30 inch HELP only 90% view (movable) in any resolution
30inch ACD working fine for 1 year, today while working, the view changed to about 90% of the full background screen. When I move the mouse or pen (wacom) it moves entire background screen so it is all accessable, but a pain to use that way as any movement of the mouse moves the entire screen.
-Tried changing resolutions, It still happens no matter which one I choose.
-Removed Wacom tablet and Software, still happens with basic mouse.
-Did shut downs, and restarts, no change. BUT screen comes up OK till the end of the boot, then, just before the desktop icons show up, the screen expands about 10 %
Thanks for the help/info, Command-option 8 did it.
No scroll wheel (old mouse/only use pen/tablet)
I must have hit the 8 while working with the buttons on the tablet. Surprised the multiple restart/shutdown did not clear it.
Similar Messages
-
Restricting the user to access only one view in or database
A user wants to create a database link , so that he can view one of our views. We want to restrict permission, so that he can access only that view, and not any of our tables. What is the best way to proceed?
Thanks in advance,
GayatriPl do not post duplicate threads - Restricting the user to access only one view in or database
-
I'm unable to access content on my iPod Classic while it is connected to iTunes.
The iPod itself shows up and is set to manual management, but I am unable to view or play any of the content on it (music, movies, podcasts etc.).
I can click the tabs Music, Movies etc. but I can't see anywhere to access the files themselves, no music or movies are listed, I only have the option to 'Sync' with the iTunes, which I don't want to do as there is no content on the iTunes!!!
I just downloaded the iTunes program.
Very confused, pleaseee help ...Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc. -
Help only have 14 gb left of 500 gb on MacBook Pro. Can I upgrade to 1Tb?
Help only have 14 gb left of 500 gb on MacBook Pro. Can I upgrade to 1Tb? (I purchased it August 2010) If not any suggestions to increase storage. Majority of my 500 gb is Desktop (assuming that is mainly snow leopard?) pictures and music. Don't really want to delete any of that.
extremely easy, see ifixit.com on a 10 scale its a 2
And mende is right, dont consider data archives of important info via wifi, and its slow. That you "can" doesnt mean you "should"
#1 You can just CLONE the original internal drive, you dont have to "install" anything.
grab carbon copy cloner or superDuper CLONE app.
2 attach target clone drive via USB in an enclosure or HD dock. Firstly format the target (external new) HD or SSD in disk utility in “Mac OS extended journaled”
3 clone internal HD to target HD or SSD (external) [takes about 40 mins depending on size]
4. Boot ONCE from external (go to sys. preference to boot from external) to TEST the new Clone
5 open bottom (see videos on ifixit or youtube on same) and remove old, install new.
(this video is for a 2012, look at this site for YOUR specific year / model)
http://www.ifixit.com/Guide/Replacing+MacBook+Pro+13-Inch+Unibody+Mid+2012+Hard+ Drive/10378/1
Done (FIRST TIME after installing, boot will be SLOW,...normal and ignore that).
Clone APPS
Superduper does not clone the recovery partition, but that is NOT necessary if you keep the original HD as a “backup clone”. Most don’t bother with the recovery partition in a clone, however that is your prerogative.
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
(Free superduper APP above)
CCC App
http://www.bombich.com/ -
Hi Gurus,
I need to provide a f4 help in a column of the tableview. kindly let me know which way is beneficial:
1. with Jscript
2. with MVC and iterator.
Need advise...HI Anubhav,
Thanks for the quick reply... i tried it and it is working only problem is no matter which cell i clicked for F4 help, return value is going in the first cell of the table view...
any idea what may be wrong...
Regards
abhinav -
Hi,
I am aware that there is a 1:1 relationship with Interface view and a window.
1) But I am not sure for the purpose of the inbound plug "Default". What is the significance.
2) What does the plug type - startup / Resume/ Standard refer to ?
I am also aware that if a window has 'n' number of views and the user want to see a particular view on the startup, we have to enable the default option as 'True' in the view properties. There is only one view which can be made to have dafault as 'True'
Any suggestions to help me get clear would be welcome.
Regards
GandolfHi Gandolf,
Please refer the following links which will help you in getting a fair idea about the navigational links and plugs.
Resume and Suspend Plugs:
http://help.sap.com/saphelp_nw04s/helpdata/en/68/3aee42c4257176e10000000a1550b0/frameset.htm
Inbound and Outbound Plugs:
http://help.sap.com/saphelp_nw04s/helpdata/en/47/455c6980f81962e10000000a114a6b/frameset.htm
Hope it helps.
Cheers,
Manoj -
Looking for read-only remote viewer app
Does anyone know of a remote viewer app which allows you to see a computer screen (XP, Windows 7) on the iPad but does not allow interaction with the PC, i.e. a read-only remote viewer?
The brand name alone doesn't help at all. Specific model numbers are required. Not all models of devices even support third-party remotes. As the iPad doesn't have IR, remotes need to work over WiFi on a local network, so if your device doesn't have WiFi, it isn't going to be controllable by an iPad.
-
Adding reminders to my calendar items is no longer an option after the software upgrade. I also can't get to day and week view, only month view. What's a possible solution? I'm using Andriod version 4.4.2 with kernal 3.4.0.
@MaloneTP
Thanks for keeping me updated! Do you see the screen options displayed in the following link: http://bit.ly/T2koBL for changing the calendar view options in Kies Air? Also, let me know if you're able to add a Reminder by following these steps: http://bit.ly/T2l9dY. Keep me posted. Thanks!
AnthonyTa_VZW
Follow us on Twitter @VZWSupport -
Specify maintenance status 'read only'. View /TDM/9_... could not be activa
I believe I run across a TDMS-related issue. I have been rolling out ERP SPS 9 to all ERP systems. I am now down to the final system, our training system. While importing the support packs, I get the following errors:
Field ARCH_XHOME-ROWID does not exist
Key field ARCH_XHOME-FILENAME missing. Specify maintenance status 'read only'.
Field BWFS_SETTINGS_0D-ROWID does not exist
Key field BWFS_SETTINGS_0D-INFOSOURCE missing. Specify maintenance status 'read only'.
Field HRP1008-ROWID does not exist
Key field HRP1008-BEGDA missing. Specify maintenance status 'read only'.
Key field HRP1008-ENDDA missing. Specify maintenance status 'read only'.
Key field HRP1008-ISTAT missing. Specify maintenance status 'read only'.
Key field HRP1008-OBJID missing. Specify maintenance status 'read only'.
Key field HRP1008-OTYPE missing. Specify maintenance status 'read only'.
Key field HRP1008-PLVAR missing. Specify maintenance status 'read only'.
Key field HRP1008-SEQNR missing. Specify maintenance status 'read only'.
Key field HRP1008-SUBTY missing. Specify maintenance status 'read only'.
Key field HRP1008-VARYF missing. Specify maintenance status 'read only'.
View /TDM/9_200C00643 could not be activated
View /TDM/9_200C00644 could not be activated
View /TDM/9_200C00645 could not be activated
View /TDM/9_200C00798 could not be activated
View /TDM/9_200C00965 could not be activated
View /TDM/9_200C01701 could not be activated
View /TDM/9_200C01846 could not be activated
View /TDM/9_200C01848 could not be activated
View /TDM/9_200C02737 could not be activated
View /TDM/9_200C03032 could not be activated
View /TDM/9_200C04033 could not be activated
View /TDM/9_200C04041 could not be activated
After some looking through SDN and OSS messages, I found a relevant posting (DDIC ACTIVATION ERROR) but no solution. I have submitted a message to SAP but since I'm under a time limit, I need to use all available resources to resolve.
I suspect these issues are a result of TDMS. Client 200 is the target of a TDMS copy. We have dropped this client for now just to see if that resolves the issue, but it did not as we expected. I suspect there is something in the TDMS controller that we need to do to "release" this system as a target but we're just now evaluating TDMS and are not experts. Any suggestions?Hi,
To resolve the mentioned problem please follow the instructions
given in following SAP note :
1020887 - Generated views in receiver system not deleted correctly.
Follow the instructions as mentioned in the note properly.
Thanks,
Rupam -
Hi all ,
I need some help on materialized view. I have to make a MV in dbms_dtm schema
I have 2 tables like below
sales and orduct
salescolumns: salesid,prodid,subid,charges
and product columns: subid and billid
sales.subid = product.subid.
i need a materialized view for this columns salesid,prodid,sum(charges),count(subid) and billid in dbms_dtm.
have to create another materialized view for below tables
order and ordertype
order columns: orderstaus,ordertype,address,ordertypeid
ordertype columns: ordername,subordername,ordertypeid
order.ordertypeid = ordertype.ordertypeid
need a materialized view for columns orderstaus,orderstaus,ordertype,address,ordername,subordername and granularity for this cloumns.
please some give me some guidens on this issue
Thanks in advanceYou should read chapters 8 & 9 of the Data Warehousing Guide:
http://download.oracle.com/docs/cd/B28359_01/server.111/b28313/basicmv.htm
Just saying "you need a materialized view" doesn't provide enough information on what you need or how you plan to use it. -
Help! Please! I cannot view images on any website or button as in submit, delete, previous, next...
I cannot view images on any website, or buttons only text. I can view youtube videos but none of the video thumbnails on the sidebar. I have never had this problem and have searched the forums for an answer.
Hi F. Carl
The clip is intact and it has video and audio.
I have worked on it before and all was fine until I lost the work when it got frozen!
The issue is:
I have a (MOV.) ready clip that I wanted to edit a bit, hence I have imported the clip (import media) and whenever I try to work on it, the black screen prohibits me from doing anything.
Any ideas please ... It's really strange ! -
Noticing some odd behavior: when you right click on any object in list view, the first contextual item is "Help". In icon or column view there is no "Help" and the first selectable action is "Open". Oddly, "Help" in list view does nothing. Can anyone explain this behavior. More importantly, can anyone tell me how to change it?
Limnos wrote:
What do you want it to do?
Actually, I'd prefer it not be there. I'd like the first selectable item to be "Open" regardless of what view I'm in. -
Setting SCORM 1.2 to force a mastery score in the manifest even when only slide views are used to tr
I have some courses that use only slide views to track completion, because the quizzes are set as separate elements in the LMS we are using (from Oracle PeopleSoft). The LMS people are telling me they require a masteryscore of 0 to be included in the SCORM manifest file when using slide views. However, when the manifest files are created, there is no mastery score included in the manifest.
Is there a way to force Captvate 6 to publish a mastery score in the SCORM manifest even when the completion criteria are 80% slide views?I am not sure, but you can always unzip the SCORm package and add the masteryscore by hand
In your manifest there should be an organizations section like this. Add <adlcp:masteryscore> under the <item> tag
<organization identifier="org-ident">
<title>Course Title</title>
<item identifier="some_id_1" identifierref="some_id_1-1" isvisible="true">
<title>Course Title</title>
<adlcp:masteryscore>0</adlcp:masteryscore>
</item>
</organization>
</organizations>
The above example has a single SCO with an ID of "some_id_1-1" an activity id of "some_id_1" and a masteryscore of 0. The masteryscore can be between 0 an 100 -
Digital Publishing Suite Help | Creating custom viewer apps for the iPad and iPhone
This question was posted in response to the following article: http://helpx.adobe.com/digital-publishing-suite/help/create-custom-viewer-app-ipad.html
The Approval Status section is no longer in DPS App Builder, but this reference wasn't removed. You can submit your app to the gallery using this form:
https://adobeformscentral.com/?f=ozjJFvlBionBofBtd-wjbQ# -
Hi Friend, Help for Scale view binding for current images.
i create one scale transaction effect, also i have images view.
i want to create hover effect, when the mouse is hover on that image ,
the scale transition play and the image will be display in rectangle of scale transition.
For Better understand.
Here is example created in javafx 1.3 . I want to create effect same like in that application.
Please click on following link to open the page.
http://javafx.com/samples/MyTVSchedule/index.html
Please , Tell me, How i will done it in javafx 2.0 , PleaseHi Sumit,
I have used the entity btadminh to create a model node.
this i have used for a table view.
initially, this i'm not using as cross component but with in the component.
i can put this way:
i have created a custom component with only one view(table view).
this view has only one context node(model node).
this model node shows the basic structure of the output i need.
i have to populate this table view with values(which i'm fetching from backend tables).
i can do this by value node but, at the next step i have to call a standard component from the order number.
so, the concept of model node.
basic doubt is, am i missing some steps while using bol entities/model nodes in my view?
in the same process, i have one more issue:
the getter methods, get_<fieldname> is not being triggered. i checked while debugging also.
had i missed some coding, still the getter methods should be triggered(since the view and node creation is through wizard).
need some pointers on this. pls revert back for any clarification on the above issues, if confusing.
Maybe you are looking for
-
Hello to all, I have one question. We are doing implementation with SAP R/3 version ECC 6.0. First let me explain the scenario. The scenario is Intercompany sale. We have two Statergic Business Units e.g. 'A' & 'B' . One SBU ('A') isues PO for manufa
-
MarshalException is transferring image as byte[]
Hi I am creating a web service which reads an image from an external url (the image is in png format). Then I am converting the image into a bufferedimage and then sending out the image through the web service using bytearrayoutputstream.tobyteArray(
-
After uploading to FTP, my site does not view properly
after i have uploaded to FTP i checked my website www.johnandsarahswedding.com and it doesn't view properly. only text and no images etc and no alignment, like the styles weren't exported etc.
-
PostCard Viewer - how to, for complete dummies!
I've found this HTML snippet at http://web.me.com/toad.hall/Demo_3/Postcard.html which would look great on a website I'm making. However, it's the first HTML snippet I've put in so far, so I'm a bit confused! I know how to put the provided snippet in
-
Did custom install of iLife from Leopard disk, want to install the rest.
When I bought my macbookpro a couple of years ago, it was supposed to have Leopard but didn't, so the Apple Store gave me a Leopard install disk. I installed Leopard (not an upgrade, an actual fresh install) but I guess I did a custom installation an