30 inch cinema disply

I have streaking arcoss the display as well as color variations.
Of course you they cannot be seen in the brightness of the apple store.
This is the same when attached to a laptop, G% Mac Pro and Quad Core Mac Pro.
The variations are visible with flash illumination, this makes me think there is a structural issue with the
screen.
I am lucky this is still under apple care.
Although I am not looking forward to my forth time into the apple store.

Sounds like a bug. However, I would recommend that you don't import all 8,000 images into a single project. Assuming each of your folders represents a shoot I would make a project for each one.
This is because you can import/export projects and you might want to export one for DVD backup. An 8,000 image project probably won't fit on a DVD if you're shooting with raw files. Also, this should make it cleaner to import projects captured on another computer (like a laptop).
I initially imported all my images into a single project, but eventually moved images into many small projects. You can always rearrange things from within the UI after the fact.

Similar Messages

Is it possible to attach Samsung Monitor to the 27 inch Cinema Display?

Hello,
I have an Apple 27 inch Cinema Display and I also have a Samsung 27 inch monitor.
I would like to know if it's possible to create a dual monitor setup by connecting the Samsung monitor (dvi or hdmi) with an adapter to the Cinema Display's mini display port on the back?
Does anyone know if this is possible? Or does it only work with another Cinema Display?
I'd appreciate any help received.
Thanks,

Is it possible to connect the PC to the Samsung monitor via Dual link DVI and to the Apple Cinema Display via mini display port and work as a dual monitor setup?
That should work if the PC has both DisplayPort and dual-link DVI (or two DisplayPorts).
I'm thinking the best solution for MacBook Air is to purchase a Thundebolt display and hook that up to the Cinema Display and I think then I would have a dual screen setup at full resolution.
That will work if you connect a Thunderbolt disk drive (with two Thunderbolt ports) between the Thunderbolt display and the Mini DisplayPort display.
But currently I don't think there is a way to connect a PC to a Thunderbolt Display.
Not unless the PC has Thunderbolt.

Random screen blackout 2009 24 inch Cinema Display... HELP.

Random screen blackouts with 24 inch Cinema Display (purchased 2009). Never used with anything but same Macbook Pro (2009). No hardware changes on MBP. Just started June 6, 2012. Super annoying. Anyone else having this issue? Recommendations?

Hello, Ertjie.
The link titled Download the 24-inch LED Cinema Display Update from the kb/TS4045 article worked for me when I tried it today. Click the "Download" link I post here or try the one in the kb article again. Perhaps it will work for you now?
However, I note that the kb article expressly states that this firmware update:
...is only intended for use with and will only install on the Apple 24-inch LED Cinema Display while the display is connected to a Thunderbolt-enabled Mac. (EZ Jim emphasis added)
If your Mac is really using Mac OS X (10.6.8) as shown in your initial topic posting, your Mac may not be Thunderbolt-enabled. If so, contact Apple or your Apple-Authorized Service Provider for help.
Message was edited by: EZ Jim
Mac OSX 10.8.3

Proper video card for 23 inch Cinema Display?

Hey everyone...
I recently bought a 23-inch cinema for my G4. Upon the advice of Apple, I purchased a ATI Radeon 9200(128mb) vid card to power it. Since installing the card, I seem to be having memory issues with my system, such as: memory lag with files in Photoshop and burning errors with my cd burner(i.e. buffer underrun errors), both of which I didn't have before. I guess what I'm wondering is, was this video card appropriate for this moniter? And also, what could be causing this ram conflict. Any suggestions are greatly appreciated. Thanks for your time!
-ian-

To use the FireWire ports on the display you will have to plug the display's FireWire cable into the FireWire 400 port on the MacBook Pro. If your MacBook Pro has a FW 800 port, you could use that for your disk drive with a FW 800 to FW 400 cable, or a FW 800 to FW 400 adapter. You should be able to use the display's FireWire ports for disk drives or cameras, but some brands of cameras don't work well with other devices on the FireWire bus.

My 30-inch cinema display often doesn't come on at startup and I have to disconnect it and reconnect to work.

I have a 30-inch cinema display connected to a Mac Mini. When I first boot up the computer after having it shut down for a couple of days, the display screen does not illuminate about half the time. If I disconnect the display from the power brick and then reconnect it usually comes on, although sometimes I have to do that more than once. It works fine once it on and displaying. Anyone else seeing this?
Rocketman

Hi Rocky Rakoon,
Thank you for your post, and welcome to the Apple Support Communities.
I understand that your Apple Cinema Display is not turning on upon startup. I'd like to reset the following, as it may resolve your issue:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
You may also want to reset your computer's PRAM:
OS X Mountain Lion: Reset your computer’s PRAM
http://support.apple.com/kb/PH11243
Note: Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.
For more troubleshooting directly related to the Cinema Display, see this resource:
Apple Cinema Display: Troubleshooting steps
http://support.apple.com/kb/HT2810
Thanks,
Matt M.

Can i use Apple 2005 20-inche cinema display on Mac pro ?

can i use Apple 2005 20-inche cinema display on Mac pro ?

If the display has a DVI connector it will plug into the Mac Pro directly. If it uses ADC (Apple Display Connector)
<http://upload.wikimedia.org/wikipedia/commons/0/09/AppleDisplayConnector.jpg>
you will need a DVI to ADC adapter
<http://www.amazon.com/Apple-M8661LL-Display-Adapter-4038234011420/dp/B00011KHT2>

I have a old 20" Apple Cinema Disply that is conected to a power block. Other conections that went into my G5 were a DVI, FireWire

I have a old 20" Apple Cinema Disply that is conected to a power block. Other conections that went into my G5 were a DVI, FireWire & USB. I am going to buy a new Mac Min so what do I need to get to get the screen to work with it?

If your monitor had DVI input (older 20" had ADC) then all yo need is:
- Use the supplied HDMi to DVI adopter and connect the display video
- Plug the USB for the display to the Minis USB port.
- If the display has FireWire 400 you will need to purchase a FW 400 (female) to FW 800 (male) atopter to connect the display's FW to the Mini

32 inch Cinema Display turns off repeatedly?

32 inch Cinema Display has taken to turning itself off afer 30 minutes operation.
Can this fault be repaired or should I be looking at buying a new display?

I have a 20" Cinema Display connected to an early 2008 MacPro. After years of service the monitor suddenly started going black, quite randomly. It would even happen part way through playing an edit from FCP. Strangely audio would be maintained though picture was lost. If I switched monitor power off and on again I would usually restore video image. Sometimes I had to do this power cycling repeatedly.
Looking through other posts it seemed a failure of the internal power unit was the most likely cause of the problem. But replacement seemed risky and not guaranteed. I considered buying a new monitor (probably a Dell UltraSharp since the Apple monitors are now so expensive).
Then I tried something else. In System Preferences and then Energy Saver I set the Computer Sleep slider to 25 minutes (I had always previously kept it on 15 minutes). Bingo! Problem solved.
Maybe this won't work for everyone but it certainly saved me some cash outlay. For now.

Two 23-inch Cinema HD or one 30-inch Cinema HD?

hi there
say if you got the money, will you buy two 23-inch Cinema HD or one 30-inch Cinema HD?

It depends on what you are doing. I am going to get 2 smaller monitors instead of 1 big one because I will use them in different combinations with my laptop and desktop. Sometimes I'll want the desktop to drive both. Sometimes I'll want to extend the laptop. And in the future I want the option to put Windows on one monitor and Mac on the other, from the same Mac Pro with Parallels. The Mac Pro drives 2 monitors out of the box so there's no additional expense over the monitor itself (other than taking another available outlet on the power strip). Also, two 23" monitors give you half a million more pixels than one 30" monitor, if you really need the space.
But if you have one machine and you are a single-task type of person, the 30" might be better.

What happened to the 30 inch Cinema display?

What happened to the 30 inch Cinema display?
I went into the Apple store to purchase one, all they had was the (too small) 27 inch with the ugly black border.
I did find a few used 30 inch Cinema displays on ebay, they are over $1100 USED.
Any suggestions, for a 30 inch display?

No suggestions, apart from changing to a non-Apple display such as a LaCie one.
I think Apple really makes a mistake with the new displays - they are nifty, granted, if you want to watch TV or the like, but they'll loose the professionals, working all day long with their displays.
1. the new displays have an excellent resolution, no trouble there, but they are like mirrors, reflecting lamps, etc. and very tiring for the eyes. That's already a problem with my MacBook Pro but I've got to accept it - what else is there to do - and fortunately it's only my secondary system.
2. we have gotten used to 30" and do not want to downgrade.
I am a translator and need to work with technical plants and several open files, so 30" really helped facilitate work. And now that's all gone as the 27" display definitely is not up to scratch for day-long work...
I ordered a 30" display right when it became available, so it's quite old now. I worry what I'll do when it breaks down ...
Suzanne

MacBook Pro W/30-inch Cinema Display

Is there a working solution for this yet? is it possible to use the 30 inch or even a 23 inch?
If so how?

Let me better word the question.
Can Windows XP Support the 30 inch cinema display at full resolution like in can in leopard via boot camp? Or a 23 Inch?
Thanks

MBP3.1 can't run 30-inch cinema display

I used my 30-inch Cinema Display on a G5 for quite awhile, but had to switch to my MacBook Pro when key apps like FC Pro required an Intel Mac. Since running it on my MBP 2.2 (Model A1226, introduced in 2007)/4 GB Ram/upgraded to 500GB drive I've had on-going problems with screen flickering, freezes and automatic rebooting.
I've had Apple replace the graphic display and the mother board twice, and the problem continues. Apple claims that the MBP can drive the display, but it doesn't look as if they're right. My laptop has none of the problems when disconnected from the display.
Has anyone else had this problem?

You don't say what connection adaptor you are using. See this Apple support post to see if it applies to you. http://support.apple.com/kb/HT3571

Optimum extension cabling for 20-inch Cinema

I need to add up to 2 meters distance between my MacPro and my 20 inch cinema display.
Is there an extension cable on the market that combines the video/firewire/USB cables and thereby accomodate the original cable, or
Do I have to extend these cables separately?
I ran across a 3 meter extension for the video cable? Can I just connect this up and expect it to work or will some kind of booster or other active component be required?
Can firewire & USB be extended 2-3 meters without ill effects?
My ideal is a 2 meter extender cable that mates perfectly with the 3 functions in the original cable, and you just connect it up and go ... is this possible?

Thanks. Your reference puts me on the right trail.
The cited reference seems to imply there's a non-active version of the apple combo cable that would work for the 20 inch cinema ... but I'll be damned if I can find it. Hopefully I can get some direct feedback from Geffen about it.
Careful measurements show that I really only need to extend my original combo cable 3 feet. Are you proposing that I just use one of their 'copper' DVI extension cables, a gender adapter and separately buy extensions for the USB and Firewire.

27 inch cinema display windows 7 problems....

my 27 inch cinema display will only display a resolution of 1920x1200 on my bootcamp partion (3.2) of my 2009 macbook pro with a 9600M GT graphics card?
it displays the full resolution on the lion partition..
i have installed the trackpad and the display update but still no luck?

Did you install the latest driver from Nvidia though? sounds like you need to.

Older 20-inch Cinema Display powering on and off repeatedly

I recently inherited an older (clear) 20-inch Cinema Display that I'm trying to use with my G5 dual 2.3 running 10.4.8. After purchasing the expensive DVI to ADC adapter and hooking it up, everything worked fine for about maybe 20 minutes or so until the display started to cycle on and off every two or three seconds (off for a couple seconds, then on for a couple seconds, repeat endlessly). This is accompanied by the power button glowing on and then off so it seems as if the power is cycling on and off by itself.
Any ideas? At first I suspected the ADC/DVI adapter which got really hot when in use, but letting it cool down had no effect on the monitor's behavior. My clunky old 19" CRT display works with no problems, so it's not the video card. The Cinema Display is my old monitor from work, and never had any performance issues, although it's been in storage for almost a year.
PowerMac G5 Dual 2.3 GHz Mac OS X (10.4.8)

Same thing is happening to me. I have the 20" Cinema Display (clear with ADC).
Last night I was in another room and all of a sudden I heard my G4 (Digital Audio) restart. I thought I was hearing things. Then about 3 minutes later I heard it again. I thought my daughter was up working on the computer or something. So I went up and there was no one around, but the computer kept restarting every 1 or two minutes. It was very strange – sometimes it it would go to sleep in the middle of the boot process.
I was able to stop this process eventually by disabling the display power button in the Energy Saver and Displays prefs panels. But I would like this feature to be functional since it makes my setup easier to use for my kids.

30 inch cinema disply

Similar Messages

Maybe you are looking for