30 cinema display blinks three timed not working

30 monitor not turning on, it has power but blinks three times and cycles. wondering if could be power supply, adapter or port going bad

<https://support.apple.com/HT2811>

Similar Messages

  • Saved Shopping Cart Display/Edit functions are not working

    Hello SRM experts,
    The problem that I have is that the buttons like Display, Edit, etc are not working on a saved Shopping Cart. What is the best way to debug this problem? How would I find out what methods are being called on the SRM system or if some entries are missing in some table for BUS2121?
    We are on SRM 7.0 PPS SPS 5, Portal 7.01 SPS 5.0.
    Thanks,
    Mani

    Hi Mani,
    We are also facing a similar issue. Our protocol is HTTP throughout but still the issue persists.
    Can you shed some light on any other config that you changed?
    Regards,
    Nikhil

  • HT1338 Today when connecting my MB Pro Retina Display to my 27" LED Cinema Display instead of mirroring (which worked fine in the past) both screens are black with a large arrow cursor. I'm unable to resolve this. Anyone have a similar experience?

    Today when connecting my MB Pro Retina Display to my 27" LED Cinema Display instead of mirroring (which worked fine in the past) both screens are black with a large arrow cursor. I'm unable to resolve this. Anyone have a similar experience?

    I think what may be your main issue here is that the 2011
    server has the Intel integrated HD3000 and is is struggling
    to run both a Thuderbolt display and a second monitor.
    When looking at specs for Thunderbolt Display, it is stated
    that the 2011 Mini Server can only support one.  Adding that
    Dell monitor with 1920x1200 display may just be too many
    pixels for the HD3000 to handle.
    You may want to try setting the Dell to a lower resolution
    to test the theory to see what happens.  It is however,
    possible that any additional monitor when using the Thunderbolt
    display may over tax the HD3000 graphics.
    FWIW personally, I have been running a 2011 Mini Server w/ Thunderbolt
    display for almost a year now without any issues.  However, I don't
    use a second monitor.

  • Equium A300D - Toshiba ATI display driver upgrade is not working

    Hi
    Has anybody else found the Equium A300D PSAK2E Windows Vista 32 bit Toshiba ATI display driver download will not work from the download centre? If you choose run, the download causes the windows explorer to crash during the install and the upgrade fails, the same with save and the install does not self install.
    I have been trying to get the TV out S-Video port working. See thread on TV out not working. I have tried everything. has anybody else got this problem as Toshiba are unaware of any problems with the S Video TV out not working on this machine.
    Thanks Vince

    Hi,
    The down load downloads ok but when you try and unzip it, then install it halfay through you get an error message stating windows explorer has stopped working and it has crashed. The Graphic card then will not work. I have tried uninstalling all the ATI software and deleting the left over files but it still wont install.
    I have downloaded the programme from the ATI site and this installed ok and the graphic card is working. The s video tv port still will not work.
    I have gone into great detail on the post regarding the TV out not working about what i have done. When the s video lead is connected the computer can see the tv but will not output, when you try and enable the display the display will not enable. I have used the FN f5 key with no success, changed settings on the avi controller and display settings in the control panel
    I will take the machine back to where i bought it from next week and see if they can get it to work!

  • Air Display for Windows 7 not working

    I recently installed Air Display v1.6.1 for my iPad 2 and Air Display for Windows.
    Both my laptop and iPad are connected to the same WiFi.
    Whenever I click on my iPad's name in Air Display on my laptop, nothing happens. My iPad's screen still stays on the Air Display instruction screen with no flashing of the screen as I see on YouTube videos. Any help would be appreciated .

    dwinpenny wrote:
    Hi,
    Have a new IMac and am trying to get Isight working in a Parallels Windows 7 VM environment.
    Isight works fine in Mac OS (Skye, Oovoo, etc).
    Tried to install the drivers from the Mac OS disk (appleisightinstaller.exe) and they appear to be installed okay.
    BUT, while the device exists, I cant see any picture or when I click on settings get no settings to change. Additionally, the Isight led on the device never comes on.
    Anyone got any ideas as to what I should do.
    I have tried:
    1. De-installing the driver and reinstalling
    2. Have edited the registry in Windows to delete all references
    The reason I would like to get this working is I am trying to use Polycom PVX video conferencing software (I need it for work) and so my idea was to run it in a Parallels VM as its only available for Windows.
    Hope you can help
    Cheers
    Dave W
    Welcome to Discussions, Dave (dwinpenny)
    I don't use Windows®, but here are a couple things to consider if you have not already done so and do not get better help here.
    (1) Does this help you? http://kb.parallels.com/5028
    (2) Consider XMeeting as a possible OSX alternative for connecting to your work's Polycom system:
      http://xmeeting.sourceforge.net/pages/index.php
    EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2)  MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
    LED Cinema Display  G4 PowerBook 1.67GHz (10.4.11)  iBookSE 366MHz (10.3.9)  External iSight

  • Mini display port to DVI not working

    The mini display port of my late 2009 27" iMac is not working with DVI.  Using the same monitor, DVI cable, and mini display to DVI adapter, I can connect my Air with no problems.  So the monitor, adapter, and cable are fine.  I can also connect my iMac to the same monitor using a VGA cable and a mini display to VGA adapter.  So the problem clearly seems to be with my iMac.  Has anyone had similar problems?  Any advice?  I think the image quality of DVI is substantially better than VGA so I really would like to get this working.  But I don't think the difference is worth carrying my 27" monster into the Apple Store. I could buy a mini display to HDMI adapter, but I would rather not buy yet another adapter (I think I have about 15 already with my various idevices) - and it might not work either. The DVI setup is simple and really should be working.  I bought a monitor and also a HD TV with DVI ports specifically for this.  Thanks.

    Hello,
    Using the VGA connector, what resolution is set on the Monitor?
    Is there any input choices on the Monitor for port or source?

  • Mini Display port DVI adapter not working on Thunderbolt Port

    For some time I've been using a mini display port to DVI adapter on an slightly older MBP to connect to my HD TV.  I recently purchased a MBP with a Thunderbolt port and when I try to connect it to my TV via my mini-display-port-DVI adapter things are not working properly.  The MBP is seeing the Philips TV but it isn't listing all the display modes and I'm not able to send any video to it.  Does the Thunderbolt port require a new display port to DVI adapter?

    Let me be clearer; I've got the MDP-DVI adapter connected to a cable that is DVI on one end and HDMI on the other.  I've got both laptops so I can compare side by side.  I plug in the MDP-DVI adapter to the old laptop and all works well; I plug it into the new laptop and while the laptop does see the TV, the display modes for it are all 1080p which is wrong I don't see any desktop image on the TV unlike when I plug it into the older laptop.  This is very disappointing as I expect things to just work with Apple products.

  • Image display control scrolling does not work properly when zoomed in

    I am using a ROI on an image in the image display control. When zooming into the image to fine-adjust the positioning of the ROI, the image scrolling does not work properly. As far as I understand, the image should scroll automatically when the ROI is leaving the visible area. However, the scrolling behaviour seems to depend on the origin of the Labview panel, not the origin of the image display control, which might require to move the ROI way out of the visible area before the scrolling takes place. In other words: the coordinate system of the image display control is shifted with respect to the true visible image area, depending on where you place it on the front panel. As a consequence, when clicking on a ROI which is in the visible area, but is outside of what Labview thinks is the visible area, it might immediately jump to the left border of the image, making the positioning of the ROI really difficult.
    Has anyone noticed this behaviour, and what would be a reliable solution to avoid this? 
    Dirk

    Hello,
    no, I am not talking about the tools palette. Just place an image control with some image in it on a new VI front panel. Then, use the rectangle from the tools and select a ROI in the image. If you zoom in (using the magnification glass), and then grab the ROI and move it around, the image scroll with the ROI. So far, so good. If you now place the image control elsewhere on the panel, or add new control above it, resize the panel, etc. , this scrolling when moving the ROI will not work correctly if the origin (0,0) of the panel is far away from the image control.
    I have attached a VI for simplicity (although there is hardly any code in it).
    If you make a ROI and try to move it down, you will notice that scrolling starts if you move the mouse out to about 10cms below the image (depens on your screen, of course). After that, if you click on the ROI, the scroll bars and ROI might jump up to the upper end of the image. Imagine how annoying this is if you try to finely adjust the ROI position. 
    I think it is a bug in the implementation of the image display control.
    Thanks,
    Dirk
    Attachments:
    scrolling.vi ‏818 KB

  • External display monitor suddenly is not working; power is on

    Hello,
    My LG external monitor display suddenly is not working today. It powers on, and it says "analog power saving mode", and it is detected by my ibook G4. When I go to preferences, and show displays, it shows that two displays are active, my laptop "Color LCD" and my external, "L1932Tq". If the external is plugged in, it indicates that that is the system in use, though the external monitor is black and unresponding (except for power light which is on). I replaced all cords - the power cord and the mini VGA cord and it's connecting cord to the monitor, and there are no changes.
    Is this monitor just suddenly broken, perhaps through it's internal connection devices??
    Thanks!!
    alidocs

    Dear Shankar,
    Issue is solved. It was Program Error from SAP side.
    Now All the buttons are working fine and I am able to print PDF also.
    Solution is implement the note 2031585 - SAP NWBC ABAP Runtime Patch 40.
    System Details : ECC 6.0 NetWeiver 7.4 ,
                                EHP 7 , SP-Level 06
    Thanks a lot for all your suggestions.
    Regards,
    Namsheed.

  • I have a Cinema Display M8149. Will this work with the Mac mini?

    I have the first generation of Cinema Display M8149 and it is still working beautifully! I need to upgrade now my first gen G4 and I am wondering if I buy a mini will the display work with it? If yes, do I need to buy the newest mini or could I buy a used or refurbished older mini and have the monitor still work. What adapter would I need? Thank you!

    This
    http://en.wikipedia.org/wiki/Apple_Cinema_Display
    says the M8149 has the ACD connector (Apple Display Connector)
    The ACD looks like:
    http://en.wikipedia.org/wiki/Apple_Display_Connector

  • Adding and displaying a new JPanel -- not working as expected

    I'm starting my own new thread that is based on a problem discussed in another person's thread that can be found here in the New to Java forum titled "ActionListener:
    http://forum.java.sun.com/thread.jspa?threadID=5207301
    What I want to do: press a button which adds a new panel into another panel (the parentPane), and display the changes. The Actionlistener-derived class (AddPaneAction) for the button is in it's own file (it's not an internal class), and I pass a reference to the parentPane in the AddPaneAction's constructor as a parameter argument.
    What works: After the button is clicked the AddPaneAction's actionPerformed method is called without problem.
    What doesn't work: The new JPanel (called bluePanel) is not displayed as I thought it would be after I call
            parentPane.revalidate();  // this doesn't work
            parentPane.repaint(); 
    What also doesn't work: So I obtained a reference to the main app's JFrame (I called it myFrame) by recursively calling component.getParent( ), no problem there, and then tried (and failed to show the bluePanel with) this:
            myFrame.invalidate();  // I tried this with and without calling this method here
            myFrame.validate();  // I tried this with and without calling this method here
            myFrame.repaint();
    What finally works but confuses me: I got it to work but only after calling this:
            myFrame.pack(); 
            myFrame.repaint();But I didn't think that I needed to call pack to display the panel. So, what am I doing wrong? Why are my expectations not correct? Here's my complete code/SSCCE below. Many thanks in advance.
    Pete
    The ParentPane class:
    import java.awt.BorderLayout;
    import java.awt.Color;
    import javax.swing.BorderFactory;
    import javax.swing.JButton;
    import javax.swing.JFrame;
    import javax.swing.JPanel;
    public class ParentPane extends JPanel
        private JButton addPaneBtn = new JButton("Add new Pane");
        public ParentPane()
            super();
            setLayout(new BorderLayout());
            setBorder(BorderFactory.createEmptyBorder(5, 5, 5, 5));
            setBackground(Color.yellow);
            JPanel northPane = new JPanel();
            northPane.setBorder(BorderFactory.createEmptyBorder(5, 5, 5, 5));
            northPane.setBackground(Color.yellow);
            northPane.add(addPaneBtn);
            add(northPane, BorderLayout.NORTH);
            // add our actionlistener object and pass it a reference
            // to the main class which happens to be a JPanel (this)
            addPaneBtn.addActionListener(new AddPaneAction(this));
        public static void main(String[] args)
            javax.swing.SwingUtilities.invokeLater(new Runnable()
                public void run()
                    createAndShowGUI();
        private static void createAndShowGUI()
            JFrame frame = new JFrame("test add panel");
            frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
            frame.getContentPane().add(new ParentPane());
            frame.pack();
            frame.setVisible(true);
    } the AddPaneAction class:
    import java.awt.BorderLayout;
    import java.awt.Color;
    import java.awt.Component;
    import java.awt.Dimension;
    import java.awt.event.ActionEvent;
    import java.awt.event.ActionListener;
    import javax.swing.JFrame;
    import javax.swing.JLabel;
    import javax.swing.JPanel;
    import javax.swing.SwingConstants;
    public class AddPaneAction implements ActionListener
        private JPanel parentPane;
        private JFrame myFrame;
        public AddPaneAction(JPanel parentPane)
            this.parentPane = parentPane;
         * recursively get the JFrame that holds the parentPane panel.
        private JFrame getJFrame(Component comp)
            Component parentComponent = comp.getParent();
            if (parentComponent instanceof JFrame)
                return (JFrame)parentComponent;
            else
                return getJFrame(parentComponent);
        public void actionPerformed(ActionEvent arg0)
            JPanel bluePanel = new JPanel(new BorderLayout());
            bluePanel.setBackground(Color.blue);
            bluePanel.setPreferredSize(new Dimension(400, 300));
            JLabel myLabel = new JLabel("blue panel label");
            myLabel.setForeground(Color.LIGHT_GRAY);
            myLabel.setVerticalAlignment(SwingConstants.CENTER);
            myLabel.setHorizontalAlignment(SwingConstants.CENTER);
            bluePanel.add(myLabel, BorderLayout.CENTER);
            parentPane.add(bluePanel);
            myFrame = getJFrame(parentPane);
            //parentPane.revalidate();  // this doesn't work
            //parentPane.repaint(); 
            //myFrame.invalidate(); // and also this doesn't work
            //myFrame.validate();
            //myFrame.repaint();
            myFrame.pack();  // but this does!?
            myFrame.repaint();
    }

    For me (as it happens I'm using JDK 1.5.0_04) your code appears to work fine.
    It may be that we're seeing the same thing but interpreting it differently.
    1. When I run your application with your "working" code, and press the button then the JFrame resizes and the blue area appears.
    2. When I run your application with your "not working" code and press the button then the JFrame does not resize. If I manually resize it then the blue area is there.
    3. When I run your application with your "not working" code, resize it first and then press the button then the JFrame then the blue area is there.
    I interpret all of this as correct behaviour.
    Is this what you are seeing too?
    Are you expecting revalidate, repaint, invalidate or validate to resize your JFrame? I do not.
    As an aside, I do remember having problems with this kind of thing in earlier JVMs (e.g. various 1.2 and 1.3), but I haven't used it enough recently to know if your code would manifest one of the previous problems or not. Also I don't know if they've fixed any stuff in this area.

  • Ipad display issue - replaced still not working

    I replaced a LCD display on iPad 1 thinking it was bad.  Turned this unit on and it is still not working.  Tried the display on another iPad and it works fine so I know it is not the LCD.  The ipad in questions is recognized in iTunes.  Backlight doesn't come one

    There is obviously a hardware problem and doubtful if anyone here will know what that is.

  • Invoicing party display made through OMRMB not working

    Dear Experts,
    We have made the field RBKP-LIFNR invoicing party display only through OMRMB, but it is not working when you running MIRO.
    The field is still input only and the invoicing party can be changed at MIRO, what could be reason of not working.
    Client wants that field to be display only in MIRO.
    rgds

    is there any way if I can attach or modify one existing screen variant to standard transaction miro...since I do not want to change the tcode, this I have asked since omrmb is not working so only transaction variant is the way..
    Kindly suggest.
    rgds

  • 27" Cinema Display & 17" Macbook Pro not calibrating correctly

    I've had my 17" macbook pro hooked up to a 27" viewsonic LCD monitor for about a year.  The colors have never been right, as many times that I tried calabrating them through the built in Apple calabration system, or if I use my X-rite I1Disply 2.  Today, I bit the bullet and bought the 27" Apple Cinema Display and nothing changed, the colors are still off.  The monitor looks slightly warmer than the laptop. I'm a wedding photographer, so it can be frustrating not being able to use the bigger monitor to edit.  Thanks in advance for you help...

    Would changing the contrast help?  I don't know, I'm just asking, because there is a contrast control in the Universal Access preferences Seeing tab.

  • Timing not working on avi

    Hi - I created an avi file, but it is just running thru all the slides - the timing is not working.  Ultimately I'm trying to share what I created with a small group of people who don't have adobe viewer v. 9.  Would sending them flash files be a better option?  I think there might be issues running flash locally...I do have access to sitebuilder and could post the right kind of file there; I just want the timing to work.
    Thanks,
    Kelly

    Hi Kelly
    AVI files don't support any interactivity. That's why it's "just running thru all the slides". An AVI is equivalent to watching a VHS or DVD movie. Very passive.
    If you want the users to interact and you aren't certain that they have any ability to play Flash content, try the EXE option.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

Maybe you are looking for