30 pin lightning converter suddenly not working properly in my car

I have a Hyundai Veracruz that has the Hyundai cord that you plug into your phone and can play music/podcasts through the speakers while charging the phone. Of course, when I traded in my iphone 4s for the 5s a few weeks back, I had the problem that the Hyundai cord was compatible with the 30 pin plug. I ended up getting the lighning to 30 pin adapter (not the one with the cord, the regular little one. I tried the corded lighting to 30 pin adapter first because of the issue with the regular lightning to 30 pin adapter not working if an iphone is in its case, but that product didn't work at all). Anyway, it had been working totally fine-- recognizing the iphone as soon as I plugged it in, playing my music through the speakers, charging it, allowing me to use the controls on my steering wheel to skip songs if I wanted-- until this morning. When I plugged it in this morning, my radio didn't turn on automatically like it always has before. Instead, when I turned it on manually and went to the auxilary mode it just says connected instead of ipod detected or whatever it used to say. The good news is that it still plays through the speakers and charges, but I can't use the controls on the steering wheel and clearly something is wrong. Any ideas?

Hello there, jenniferps.
The following Knowledge Base article reviews some great information about troubleshooting car stereo connections:
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/TS3581
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Similar Messages

Several applications suddenly not working properly at once

Hi,
I've run into some quite big problems with my 2009 13" MBP (8gb ram, 2.26 GHz).
Today I noticed Safari wouldn't connect to websites that used the HTTPS protocol; I would just get a screen saying "Safari can't create a secure connection...." or something like that. Normal websites work fine. Then I noticed the iTunes store didn't work (probably because of the same problem that's causing secure websites not to work)
But then it gets weird: iTunes also gives me several error messages about it not being able to save the library file (error code -50 if I remember correctly). And while this is all happening Disk Utility won't open either, it just bounces on the dock.
These are the problems I've run into at the moment, but I have a feeling more applications won't work either.
The weird thing is all of the problems start acting up at the exact same time, without any particular trigger that I've noticed.
When I restart my Mac everything goes back to normal: I can visit secure websites, I can open Disk Utility and fix permissions etc etc. But after half an hour or so the same problems come back.
I've tried to repair Disk Permissions, reset Safari and restarted the MBP several times, but nothing works. I haven't done anything out of the ordinary with the MBP except for installing a Java update a few days ago. I thought that might be the cause and deleted Java completely, but still no luck; the same problems still persist.
I couldn't find any similar problems on Google, and I really need help. Safari not visiting secure websites is a real pain, since Facebook, Google etc etc all use https.
-Thomas

I could finally get Siri to recognize my apps and launch them again with the following couple of troubleshooting activities.
Step 1. go to Settings -> general -> siri -> disable Siri. Then shut phone down and after restart re enable Siri.
Step 2. go to Settings general -> reset -> reset network settings.
Step 1 didn't work for me but it still a good troubleshooting activity and may solve other Siri related problems.
as far as step 2 goes, as soon as i reset the network settings on my phone, SIRI started working properly again. I am glad it worked and didn't have to restore my phone or do some more complex tasks.
Hope this helps some one else.

Motion 3 suddenly not working properly

I have Motion 3 on a Mac Pro, and everything has been running JUST FINE until today.
When I booted up Motion today, I noticed problems:
1. The Utility window won't open
2. I cannot add any Behaviors. When I hit the Behavior button, absolutely nothing happens
3. I cannot add any Filters. When I hit the Filter button, absolutely nothing happens
4. When I try to open the app to a new project, no new project is automatically created
Other parts of the app seem to work fine. When I hit the button to add a new camera or bring up the HUD or something similar, it does that just fine. Its just those 4 things it won't do.
One thing I did try doing was drag the Motion app to the trash and used Time Machine to retrieve the app from a few days ago (when it was working properly), but that doesn't help at all.

http://www.applemotion.net/page15/page15.html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."
<post edited by host>

Nano will not work properly in my car

I have a 4th generation Nano. I just got a new car, and the car has a USB port to plug my Ipod directly into the car, and you can control the Ipod from the car's stereo.
The problem is, into every single song I play, after a few seconds, or a minute into the song, the song will stop playing, and the Ipod will switch to the next song. It always does this. I cannot find anything about it online for my car, or the car's owner's manual.
Any ideas? Or has anyone else had this problem? Thanks.

Are you burning audio CDs or MP3 CDs? If you're burning MP3 CDs, confirm that your car player can handle them; many cannot. If you are burning audio CDs, try a different brand of blank CD and see if that works better in your car.
Regards.

Print Booklet suddenly not working properly

I am working with InDesign CS3 in OS X 10.5. Up until this week, the Print Booklet function always worked fine for me (I only use it for generating PDFs with printer spreads). Now, however, files that printed properly in the past are generating PDFs of the wrong page size and orientation, and sometimes with the wrong scaling as well. The previews in Print Booklet still look fine, but the PDFs generated are not.
One thing that stands out in particular is that, in the past, I could take care of all the settings in the Print Settings dialogue box - printer, page size, orientation, etc. Now, if I want the right page size, I have to go into the Page Setup box and choose the page size from there. If I am dealing with an uncommon page size (which can easily be set in the Print Settings box), the Page Setup box does not have that option (or it requires establishing a new custom page size). Furthermore, even when I can get the right page size, the page orientation in the resulting PDF is wrong and the pages need to be rotated, where they didn't before.
It seems like the problem may have something to do with InDesign's communication with the Adobe PDF printer. This same week, I found that the software for my normal paper printer could not communicate with the printer, and I had to reinstall the printer driver, which took care of the problem. Maybe there is something similar I need to do here, with regards to the Adobe PDF printer driver? Or, perhaps there is a system file that might be missing or needs to be deleted and replaced? Please help - thanks!

You updated to 10.5.5 didn't you? This is a problem with a CUPS file which has been discussed on the forums. Basically replacing the 10.5.5 version with one from 10.5.4 will fix the problem. See also this
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb406381&sliceId=2

Sharing suddenly not working properly

Hi,
I have been sharing itunes on my imac with both an iphone 4 & ipad 2 for ages, all going smoothly.
Suddenly, about a month ago, both devices started to show only a handful of the artists and albums
whilst the actual songs individually are all shared. So on the song tab, all 4179 songs are listed, but
only 4 artists in the artist tab, and 75 albums in the album tab.
Have tried closing/re-starting, home sharing on/off etc. but nothing works.
The only non standard thing in my set up is that I have all the itunes media stored on an external drive.
Dont think this can be the issue though, as its been set up that way for about a year with no issues.
Would appreciate any ideas out there as to what is going on, and even how to fix.
Thanks.
My Specs:
Quite old white plastic imac
2.16 GHz Core 2
1 GB 667 MHz DDR2 SDRAM
250 GB - 75 used
iTunes 10.7 (21)
iphone 4
ipad 2
External Drive - Samsung Story - 1 TB - 380 GB used
Format: Mac OS Extended (Journaled)

FYI - I spoke to Apple support earlier and this is still not an acknowledged issue. Ergo, no one is looking into it.
They have 'offered' to call me back when at home to go over my setup that was working fine in IOS5 but not IOS6 as the setup MUST be the issue. Not sure if I made things worse by pointing out that I'm and IT consultant and have worked with Apple systems for more years than I'd care to admit to.....
The support tech I spoke said that her home sharing works fine. Hmmmmm.
I'd suggest that EVERYONE puts in for a support callback (you can go through the iPad option and chose the 'I should get an exception for updating to ios6' option) and get them working.

Why are videos taken with a 4S suddenly not working properly when sent to non iphone users since the update?

Suddenly non I-Phone users cannot view videos anymore, they can hear the sound, but no audio. Iphone users are having issues viewing the videos too. This all started with the 6.0 update. Please fix it or tell me how to restore my phone back to the previous update, it is quite annoying.

Hello VintageShaay,
It sounds like you are getting some audio issues with the included Ear Buds when they are plugged in. I wanted to recommend these troublehsooting steps from the article named:
Troubleshooting iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/ts2634
3. Disconnect and Restart
Disconnect the accessory and turn it off, if possible. Restart iPhone, iPod touch, or iPad by turning it off and then back on. When the Home screen reappears, reconnect the accessory.
4. Isolate
Isolate the issue to the accessory, if possible. Or, if available, try to reproduce the issue with another identical or similar accessory.
Examples:
If there is static coming from the left audio channel when using headphones, try connecting the headphones to a stereo, or try connecting a different set of headphones to the device.
If the device is not syncing when connected to the dock, try connecting it directly to the computer using the Dock Connector to USB Cable, or try another USB port.
6. Restore iPhone, iPad, or iPod touch
Restore iPhone, iPad, or iPod touch to its factory default state. You should rarely need to use this step with an accessory issue. If the issue only affects a third-party accessory, contact the manufacturer before restoring the device.
Also if that does not resolve the issue, try the steps from the following article:
Apple EarPods: Low or muffled sound
http://support.apple.com/kb/TS4395
Thank you for using Apple Support Communities.
All the very best,
Sterling

HT4108 Apple digital av converter suddenly not working...

Used my Apple digital av converter the other day with no issue...now the status bar glows blue when it is connected but get no signal to the TV. Ipad2 with iOS 6.1.3 and adapter is AV 1388. Nothing has changed, why won't it work?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Inspect the dock connector on the iPad and adopter for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

IPad display suddenly not working properly.

iPad 1 is about 6 months old. All of a sudden, display is displaying colors incorrectly.
Everything is inverted or monochrome or something.
I have restarted and restored, to no avail. I have also verified the most current iPad and iTunes Software.
Any ideas short of shipping to Apple?
Wes

Wes,
Check Settings>General>Accessibility>White on Black>Off.

Help home button suddenly not working properly after io5 update!!

having finally got ios 5 after multiple attempts now a few days in the home button has decided to have a mid of its own? in app...take 5-10 presses to exit app??
home screen double tap to show appswitcher sometimes just doesnt happen was all fine till this ios upgrade..its really annoying me now as simply exiting an app takes forever now!!!

nothing??
restored 3 times and still same

Hyperlinks not working properly in PDF, converted by Nuance PDF converter

I have encountered a problem with the pdf files which were converted by the Nuance PDF converter(v8.1).
When reviewing a pdf file in Adobe Reader X(v10.1.0) the hyperlinks are not working properly in the "fit to window width and enable scrolling" mode.
The second one, "fit one full page to window", is working without problems. In this mode all links can be used.
Attached is a screenshot about the two modes in Adobe Reader X.
This issue is just happening, if the file is converted by Nuance PDF converter.
Well, Nuance support was not helpful at all.
Regards

just the "alias hyperlinks"(don't know the specific name) are not working.
if I write down www.hp.com it's just fine.
i've uploaded documents..
one is created with nuance pdf converter and the other with MS Office Word "save as pdf" function.
http://www.filedropper.com/linktestdocumentnuanceconverted
http://www.filedropper.com/linktestdocumentofficesafeas
so it seems like that nuance is not supporting "alias hyperlinks"..

Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

HT3964 Hello, my isight camer is not working properly, i was using photo booth and suddenly the image was black or too dark and also ichat and facetime are too dark as well, please helpme out i can not find any solution.

Hello, my isight camer is not working properly, i was using photo booth and suddenly the image was black or too dark and also ichat and facetime are too dark as well, please helpme out i can not find any solution.

read this and see if it helps: http://support.apple.com/kb/ht2090

I purchased the gaming app from app store and I used it for some time but now suddenly the app is not working properly it's not starting properly and just dies down after the start and comes Back to homepage need help please guys help me out with this!

Guys needed your help with my real racingHD game app it's not working properly even after paying for it I don't know why it's not working having trouble with it cause it won't star smooth need help guys

Read Mitch's post on the sad ipod in this thread:
http://discussions.apple.com/message.jspa?messageID=2369954#2369954

Wifi sudden disconnection and lock button not working properly on my iphone 4s....... It is under warranty

When using wifi on my iphone,sometimes it disconnects automatically...... And my lock button is not working properly.....
What should i do, my iphone is under warranty....

The Sleep/Wake button is a hardware issue and that's covered by the warranty. I would take it to the Apple Store and see what they can do.
Hope that helps

30 pin lightning converter suddenly not working properly in my car

Similar Messages

Maybe you are looking for