3000 C200 (8892 - kg) model sound problem on win7 upgrade

Hello!
I have a "little" problem with the sound device. Headphones does not mute the main speakers. I've been through many posts and forums. The symptoms are:
headphones wont show at all in the sound panel menu nor is there a separate volume control for them available, they wont show even in the sound advanced tab. However, when i plug in/out the headphones jack the relatek hd audio manager does show that action but it does not mute the speakers.
Here's what i tried:
I updated the BIOS to the latest version, 2.08 and payed attention to update the "realtek" bios version.
I tried many realtek drivers. I updated the lenovo system platform driver. I uninstalled all drivers than installed the intel inf update before all and then installed sound drivers again. I read somewhere to try install the alcxxx drivers first the the realtek r drivers, i did it with no sucess. Every possible combination gave me the same result. Speakers and headphones working at the same time, no volume control for the headphones nor they're shown in the sound devices (realtek 2nd hd ouptut i guess).
I am a "little" frustrated now but calm cause i got already the name for such situations "factor X" as simple as that
Anyone has any further suggestion/idea??? Very much appreciated, thanks in advance!!!
Did i forgot to mention something?

maybe there's something wrong with the headphones in/out port ( jack)
have you tried to use another headphone? - also make sure you connect the headphones well -
or try vista drivers instead of

Similar Messages

Sound problems after system upgrade

I am having intermittent sound problems on my ipad2 after I upgraded to 6. When this occurs my volume control doesn't work. This problem occurs sometimes in the middle of playing a video.

hhhmm, thanks for the answer,
i reinstalled alsa-driver, run depmod -a & then try to load the modules & it doesn't work! i always get :
Can't locate module snd-pcm-oss
that happens with all the modules i try to load. & my modules are still in
/lib/modules/2.4.24/kernel/sound
is there a way i can load them from there or copy them somewhere else or i don't know what else.
thanks for the help though!
Shemeta

Hdmi sound problem since videocard upgrade to R9 290x.

Hello
i recently upgraded my videocard from Radeon 6870 to R9 290x. Since the upgrade the hdmi audio playback sound realy delayed und noisy.
aplay -l
**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 0: SB [HDA ATI SB], Gerät 0: ALC889 Analog [ALC889 Analog]
Sub-Geräte: 0/1
Sub-Gerät #0: subdevice #0
Karte 0: SB [HDA ATI SB], Gerät 1: ALC889 Digital [ALC889 Digital]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 1: Generic [HD-Audio Generic], Gerät 3: HDMI 0 [HDMI 0]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 1: Generic [HD-Audio Generic], Gerät 7: HDMI 1 [HDMI 1]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 1: Generic [HD-Audio Generic], Gerät 8: HDMI 2 [HDMI 2]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 1: Generic [HD-Audio Generic], Gerät 9: HDMI 3 [HDMI 3]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 1: Generic [HD-Audio Generic], Gerät 10: HDMI 4 [HDMI 4]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 1: Generic [HD-Audio Generic], Gerät 11: HDMI 5 [HDMI 5]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
lspci -v |grep Audio
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device aac8
cat /proc/asound/card*/code*|grep Codec
Codec: Realtek ALC889
Codec: ATI R6xx HDMI
Some one with the same problem here?

Hubrisnxs wrote:
Ahhhhh, Most tv's have a couple or more, you may want to try Component cables then, You can call Verizon or open a live chat, they may send you some for free, or they may point you towards their website www.verizon.com/fiosaccessories
I'd open a live chat and see if I could get them for free personally, but they are also very cheap at www.amazon.com
They are HD cables that support upto 1080p
GEEZ, I can't be the only person having this issue. I will try 1 call to them to see what they say. Thanks for your input.

Sound problems with iOS6 upgrade

Recently, I have found myself without normal sound when the sound feature of the phone is turned on.
Sound I have: Call tone, sounds for setting up call ringtone.
Sounds I don't have: Music through speakers, video sound, text tone, keyboard tone, text tone when setting up message alert, connection sound for power supply.
These all work if I hook my phone up to AUX. The unmute is on, media volume is all the way up, and when I press the up botton on the side of the phone, it recognizes "ringtone" it just won't add the dashes to show my phone is getting turned up.
This is a VERY big pain being it's as if my phone is on silent at all times. Can anyone assist me with this? Have the same problem? Know how to fix?

I had the same thing happen to my iPhone 4s after ios6 upgrade!!!!!! This isnt right that we have to deal with these issues from Apple!!! With all the money that Apple pulls in you would think they would be able to come up with the right kind of software updates!!!! And if they cant dont come up with a new update (That we have to download or our apps,etc wont work right) that isnt going to work on ALL THE iPHONES!!!!! Not just the iPhone 5!!!!!!!!!!!! I hade to take mine to Verizon and they tried everything they new to try and it didnt fix it so they ordered me another one and I got a ST@#ID REFURBISHED 64g iPHONE!!!!!! When I bought mine brand new FULL RETAIL!!!!!! I just got it today and I guess it's messed up TOO!!!!! Because I can hear kind of a low static sound coming from the ear speaker when I put it up to my ear!!!!!!!!!!! I swear when I'm up for my upgrade I will NEVER GET ANOTHER APPLE PRODUCT AS LONG AS I LIVE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Sound problem - Iphone 4s upgrade to iOS6

After upgrading 4s to iOS6, sound lags and distorts, also volume slider set to minimun is still loud.
Any suggestions?
M.

After charging the phone with a Philips music-dock-station and fiddling with the volume buttons on the dock,
the sound seems to be back to normal.
Could be worth a try...
M.

[Satellite L645d-S4036] Grahical and Sound problems post-Win10 Upgrade

Hello. Af ter upgrading to Win10, I suffered from two major issues. I rolled back to 7 until I can resolve them. 1) My sound was not working. My headset was fine, as it has it's own driver, but the Conexant sound was not functional. 2) My graphics were not working properly. If I tried to launch a game, the graphics would crash. Can anyone help me, maybe with more current drivers? Sound: Conexant CX20587 SmartAudio HD, Version 4.112.0.61 Graphics: ATI Mobility Radeon HD 4200, Version 8.970.100.1100 (I just updated this)

This would be for the AMD card. http://support.amd.com/en-us/download/mobile?os=Windows+10+-+64 (if using 64bit Windows 10) http://support.amd.com/en-us/download/mobile?os=Windows+10+-+32 (if using 32bit Windows 10) For the audio, I believe there is an updated driver from driverscape, however, I don't have it so I cannot test it.

Presario CQ60 On-board microphone problem after Win7 upgrade

I upgraded my new Presario CQ60-409SA with the HP supplied Win7 DVD. Since then my on-board microphone has stopped receiving input. Plugging an in-line mic into the front jack works fine, but absolutely no response from the on-board one. I have checked that the mic is not muted. Dale in HP support centre suggested I uninstall the drivers and restart. This unfortunately did not work. Can anyone help? I am using the latest drivers from the HP site (SP-45166). Many thanks.

I'd REALLY love some help with this one. Is anyone from HP able to assist? Has anyone else had the same problem? The mic was fine in Vista, but the system just doesn't seem to pick up that it's there in Win7. External works fine. Any ideas????

Screen problem 3000 c200

Hello,
My 3000 c200 Lenovo screen turned to half working normally and the other half is not working normally.
this is a screenshot
Please get me back with any suggestions.

Hi fadi_nzr,
Welcome to Lenovo Community Forums!
I’m sorry to know that the display is not working as expected in your c200 All-In-One computer, below are the steps to diagnose the issue.
To perform “Flee Power” remove the power cable and any other peripheral device connected to the computer. Hold the power button for 10 seconds and then connect back the cable and check, if the issue is same.
Check in BIOS, to get into BIOS restart the computer and then press Fn+F1 if the issue persists, then the issue is with hardware.
I would Strongly Suggest Calling Technical Support for Assistance this is the only available option to get this query resolved.
Click here to open a link where you can select the country and get the exact contact support number, I’m sure they will be a great help.
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

3000 N100 0689-A42 BIOS update problem

I bought this laptop one years ago and it came with 63ET62WW, V1.08 BIOS. After then, I haven't updated any BIOS.
But today, I go to the website BIOS Update Utility - 3000 C200, N100 and download the 63af07us V3.11 BIOS (DL01108A.WPH). I run th AdRomLdr.exe as a administrator under Vista Basic. Then a Phoenix WinPhlash windows pops up. Next, I flash the bios without battery and external USB device. After all, it says the BIOS succeed to update and shut down Windows automatically.
The problem is: when the laptop reboot, it still shows the V1.08 BIOS, not the V3.11 BIOS.
1. Does it mean the BIOS update is fail?
2. What should I do in order to update my bios sucessfully.

Hi Joseph, I don't know whether my guidance is still relevant for you and others after all this time but anyways, here goes. the version v3.11 is the version number for the bios utility file 63af07us and not for the actual bios that is going to be installed. as the bios image file in version 3.11 is DL01108A.WPH, the version number for the bios is also 1.08. even the latest utilisty version 3.12, file 63AF08US, which is only meant for XP loaded models has the same bios version 1.08 (actually meant for vista models) being installed on XP loaded lenovo n100 models. As I have XP on my N100, I can't even get the dam 3.12 utility to install the XP bios like it is supposed to.
So rest assured that you laptop has the latest verion of the bios, i.e. the version 63ET62WW, V1.08 BIOS
Regards,
ozzi

Lenovo 3000 C200 turns on but fails to start

Greetings all!
I have a problem with my Lenovo 3000 C200 and I'm hoping someone can help. Please be patient with me as I'm not as good with computers as I am with larger equipment. The problem goes like this:
I bought the laptop used about a year ago, running Windows Vista Business. It has worked without any problems until a recent work related trip to California 3 weeks ago where a balloon popped up telling me Windows Live OneCare was expiring and I needed to uninstall it and replace it with a different antivirus software. I didn't think much about it at the time and was going to install the newest version of Norton when I got home and back to work but before I could, I started getting the following error messages popping up on the screen during startup and intermittently while the computer was running
SYNTPENH.EXE (code 0cx0000142)
RTHDVCPL.EXE
MSASCUI.EXE
PHOTOSCREENSAVER.SCR
SHELLEXECUTEEXFAILED (code 3221225794)
one of the guys I work with suggested I uninstall Windows Live OneCare and restart the computer but when I tried I noticed the "change/remove programs" prompt was missing. Also, I was unable to open Word documents, Excel files, download programs from the internet, etc.
another coworker suggested it might be a virus or Trojan and attempted to connect his laptop to mine via a Belkin Easy Transfer Cable, thinking he would scan my hard drive remotely with the antivirus software on his computer and remove anything harmful. As soon as the cable was connected, it flashed an application error message on the screen of my Lenovo (I didn't see exactly what it said) and about 30 seconds later my screen went black.
Now, when I press the power button, the fan comes on, it starts to make noise, the CD drive will start to spool up (if there's a disc in it) but stops before actually doing anything. Doesn't seem to matter if it's plugged in or running on battery, none of the F keys seem to do anything during this time and the screen never comes on. I've tried running the boot disc that came with it but no luck there either.
I don't use this computer for much other than checking email when away from home, charging my phone and ipod and watching movies or doing paperwork on the plane. Unfortunately, I'm away from home a lot so it's pretty inconvenient to be without it!
If anyone has a suggestion I'd really appreciate the help! If you've already covered this someplace else, please forgive the repost. And sorry for the book, just not sure what info might be helpful.
thanks in advance!
Roger

Ok, here's the results:
Tried plugged in but with battery out - no change
Unplugged, removed battery, held power button for 30 seconds, reinstalled battery, replugged - no change
Removed memory modules and reinstalled in original positions - no change
Removed modules and tried one at a time in different positions - this did change things! One module had no change in either location, the other allowed the computer to start and run (back to the point of the original problems with the error messages and unable to open word docs, etc) in both locations. Installing the second (bad?) module in addition to the "good" module caused the computer to not start again, removed it and computer restarts fine.
So I'm guessing I need to replace the one apparently defective memory module and see if that takes care of the rest of the problems? Or is there something else I need to do to address the error messages and functionality issues?
And by the way, thanks for all the help!

A30 sound problem

have tried all drivers from toshiba web sites, uk, canada, europe etc but cannot get sound to work on my satellite a30, model no PSA33E 7C3F3 EN, fresh install of xp had 4 drivers missing, ati video, smbus, modem and sound, only drivers from canada site worked for video smbus and modem, xp states sound working properly but no sound from speakers or headphone socket and have checked all volume levels (on full nothing muted), any ideas ???

Hi,
Just to inform you that my problem was solved by itself :)
I've reformatted my laptop and installed the original XP Pro SP2 again by following the instructions.
Sound problem was solved automatically, no chipset utility installation required..
The sound problem was probably caused due to missing Microsoft KB835221 update for SP1, and KB888111 for SP2, which then was solved with the original latest XP..
Rgrds..

Protege M600 Sound Problem

Protege M600 Sound ProblemI have reinstall my laptop to windows Xp Sp3,
I have try to install sound driver and warning message show: "Cannot Access Volume Control"
Could you help me to solve this problem.
OS: windows XP sp3
Toshiba Portege M600
Model No: PPM61K-01300D
i have try to download any sound driver but it's can't work. pls help me
thank for you cooperation

Hoang
It appears you have a Korean model. Is your Windows XP in Korean or in English?
Try this driver from Toshiba Korea.
Toshiba Korea Portege M600 WinXP Sound Driver
To manually reinstall the Toshiba drivers and utilities the order is important, 1st install all the Toshiba hardware drivers and hardware utilities, 2nd install the Toshiba utilities and software, in this order:
1st Toshiba Hardware Drivers & Hardware Utilities:
1) Chipset Driver/Utility
2) Display Driver
3) Sound Driver
4) All other hardware drivers, patches, and hardware utilities
2nd Toshiba Utilities and Software:
1) Toshiba Controls
2) Toshiba Hot Key Utility
3) All other Toshiba utilities and software
Let us know what happens. Good luck.
Mike

AS5920G sound problem ....

With my sound card, the sound is too low and microphones do not work.
[ubermensch@arch-tux ~]$ sudo lspci -d 8086:284b -vv
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
Subsystem: Acer Incorporated [ALI] Aspire 5920G
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f3500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Mask- 64bit+ Count=1/1 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Virtual Channel <?>
Capabilities: [130] Root Complex Link <?>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
[ubermensch@arch-tux ~]$
[ubermensch@arch-tux ~]$ cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.20.
[ubermensch@arch-tux ~]$
[ubermensch@arch-tux ~]$ cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xf3500000 irq 22
[ubermensch@arch-tux ~]$
[ubermensch@arch-tux ~]$ cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.20.
[ubermensch@arch-tux ~]$ cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xf3500000 irq 22
[ubermensch@arch-tux ~]$ cat /proc/asound/modules
0 snd_hda_intel
[ubermensch@arch-tux ~]$ cat /etc/modprobe.d/50-sound.conf
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
options snd-hda-intel model=auto probe_mask=1
[ubermensch@arch-tux ~]$
[ubermensch@arch-tux ~]$ aplay -L
default:CARD=Intel
HDA Intel, ALC1200 Analog
Default Audio Device
front:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
Front speakers
surround40:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Intel,DEV=0
HDA Intel, ALC1200 Digital
IEC958 (S/PDIF) Digital Audio Output
null
Discard all samples (playback) or generate zero samples (capture)
[ubermensch@arch-tux ~]$
:cool:

What type of sound problem are you having- low sound, static, no sound at all,etc?
Get your Product Number by pressing Fn + Esc key or check the Service Tag attached to bottom, may be under battery.Post it.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Re: IDT High Definition Audio CODEC (NO SOUND PROBLEM) Options

I have been trying for 3 days to fix this issue & I even had Bicrosft tech support on line remote PC acces take control of my PC, and still can't get the sound to work!
Does any one know how to fix this issue? DEFINITIVELY?
IDT High Definition Audio CODEC (NO SOUND PROBLEM)
‎03-20-2013 05:24 AM
My PC info is:
Manufacture: Hewlett-Packard
Model: HP EliteBook 8460p
Rating: 5.3 Windows Experience Index
Processor: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz 2.50GHz
Installed memory (RAM): 4.00 GB (2.98 GB usable)
System type: 64-bit Operating System
Pen and Touch: No Pen or Touch Input is available for this Display
Windows 7 Professional
Product ID: 00371-OEM-8992671-00008
Problem: I was watching a movie a night before, and I muted and forgot to turn off my laptop, today I found out the sound did not work, so I tried restarting and still no hope, i tried disabling and enabling the IDT High Definition Audio CODEC and still no hope, windows says that this device is working properly, but oviously its not I really need help, I dont know anything advanced about technology yet, so im helpless.
T
Re: IDT High Definition Audio CODEC (NO SOUND PROBLEM)
‎03-20-2013 05:28 AM
I also tried leaving the Laptop to cooldown for about 3 hours and still no sound.
DavidPK
Re: IDT High Definition Audio CODEC (NO SOUND PROBLEM)
s
‎03-20-2013 05:40 AM
Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
ftp://ftp.hp.com/pub/softpaq/sp59001-59500/sp59291.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow thisand then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Start the notebook and let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
Regards,
DP-K

Hello DesertWildcat,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are having and issue with your HP EliteBook 8460p's audio not working. I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

IDT High Definition Audio Codec Missing (No Sound Problem)

Okay, so I was trying to fix my cracking sound problem and I thought of uninstalling one of the not-working-drivers and ended up uninstalling this one. My Bad, ofcourse!
I cannot get a link to re-download this driver, so that I can make this sound problem work. Please, please help.
Computer Configuration :
Processor : Intel(R) Core(TM) i3-2370M CPU @ 2.40GHz, 2394 Mhz, 1 Core(s), 1 Logical Processor(s)
RAM : 2 gig.
Model Name : Pavilion g6 2102tx
Please help out.
Thank you so much in advance, Expert.

Hi:
There are no W7 32 bit drivers for your model.
You can try the IDT Audio driver from this business notebook and see if it works...
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229456&swItemId=ob_115135_1&swEnvOid=405...

3000 C200 (8892 - kg) model sound problem on win7 upgrade

Similar Messages

Maybe you are looking for