3000 C100 Cloned Hard Drive Upgrade will not boot

Hi,
I have recently bought a western digital 320 MB hard drive to replace my C100 hard drive which is now full.
I cloned the old hard drive and when I installed it the laptop wouldn't boot, it just said " no bootable CD in drive". It didn't appear to " see" my new hard drive at all, when I pressed the lenovo tools button and then used F12 to choose my boot option, the laptop just went to a black screen.
Any ideas?
Derek
Solved!
Go to Solution.

I used Spotmau Powersuite 2009.
I thought that there may be issues with the size of the new hard drive ( 320 GB).
I shall now go to the WD website and try the software that you suggest.
Derek

Similar Messages

  • Mid-2009 MacBook Pro sees internal SATA hard drive, but will not boot from or format

    I inherited a Mid-2009 MacBook Pro (15-inch, 2.53 GHz model) with a very strange issue.
    It first presented itself as not being able to boot from the internal SATA hard drive that came with the computer. Nothing I tried could get it to boot, so I assumed the file system was corrupted beyond repair and booted from a CD to try to format the drive. Disk Utility on the CD would not format the drive, giving me strange error messages like "Unable to write to the last block of the device".
    At this point I figured the drive itself must be toast, so I pulled it out and put another known-good SATA hard drive in, booted from CD, and attempted to format. Again, same error messages and an unsuccesful format.
    So I had the bright idea of formatting one of the drives in an external enclosure and then putting it in the MBP to see if OS X would even install. No dice. Get a cryptic error message before installation even begins.
    So I installed OS X on the drive in the external enclosure and put it in the MBP, and it attempts to boot, but never goes anywhere.
    So to sum up, the symptoms I'm seeing:
    MacBook Pro CAN see internal SATA hard drives.
    MacBook Pro WILL NOT boot from any internal SATA hard drive and cannot format or install OS X to any internal SATA hard drive.
    MacBook Pro WILL boot from any CD or external device and seems to work properly otherwise.
    At this point I'm thinking it's one of two things: the hard drive ribbon cable or the SATA controller on the logic board.
    Since the MacBook Pro seems to work completely fine other than this one issue, and will boot properly from both external devices and the CD (also a SATA device), I'm thinking and hoping that it's just the hard drive ribbon cable. From my searches online, I've heard that this batch of MacBook Pros is known to have issues with the hard drive ribbon cable, but it seems in most cases this manifests itself by the Mac not being able to see a drive at all.
    I've done quite a bit of troubleshooting to get to this point, but right now I'm just looking for any feedback at all. Specifically I'd love to know a way I can easily test to see whether it's the logic board or the cable.

    UPDATE: An interesting development!
    I just tried a third known-good SATA hard drive, one which I believe supports SATA I only (but I'm not sure), and unlike the other drives that the Mac sees but cannot properly interact with, the Mac can't even see this one when I put it inside.
    Frustrating as this may be, I believe I'm actually getting closer to a solution since my symptoms now appear to be closely aligned with people having SATA ribbon cable issues.
    Onward!

  • How can I deactivate Photoshop Elements 5.0 on hard drive that will not boot?

    I have Elements 5.0 loaded on a hard drive which will no longer boot. I have a new hard drive and can access the old drive as an extra internal hard drive. I cannot use Photoshop, so I was thinking I need to deactivate the copy loaded on the old hard drive and reload it on the new hard drive. Is this the best solution? If so, how do I deactivate? When I start up the editor, it does not have an option for deactivating as I read about in another post. Under the help menu, there is a grayed out option for Registration. After a few seconds, a window appears saying there is a problem with my serial number and the application closes.  Also, I would like to load Photoshop on a laptop later, so I do not want to waste one of my allowable loads. I would appreciate any help.

    Yes, as long as you don't have it on more than two computers at once you're in compliance with the license. (Back in the days of PSE 5 adobe worked more on the honor system.)

  • After restoring from Time Machine to new Hard drive, system will not boot

    I replaced my hard drive on my Macbook (2008 model) with a larger drive. I then put in my Snow Leopard disk, and followed the steps to restore from Time Machine backup. a few hours later it said it was restored, but when trying to boot up, I just get a blue screen with an occasional flicker to the Leopard screen. I tried an earlier back up as well but with the same results. Any suggestions??

    Same exact problem here just yesterday, folks.
    Got a bigger hard drive on my MacBook Pro (15-inch Core 2 Duo) and installed it. Followed the restore procedures from Gizmodo (http://gizmodo.com/333319/the-secret-of-the-time-machine+assisted-hard-drive-swa p). Then got the blue screen immediately after the chimes.
    I only managed to transfer my old disk content by using CarbonCopyCloner.
    Having said that, your solution looks uselful, Portland Mac! :
    Portland Mac wrote:
    ... But when I decided to try and just do a fresh install and work my way back through all my software, I started by installing Snow Leopard and suddenly it boots and everything from my Time Machine backup is there...
    But I would not say the following:
    Portland Mac wrote:
    ... On a new drive apparently you have to install Snow Leopard before you do a time machine restore.
    Am I mistaken, or did you do a fresh install after restoring your TimeMachine backup?
    In any case, I found an interesting Apple article that might confirm that there is a problem: [Mac OS X v10.6: Issues after restoring a Mac from a Time Machine backup made with a different Mac ("Restore System From Backup…")|http://support.apple.com/kb/TS3243]. Or is it a completely different thing?
    And another discussion that might give some good advice: [http://discussions.apple.com/message.jspa?messageID=12578529#12578529]. Personally, I will now do as the man says: two backups, on two different external hard drives, using different apps, the other one being CarbonCopyCloner...
    For info, and I don't know whether that matters, my backup disk had been full and some past content had been erased automatically by Time Machine. But I don't think this should have mattered...

  • New hard drive.  Will not boot from install dvd.

    Earlier this week, I dropped my computer.
    It was probably a 3 foot fall.
    Computer froze, so I restarted and got the flashing folder with question mark.
    Started in internet recovery, and disk utility confirmed that I had killed my hard drive.
    Got a new hard drive and installed. Started in internet recovery, formatted hard drive. Disk utility says it's good to go.
    Was given the option to install Mavericks, but keep getting an error message.
    Attempted to restart from install dvd that came with the MBP. Tried every startup shortcut there is.
    Optical drive recognizes the disk, but I always get stuck on the gray screen with the wheel.
    Reset PRAM. Reset SMC. Same problems. I do not have access to another mac or a PC with admin rights.
    I'd rather not brave the Apple Store this weekend in the snow in a town that never gets snow (people drive poorly on a good day!).
    Any tips?
    Got the MBP in 2010, new. Was running mountain lion when I dropped it.
    Thanks!

    Yiou can't use Internet recovery on a 2010 Mac notebook to install any version of OS X on it. That is why you are getting that error. You have to use the original System reinstall discs that came with it to install OS X on a new drive or use the OS X reinstall disk to restore from a time machine backup.
    Since your system doesn't seem to want to completely boot from that disc you should try an external DVD drive that connects by USB port as the built in superdrives are known to fail or partially fail at any time. Don't buy an Apple external Superdrive as they only work on Mac computer that did not originally come with a built in DVD drive. Any Brand external DVD drive will work on your Mac except Apples own external DVD drive.

  • Replace hard drive, now will not boot

    Pavilion dv7-6b78us was running windows ultimate
    Had to put a new hard drive the factory one died unexpectedly. Had a 700 gig I think. now have a 350 gig. replaced HD and proceeded to run all the test to make sure it was alright. When I tried to install windows I keep getting No bootable device -- insert boot disk and press any key. I have tried setting it to boot of the internal CD/DVD, didn't do any thing, tried booting of a flash drive copied the OS to the flash drive and set it to boot from Flash memory, still did nothing. Set it to boot from an external cd\dvd usb drive put a new copy of windows in the drive still nothing. Have been in roxio to make a boot disk and copied windows 7 again still nothing happened. I am a collage student and I need to get this thing up and running, any help would be greatly appreciated

    Having same problem! I need help also!

  • When I updated my MAC I lost all my movies from iTunes.  They are still on my hard drive but will not reappear after I reset my preference in advance section.  How do I fix it?

    When I updated my MAC I lost all my movies from iTunes.  They are still on my hard drive but will not reappear after I reset my preference in advance section.  How do I fix it?

    If they are still on your Mac's drive then you should be able to add them back into iTunes via File > Add To Library

  • Hard drive crashed, will not reinstall

    The hard drive on my Mac computer crashed and I backed up all my programs onto an external drive. (I have the Creative Suite 6 Design Standard) When I try to reinstall the programs back onto my new hard drive, it will not work. I did not originally install the Creative Suite with a CD. I assume it was just with a code that I no longer have. When I do transfer the program's files onto my new hard drive and click on any program from the suite, an error pops up saying "Configuration error.. Error:1". Please help, I have been trying to contact support for the last two months.

    you must properly install your programs, not copy the installed files.  you will need your serial number to install and the intallation files (below):
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Premier Pro Project: Created on one External Hard Drive, Transferred to Different External Hard Drive, Project Will Not Open

    Here is my problem listed in simple steps:
    I created a project in Premier a couple years ago on a G-Raid mini external hard drive.
    I backed up my project folder on a LaCie external hard drive. 
    The G-Raid mini hard drive died.
    I cannot open my project from the LaCie drive.
    When I attempt to open my project, I get 2 error messages:
    First:  "The scratch disks are write protected or unavailable. To open this project, the scratch disks will be set to your documents folder. Would you like to continue?"
    I say "Yes"
    Second: "This project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type."
    I say "OK", and that's the end.
    My understanding is that the problem has to do with the fact that my original scratch disks were created on the G-Raid mini hard drive, and that Premier will not open my project because the code for my .prproj file directs Premier to a hard drive that is not connected.  I have tried to edit the code in TextEdit, replacing the name of the old hard drive with the new one where the code reads:
    <project.settings.lastknowngoodprojectpath>
    This did not work.  I also tried changing the name of my new hard drive to match what the "lastknowngoodprojectpath" reads as in the code, but that did not work either.  I have searched high and low on the internet for someone who approaches the types of error messages I receive from the perspective of trying to open the project from a different hard drive, but I cannot find anyone who is specifically giving advice about this.  Any suggestions?

    I doubt that the error concerning the sequence preview preset file or codec has anything to do with the scratch disc location.
    Here are two posts specific to the second error message:
    FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro?
    What to do when you get a preview preset codec error in Adobe Premiere Pro CS6 | Val Gameiro, Writer, Director, Filmmake…

  • Data Recovery off of a drive that will not boot

    I have a server which will not boot into windows, I really just need to grab a few files off of it, I have downloaded several types of software and of course there is a limit on how much it will restore then it wants you to pay, the size is about 52 gb's, I used to use WINPE, does anyone have a piece of software that is free that I can recover this data since I can not boot into windows?
    This topic first appeared in the Spiceworks Community

    Did you do this:
    Repair the Hard Drive
    Boot from your Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. Select the external volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. Quit the installer to restart the computer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    See if this works to repair the drive.

  • Satellite A665-S6050 Windows 7 Home Premium Memory Upgrade will not boot

    Hope there might be a clue to assist.
    Checked Toshiba support for recommended memory to upgrade from 2X2GB to 2X4GB.  Ordered Kingston KTT-S3BS/4G x 2 as recommended.  BIOS recognizes the memory, but Windows will not boot.  Tried Safe Mode and hangs after a few seconds.  Tried Repair Computer, also hangs after a few seconds.  Put original memory back in and it boots fine.  There was a brief flash of a blue screen once, but no dump file to be found.
    To me it seems as ifthe issue is Windows, but I do not know enough about this to say definitively.  Just based on the percieved behavior when Windows trys to boot (hanging).
    Any ideas appreciated before I go through return and try something else.
    Thanks.
    Toshiba Satellite A665-S6050
    Windows 7 Home Premium 64 bit

    he ordered from Toshiba and there memory did not work  ...    the kit he ordered was the one recommended for his laptop from Toshiba and ordered from Toshiba
    Yes he did. But he ordered the Kingston memory that Toshiba recommended as he said...
    Checked Toshiba support for recommended memory to upgrade from 2X2GB to 2X4GB.  Ordered Kingston KTT-S3BS/4G x 2 as recommended.   ...   I tried both of the Kingston modules recommended and neither worked.
    I'm suggesting that he try the Toshiba part number (PA3677U-1M4G) suggested in the spec, which is made by Axiom.
    -Jerry

  • How do you erase an external hard drive which will not show up on your computer?

    I bought a LaCie porsche design 2TB external hard drive  from the Apple Store to use with time machine on my MAC 2 months ago. It will no longer show up on my desktopn. After speaking with LaCie, they sent me a replacement. However, I have to send the brooken one back to them and since we could not erase it or anything on my Mac is there anyway to erase the hard drive before sending it back to them with all my information on there?
    Message was edited by: carolsh

    I know. But after Yahoo, Target , Neimans and others. But I agree. They even sent me a more expensive replacement as they did not have my model in stock and is backordered. So, a win win situation. I was impressed that the tech person spent about an hour on the phone with me trying a variety of options. At first, they were going to charge me shipping- but then she changed her mind and shipped the replacement 1 day fed ex. I guess that is why I always buy LaCie vs others. My older LaCie which I still had but was smaller- I plugged in and did a back-up and I had just enough room on it so I have that for safe keepings now as well.
    Thanks again for your pleasant response. I guess I need to limit my profile to "registered members" only. I hope Apple monitors these discussions and people's responses periodically.

  • Hard Drive Tray will not fit after attaching hard drive

    (From Davin Oishi)
    Issue: After installing the hard  drive onto the hard drive tray, the tray will not longer fit into the  Smart Storage hard disk drive slot.
    Using hard drive tray  screws from the legacy NSS2000, NSS3000, NSS4000, or NSS6000 may  encounter this issue.
    Resolution: Be sure to use the hard drive  screws that are supplied with your Smart Storage device.  Smart Storage  ships with screws for both 3.5" SATA drives and 2.5" SATA drives.

    If they are still on your Mac's drive then you should be able to add them back into iTunes via File > Add To Library

  • Hello my name is Tyesha Woods,and I have a problem with my dvd hard drive, it will not eject my cd no matter what i do can you please help me?

    Hello, my name is Tyesha Woods I onw a Macbook and my dvd hard drive will not ejected my cd ,I have tryed everthing I could would you please help me?

    Hi Tyesha,
    Your DVD won't eject?
    Restart the MacBook - as it is restarting, hold the trackpad button down. This will force it to eject. The disk should eject before you get to the login screen or desktop.

  • Macbook pro hard drive upgrade - will it work on my spec?

    Hi People
    Basically looking for advise, as i know the basics, but heard there could be issues with the drive i want and macbook Pro's, so looking for advice whether the drive will work or not.
    Now i know that i need the hard drives without the shock protection built in, for example i need the seagate AS range and not the ASG Range.
    however iv heard issues with this drive in some mbp's spinning up and down, will this happen on my Macbook pro?? The drive i'm wanting is the Western Digital Scorpio Blue 640gb Sata drive - WD6400BEVT
    the spec of my machine is 2.5ghz penryn Non unibody, 4gb ram, 15.4" mbp
    Hardware Overview:
    Model Name: MacBook Pro
    Model Identifier: MacBookPro4,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.5 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 6 MB
    Memory: 4 GB
    Bus Speed: 800 MHz
    Boot ROM Version: MBP41.00C1.B00
    SMC Version (system): 1.27f2
    the drive i'm wanting is the Western Digital Scorpio Blue 640gb Sata drive - WD6400BEVT
    specs of drive are - http://www.wdc.com/en/products/products.asp?driveid=683
    Performance Specifications
    Rotational Speed 5,400 RPM (nominal)
    Buffer Size 8 MB
    Average Latency 5.50 ms (nominal)
    Seek Times
    Read Seek Time 12.0 ms
    Track-To-Track Seek Time 2.0 ms (average)
    Transfer Rates
    Buffer To Host (Serial ATA) 3 Gb/s (Max)
    Physical Specifications
    Formatted Capacity 640,135 MB
    Capacity 640 GB
    Interface SATA 3 Gb/s
    User Sectors Per Drive 1,250,263,728
    Physical Dimensions
    English
    Height 0.374 Inches
    Length 3.94 Inches
    Width 2.75 Inches
    Weight 0.26 Pounds
    Metric
    Height 9.5 mm
    Length 100.2 mm
    Width 69.85 mm
    Weight 0.117 kg
    Environmental Specifications
    Acoustics
    Idle Mode 24 dBA (average)
    Seek Mode 0 26 dBA (average)
    Temperature (English)
    Operating 32° F to 140° F
    Non-operating -40° F to 149° F
    Temperature (Metric)
    Operating -0° C to 60° C
    Non-operating -40° C to 65° C
    Humidity
    Operating 8% to 95% Non-condensing
    Non-operating 5-95% RH non-condensing
    Altitude (English)
    Operating -1,000 feet to 10,000 feet
    Non-operating -1,000 feet to 40,000 feet
    Altitude (Metric)
    Operating -305M to 3,050M
    Non-operating -305M to 12,200M
    Vibration
    Operating 0.00459 g²/Hz (10 to 500 Hz)
    Non-operating 0.05102 g²/Hz (10 to 500 Hz)
    Electrical Specifications
    Current Requirements
    5 VDC
    Read/Write 500 mA
    Idle 400 mA
    Standby 50 mA
    Sleep 20 mA
    Power Dissipation
    Read/Write 2.50 Watts
    Idle 0.85 Watts
    Standby 0.25 Watts
    Sleep 0.10 Watts

    People have been having some trouble with this drive. You might want to look at this discussion on the 640 WD:
    http://discussions.apple.com/thread.jspa?threadID=2250690&start=0&tstart=0
    Don't know if WD has resolved the issue yet or not--might be good to check with them before purchasing.
    Good luck!

Maybe you are looking for