the send button doesn't light up?

My iPad is about 1.5 years old. It just started this business of not sending. My ipad will receive texts and emails but it won't send - the send button doesn't light up? It has been updated. to 6.1 IOS.
Anyone have an idea what to do for this?

I would think this might be the case but I am trying to texting friends and family members with iphones.
I am really stymied.

My iPhone4 is broken and my phone company won't cover the damage. I am a student and I can't afford a new one..Will apple send me a new one?

My iPhone4 is broken and my phone company won't cover the damage. I am a student and I can't afford a new one..Will apple send me a new one?

No, you don't get a new iPhone simply because you cannot afford to replace it.
What do you mean it's "broken"? Is it physically broken? If so, warranty does not cover user damage.

HT4414 I downloaded Mac OS. Mavericks and now my laptop won't intall the program it's says disk error and I already open te utility and repaid the disk and still stuck on that intall screen wat can I do

I downloaded Mac OS. Mavericks and now my laptop won't intall the program it's says disk error and I already open te utility and repaid the disk and still stuck on that intall screen wat can I do

Why did you wipe the drive?
Were you having problems?
If you were those problem may be related to a failing hard drive and that is why the TM backup could be restored.
In you topic header you say the system won't boot from the SL DVD, But it di for you to wipe the drive. Then it should again boot from the SL DVD.
Insert the DVD and reboot, hold down the Option key and select the Optical drive, SL DVD, as the Boot source.

Color and style settings won't stay the same.....

I'm trying to get my type to stay the same color and style each time I start a new email to send to someone. I can set it each time I start a new message, but I want it to stay the same automatically when I open it up. Is that possible to do in mail?
1.6 GHz PowerPC G5 Mac OS X (10.3.9)

Hi,
I have had this problem.
It seems that iChat is more sensitive to small breaks in the network link. Web Browsers and Mail just don't show them as they make new connections each time they download mail or change pages.
If wireless try it wired for elimination purposes.
Check the time any DHCP server renews the leases.
8:49 PM Monday; February 26, 2007

30" Cinema and 24" IMac displays won't display the same color

Similar Messages

Maybe you are looking for