30 GB 5th Gen iPod Not Restoring

Yesterday I was about 20 minutes into a 2 hour trip and I pulled off at a rest stop. I had my iPod plugged into my Belkin charger and when I turned the car off, the iPod paused. When I turned the car back on, the iPod stayed paused and then reset itself and displayed the sad iPod. When I got home I connected my iPod and iTunes said I needed to restore it, but it couldn't restore. It hasn't been able to at all, and I'm tempted to format the thing in Disk Utility and try again. It generates error 1418.

Have you had a chance to look at this troubleshooting page? It may be of some help: Error 1415, 1417, 1418, or 1428 when restoring or updating an iPod in iTunes 7 or later

Similar Messages

  • 5th gen Ipod not playing in any docking station

    I have a 6th generation ipod classic that works great in my pioneer receiver and in both cars. I bought a 5th gen ipod on ebay for my wife and it seems to work just fine.
    I restored it using itunes, then put synced songs to it. Everything works fine when it's connected to Windows but it won't play in any docking station. It gets a charge from the station, but won't play.
    Does the 5th gen ipod not work in docking stations or is it possible mine isn't functioning right. I contacted the manufacturer of the station in one of the cars and they said all ipods should work.

    I have the same problem with a Pioneer X-HM50-K hifi system. My 5th gen ipod (system 1.3 which up-to-date iTunes claims is up-to-date, tried resetting/restoring/all that), when plugged into the docking bay, pauses the music and shows a tick mark after a while with the text "ok to disconnect" beneath it. The tick mark becomes a Pioneer logo after a while but that does not change the fact that the ipod does not react, neither to the command buttons on the Pioneer system (or on the remote control) nor to the buttons on the iPod itself (those do 'click', but have no effect). It does get charged, but doesn't play, just as in the top posting.
    A friend's iPod nano works just fine on the Pioneer, and my iPod works fine for everything else (headphones, iTunes, other docking systems I tried at friends', ...). So there seems to be a specific incompatibility with Pioneer systems.
    How can this problem be investigated and solved ?

  • 5th Gen Ipod not recognized by windows or itunes. Have tried it all. Any Ideas?

    Hello everyone. I have a 5th generation Ipod I recently purchased that I'm having what seems to be an common issue. When I connect the ipod to my computer via USB, the Ipod is not recognized in windows or Itunes. Occasionally the Ipod will charge when connected but not always. Though this is the same for the old wire I used and the new one I purchased today. Even when shown charging the Ipod is not recognized and there is no noise that a device has been connected. I have tried the 4 R's (without Restore) which I can't do, chaninging the drive letter, disabling start up software,uninstalling and reinstalling all Apple Software. I have tried connecting to another computer and have gotten the same result. When I check the diagnostic screen on the ipod it shows that a usb cable is detected. I have upgraded all my driver software, disabled and reenabled them. I'm almost 3 hours from the nearest store so that it out of the question. I'm curious if anyone has any other ideas and will try anything you think might be the issue and fix. Thank you for time.

    From my experience, the only way you're gonna get a PC afflicted with this disease to work with a 5th gen nano is to roll back to an earlier version of iTunes.  Those affected have been exhausted by this ongoing issue.  To update or not to update?  And I always say never update unless you have to, and turn off all that auto update mess!
    I have two core2duo lappies running 32b vista.  My workflow dictates 32b fyi.  One is acer aspire running itunes v 11.1 (.0.126),  5th gen nano was originally formatted and works just fine on this machine to this day.  My other is the bigger badder lenovo thinkpad and the 5th gen will NOT mount using any version of itunes past 11.0 (.1.12)  Windows mounts it just fine.  itunes is not having it.  no shirt no shoes no service.
    I have both a 4th and 5th gen nano.  The 4th gen works great on both machines, I even successfully tested it with the latest version (11.1.5) before subsequent deletion on the thinkpad!  Weird huh?  I think my next experiment might be to restore my 5th gen w/ a Mac and theeeeen plug it into PC itunez.
    I'm at a loss on the thinkpad.  Scanned for intruders.  Cut the Lenovo bloat.  Executed system and reg maintenance.  Took down msconfig to a safe mode + itunes level to attempt to resolve possible sw conflicts but to no avail.  NO NO NO.  Every single dang port, every time on the thinkpad.  Has me feeling like others might get the same treatment by the next itunes update.  :|
    So in summary for me:
    5th gen nano and thinkpad are a NoGo on 11.1^  last working version for me = 11.0.1
    5th gen nano is working on an acer aspire 11.1.0  but no way in the world am I updating
    4th gen nano is kicking 5th gen nano's @zz so what would make me want to buy a new ipod?

  • 5th gen. ipod not recognized by Mac

    My 5th generation 30 gb ipod is no longer recognized by my Mac running 10.3.9 and iTunes 7. I've tried all of the standard troubleshooting except for restore since it can't be recognized to be restored. When it's plugged into the computer, it's charging with an animated icon but the ipod never shows up on the desktop or in iTunes. Help!
    5th gen ipod   Mac OS X (10.3.9)  

    Try Resetting Your iPod while it's connected to the computer.
    Hold down the Menu and Select buttons until you see the Apple logo (or Menu & Play/Pause in older models).
    This will often get it recognized. It may take several attempts.
    Also See:
    Your Windows PC doesn't recognize iPod
    iPod does not appear in iTunes or on the desktop
    iPod appears in Windows Explorer but does not appear in iTunes

  • ITunes 7.3.2 (OSX) and 5th Gen iPod not synching

    I have had my 5th gen iPod (30GB) for about 2 years now and originally had used it with Windows, then I switched over to a Mac in Feb and have been pretty happy. Normally i synch my iPod daily to get my playlists updated (so I don't listen to the same thing all the time) and so I can get new Podcasts that were downloaded. Before I left for work this morning, I was able to synch my iPod with no problem, when I was about to synch it before I went to bed, it will not synch. When I try to put in the iPod, iTunes then crashes. I try to put in the iPod and let iTunes open automatically, it loads then crashes again. I have rebooted both the Mac and did a reset on my iPod, but can't even perform a restore since before iTunes would pop up the iPod section, it crashes first. it IS mac formatted. i don't know what is going on and what chnged from this morning to this evening and why suddenly it doesn't work.
    Anyone have any suggestions?

    I deleted both iTunes and Quicktime7, emptied the trash, restarted, then reinstalled QT then iTunes. Still getting the same issue. Still "crashing" when the iPod is connected.
    This is some of the information from the bug report that I thought might be helpful to figure out what went wrong (didn't want to include ALL the crash report, so I just included the info before the "thread crashed" details and the system info at the bottom):
    Date/Time: 2007-08-08 06:42:00.704 -0400
    OS Version: 10.4.10 (Build 8R218)
    Report Version: 4
    Command: iTunes
    Path: /Applications/iTunes.app/Contents/MacOS/iTunes
    Parent: WindowServer [66]
    Version: 7.3.2 (7.3.2)
    Build Version: 2
    Project Name: iTunes
    Source Version: 7320601
    PID: 289
    Thread: 0
    Exception: EXCBADACCESS (0x0001)
    Codes: KERNINVALIDADDRESS (0x0001) at 0x72133574
    Model: PowerMac10,1, BootROM 4.8.9f1, 1 processors, PowerPC G4 (1.1), 1.42 GHz, 1 GB
    Graphics: ATI Radeon 9200, ATY,RV280, AGP, 32 MB
    Memory Module: DIMM0/J11, 1 GB, DDR SDRAM, PC2700U-25330
    Modem: Jump, V.92, Version 1.0
    Bluetooth: Version 1.7.14f14, 2 service, 1 devices, 1 incoming serial ports
    Network Service: Built-in Ethernet, Ethernet, en0
    Parallel ATA Device: ST9808210A, 74.53 GB
    Parallel ATA Device: MATSHITACD-RW CW-8124
    USB Device: Hub, Up to 480 Mb/sec, 500 mA
    USB Device: iPod, Apple, Up to 480 Mb/sec, 500 mA
    USB Device: BCM2045A, Broadcom Corp, Up to 12 Mb/sec, 500 mA
    USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
    USB Device: Microsoft Optical Mouse with Tilt Wheel, Microsoft, Up to 1.5 Mb/sec, 100 mA
    USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
    USB Device: USB TO IDE, Up to 480 Mb/sec, 500 mA
    FireWire Device: unknown_device, 0xD0F5, Up to 400 Mb/sec
    (For the curious, the Broadcom device is a bluetooth adapter and the "unknown" FireWire device is an iBot from Orange Micro.)
    And when I verified the information about the file mentioned, it shows the same file size and date mentioned when you look at "get info".
    Any other suggestions?

  • ITunes crashes when connected to 5th gen iPod, not other iPods

    iTunes 6.0.1 crashes EVERY time it starts up with the new 5th gen iPod. Works fine with other iPods, or no iPod at all. Reinstalled iTunes and restored to version 1.0 iPod form the 11-17-2005 iPod updater. Reset nvram, fixed disk permissions, rebooted. Nothing works. iTunes will not run with the 5th gen iPod. Period.
    G4 Powerbook 17" 1 GB Ram   Mac OS X (10.4.3)  
    G4 Powerbook 17" 1 GB Ram   Mac OS X (10.4.3)  

    Have you tried re-installing the software that came with the 5th generation ipod?

  • 5th gen Ipod not recognized and not charging on any computer.

    Hello
    I have a 5th gen Ipod with an odd issue. I have an Ihome radio with Ipod dock in which my Ipod charges and plays everthing just fine. I usually just keep it there to charge and only hook up to my computer if I want to buy something or put other music on it. I tried syncing the other day and nothing happened, would not sync, charge, my computer would not even recognize it. I have tried 2 differnt cables, reset, have tried it with itunes started and not running on my vista computer and have also tried just to charge on a computer with XP that doesnt have Itunes installed. My daughter has in Ipod Touch that works just fine with both my cables and computers.
    Any ideas of whats wrong with my 5th gen?
    Thanks

    Try restarting your computer with your ipod plugged in. You might also try using a different USB port. If all else fails downgrade to itunes 6 here http://www.apple.com/support/
    kEat0n

  • 5th Gen iPod Not Being Recognized by iTunes

    5th Gen iPod w/Updater 1.3. iTunes Ver. 7.6.2.9
    Two weeks ago purchased music with no problems; sync'ed library w/iPod w/no problems.
    Purchased music a few days ago- no problems. Started iTunes today to sync iPod and got msg saying registry values missing for certain drivers for burning discs, etc. Cause could be from other programs that burn discs etc.(???)
    Plugged in iPod, got the tone beep and then a message that iTunes doesn't recognize the iPod attached. Disconnect and reattach. Did this several times - still doesn't work. I can play tunes from my iTunes library and my iPod OK - just can't sync them up. Anyone got a solution??
    Thanks, Unicorn39

    Well,after digging into the 1000's of msgs regarding problems similar to mine I found something I thought might help at (http://support.apple.com/kb/TS1538). I teied it and found that my drivers were OK so that wasn't the problem. While trying things I suddenly got the iPod recognized and it started sync'ing. I think the solution to my issue was to connect the iPod first; wait for it to be recognized by the pc (the tone beep) then go thru the acceptance of iTunes agreement, etc., iTunes then opened and the sync process began. I tried it with iTunes open and it won't work. It sounds like a hokey way to do it but at least I have my library and iPod in sync.
    My next problem to work on is there seems to be registry problem with iTunes drivers for importing and burning CD's. Got to figure that out and fix.
    Since I do have CopyTrans I may just re-install a back-level of iTunes and copy my iPod into the new iTunes library.
    Unicorn39

  • IPod Touch 5th Gen will not restore

    I have a brand new IPod Touch 5th Gen and I Tunes will not let me restore.  Am in an endless state of Recovery Mode.  I have the latest version of ITunes installed and the IPod Touch worked perfectly for two weeks after I got it.  Now when I try turning it on, all I see is a black screen and USB cord leading to the ITunes symbol.  I checked in Diagnostics and it says no IPod is detected, yet my IPod shows below Devices in ITunes.  I have tried 20 or so suggestions to fix the problem and nothing works, including holding down Sleep button (turn on) and Home button for many minutes.  Is there any way I can get ITunes to recognize my new IPod in the proper way?  Restoring process in ITunes just does not work.  Thank you.     I believe this Touch has the iOS 6.0.1.

    Try placing the iPod in DFU mode and then try restoring.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Next, make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • 5th gen ipod not recognized by windows, but old ipod min works fine.

    my new ipod is not recognized by windows at all. my old ipod mini works fine. i even uninstalled everything and tried reinstalling the new ipod. after that didnt work, i plugged in my mini, and it reinstalled perfectly.
    I also plugged my new 5th gen into another computer with itunes and it recognized it perfectly.
    is there some sort of software conflict between the mini and other ipods? this is driving me insane.

    Try Resetting Your iPod while it's connected to the computer.
    Hold down the Menu and Select buttons until you see the Apple logo (or Menu & Play/Pause in older models).
    This will often get it recognized. It may take several attempts.
    Also See:
    Your Windows PC doesn't recognize iPod
    iPod does not appear in iTunes or on the desktop
    iPod appears in Windows Explorer but does not appear in iTunes

  • New battery in 5th gen ipod not holding charge

    I just installed a new hard drive and a new battery in my ipod.
    The drive is a MK6008GAH from a samsung Q1 Ultra, so claims the ebay seller. The ipod switches on, displays the black screen with apple logo then just the sad ipod screen. I've tried leaving it to charge overnight but it makes no difference.
    I've been trying to put it into disk mode, I suceeded once, connected the ipod to my computer but the ipod froze before the computer recognised it. Any ideas what might be wrong? Perhaps a dud harddrive?

    I just had a similar problem with my brand new (bought yesterday) 60GB. At "apparently random" points, iTunes would just Unexpectedly Quit. I ended up syncing and stopping at every letter of the alphabet until all songs were copied. I never had this trouble with my 1st Gen iPod.

  • 5th gen IPOD not recognized by BMW

    Hi all, I just had the ipod adapter added to my 2007 BMW 550i.
    I plugged in my ipod video, and nothing happened. Mine is a 60gb ipod video, software version 1.2.3, model MA147LL.
    The engineer at the shop had the 30gb version of the same ipod. Same software, but the model is MA146LL. (I suspect that is the model number difference between the 30 and 60gb ipod).
    The engineer's IPOD worked just fine. When it was plugged in, the BMW logo appeared on the ipod's screen and all functions worked.
    With mine, the battery begins to charge but nothing else happens.
    I have 'restored' my ipod but that didn't make any difference.
    My wife's iPhone also works fine in the car, so I don't think the problem is in the car. (and of course neither does the autoshop, so they are no help further)
    Does anyone have any idea? Is there a list of what is compatible or not with various BMW's ?
    Is there some onboard firmware that can be updated on the ipod? (other than the software?)
    thanks for any input

    Buy a Saab.
    Just joking!!
    Did the engineer plug his iPod in before yours? I was thinking that perhaps your car has "married" up to the engineers iPod or something? Can the iPod adapter be reset?
    Also, you may like to try this link: (Expert iPod tips BMW North America) http://bmwusa.com/Standard/Content/Owner/ExpertTips/iPod.aspx
    Good luck with it, let us know how you go.
    Cheers,
    Adam

  • 5th Gen IPod not recognized by Windows

    My problem seems a bit similar to others but just not quite enough that I have to ask this. Sorry for the long post in advance.
    I sync'd my Ipod about ohhh a month ago and last charged it using my laptop (which doesn't have itunes installed on it). My Ipod was already set up to be a hard drive via the Itunes tools.
    Now, the problem is, is when I plug in my IPod to known good USB ports nothing at all happens. I have tried this so far:
    Reset my Ipod.
    Try another Cable. Another USB cable will not work but I can interestingly enough charge my Ipod with a car adapter I bought.
    Tried two very different PC's. One a laptop (HP) the other a home built pc.
    I checked my services.msc like some have suggested. Both Plug and pray and Terminal services are on.
    Only thing that I have installed recently between not working on this computer and working was Sims 2 Pets. The laptop has had no new software installed and still doesn't not see any device plugged into it.
    Did not update my Itunes until after the problem happened.
    So, I can charge and still listen to what I have on my ipod currently but never sync again. There some kind of limit to times you can plug your Ipod in or something?
    If anyone could help me on this I would be very greatful. I am planning on taking my ipod into an Apple store and see if they can do anything. At the moment I am angry and just want to go exchange the darn thing again.

    I went to the Apple store in my town today and had them test out my iPod on a mac there. No avail. Even the mac wouldn't recognize my iPod. He even forced it into Disk mode there and it still didn't work. The sales man suggested I contact apple care and get it replaced.
    Just as a note to what all I have tried since my last post, i tried another computer that did not have any of the current Windows updates (note: all systems I tested this on was WinXP) and that system didn't recognize it either. Nothing! it is as if Windows just ignores that anything is in the port... very fustrating.
    So I am going to try and get a replacement. I let you know if this solved my problem.

  • 5th gen ipod not recognized by itunes

    i just downloaded itunes 7, i have no clue what my last version of itunes was, and when i plug my ipod in the screen on the ipod has the 'do not disconnect screen' but itunes does not see my ipod.
    the ipod is however viewable in explorer (im using windows) and itunes recognized it when i plugged it in, until i downloaded itunes 7. any help is greatly appreceated

    Try restarting your computer with your ipod plugged in. You might also try using a different USB port. If all else fails downgrade to itunes 6 here http://www.apple.com/support/
    kEat0n

  • 5th Gen Ipod Not recognised by itunes or computer

    I have done all of the things recommended by apple e.g. reset ipod, toggle the hold switch and nothing has worked. It seems that it maybe my computer thats the problem as the ipod connected and loaded songs on my Dads computer and his is the same as mine. I rang apple and wiped everything ipod related off my computer and redid eveything but it still dosn't work.
    Soooo I Ran an ipod diagnostic test and this came up:
    The iPod Service Logging Information:
    [SERVICE: 0xD28,01:22:37 INFO] Started C:\Program Files\iPod\bin\iPodService.exe (Wed Nov 01 01:22:37 2006)
    [SERVICE: 0xD28,01:22:37 INFO] ##### iPodService starting as a service, version: 7.0.2.16
    [SERVICE: 0xD9C,01:22:39 INFO] Got signaled to go ahead... Starting device manager!
    [SERVICE: 0xDCC,01:22:39 INFO] Listener Window created
    [SERVICE: 0xDCC,01:22:57 INFO] [DevNodesChanged]
    [SERVICE: 0xDCC,01:23:34 INFO] [DevNodesChanged]
    [SERVICE: 0xDCC,01:23:34 INFO] [DevNodesChanged]
    I don't know what that means but it's my only lead and I can't say that down the phone! anyone help please before I smash the thing.

    Hello there, bradfordfan.
    The following Knowledge Base article provides some great information for troubleshooting your issue:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

Maybe you are looking for

  • CUBE Not getting All records from DSO

    Hi Experts , We have a situation where we have to load data from a DSO to a Cube . The DSO contains only 9 records and while we r loading the data into cube , the cube is only getting 2 records . Thus 7 records are missing. Also The Cube contains mor

  • MacBook Pro scratching and destroying DVD's

    I thought it was originally a faulty DVD but after the second time I knew something was up. The DVD kept ejecting and refusing to play on my MacBook so I decided to play it on a DVD player and the disc does not exist. This is the second time the disc

  • Canon 5d mark iii metering

    Get one stop difference when in manual mode between using viewfinder and using live mode.I tried what ever By disabling or enabling different things but no use. Any idea ?

  • [CS5.5] How to import a snippet into the specific page

    Hi, I've a snippet file that export from page index 1 but I want to import back to page index 0, and vice versa. Is that possible? Regard, Nat.

  • Itunes needs to install all the time.

    ever since i updated my itunes to the newest version every time i try to open it, it says that it needs to install after it installs it asks me to restart my computer. I restart and try to open it again and it prompts to install it again. What is goi