30" Display worked fine then a 'pop' and now nothing.
Has anyone else experienced this? This monitor has not been used heavily and has been well cared for. There has been no signs of malfinctioning at all and then suddenly this happend. It wasn't a loud pop and there was no smoke or smell as if something burned out.
Any suggestions?
Thanks much
Jon
Daniel - Yeah that is what I was planning on doing. I am expecting a shrug and "We don't sell them anymore" comment from them but we'll see.
Zachery - "Clocking the device?" "Go to a phoe repair place?" I'm confused as to what you are even talking about.
Similar Messages
-
We bought this itouch for our daughter for Christmas (2011), It has worked fine all this time until now. All of a sudden it will not connect to our home wi fi. All the other ipods/iphones/laptops and desktop are connecting fine so I know it is not the router itself. I have tried all the standard troubleshooting tips (forgetting the network and resetting it on the ipod, turning it off an on, plugging it in and updating the software, we even restored it completely from itunes as a new ipod). It lists the network as available but then when you try to connect it just sits there with the little circle icon thing spinning, trying to connect but never does.Please help!
So you also rebooted your router correct? Does the iPod still connect okay to other networks?
B-rock -
I bought my dad a new ipod nano and a jbl wireless speaker from the same apple store. Everything worked perfectly with the bluetooth connectivity the first day. Then my dad accidentally hit the "forget this device" button when he was trying to turn the bluetooth off. Now the nano either does not recognize the device or it will recognize the device but not connect. I would appreciate any advice.
Does it charge on a computer? Does it appear in iTunes?
If so:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Also see:
- See:
iPod touch: Hardware troubleshooting
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic. -
My Ipad has worked fine for a year and now it won't play music or videos
My Ipad has suddenly stopped playing music and videos??
Swipe your phone to unlock and enter your passcode.
You needed to enter a passcode before using the touch id.
If you touch id isn't working, then erase the old print and re do it.
I use two prints and have no issues using it. -
I have a 3GS and since I did the IOS6 update my phone won't send pictures via text message. Anyone know how to fix this?
Do you have the Onavo app installed? If so, try removing it.
1. Go to your Settings app -> General -> Profiles
2. Locate the profile called "Onavo"
3. Tap Remove
4. Go back to your home screen and delete the Onavo Extend icon -
h
Paulietang do you know what files were deleted? Which Adobe software or service gives you the error? Have you tried removing and reinstalling the application?
-
Help! Getting iTunes Error 11503 and Error (-50) was working fine this morning and now nothing
My iTunes has been working fine until this afternoon and now when I go to download music I am getting error code 11503 or (-50) Help, please!
Here's a possible fix for Error 11503 and for error 50.
It worked for me and hopefully it will work for you.
I believe this error is caused by the incomplete downloading of either an update to an app, or perhaps a big music file. In my case it was caused by closing the lid on my laptop when I was downloading app updates on a very slow internet connection in a hotel.
Anyway, here is what I did that fixed it completely.
Close iTunes.
Go to this folder : /iTunes/Mobile Applications/Downloads
You'll find tmp files there. Drag them out of this folder to a temporary folder on your desktop. The Downloads folder should now be empty.
Restart iTunes.
All should be fine.
If it's not, then I can't help further, but that's what worked for me. -
2006 MBP os 10.6.8 has stopped working w/Cinema Display - worked fine until 3 days ago
Hello. Hope someone can help. My MacBook Pro 2006 Snow Leopard has worked fine when connected to external Cinema display monitor (mirrored display setting) up until 3 days ago. Now the external display remains dark (I've tried on different monitors with same result). Initially, I could restart the MBP, and the external display would restart, but that only worked a couple of times and now nothing. The MBP seems to "see" the monitor when I open system preferences, but the display remains dark. the MBP display is fine. Is there anything i can do to correct this, or is the problem with the the MBP being so old? I have ordered a new MBP and would like to keep this one as a secondary machine, but would like to limit expense to fix if I can.
Hello. Hope someone can help. My MacBook Pro 2006 Snow Leopard has worked fine when connected to external Cinema display monitor (mirrored display setting) up until 3 days ago. Now the external display remains dark (I've tried on different monitors with same result). Initially, I could restart the MBP, and the external display would restart, but that only worked a couple of times and now nothing. The MBP seems to "see" the monitor when I open system preferences, but the display remains dark. the MBP display is fine. Is there anything i can do to correct this, or is the problem with the the MBP being so old? I have ordered a new MBP and would like to keep this one as a secondary machine, but would like to limit expense to fix if I can.
-
This app was working fine, then suddenly it won't display any of the photos. One day the photos were there, gone the next. It still shows how many photos are there but just shows a white screen. I can't export anything to the photo album. Adding photos to existing folders yields the same result, only white screen displayed. However, I can create new albums and add photos to those without issue. Does anybody know how to recover the "missing" photo" I was going to try reinstalling the app but it's no longer available in the iTunes App Store. Thanks, Tracy
1, you can't at the moment, though with iOS 5 in the Autumn, from http://www.apple.com/ios/ios5/features.html#photos :
Even organize your photos in albums — right on your device
2, by removing it from you synced from and re-syncing. Only photos taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad (either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view)
3, the location of the photos that you synced to the iPad should be listed on the iPad's Photos tab when connected to your computer's iTunes.
4, you can copy the photos from your iPad to your computer : http://support.apple.com/kb/HT4083 . You should also be able to delete them from the iPad as part of the transfer process to your computer, and it's then your choice whether to add them to your sync photo list so as to copy them back to the iPad. Copying them to your computer would allow you to organise them into folders and therefore be able to sync them back into separate albums.
5, I don't use Dropbox either. There are some third-party browser apps in the iTunes App Store that allow you to download pages so that you can view them when offline e.g. Atomic Web (the whole page is saved within Atomic Web, it doesn't place a photo into the Photos app)
6, deleting content should help. If you remove an app from your iPad then you also remove the content that it's got on the iPad - so if you then decide to reinstall it back onto the iPad then you will need to manually add back any content that you want in it. None of the Apple built-in apps (including Photos) can be removed from the iPad -
I updated my ipad but had to skip the update to the icloud because it was not finished within 2 hours. The ipad worked fine then, but I turned it off. When I tried to turn it on again, it kept asking for the password over and over. What do I do now?
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Hi,
I just got familiar with my address book on my YouTube channel. I was adding contacts and everything was working fine then out of nowhere I got a Stop Script pop up notice. I am using Firefox. Now when I go to my address book on YouTube it freezes and I often have to use CTL + ALT + DLT to stop it and start over.
Is this a Firefox or YouTube problem? I tried looking at this page on IE and the same thing happens.You are telling us by yourself that is a Youtube problem, because it happens also on IE.
Anyway that may be an issue with your e-mail account. Maybe you have too many e-mails and YouTube gets so busy trying to add all of them. If you hadn't added them already, you could export that directions to CSV and divide the CSV in parts so YouTube wouldn't have so much work. How many directions you wanted to add? -
I am using a mini display to hdmi with my macbook and the display works fine. However, the sound will only play iTunes such as music and movies but when i go online to watch movies on youtube it will not play any sound. Please help
HDCP maybe? Read this http://www.macnn.com/articles/08/11/26/displayport.drm.conflict/
-
My phone was working fine, then just went completely blank, and now is totally unresponsive
Plug it in to mains power for at least 15 minutes. If it doesn't automatically come on, try a Reset... press the home and sleep/lock buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
-
I have an iphone 2g unlocked for tmobile. For the past 2 years it has worked fine then out of no where I get this message "your selected cellular network is no longer available" and the service cuts in and out all day. It can't find tmobile on my phone for some reason but for 2 years previous it could no problem? tmobile says it is a problem with my phone and not their service.
Any ideas what to do?I would just explain that this just started happening, that nothing has changed on the phone, that it is an original iPhone and I wondered if they are implementing a change in coverage with their Edge network in my area.
If you restore your phone, you will be given an option to back up your phone at the beginning of the process (see step 6 here: http://support.apple.com/kb/HT1414). You will be given the option to restore to that backup at the end of the restore process. Your messages are stored in the backup so restoring to the backup will return the messages to your phone. Be sure to import your photos and videos to your computer (see http://support.apple.com/kb/HT4083) and back up your contacts somewhere before restoring your phone as these sometimesget lost in the restore process. -
iPad 1 connects to iTunes and displays in the left column. All elements on iPad displayed. However, it will not sync. Displays message that the iPad is not connected. This is a new issue. Used to work fine. All iTines and iPad software up to date. Ran HELP diagnotsic in iTunes with iPad connected - no issues noted. Attempted soft reboot of iPad. No help.
Issue hopefully resolved. Required Apple store to delete all info from iPad and reinstall operating system. Had to reload all data, but it seems to be working fine. Cause unknown.
Maybe you are looking for
-
I am using the ECC/R3 "edition" of E-Commerce (ISA 5.0)...NOT the CRM flavor. I am trying to see if anyone has successfully configured the 'free goods' functionality. Although, all of the documentation I have seen confirms that ISA 5.0 supports it an
-
What are the major difference between ssis 2008 R2 and 2012
Hi, We are planning to upgrade some of the packages from 2008 to 2012. If someone would provide a few insight then it would be great. Thanks, sarat chandra sahoo
-
Preview Disabled after crossgrade
Hello. Well, I finally plunged into the deep end and installed 5.1 on my system with a clean install after staring at the crossgrade disks for weeks. I installed the Blackmagic drivers, fcp rescue etc. Unfortunately, when I now try to capture, I get
-
pls help me with this scenario , The idocs are coming from an external system called x in flat file . i have scjeduled the program rseinb00 to create the idocs . i have done the settings to process these idocs via idoc_input_orders. Now , if i have m
-
Are there any Universal Binary OpenEXR plug-ins for Photoshop CS3? The only one I can find is PowerPC only.