30 inch monitor ... extension cable? How to run moonitor in another room

I have a recording studio and have a quadcore and a 30 inch monitor. I'd like to run my tower in another room and put my monitor in the control room. Is there a correct extension cable that someone could refer me to?
The distance is about 30 feet or so.
thanks!

now I have the same issue with my PPC G5 running 2 19" monitors. I think they're connected via VGA. Do i need a VGA booster as well to power those monitors appx 30 ft away?
A high quality VGA should work without a booster.
<http://www.gefen.com/kvm/dcable.jsp?prod_id=5863>
Call them to be sure. Tell them what resolution and refresh rate you will be using.

Similar Messages

  • How to run java from another directory

    hi,
    i have a Sample.java file in F drive(f:/Sample.java). I opened command prompt in windows and went to c: drive and try to compile as
    C:\>javac f:/Sample.java
    above command works well. it generated Sample.class file in F:/Sample.
    But, when i try to Run that file, i got the error as follow.
    C:\>java f:/Sample
    Exception in thread "main" java.lang.NoClassDefFoundError: f:/Sample
    Caused by: java.lang.ClassNotFoundException: f:.Sample
    at java.net.URLClassLoader$1.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClassInternal(Unknown Source)
    Could not find the main class: f:/Sample. Program will exit.
    Please guide me to run java file from another directory

    Thanks a lot. I appreciate your answer
    But, when i try to run the java program.. below message has been displayed, showing how to use the command with options....
    I didn't get the result of java program.
    c:\>java f:\Sample.java
    C:\>java -cp f:\Sample
    Usage: java [-options] class [args...]
    (to execute a class)
    or java [-options] -jar jarfile [args...]
    (to execute a jar file)
    where options include:
    -client to select the "client" VM
    -server to select the "server" VM
    -hotspot is a synonym for the "client" VM [deprecated]
    The default VM is client.
    -cp <class search path of directories and zip/jar files>
    -classpath <class search path of directories and zip/jar files>
    A ; separated list of directories, JAR archives,
    and ZIP archives to search for class files.
    -D<name>=<value>
    set a system property
    -verbose[:class|gc|jni]
    enable verbose output
    -version print product version and exit
    -version:<value>
    require the specified version to run
    -showversion print product version and continue
    -jre-restrict-search | -jre-no-restrict-search
    include/exclude user private JREs in the version search
    -? -help print this help message
    -X print help on non-standard options
    -ea[:<packagename>...|:<classname>]
    -enableassertions[:<packagename>...|:<classname>]
    enable assertions
    -da[:<packagename>...|:<classname>]
    -disableassertions[:<packagename>...|:<classname>]
    disable assertions
    -esa | -enablesystemassertions
    enable system assertions
    -dsa | -disablesystemassertions
    disable system assertions
    -agentlib:<libname>[=<options>]
    load native agent library <libname>, e.g. -agentlib:hprof
    see also, -agentlib:jdwp=help and -agentlib:hprof=help
    -agentpath:<pathname>[=<options>]
    load native agent library by full pathname
    -javaagent:<jarpath>[=<options>]
    load Java programming language agent, see java.lang.instrument
    -splash:<imagepath>
    show splash screen with specified image
    C:\>

  • How to run Application on another system via WinRS

    hi Guys
    i have setup WinRM on two PCs & it works fine.
    but when i execute the following command to open an application on the remote system (in my LAN & in my subnet)
    nothing happens & cursor continue blinking at cmd windows
    C:\winRS -r:http://10.1.1.3:5985 -u:administrator -p:P@ssw0rd mspaint    ( or notepad) 
    is it possible to open an application on another system ?
    thanks in advanced

    Hi maria.holme1,
    WinRS(Windows Remote Shell) is used to execute a “program” on a remote host. Programs with a user interface, console applications that prompt for input, and console applications that use the Win32 console API, do not work correctly in the Windows PowerShell
    remote host. Considering the notepad and paint include a user interface ,they may work incorrectly in the Winrs.
    Here are links for reference:
    WinRM (Windows Remote Management) Troubleshooting(Pay attention to “What is WinRS?” part)
    http://blogs.technet.com/b/jonjor/archive/2009/01/09/winrm-windows-remote-management-troubleshooting.aspx
    about_Remote_Troubleshooting(Pay attention to” HOW TO INTERRUPT A COMMAND” in the ending part )
    http://technet.microsoft.com/en-us/library/hh847850.aspx
    “is it possible to open an application on another system ?”
    Have you tried to use PsExec?PsExec is a light-weight telnet-replacement that lets you execute processes on other systems, complete with full interactivity for console applications.
    PsExec v2.11
    http://technet.microsoft.com/en-in/sysinternals/bb897553.aspx
    Best regards

  • How to run two Automator actions simultaneously?

    I want to perform two actions at once in an automator applcation, specifically Speak Text and Run AppleScript. I can only figure out how to run one after another. Is there a way to have text spoken as a script is run?

    This is what it looks like:

  • Does anyone know How to run twin monitors on a MacBook Pro operating on a Windows Server 2008 R2 ?

    Hi
    Does anyone know How to run twin monitors on a MacBook Pro operating on a Windows Server 2008 R2 ?

    I know this doesn't help you much, but, I think you have to see if your Mac pro does audio out via HDMI. I don't even know if mine does via DVI. I think it may have to do with the adapter. Try going into Audio MIDI and setting the digital out to multichannel
    and using the toslink cable for now. Lemme see...apparently DVI does not carry audio at all. Hm. apparently monoprice could be helpful?  If I understand what you're saying correctly: you want to take DVI and multichannel audio via the Toslink and have it all go out over HDMI, right? Whooo..... amazon...looks like it's about $100http://www.amazon.com/Audio-SPDIF-Toslink-Converter-Adapter/dp/B0015YYOQQ
    just a shot in the dark
    I'm probably wrong....or not
    John B

  • HT3986 How do I run an external monitor on a macbook pro running windows 7

    How do I run an external monitor on a Macbook Pro running Windows 7

    on my imac connecting a TB to dvi converter to my imac and to my 24" dell monitor was all it took
    windows like osx saw the external monitor and let me clone to it or extend my desktop to it

  • Connecting a 23 inch monitor to comcast HD cable box

    Hi folks
    I just got a 23 inch monitor and I am interested to know if anyone has used the display to output video from a cable box. I have a female DVI to HDMI connector and the cable box has an HDMI port. Is there anything else I should worry about?
    thanks!
    12 inch powerbook   Mac OS X (10.4.8)   23 inch apple display

    I have not tried this myself with my 20" cinema display but when I tried it with a viewsonic monitor I had problems with the Digital Copy Protection system they use on the HDMI/DVI ports on the cable boxes to prevent people from copying the video. I do not know if the Apple display has HDCP support or not. If it does it should work fine, otherwise your get an error message on the screen telling you there is a DCP error. Either way if you already have the cables give it a try it won't hurt your monitot. Note that if you get a DCP error (or no display) when you connect the HDMI cable restart the cable box with the monitor attached to see if that works.

  • How to run report from context menu using XML Extensions?

    I have found an example how to run SQL command from context menu:
    <items>
    <folder type="TABLE">
    <name>UserDefined ContextMenus</name>
    <item TYPE="TABLE" reloadparent="true">
    <title>Create SYNONYM</title>
    <prompt type="check">
    <label>PUBLIC</label>
    <value>PUBLIC</value>
    </prompt>
    <prompt>
    <label>NEW SYNONYM NAME</label>
    </prompt>
    <sql>
    <![CDATA[CREATE #0# SYNONYM  #1# for "#OBJECT_OWNER#"."#OBJECT_NAME#"]]>
    </sql>
    <help>
    This action create a SYNONYM (optionally public) for the selected table.</help>
    <confirmation>
    <title>Confirmation</title>
    <prompt>SYNONYM "#1#" for "#OBJECT_NAME#" has been created.</prompt>
    </confirmation>
    </item>
    </folder>
    </items>
    </prompt>
    But instead of executing SQL command I need to show result page of report based on SELECT statement.

    Hi dz_r-
    Not sure exactly what you mean by "result page of report", but extensive documentation on the xml schema defining context menu actions is available at the schema location.
    &lt;items xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
      xsi:schemaLocation="http://xmlns.oracle.com/sqldeveloper/3_1/dialogs"
      xmlns="http://xmlns.oracle.com/sqldeveloper/3_1/dialogs">
        &lt;!-- your declarations here -->
    &lt;/items>
    Brian Jeffries
    SQL Developer Team

  • Optimum extension cabling for 20-inch Cinema

    I need to add up to 2 meters distance between my MacPro and my 20 inch cinema display.
    Is there an extension cable on the market that combines the video/firewire/USB cables and thereby accomodate the original cable, or
    Do I have to extend these cables separately?
    I ran across a 3 meter extension for the video cable? Can I just connect this up and expect it to work or will some kind of booster or other active component be required?
    Can firewire & USB be extended 2-3 meters without ill effects?
    My ideal is a 2 meter extender cable that mates perfectly with the 3 functions in the original cable, and you just connect it up and go ... is this possible?

    Thanks. Your reference puts me on the right trail.
    The cited reference seems to imply there's a non-active version of the apple combo cable that would work for the 20 inch cinema ... but I'll be damned if I can find it. Hopefully I can get some direct feedback from Geffen about it.
    Careful measurements show that I really only need to extend my original combo cable 3 feet. Are you proposing that I just use one of their 'copper' DVI extension cables, a gender adapter and separately buy extensions for the USB and Firewire.

  • How to run extension programs(sabp0000, sabp0003)

    sabp0000 and sabp0003 are the extension programs of RSARFCSE . can anyone help me out how to run these extension programs ...

    Erm, how did you compile the first one? Seriously, this is fundamental stuff. If you don't know how to compile a class yet, you need to re-visit the basics. You won't get far without them
    edit: nearly 9 files? 8, then?
    Message was edited by:
    georgemc

  • Running Oracle Forms 10g on 30 inch monitors

    Hi!
    Oracle Forms application (10g) will not work good on 30 inch monitors. (Running NATIVE, suns javaengine)
    Most of our customers is running on 24 inch monitors with no problems.
    Has anyone had the same problem? Solution?
    Regards
    Tobias

    As I mentioned, you need to install the 10.1.2.3 patch set. Additionally, you can find over 110 more Forms fixes in Patch ID 9593176. This patch requires that 10.1.2.3 be installed first.
    One last comment, IE 9 and FF 10 are not supported for use with Forms 10.1.2.x. Also, JRE 1,6,0_30 is not certified for use with Forms 10.1.2.0. Version 10.1.2.3 would be required in this case. I am not suggesting that your configuration won't work, but rather because it was not certified by Oracle there is a possibility that it will not work correctly in some instances. Because those browsers were never certified, it would be up to you to prove that the same problem reproduces in a certified configuration if you expected Oracle Support to assist. That said, Forms/Reports 10.1.2.x is no longer entitled to Error Correction Support, so I guess it really doesn't matter what configuration you use as for the most part you are on your own.
    The current Forms/Reports version is 11.1.2.0

  • How to run CustomEditor extension?

    How can I use CustomEditor extension? I selected "Deploy All Samples" and restarted JDeveloper. There is few new item in menu, HelloX extension work (how to start this extension? File\New...\General\Projects\HelloX). What next? How can I open file with this editor? Is there a list of all editors installed in JDeveloper?
    Tutorial would be very helpful for beginners.
    Regards
    Lukasz

    Im not sure if you will get 24bit from some older CD's, but you could use homeplugs and avoid the wiring issues.
    Find good high speed homeplugs Ive seen some which are 500Mb, connect the NAS drive to the router or your hifi.
    Its worth looking at the homeplugs because I currently run my whole TV media setup via homeplugs using a netgear switch (1gbps).
    Ive got my ps3,xbox, bt vision and TV setup connected to the internet via homeplugs.
    They are a great.
    I would check if its possible to get 24bit via homeplugs since they can go up to 1gbps, although im sure  the 1gbps plugs will be quite expensive. Im think 500mbps plugs will be fine for 24bit, but im not 100% sure.
    Netgear Setup

  • Running a 27 inch monitor over Dual link DVI-D

    Hi all
    I have recently acquired a 27 inch monitor to use with my Mac.
    My Mac is a 13 inch 2011 Macbook Pro.
    I am connecting using the Apple Dual Link Adapter.
    When I connect and boot-up, I get the grey background with the Apple. No problem. But when the bootup is complete, the picture has disappeared. This leads me to believe that the problem is a OSX problem. I have the latest version of OSX lion.
    When I use the same monitor and adapter on Windows / Boot camp, it works flawlessly. More reason for me to believe that it is a OSX Lion problem.
    Any solutions?
    Thanks

    I happened onto this thread while searching for a way to connect my T400 to my wife's 27" iMac. What I learned thus far is that Atlona makes a device (AT-DP400) that will convert dual link DVI to Mini DisplayPort. But Atlona says that one's graphic card must support 2560x1440. The T400 doesn't have a DVI out (nor does my current docking station), but it sounds like one can get a docking station that does. But that won't help if my card won't support 2560x1440. So are you saying that there is no way I will be able to use the 27" iMac as a monitor for the T400?
    -Rob 

  • G5, Dell 30 inch monitor, Radeon Mac9600 PRO 256MB

    When I ordered this monitor, I read that my computer should have a dual-link DVI-D compatible graphics card. I had a dual-link DVI card, but soon found that the one I had didn't support the higher resolution of the 30 inch monitor. Apparently, the only card that does work with the bus structure on my G5, (which is AGP8X), is the recently discontinued Radeon Mac9600 PRO 256MB.
    Since I couldn't find one that was actually in stock from the likes of CDW, I tracked one down on eBay. What is unfortunate is that while it does indeed support this resolution, there is a lot of crazy pink artifacting (for lack of a better description) that is going on all over the screen. There are also static-like lines that zip around occasionally. I am assuming that this has something to do with the card (I have now tried 2 different 9600 cards) as the problem was not present when driving the monitor with a lower resolution-supporting card.
    Any ideas how to remedy this other than buying a new computer that supports the newer PCI-E cards that might alleviate the problem?
    I am also wondering if I end up having to selling this monitor because the problem is unsolvable and I purchase the Dell SP2309W, 23inch, will I have the same problem because of my G5's "ancient" bus structure..?
    As a side note, I have two Apple 23 inch cinema displays, both of which have gone pink on me, so I am not inclined to purchase an Apple display again.
    In advance, I really, really appreciated the assistance. When did this all get so darned complicated?

    Hi Steve,
    Thanks so much for the response.
    I originally had a Radeon 9600 128MB card which did not support the higher resolution on the Dell 30". However, when the 30" was running from the 9600 128MB until I could get the newer card, I did not have this pink artifacting problem, so that leads me to believe that it is not the cable. However, my husband is bringing one home tonight to try anyway.
    I have tried two Radeon Mac9600 Pro 256 MB cards, thinking the first might be defective, and still have the same problem. So, unless both cards are defective, it is something else. I have searched around online trying to find an answer, but all I seem to find are folks mentioning the same problem (with a variety of cards & monitors), but nobody seems to offer an answer that actually solves it.
    I appreciate the input regarding the smaller monitor. I thought that might be the case, but at this point, I take nothing for granted. This just all seems overly complicated
    As for the other cards (nVidia 6800, and ATi's X800), I cannot seem to find one of either that is actually available for purchase - and AGP, and MAC OS X, and 256 MB, and Dual link DVI. What I have heard is that the AGP bus structure is "ancient" and that nobody is actually manufacturing these cards any longer.
    The other issue that comes to mind, is that if I find one of the above cards (I think I found one on Amazon - used for $499) I could get it, and find I still have the same issue. Refer to my comment regarding other posters who seem to have the same issue with a variety of cards/monitors. I just thought that somebody, somewhere had to have encountered this and knew how to fix it or at least what it might be.

  • Thunderbolt extension cable for apple display?

    I was so excited when I received my Promise Pagasus raid system. But there is a problem:
    I have a macbook pro, an Apple thunderbolt display and now I would like to daisy chain the Pegasus between the display and the computer. The problem is that the cable coming from the display is extremely short after the point where it splits up. Unless I put the Pegasus (a large box) right next to my laptop on the desk (no room for that) I cannot daisy chain. A thunderbolt extension cable would do the trick, but they do not exist?
    I am sure somebody else has run into this problem, please share your solution.
    Thank you!

    Danielle Smit wrote:
    I was so excited when I received my Promise Pagasus raid system. But there is a problem:
    I have a macbook pro, an Apple thunderbolt display and now I would like to daisy chain the Pegasus between the display and the computer.
    - Just to verify... your MacBook Pro "HAS" Thunderbolt, correct??
    - You already have a "Thunderbolt Display"????   How did you manage that?  I haven't seen any in any store yet or heard of anyone else getting them yet.
    Danielle Smit wrote:
    The display has 3 cables going into the mac:
    1. thunderbolt (this is where the data goes through)
    2. usb (provides the usb connection to the hub on the back of display)
    3. power (provides power to computer)
    Are you saying there is a "USB" cable/connector coming from the display??  If so, that is NOT a Thunderbolt display.
    From everything documented, the Thunderbolt display looks like this:  (the only cables built-in are the normal A/C power cable, then one main cable that has (2) plugs at the end... 1) the magnetic power adapter that connects to laptops... and 2) a Thunderbolt plug.
    Is this what your display looks like?
    *** OR ****   Does Your display ACTUALLY look like this one (which is the older 24-inch LED Cinema Display):  This one actually had a USB cable/plug as one of the "Built-In" cables.  If this IS what you actually have, it is NOT a Thunderbolt display, although it WILL still work with laptops and the hard drives that DO have Thunderbolt.

Maybe you are looking for