30" Monitor having problems after updating to 10.6.4
I have a Dell 3007WFP 30" monitor and as soon as I updated to 10.6.4 I am seeing a mirror display on the right hand side of the entire screen. It's in resolution 2048x1280 which is the only resolution I like to use. I am seeing other posts on here about the problem also using 30" Apple Cinema displays. Is there a way to let Apple know that they screwed the update up?
Perhaps the update did not apply successfully.
Download and reinstall it manually: http://support.apple.com/kb/DL1048.
Still happening after that? Try a safeboot and then restart: http://support.apple.com/kb/HT1455
Similar Messages
-
Why having problem after updating to IOS 7?
My unit is Iphone 5 and bought it 3rd week of August with serial no. F1*******TWF. Recently, I updated to IOS 7. After updating I am having problem downloading applications like Candy Crush, Chikka Messenger and etc. Whenever I download apps it's not going through. How to fix this problem? I tried turning OFF and ON the unit but still the same.... need HELP here
Message was edited by: sit24
<Edited by Host>Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/ -
G3 with OSX3 having problems after updating QuickTime
Recently updated a G3 with 10.3 and when I did the software update, it had an update for QuickTime and when the machine restarted after update, it sat on a grey screen. Tried restarting with extensions off and got nowhere. Computer worked fine until the update. Any ideas?
You may have to start the computer from the Installer disc, with that disc
in the optical drive and hold the C key down, so as to access the native
Disk Utility as found in the Installer's menu bar options. From D.U. you
may be able to attempt to Repair Disk. And also may as well run the
Repair Disk Permissions as seen there in the First Aid section of the
Disk Utility; direct your attention to the Macintosh HD as shown in the
utility's left-hand sidebar, by clicking on that name to do these.
Usually it does help to use Repair Disk Permissions (from the computer's
Disk Utility; shortcut is to use GO in Finder menu bar, see Utilities Folder,
and then find Disk Utility in that folder) before and after each update or
any/all software installations. Was the 10.3 system updated to 10.3.9 and
disk permissions repaired at each step? There are several others items
that get installed for 10.3.9 not referred to in Software Updates until the
Combo 10.3.9 file is installed. Several older items are not needed if the
last Combo is arrived at first; but all Java updates, last security updates,
and then items such as Quicktime. Adobe Flash & Shockwave players
and a modern browser such as Camino (Mozilla) are advised as well.
IF the system has failed, you may be able to see if you can reclaim any
thing (if any) from the hard disk drive by use of FireWire Target Disk mode
in that Mac, and it may be accessible through a second Mac & FW cable.
There is a chance there is a hardware issue behind this matter. In fact,
depending on the history of the specific computer and whether or not it
previously had OS X installed, what version, and if it required a Firmware
Update to be applied prior to running OS X, the fix could be involved.
Good luck & happy computing! -
Iphone 5 back camera problem after update to IOS 8. Focus doesn't work on back camera!
My device is Iphone 5 64gb IOS 8.
I have problem after update to IOS 8. When i run camera.. I hear some scratch inside my phone. And focus of back camera doesn't work.
1. How can i fix it?
2. Or how to rollback to IOS 7+ ?
3. Should i come to app store with this problem?I'm having this same problem too. Worked fine prior to iOS update. I contacted Verizon this morning who advised that this is a known issue. They suggested I backup my device, and perform a factory data reset. When prompted to update to iOS 8 again, re-installation has been known to resolve the issue. With all the problems with iOS 8, camera, and overall device slowing, I might just wait for a follow on SW turn.
-
White screen problem after updating to 1.1 firmware
My 2G iPod Nano worked fine with 1.0.1 and 1.0.2 firmware but after updating to 1.1 I get white screen everytime I turn it on after longer period of time. Turning the iPod off and then right back on makes it work again. I have done restore 3 times without effect. I even removed the firmware files so that iTunes downloads them again when doing the restore but that didn't work either.
Should I return it or wait for new firmware? Has anyone else had this problem after updating to 1.1?Disconnect iPod and close iTunes.
Firmware files are in "Documents and Settings\username\Application Data\Apple Computer\iTunes\iPod Software Updates" folder.
You should still have the 1.0.2 files named "iPod_19.1.0.2.ipsw" and "iPod_19.1.0.2.ipsw.signature" in there if have you upgraded from 1.0.1 version.
Remove 1.1 files from the folder so that only those to files are in there.
Disconnect from network (I switched off my wlan) so that iTunes can't download the new version. Connect your iPod and do Restore, iTunes will now use the old firmware files because it can't connect to the internet.
Fujitsu Siemens Amilo M3438G Windows XP -
Photoshop CS2 problems after updating to 10.4.5.?
Anybody notice Photoshop CS problems after updating to 10.4.5.?
Hello I had the same problem
I found the following information that helped me.....
Program errors occur when software conflicts arise due to an updated operating system. You can resolve these errors when you also update the driver software that causes the conflict or when you update the operating system. Program errors can also occur because of a damaged Photoshop preference file, or if there is a problem with a phone or internet connection. The Apple Disk Utility fixes file system errors that can also cause program errors.
Error "Could not complete your request..." or "Could not create a new document..." (Photoshop CS2 on Mac OS X v10.4)
Issue
Adobe Photoshop CS2 returns one of the following error messages:
"Could not complete your request because of a program error" when you try to open a file.
"Could not create a new document because of a program error" when you try to create a new file.
Solution 1:
Install the most recent update to Mac OS.
Solution 2:
Re-create your preferences files.
1. Hold CommandOptionShift when you start Photoshop.
2. Click Yes to the message, "Delete the Adobe Photoshop Settings file?"
Solution 3:
Disconnect your Internet connection.
To disconnect your Internet connection, do one of the following:
If you are connected to the Internet via a telephone modem, then disconnect from the modem.
If you are connected to the Internet via cable modem or DSL, then disconnect the ethernet cable from your computer.
Solution 4:
Use a disk repair utility.
Restart your Mac in Single User mode and run fsck -fy . For more information about the fsck command, please visit the Apple website at http:/docs.info.apple.comarticle.html?artnum=106214 .
Solution 5:
Ensure that all your drivers are compatible with Mac OS X v10.4.
Determine if your printer and video card (and any other peripherals you might have) are compatible with Mac OS X v10.4, and visit the manufacturers' websites to update the drivers.
Solution 6:
Re-create your printers in Mac OS X.
To re-create your printers, first delete them and then add them again.
To delete your printers:
1. Open System Preferences from the Apple menu.
2. Select Print & Fax, and click Printing.
3. Select each printer in the list and click the delete key (the minus key).
For instructions on how to add your printers again, see "Setting up to print to a printer" in Mac Help or search Help using the phrase "add a printer."
The one that fixed it for me was solution 6 -- re-creating my printers
I don't know why but it could be worth a try
Good luck
ADAM
17" Powerbook G3 iMac Mac OS X (10.4.3)
17" Powerbook G3 iMac Mac OS X (10.4.3)
17" Powerbook + G3 iMac Mac OS X (10.4.5) -
My itunes opens 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
but my problem doesnot get solved even after trying all the methods in the above pages...
now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possibleMy itunes opens 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
but my problem doesnot get solved even after trying all the methods in the above pages...
now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible -
What cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?
what cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?
SSince Apple does not support downgrading the iOS I suggest you start a new question that gives a good title to a specific problem. Then in the body of the thread describe the problem in detail, tell us what steps you have tried so far to correct the problem, what happened, and what error messages you received.
-
I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP
I am facing the same issue! I bought 5c few days back
and everything was fine till I updated the software 7.0.4!
Whenever am connected to wifi am unable to make a call and if someone tries
Calling me they get the message that my number is not
Reachable! When I go back to 3G the calls work perfectly!!
Please help me out since I use wifi more than my network.
Appreciate any advise on this -
Flash player problem after updating to belle on my...
flash player problem after updating to belle on my nokia c7.when I try to play .flv videos screen goes blank as show in image,previously these videos runs fine on symbian anna plz help plz help or tell me the way to downgrade to anna
Attachments:
scr000002.jpg 10 KB1) product code 059B7W0
2) software version 111.030.0609
3) it is actually stored .flv files on my phone workes fine on symbian anna
Attachments:
Scr000003.jpg 17 KB
Scr000004.jpg 15 KB -
Anyone has any problem after updating to iSO 4.3.1 ?
anyone has any problem after updating to iSO 4.3.1 ?
I would like to know before updating mine.My 3G kept freezing after iSO 4.2.. and after reading the forums I updated both my Itunes and software to iOS 4.3.1, now I've lost my notes, contacts, calender entries and so far in the last ten minutes it's turned off and restarted itself and sync'd continually about 5 times.
So basically I'm still where I was before only more cranky. In addition, I live in Australia and there are no Genius places here, there is no support from Apple unless you pay for it even by an email, you basically end up fending for yourself under a supposed warranty that isn't worth the paper its printed on.
It you haven't already guessed, I'm more than a little ****** off.
If I'd known how much trouble this was going to be, I don't think I would have spent the $400 odd dollars to buy it.
If its not right by the weekend I'm taking it back to the shop I bought it. -
Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?
Has your problem been solved by the updates??
Have a similar problem. This MacBook opened all MS Office programs in Dec2012 but no longer does in Feb2013. Went to Microsoft/mac/downloads but none of the three updates would run citing a problem "version of software needed to run this update was not found on this volume".
MacBook: 7.1, Intel Core 2 Duo, 2.4 GHz
Microsoft Office 2011: version 14.2.3
Mountain Lion: 10.8.2 (12C60) -
I am having problem with updates CS5
Hi,
I am having problems with updating my CS5. I keep getting an error message "There was an error downloading this update. Please quit and try again later"
Can you please help?
Thank you
Eli BSee if doing it manually works
All updates start here and select product, read to see if you need to install updates in number order, or if the updates are cumulative for the individual product http://www.adobe.com/downloads/updates/ -
having problem with updating to 10.6.6 , my software now is 10.5.8, when the my mac is tellin me that i have already update to the lastest software when i haven`t :/ help !
You need to find a store selling it and purchase it. If you buy it from an online store, it comes in the form of a DVD shipped to you.
Unless Apple or someone with a site license applicable to you says otherwise, you can't download it.
(60044) -
Cpufrequtils problem after update
Hello!
I've a problem after update my system with pacman -Syu.
When system loads cpufreq i've this problem:
cpufreq-set: error while loading shared libraries: libsysfs.so.1: cannot open shared object file: No such file or directory
I try uninstall the cpufrequtils package and reinstall it but doesn't works
How can i fix it?
thanks.raskolnikov wrote:
No need of cpufrequtils :
$ cat /etc/rc.local
#!/bin/sh
echo conservative > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
That's ok. And of course powernow-k7 in MODULES array of rc.conf
Sure, that's pretty much what cpufrequtils do, however, they a) don't spawn a shell process and b) allow you to configure sudo to handle user-based changes. It's just a nice wrapper for that.
raskolnikov wrote:BTW the last update of this (cpufrequtils) package has overwriten my /etc/conf.d/cpufreq file, is this a normal comportement ? This file was not in NoUpgrade as if I remeber correctly, NoUpgrade was deprecated with last pacman package...
Errm, blame me - that file should be backed up. Thankfully, it's not a giant config file.
Maybe you are looking for
-
WebGL doesn't work after update
When I updated from kernel 3.6.9 to 3.8.1 (after pacman -Syu), WebGL didn't work anymore. Now I updated to 3.9.6, but the problem persists. WebGL correctly worked both in Chromium and Firefox, but now their createContext returns null with "webgl" and
-
LCD screen, eyestrain problems?
I've been considering getting an iPad 2 or a Kindle DX to have my college textbooks on and to use an ereader. It would be nice to have the extra features of the iPad and it would be easier to take to class than my laptop, however, I was wondering abo
-
Hi: I need to set up an interactive online form connected to my SQL Server database. The form is an application where there is one person who is related to x number of different labor categories, for example. I have the tables set up in SQL Server. 1
-
Hi all, How to add a attachment in Adobe forms. i.e how do we attach the document link to the adobe forms. Thank you! Prasad
-
Please help. I set a password on my restrictions and now I've forgotten it. How can I reset it.