30 Inch Cinema Display with Vertical Streaks

Hi All,
I've started to notice very pale vertical streaks on my screen. So far, they seem to be along the edges and are particularly visible when blues and other dark colors are displayed.
It's not a big deal, but the monitor was about $2,000 and is only about 2 years old.
What is this? Is it "normal"?
I have Apple Care... thinking it might be time to use it!
Thanks,
Robert

Robert, My 30 Apple monitor started with blueish-green vertical lines outlining the texture of my desktop. It is present on photo's, web-pages and even video I may review. Please send me your email and I can send you one of my photo's to see if your problem is the same. I will be meeting with Apple Support tomorrow for help. Sincerely, Joe Ray at: [email protected]

Similar Messages

30 Inch Cinema Display with 5 Year old G5 Tower!

I'm trying to get the 30 inch apple cinema display to work with the G5 that i've had for about 5 years. it won't push up to the required resolution and i just can't switch the cable to the other slot. is there a solution. can i even use this monitor with that older machine? please advise.

Hi-
Welcome to Discussions!
You need a dual link DVI port equipped graphics card to drive the 30" at optimal resolution.
What graphics card is currently installed?

I have an old 23 inch cinema display will it be compadible with the new retina MacBook pro?

So I have an old 23 inch cinema display from 2006 and it's been in our basement for a few years and I'm going to buy the new MacBook pro with retina display I'm wondering if these 2 products will be compatible so I could work at my desk the display Powers up fine I just need to know if they're compatible ?

Assuming your 23" Cinema Display has a DVI connector or a built-in DVI cable, all you'll need will be a mini-displayport-to-single-link-DVI adapter or cable, and the display should work well.

Can't synchronize my IPod with the USB-Port of my 27 Inch Cinema Display

I use a 27" Cinema Display with my Windows PC.
It is connected via USB and Display Port.
Synchronizing my IPod at the USB Port of the PC works fine.
Synchronizing my IPod at each of the three USB Ports of the Cinema Display doesn't work.
Any suggestions?
Thanks Stephan

Sorry if there is any missing information. I'll try to put all requested information:
The car system is the one that is already installed in my car, I mean it is not something bought externally and installed in my car. The car is a ford S-Max. This car has a complete radio system that includes a USB connection for mp3 players. It works ok but not with the iPod. The IOS installed is the last that has been released, but the iPod was not working with this connection before that update.

Installation of 27" cinema display with macbook pro silver key and bootcamp

For everyone out there who may be interested in using the new 27" cinema display with an older Macbook Pro Intel with silver keys and bootcamp.
What is needed:
1. Apple 27" cinema display.
2. Macbook pro Intel silver key model
3. Altona Dual Link DVI to Mini DisplayPort Converter (Model AT-DP400)
4. Bootcamp 3.1 drivers from Mac OSX Snow Leopard V10.6.3(retail)
Procedure:
1. Update your display software on the Mac OS side. Apple has posted an update on their software downloads page, "LED Cinema Display Software Update 1.0" After doing so, make sure that the 27" CinDisp is operating correctly and you can change the brightness from the system settings.
2. On the Windows side, install the bootcamp 3.1 drivers. These are on the Snow Leopard distribution CD. However, there is a bug in the .msi installer that causes the installation to go into an endless loop. This must be resolved during the installation of the drivers. The following article discribes how to do this:
http://discussions.apple.com/thread.jspa?threadID=2305631&tstart=0
3. After you have successfully installed the bootcamp 3.1 drivers, then install Apple's bootcamp update: "Apple Magic Trackpad and 27-inch LED Cinema Display Update for Windows 32 bit".
Good luck, it works!

I have the same MBP and recently bought a 23" cinema display on Craigslist for $140. It works great. I had a display port to DVI adapter and it worked fine. Built a stand to hold the laptop vertically so it's out of the way. Don't know about older displays but anything with DVI should work fine.
The screen size and resolution are great for photo editing. I now have the best of both worlds, a display that rivals my wife's iMac and portability.

Can I use a 30" Apple Cinema display with a new 27" iMac?

I have a brand new iMac(27-inch, Late 2013), OS X Mountain Lion (10.8), i7 3.5 GHz, 32MB RAM, 4GB NVIDIA. I will soon be upgrading it to Mavericks, if that makes a difference. My understanding is that the resolution on it is 2560 x 1440.
I'm looking at buying a used 30" Apple Cinema display. I'd like to use it with my new iMac. The only advantage for me would be that the 30" screen is larger and things on it easier to see (or so I'm guessing).
I need to know if the 30" Cinema display would work with my new iMac, and if it would, as I'm guessing, give me a larger, easier-to-see screen.
I currently have my new iMac connected to my old mid-2010 iMac as a target display (that old iMac has a minidisplay port--no Thunderbolt), and that works great. I just want a larger screen.
I called Apple support, and the tech rep wasn't sure it would work. He seemed to think that the 30" Cinema displays were made with different connections. Some had minidisplay ports (which he thought would work), and some a cord built into them that provided some other type of connection (that I guess would not work as far as he knew).
Can anyone tell me if this would work? Would my new iMac and its video card support the 30" Cinema display? Would the result be as sharp and good-looking as my iMac's built-in 27" display, but only bigger (which is what I'm hoping for)? Any advice is appreciated.
I don't yet know many of the specifics of the 30" Cinema display I'm considering. I know it is about 3 years old. And here is a picture of the back of it:

Yes, you should be able use the 30" Cinema Display with your new iMac without problems. You'll need a mini-DisplayPort to Dual-Link DVI adapter:
http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter
I haven't had the 30" myself to test so I don't know if there any caveats. Perhaps someone else here will have personal experience.
Regards.

Is it possible to attach Samsung Monitor to the 27 inch Cinema Display?

Hello,
I have an Apple 27 inch Cinema Display and I also have a Samsung 27 inch monitor.
I would like to know if it's possible to create a dual monitor setup by connecting the Samsung monitor (dvi or hdmi) with an adapter to the Cinema Display's mini display port on the back?
Does anyone know if this is possible? Or does it only work with another Cinema Display?
I'd appreciate any help received.
Thanks,

Is it possible to connect the PC to the Samsung monitor via Dual link DVI and to the Apple Cinema Display via mini display port and work as a dual monitor setup?
That should work if the PC has both DisplayPort and dual-link DVI (or two DisplayPorts).
I'm thinking the best solution for MacBook Air is to purchase a Thundebolt display and hook that up to the Cinema Display and I think then I would have a dual screen setup at full resolution.
That will work if you connect a Thunderbolt disk drive (with two Thunderbolt ports) between the Thunderbolt display and the Mini DisplayPort display.
But currently I don't think there is a way to connect a PC to a Thunderbolt Display.
Not unless the PC has Thunderbolt.

Random screen blackout 2009 24 inch Cinema Display... HELP.

Random screen blackouts with 24 inch Cinema Display (purchased 2009). Never used with anything but same Macbook Pro (2009). No hardware changes on MBP. Just started June 6, 2012. Super annoying. Anyone else having this issue? Recommendations?

Hello, Ertjie.
The link titled Download the 24-inch LED Cinema Display Update from the kb/TS4045 article worked for me when I tried it today. Click the "Download" link I post here or try the one in the kb article again. Perhaps it will work for you now?
However, I note that the kb article expressly states that this firmware update:
...is only intended for use with and will only install on the Apple 24-inch LED Cinema Display while the display is connected to a Thunderbolt-enabled Mac. (EZ Jim emphasis added)
If your Mac is really using Mac OS X (10.6.8) as shown in your initial topic posting, your Mac may not be Thunderbolt-enabled. If so, contact Apple or your Apple-Authorized Service Provider for help.
Message was edited by: EZ Jim
Mac OSX 10.8.3

What happened to the 30 inch Cinema display?

What happened to the 30 inch Cinema display?
I went into the Apple store to purchase one, all they had was the (too small) 27 inch with the ugly black border.
I did find a few used 30 inch Cinema displays on ebay, they are over $1100 USED.
Any suggestions, for a 30 inch display?

No suggestions, apart from changing to a non-Apple display such as a LaCie one.
I think Apple really makes a mistake with the new displays - they are nifty, granted, if you want to watch TV or the like, but they'll loose the professionals, working all day long with their displays.
1. the new displays have an excellent resolution, no trouble there, but they are like mirrors, reflecting lamps, etc. and very tiring for the eyes. That's already a problem with my MacBook Pro but I've got to accept it - what else is there to do - and fortunately it's only my secondary system.
2. we have gotten used to 30" and do not want to downgrade.
I am a translator and need to work with technical plants and several open files, so 30" really helped facilitate work. And now that's all gone as the 27" display definitely is not up to scratch for day-long work...
I ordered a 30" display right when it became available, so it's quite old now. I worry what I'll do when it breaks down ...
Suzanne

MBP3.1 can't run 30-inch cinema display

I used my 30-inch Cinema Display on a G5 for quite awhile, but had to switch to my MacBook Pro when key apps like FC Pro required an Intel Mac. Since running it on my MBP 2.2 (Model A1226, introduced in 2007)/4 GB Ram/upgraded to 500GB drive I've had on-going problems with screen flickering, freezes and automatic rebooting.
I've had Apple replace the graphic display and the mother board twice, and the problem continues. Apple claims that the MBP can drive the display, but it doesn't look as if they're right. My laptop has none of the problems when disconnected from the display.
Has anyone else had this problem?

You don't say what connection adaptor you are using. See this Apple support post to see if it applies to you. http://support.apple.com/kb/HT3571

27 inch cinema display windows 7 problems....

my 27 inch cinema display will only display a resolution of 1920x1200 on my bootcamp partion (3.2) of my 2009 macbook pro with a 9600M GT graphics card?
it displays the full resolution on the lion partition..
i have installed the trackpad and the display update but still no luck?

Did you install the latest driver from Nvidia though? sounds like you need to.

Older 20-inch Cinema Display powering on and off repeatedly

I recently inherited an older (clear) 20-inch Cinema Display that I'm trying to use with my G5 dual 2.3 running 10.4.8. After purchasing the expensive DVI to ADC adapter and hooking it up, everything worked fine for about maybe 20 minutes or so until the display started to cycle on and off every two or three seconds (off for a couple seconds, then on for a couple seconds, repeat endlessly). This is accompanied by the power button glowing on and then off so it seems as if the power is cycling on and off by itself.
Any ideas? At first I suspected the ADC/DVI adapter which got really hot when in use, but letting it cool down had no effect on the monitor's behavior. My clunky old 19" CRT display works with no problems, so it's not the video card. The Cinema Display is my old monitor from work, and never had any performance issues, although it's been in storage for almost a year.
PowerMac G5 Dual 2.3 GHz Mac OS X (10.4.8)

Same thing is happening to me. I have the 20" Cinema Display (clear with ADC).
Last night I was in another room and all of a sudden I heard my G4 (Digital Audio) restart. I thought I was hearing things. Then about 3 minutes later I heard it again. I thought my daughter was up working on the computer or something. So I went up and there was no one around, but the computer kept restarting every 1 or two minutes. It was very strange – sometimes it it would go to sleep in the middle of the boot process.
I was able to stop this process eventually by disabling the display power button in the Energy Saver and Displays prefs panels. But I would like this feature to be functional since it makes my setup easier to use for my kids.

My 24 inch cinema display stopped working

My 24 inch cinema display just flickered and stopped working. The power is still there, the sound is still their. isight camera doesn't appear to be on, the screen is black. My display window in settings still reconginizes another display, but the screen is just black. I've tried all the normal trouble shootings, ie resetting the SMC, and PRAM, but no luck. I have never had any problems with it at all. Any help would be appreciated.

If restarting Mac and trying the suggestions in
LED Cinema Display (24-inch, Late 2008): Basic troubleshooting
don't help you, Contact Apple Displays Support.
Message was edited by: EZ Jim
Mac OSX 10.8.4

20 Inch Cinema Display Went Black

i just rebooted my mac mini that is connected to a 20 inch Cinema Display and the monitor never came back to life. The screen is totally black and the firewire, USB and video cables are plugged into the computer fine. When I look at the computer on Remote Desktop from my laptop i can see that the mac mini is fine. i can also see that when i hit the on/off button on the display that it prompts the shutdown/restart popup on the mac mini so it is communicating with the mac mini. i have also plugged the display into my PB and again I get the shutdown popup when i hit the display's on/off button. is there anything to do to bring it back to life or is it dead? its not even a year old.

Hey,
Same problem happening here, You described it exactly. Even the magenta box. Mine also happens most in the open windows, not when the desktop. I am trying to figure out when exactly it is happening. The third item I have issues with is that blocks of data are 'stuck' in a genie expansion like motion so it is blurred and dot displaying in that 3x3 inch square section. Could have something to do with refreshing? Sometimes I notice the window will fix if I manually resize the window.
Hope this helps any one who is trying to help us out.
J

Black band on my 30 inch cinema display. Any known causes?

Hey everyone,
My 30 inch cinema display is doing some wierd things which I havent encountered before.
If you can see the image, towards the LEFT SIDE CENTRE, there are these BLACK BANDS.
these start to appear after about 5-15 mins after the display is turned on. although they dont show up on bright backgrounds.
If I let to monitor cool down for 10 mins and start it up again they are gone and they start appearing again in about a min or two,
Has anyone seen any such issues before or is this a known issue with the 30 inch.
Any ideas on what I should do about this.
I will be taking it to Apple for sure as its still under warranty but would like to know
what is causing this and whats apples take on it.
Cheers,
Ani

I bought a 30inch as well a couple of months ago but have very little use except for watching movies. But when I use grey colour as the background the banding mark became very noticeable. It seems to be some kind of design issue i suppose and I dont know how Apple is going to address this. It's not a cheap monitor after all and i am very disappointed with this.

30 Inch Cinema Display with Vertical Streaks

Similar Messages

Maybe you are looking for