30 gig 5 gen. Titles don't show on slideshow pics.

I have connected iPod to TV to run slideshows. It works great for time spacing and transfer between pics. It does not show titles on any pics. Is this possible?

Not that I have found. You just see the picture and hear what ever music you applied to the slide show.
Here is a link from the apple support website on view a slide show with the ipod.
http://docs.info.apple.com/article.html?artnum=300251

Similar Messages

  • Titles don't show after moving project

    Anyone got any ideas?  I created a slideshow in PE7 with titles.  Worked fine and I rendered it to a WMV file.  I then moved the project to a different PC (same OS and version of PE) by copying the raw footage, the project folders and prel file.  The project opens fine on the new PC and behaves normally in all respects except that the titles are not visible when playing the slideshow within PE.  They are there on the second video track as well as the asset list and can be moved and edited normally.  While in edit mode (double click the title), they show superimposed over the slide as expected, but as soon as I drop out of edit mode and play the slideshow, they go invisible again.  Video level in the titles is at 100%.
    A second project (video instead of a slide show) was also moved at the same time and in the same way.  It also incorporates titles and they ARE visible when the project is played in PE.
    Did I perhaps miss copying a file that is not stored with the rest of the project?
    Paul
    PS:  What is with the "points" system?  When I created this post I was asked if it was a question.  Since it was, I said YES.  Then I saw when I posted it that I get one correct answer for 10 points or two helpful answers for 5 points.  Huh?  Or is it the other way around... I can GIVE 10 points for a correct answer?  Did I miss the "rules" somewhere?  Or are the points meaningless and I should just ignore them?
    Note that it said I had 15 minutes to unmark the post as a question, but I can't find anywhere to do that.  No, wait.... I found it and un-marked it.  Turns out that part of the verbiage that said I had 15 minutes to unmark the post as a question was a non-underlined link.  Not visible as a link unless you hover over it.  Un-marking the post as a question doesn't seem to have done anyting to the post..... so what is the point of the points?
    Not liking the new and "improved" forum much yet.  Too slow and too confusing.
    Message was edited by: paulgoelz

    Hmmmm.... I was not aware that titles could be enabled or disabled.  I'll have to look.  That would certainly fit the symptoms.
    If by opacity you mean the video level line, yes it is at 100%.
    As for exporting titles, there are quire a few.... too cumbersome to one at a time.
    FWIW, I had this typed up before lunch but when I posted it, the process froze.  I finally gave up and closed the browser and went to lunch.  Fortunately, I have gotten in the habit of hitting <CTL> C before posting so after lunch I was able to paste the text into a new reply window.  Let's see if it works this time......
    I appreciate that this forum is here but I have to say that I don't read it anywhere near as often as I used to because it is so painfully slow.  I still think it is a Java thing.... when it is slow and unresponsive, CPU is maxed out.  Definitely not acceptable for a page that is after all mostly static text.  But I have to say that is par for the course in my experience with PE.  Sorry, I just could NOT resist.....
    No on the points... I unmarked it as a question thinking (falsely, it turns out) that there might be a points "budget" and I was only allowed so many.  I have seen that on other support forums.
    Maybe I'll go to a lesser used forum and create a second identity and then answer my own questions and rack up points.  How silly.
    Paul
    Message was edited by: paulgoelz (speling)

  • Movie titles don't show on thumbnails in IPad

    Since "upgrading" to OS 7.04 I can't see the thumbnail titles on my videos in the IPad.  I can see them in my computer library; but they won't sync over to my iPad like they use to.  Any ideas?

    Not that I have found. You just see the picture and hear what ever music you applied to the slide show.
    Here is a link from the apple support website on view a slide show with the ipod.
    http://docs.info.apple.com/article.html?artnum=300251

  • Uploaded music titles from my computer, but the titles don't show under musik

    unfortunately i still use windows xp (service pack 3) and not windows 7. therefore i can't use the icloud, if i understood the instructions correctly. so i tried to upload my music from my computer to itunes, but it somehow didn't work. can anybody help me. i'm sure i did something wrong but can't find any help under the itunes help. thanks in advance.

    thank you so much. i did exactly what you recommended and now it works! got my iphone 5 today so i am a total newbie... and to make things worse i'm german and everything on the iphone is in german. but i found it. absolutely happy now!!!!!

  • Portrait Photos don't show in Slideshows...

    Okay, so I was making a Slideshow to send to iDVD when I noticed that while previewing the show, none of my portrait photos were showing up. The landscapes, however, were OK. After going back to the portraits, I saw that for every single portrait, a gray box with an exclamation point took the place of the photo. I tried remaking the slideshow many times, but I always got this error. What's going on and how can I fix this?

    That is a very likely cause for the issue you're having, yes.
    Using iPhoto Diet to tamper with the iPhoto Library Folder is not a recommended activity. It is strongly advised that you do not move, change or in anyway alter things in the iPhoto Library Folder as this can cause the application to fail and even lead to data loss.
    If space is an issue then the best solution is to use a firewire external HD and run your library from there.
    If you don't want - or need - version control (the ability to revert to the original image) then my best advice is to use another Photo Organiser. Version Control is at the heart of iPhoto and trying to defeat it is - as you're discovering - a risky business.
    Regards
    TD

  • Images don't show on slideshow screen

    Do the IPhoto files have to be in a certain order in specific files. I was making a slideshow and trying to organize them and my slideshow worked find and then suddenly, all of the images show at the top but the screen is black. Can anyone tell me where the file needs to be or what I've done wrong. Thanks

    redchick,
    Are you saying you did your own organization in the iPhoto Library folder that is in your Pictures folder. If you did, then read these links...
    Two Apple kbs for you to read
    Don't tamper with files in the iPhoto library folder
    About the iPhoto Library folder
    since you have very little you can start all over and import the images from the old library.
    Close iPhoto
    Rename your messed up iPhoto Library to "iPhoto Library_old"
    Drag this library to your desktop
    Hold down the Option key and launch iPhoto
    This is the window you will get
    Create a new library or choose a library to open
    Choose to create a new library
    Once this new empty library is open it is time to import the images from your old library
    Go to File>add to library
    Navigate to the old library on your desktop and highlight it in the window, then click the "open" button.
    iPhoto will start importing the images from your old library
    This is what to expect:
    Your images will be imported in nice dated rolls. (make sure your view is set to sort by rolls to see it) There are a couple of caveats to this. You will get rolls named "Originals" These rolls will contain your video clips and your original images that you had edited. If you had RAW files they would be in those rolls too (I don't do RAW, so I don't know for sure) Delete what you don't want from those rolls. You will also get the jpeg pointer files to your video clips imported. They will just be jpegs and will not point to the video clips anymore as iPhoto made new ones when the clips were imported again. You can delete those. they should be in a roll right next to the newly imported video clips so they are not hard to find. The thumbnail files don't get imported as iPhoto makes new ones when the images are imported.
    Once all you images have been imported, check through the library and make sure everything looks ok.
    You can now start making your Albums, and do your keywords or any other organizational steps.
    You can also delete the old library on the desktop.
    It is also a good time to backup this new library to CD/DVD by burning the iPhoto LIbrary folder in the Finder, or copying the iPhoto Library folder to an external drive formatted for Macs, or copying the iPhoto LIbrary folder to an iPod.
    Good luck and keep me updated on your progress!
    Lori

  • Some songs don't show up on iPod, but they are there

    I have an 80GB iPod classic. I have all my songs in iTunes, and I have manually synced them to my iPod. When I view my iPod through iTunes, I can see all the songs and play them. However, when I look on my iPod directly, some songs don't show up when I browse by Artist, Song, etc.
    The only way to play them on my iPod is to add them to a Playlist, and then they are accessible. However, if I want to listen to Eminem, for instance, I want to just browse to it in the Artist area.
    The songs do have all of the appropriate info, and I have tried Restore and still nothing. These songs used to show up on my old, original iPod, so I am for a complete loss. Please help!

    This isn't foolproof but there are usually two things that contribute to songs not appearing under Artist on the iPod, both due to information either in or missing from the Get Info>Info tab against the song in iTunes. 1) the song has no album name associated with it or 2) the song is marked as part of a compilation.
    If tracks are missing an Album name (as mentioned above) in the Info tab, this information needs to be filled in. The no album one is a bit quirky as the songs will appear under certain circumstances but the simplest remedy is just add None or Miscellaneous in place of a title. See this link for more detail: I don't see some of my songs when browsing by artist on my iPod
    Also if the tracks are ticked in the Get Info>Info tab as part of a compilation, they will not appear under Artist on the iPod. Highlight a song in iTunes that you know is not appearing correctly on your iPod. Right click on it and choose Get Info and click the Info tab (alternatively choose Get Info from the File menu), if "Part of a Compilation" is marked untick it and afterwards update your iPod, you should find it now appears as normal. Compilations are stored in a separate folder in iTunes so the songs don't appear inside the normal Artist>Album folder which may be why this happens.

  • Ipod on Xbox 360, some songs don't show up

    I recently bought an Xbox 360, I have been using my Ipod to listen to music but some songs don't show up in Xbox playlist, particularly the music I have bought and downloaded from Itunes music store, Is it some kind of protected format, what can I do to fix it, any help would be great, thanks

    This isn't foolproof but there are usually two things that contribute to songs not appearing under Artist on the iPod, both due to information either in or missing from the Get Info>Info tab against the song in iTunes. 1) the song has no album name associated with it or 2) the song is marked as part of a compilation.
    If tracks are missing an Album name (as mentioned above) in the Info tab, this information needs to be filled in. The no album one is a bit quirky as the songs will appear under certain circumstances but the simplest remedy is just add None or Miscellaneous in place of a title. See this link for more detail: I don't see some of my songs when browsing by artist on my iPod
    Also if the tracks are ticked in the Get Info>Info tab as part of a compilation, they will not appear under Artist on the iPod. Highlight a song in iTunes that you know is not appearing correctly on your iPod. Right click on it and choose Get Info and click the Info tab (alternatively choose Get Info from the File menu), if "Part of a Compilation" is marked untick it and afterwards update your iPod, you should find it now appears as normal. Compilations are stored in a separate folder in iTunes so the songs don't appear inside the normal Artist>Album folder which may be why this happens.

  • ITunes Plus   Old songs don't show up for upgrades

    I occasionally stumble across previously purchased songs, for example "Time of the Season" by the Zombies, which are now in the plus format. They don't show up in the "Upgrade My Library" area in the store.
    There are also lots of cases where old cuts have slightly different listings and don't match up to what's in my library.
    Is there anyway to get Apple to allow me to upgrade to the Plus versions of these songs?

    "Note that the track usually will have to be the exact same version"
    Ever since iTunes began, there have been problems where the person ripping the music isn't very accurate as to the MP3 tags, and later the titles themselves.
    For example (just making this one up) "Yellow Submarine", 3minutes, Beatles Yellow Submarine can change to "Yellow Submarine", 3 minutes, THE Beatles.... and then it won't show up as a match.
    You will find LOTS of these examples if you search on titles you bought more than a year ago, and even though the song is there, it will say "no longer available" just because someone typed the title differently.

  • My Ipod Touch Gen 5 will not show up in Itunes but it shows up under "My Computer" help!

    I have a new Ipod touch gen 5. It shows up under my computer but not under devices in the side bar like it should with Itunes 11. I'm running the latest firmware for my new Itouch and the latest Itunes. I hope I don't have to uninstall my itunes as I have ALOT of music on it. I dont wanna lose it all. I'm running windows 8 and followed the tutorial to a "T" to try to fix the problem but nothing worked. I did everything except the last step. Even checking my Computer for Updates (Itunes will not run if updates to my PC are needed). Help Please!

    Here is the Diagnostic Report. I don't understand it very well.
    Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
    Hewlett-Packard HP 2000 Notebook PC
    iTunes 11.0.2.26
    QuickTime 7.7.3
    FairPlay 2.3.31
    Apple Application Support 2.3.3
    iPod Updater Library 10.0d2
    VoiceOver Kit 1.4.2 (222093/222742)
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.1.0.13
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 008BBCB0094EF9B0
    Current user is not an administrator.
    The current local date and time is 2013-04-04 22:41:18.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:          {2CAAFB10-5680-46C7-8613-2EDADF28585D}
    Description:          Microsoft Hosted Network Virtual Adapter
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Wed Dec 31 19:00:00 1969
    Lease Expires:          Wed Dec 31 19:00:00 1969
    DNS Servers:
    Adapter Name:          {5CE73756-BD5A-4D93-9DF9-A9316C4A6ED7}
    Description:          Microsoft Wi-Fi Direct Virtual Adapter
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Wed Dec 31 19:00:00 1969
    Lease Expires:          Wed Dec 31 19:00:00 1969
    DNS Servers:
    Adapter Name:          {4CDB268D-46F1-4C51-AAC1-A9F6B76B50F2}
    Description:          Qualcomm Atheros AR9485 802.11b/g/n WiFi Adapter
    IP Address:          192.168.1.125
    Subnet Mask:          255.255.255.0
    Default Gateway:          192.168.1.1
    DHCP Enabled:          Yes
    DHCP Server:          192.168.1.1
    Lease Obtained:          Thu Apr 04 21:42:42 2013
    Lease Expires:          Fri Apr 05 21:42:42 2013
    DNS Servers:          209.18.47.61
                        209.18.47.62
                        192.168.1.1
    Adapter Name:          {406A6EC4-A42A-4564-810E-0501F8EED96A}
    Description:          Realtek PCIe FE Family Controller
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          No
    DHCP Server:
    Lease Obtained:          Wed Dec 31 19:00:00 1969
    Lease Expires:          Wed Dec 31 19:00:00 1969
    DNS Servers:
    Active Connection:          LAN Connection
    Connected:          Yes
    Online:                    Yes
    Using Modem:          No
    Using LAN:          Yes
    Using Proxy:          No
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2013-04-04 22:24:30.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.3.0),
    E: hp DVD A  DS8A8SH, Rev KH62
    Drive is empty.
    The last failed audio CD burn had error code 4280(0x000010b8). It happened on drive E: hp DVD A  DS8A8SH on CDR media at speed 10X.
    **** Device Connectivity Tests ****
    iPodService 11.0.2.26 (x64) is currently running.
    iTunesHelper 11.0.2.26 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    No Universal Serial Bus Controller found.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Devices Not Currently Connected:
    iPod shuffle (4th Generation) running firmware version 1.0.1
    Serial Number:          CC4H77LFDFDP
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

  • TS1702 i if use "search" in music on my ipod touch 5th gen the result just show only album and playlist but nothing song result.whats wrong with it?please help

    i if use "search" in music on my ipod touch 5th gen the result just show only album and playlist but nothing song result.whats wrong with it?please help

    The users guide says:
    Spotlight searches the following:
    Contacts—All content
    Apps—Titles
    Music—Names of songs, artists, and albums, and the titles of podcasts and videos
    Podcasts—Titles
    Videos—Titles
    Audiobooks—Titles
    Notes—Text of notes
    Calendar (Events)—Event titles, invitees, locations, and notes
    Mail—To, From, and Subject fields of all accounts (the text of messages isn’t searched)
    Reminders—Titles
    Messages—Names and text of messages
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsynce all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • IPod Songs Don't Show Up in iTunes After iTunes 6.0.2 "Upgrade"

    After installing iLife '06, and the iTunes 6.0.2 "upgrade" that came with it, the contents of my 4th Gen. 40 Gb iPod don't show up in iTunes. The iPod mounts on the Desktop OK, and even shows up in the Source list in iTunes 6.0.2. And I can unmount the iPod by clicking on the little up arrow icon in iTunes. But iTunes reports only 919.2 Mb used and 36.33 Gb free in the iPod.
    I tried copying a song from my iTunes Library to the iPod, and it showed up in iTunes. But when I unmounted, then remounted, the iPod, it no longer showed in iTunes. It was on the iPod, however.
    I tried upgrading to the latest iPod software (iPod Updater 2006-01-10) but that didn't help.
    I ran Software Update and it didn't find any software that needed updating.
    I repaired disk permissions and Shutdown, then powered back up and restarted. Nada.
    The iPod mounts fine on my G4 AlBook running iTunes 4.9, and the contents of the iPod are also visible in iTunes 4.9, so I'm pretty sure it's not a problem on the iPod.
    Don't know if it matters, but all of the music on my Mac and on the iPod was ripped by iTunes from CDs (that I own).
    Anybody else seeing this?
    Is there a fix?
    TIA,
    Scot
    G5 2.5 GHz   Mac OS X (10.4.4)  
    G5 2.5 GHz   Mac OS X (10.4.2)  
    G5 2.5 GHz   Mac OS X (10.4.2)  
    G5 2.5 GHz   Mac OS X (10.4.4)  

    This might be a quick and dirty method.
    We're trying to force iTunes to rebuild properly.
    With iTunes not running. Make a copy of the library database file (iTunes Library).
    Try deleting the iTunes Library file. Start iTunes. Does this then show the missing tracks? To get the original playlists back you can import from the original xml file that you saved.
    If you need to get back to the start point just delete the newly created database and .xml files and go back to the originals.
    Powermac G5 DP 2.3 GHz   Mac OS X (10.4.7)   4.5 GByte RAM

  • Why Premiere Title don´t see my new True Type fonts?

    I´ve installed several new true type fonts but Premiere´s Title don´s see them. What can I do to fix it?
    Thanks.

    Ann,
    I think that I missed something in your commets. Please help me understand. On my workstation, I've got over 9K Fonts. These are in my C:\Fonts\PS_Fonts, \\TT_Fonts and \\OTF_Fonts folders. The only ones that show up in any program are the ones that are "installed" in my system. I cannot "test drive" any of the non-installed in any program, that I know of, except, of course, Extensis Suitcase.
    What am I missing? Maybe, I'm about to learn something really new and neat?
    Thanks,
    Hunt
    PS to the OP, do you have a list of the Fonts, that are not showing up? I'd be curious to see what they are. I've seen times that some of the Asian Fonts did not show, even when properly installed. There is a "patch" from MS for those, but cannot find the link. I believe that some Arabic Fonts also need a special "patch" from MS. Do any of yours fall into these catagories?

  • Changes to PSDs in LR4 don't show up in bridge or photoshop.

    I just downloaded ACR 6.7, now tiff adjustments  in LR4 (PV2012) show up in bridge and photoshop when I save the metadata to file in LR4, PSD adjustments in LR4 don't show up. I'm running CS5.

    Peggy, your post fixed this problem for me.
    My guess would be that the Pages folder in the Mobile Documents folder on your Mac is corrupt. That does seem to happen more with the Pages folder than the other folders in there. The Mobile Documents folder is on the first level of your user library. The user's Library is hidden in Lion but it is easy to open. In Finder, hold down the Option key while clicking on the Go menu & your user Library will appear about halfway down the list. Move the com~apple~Pages folder to your desktop & restart Pages. A new com~apple~Pages folder should be created with copies of the files from iCloud. If it doesn't repopulate, you can open the copies in the folder you moved to the desktop & again move them to iCloud by clicking on the document title.
    Saving the files locally to your hard drive & then moving them to iCloud seems to have less problems with corruption of this folder.

  • New Photos Don't Show On My Apple TV -- Is There a limit? An "Update" button? ...?

    I have my Apple TV 2nd gen set so that after two minutes is shows photos from my computer as screensaver.
    I have an album in iPhoto where I drag the photos I want and I've told the Apple TV to pick up those photos.  Has always worked fine.
    Recently I added some pictures to that album but they don't show on the Apple TV -- just the previous photos are on display.  Is there a limit?  There are 94 photos in that album.  Have I forgotten some sort of "update" button? ...
    All the settings both on the Apple TV and my iTunes look fine and I recently ran whatever update Apple wanted me to (I had this photo hiccup both before and after that upgrade so that ain't it).
    Any suggestions?
    Thanks

    Possible iTunes issue:
    Try the following after adding photos.
    Go to file
    Then Home Sharing
    Select photos to share
    Click on All Photos already selected Do anyway
    When Apply turns black click on Apply
    Now go to Apple TV to see if photos there
    Or restart iTunes.
    Works for me every time photos do not appear on my Apple TV 3
    Hopefully will work for you.

Maybe you are looking for