3000 C200 Switch display when LCD is broken - SOLVED
I want to install windows but it is automatically diskplaying on the built-in screen (which is broken). What keystrokes do I press in BIOS? (I've tried F9 -> Enter -> F10 -> enter to no success).
The ubuntu install disk works but I don't want to use Linux on this machine.
SOLVED: Press power and wait 3-5 seconds -> press F1 -> right -> down -> enter -> down -> enter -> F10 -> enter.
Okay, let us move on. Disconnect the external monitor, remove battery from the laptop, unplug laptop cable for a few minutes, put everything back on and press the following combination in the this exact order: Fn+F3+Caps. If that does not help either, try to perform steps from this thread: https://forums.lenovo.com/t5/Lenovo-3000-and-Essential/G555-help-enable-external-display-from-BIOS/t...
Microsoft Certified IT Professional (MCITP)
Similar Messages
-
Hooking iMac to external display when LCD is broken
Per the Genious bar people at the Apple store, the LCD display on my iMac is broken. She told me I could hook it up to an external display and use it or I could get it fixed. I decided to hook it up to an external display, but from searching other forumns, it looks like it is only extending what is on my desktop and not mirroring it because all I see is the background of my desktop, no icons. Apparently, I need to go into System preferences and change something. How can I do this if nothing is showing on the iMac LCD display? Is there a shortcut key on the keybord or something?
CMD F1 was the keyboard shortcut....
-
Hi,
Grandson in a bit of a pickle (needs this for school) so he turned to me and I don't have an answer, hopefully one of you fine folks can help
He has a Lenovo 3000 c200 and the power adapter has broken and needs to be replaced.
Someone has offered to lend him their adapter from a Lenovo Thinkpad X60
I looked up the adapter on the Lenovo site and it appears to indicate that the adapter is the same for both models and therefore he can use the X60 one on the C200....
Can someone verify of that is correct?
Many thanks in advance
Al
Solved!
Go to Solution.both of them has same specifications such as 20v, 4,5a, 90 watt, input : 100-240v ~ 1.5a 50/60 hz.
so, he can use it. ( still to make sure, check specifications by yourself, too )
*according to these pages:
http://cgi.ebay.com/NEW-AC-Power-Adapter-Cord-IBM-Lenovo-3000-C200-N200-/390229571340?pt=Laptop_Adap...
http://cgi.ebay.com/AC-Adapter-IBM-Lenovo-40Y7659-Thinkpad-Z60-T60-X60-/360293001211?pt=AU_Laptop_Ac... -
Loose fullscreen when LCD switched off
I wonder if I can get some help with a problem I have please.
I have a Mac Mini, running two 32" LCD displays mirroring the desktop (one main, one secondary, both showing the same desktop), (utilising the two videos outputs that only Mac Minis have, converted to HDMI with adaptors and audio out cabled separately), running a fullscreen movie presentation. Recently upgraded from a Keynote presentation to a quicktime movie (someone thought sound and movies would be more interesting, and Keynote could not handle the movie clip lengths). When it was on Keynote we could switch off the LCDs at night, leave the Mac Mini running, and then switch on again in the morning and the presentation would be still in fullscreen. In quicktime (v 10.0 OS 10.6), if the LCDs are switched off, then on, they loose fullscreen and have to be put back in cmd+F & cmd+L and then the mouse moved to loose the menu bar. I was wondering if there is a fix for this, that would keep quicktime in fullscreen after the LCDs were switched off, either an automator or console script, or some setting I am missing, would quicktime pro help? Any ideas, I am new to movies and quicktime, but not the mac.Solve the Issue,
Shut down the Mac
Remove the Power Cabale (wait for 10 seconds)
Connect the Power Cable and Switch on the Mac using the power button and Press CMD+ALT+P+R together.
Dont leave untill you see a qyuck restart -
Adobe Reader, MS Office window size changing when switching displays
I have a current generation (mid 2012) MBP with Retina Display running ML 10.8.3. I also have a Dell U2413 monitor, confgured for
1920x1200 resolution, connected via a Thunderbolt to Display Port cable that came with the monitor.
When I switch displays, Adobe reader, Excel, and Powerpoint all have their window sizes change dramatically. Reader
shrinks to just the status bar and is tucked in the very bottom left hand corner (it took me quite some time to even see it
was there at all); Excel windows expand dramatically to be much larger than full screen, and Powerpoint windows shrink
to about 1.5" square. Other windows (Mail, Chrome, Safari, iTunes) change or move slightly but are more or less OK.
I know this problem is expected when switching to an external monitor with dramatically lower resolution (e.g. old In Focus
projectors) but I don't believe it should happen with a hi-res monitor like the one I'm using.
I have compared this behaviour with other users running same SW versions and external monitors with the same
resoultion and they don't see this problem so I'm guessing there's some configuration option or low level setting
that is messed up.
These window size changes happen going both from internal to external and external to internal. Any ideas?I have a current generation (mid 2012) MBP with Retina Display running ML 10.8.3. I also have a Dell U2413 monitor, confgured for
1920x1200 resolution, connected via a Thunderbolt to Display Port cable that came with the monitor.
When I switch displays, Adobe reader, Excel, and Powerpoint all have their window sizes change dramatically. Reader
shrinks to just the status bar and is tucked in the very bottom left hand corner (it took me quite some time to even see it
was there at all); Excel windows expand dramatically to be much larger than full screen, and Powerpoint windows shrink
to about 1.5" square. Other windows (Mail, Chrome, Safari, iTunes) change or move slightly but are more or less OK.
I know this problem is expected when switching to an external monitor with dramatically lower resolution (e.g. old In Focus
projectors) but I don't believe it should happen with a hi-res monitor like the one I'm using.
I have compared this behaviour with other users running same SW versions and external monitors with the same
resoultion and they don't see this problem so I'm guessing there's some configuration option or low level setting
that is messed up.
These window size changes happen going both from internal to external and external to internal. Any ideas? -
why does my preferred desktop display immediately switch horizontally to another display when I open an icon on the current desktop?
That's not a shortcut you are creating with "save as", you are saving a copy of the webpage to your desktop - hence the folder with files for that webpage.
https://support.mozilla.com/en-US/kb/Creating+a+desktop+shortcut+to+a+web+page -
My LCD is broken - There's no display image
My LCD is broken, so i need a new one, could anyone please help me in this matter. I have several question and don't know where to ask:
1) My Ipod is still in warranty period, but i dont know broken LCD is covered by Apple or not?
2) If I have to pay, how much is it and where's i can get a new one, including repair cost of course?
3) I'Box (Authorized Service Provider) in Indonesia, could not help me much. I need to compare the information i got, I need to contact the Authorized over sea's like Singapore or others, Could I contact them via email?I figured both problems out!!
-
The color profile switch automatically when opening some applications.
Im using the 2012 high-end 15" mac book pro, when I open an apllication such as iPhoto, the color profile switch to "Display" from "Color LCD".
When I quit the iPhoto it switch back to "Color LCD"
How to solve it?Why does my monitor change colors when the graphics adapter changes?
-
I was told of an application that will allow the use of a second screen to view my data and files, but I forgot its name. I'd like to make the connection because my LCD is broken.
You don't need an application, just plug a compaitble monitor into the display port of your MacBook Pro, set the screen up in System Preferences>Displays
-
Lenovo 3000 C200 turns on but fails to start
Greetings all!
I have a problem with my Lenovo 3000 C200 and I'm hoping someone can help. Please be patient with me as I'm not as good with computers as I am with larger equipment. The problem goes like this:
I bought the laptop used about a year ago, running Windows Vista Business. It has worked without any problems until a recent work related trip to California 3 weeks ago where a balloon popped up telling me Windows Live OneCare was expiring and I needed to uninstall it and replace it with a different antivirus software. I didn't think much about it at the time and was going to install the newest version of Norton when I got home and back to work but before I could, I started getting the following error messages popping up on the screen during startup and intermittently while the computer was running
SYNTPENH.EXE (code 0cx0000142)
RTHDVCPL.EXE
MSASCUI.EXE
PHOTOSCREENSAVER.SCR
SHELLEXECUTEEXFAILED (code 3221225794)
one of the guys I work with suggested I uninstall Windows Live OneCare and restart the computer but when I tried I noticed the "change/remove programs" prompt was missing. Also, I was unable to open Word documents, Excel files, download programs from the internet, etc.
another coworker suggested it might be a virus or Trojan and attempted to connect his laptop to mine via a Belkin Easy Transfer Cable, thinking he would scan my hard drive remotely with the antivirus software on his computer and remove anything harmful. As soon as the cable was connected, it flashed an application error message on the screen of my Lenovo (I didn't see exactly what it said) and about 30 seconds later my screen went black.
Now, when I press the power button, the fan comes on, it starts to make noise, the CD drive will start to spool up (if there's a disc in it) but stops before actually doing anything. Doesn't seem to matter if it's plugged in or running on battery, none of the F keys seem to do anything during this time and the screen never comes on. I've tried running the boot disc that came with it but no luck there either.
I don't use this computer for much other than checking email when away from home, charging my phone and ipod and watching movies or doing paperwork on the plane. Unfortunately, I'm away from home a lot so it's pretty inconvenient to be without it!
If anyone has a suggestion I'd really appreciate the help! If you've already covered this someplace else, please forgive the repost. And sorry for the book, just not sure what info might be helpful.
thanks in advance!
RogerOk, here's the results:
Tried plugged in but with battery out - no change
Unplugged, removed battery, held power button for 30 seconds, reinstalled battery, replugged - no change
Removed memory modules and reinstalled in original positions - no change
Removed modules and tried one at a time in different positions - this did change things! One module had no change in either location, the other allowed the computer to start and run (back to the point of the original problems with the error messages and unable to open word docs, etc) in both locations. Installing the second (bad?) module in addition to the "good" module caused the computer to not start again, removed it and computer restarts fine.
So I'm guessing I need to replace the one apparently defective memory module and see if that takes care of the rest of the problems? Or is there something else I need to do to address the error messages and functionality issues?
And by the way, thanks for all the help! -
Changing the size of images displayed when a thumbnail is clicked
In an Aperture gallery, how do I change the size an image is displayed when a thumbnail is clicked. There are sliders for changing the size of the thumbnail; I can't find an adjustment anywhere for the size an image is displayed when the curved arrow in the upper left hand corner is clicked.
Help!
--KenoliHi Kenoli,
In an Aperture gallery, how do I change the size an image is displayed when a thumbnail is clicked.
Do you mean "double-clicked"? In "Browser" mode, when I click on a photo, nothing changes. However, when I double-click on a photo, it switches to "Viewer" mode.
However, I'm missing the curved arrow that you mention. I can't find any photos with a curved arrow over them in any mode. In fact, the only overlays are the badges in the lower right.
Can you be a little more specific about exactly what mode you are in?
nathan -
EOS 70D : Slow shutter speed when LCD screen turned on
Hi !
Need your help. I am beginner & I have new 70D camera. When LCD panel turned off, the shutter speed is quite fast. When I turn on LCD Panel, the shutter speed automatically slows down & sounds annoying. The pictures are same in both cases. Also, the high speed continuous photo shoot, the shutter speed slows down when the LCD panel is turned on. Please help me to fix this.
Solved!
Go to Solution.There is nothing wrong with your camera. It is working as it should when using LiveView.
There are two different types of Auto Focus:
1) Normally with a Film SLR or Digital SLR, you look through the optical viewfinder and view your scene through the lens of the camera. Behind the lens a mirror reflects the image up into the optical viewfinder. When using the viewfinder the camera uses "Phase Detection" Auto Focus. With PD AF the image passes through a transparent part of the mirror to PD AF sensors below the mirror. When you half press the shutter button the AF operates and when you fully press the shutter button the mirror flips up out of the way to allow the image to reach the image sensor behind the now open shutter curtain. While the mirror is flipped up, you can not see anything through the optical viewfinder. This all takes place very quickly and makes a fair bit of noise from the action of the mirror flipping back and forth and the shutter curtain opening and closing.
2) When using LiveView on a DSLR, the rear LCD image displays the image. In order to for this to happen the mirror must be flipped up and the shutter curtain must be fully open. The optical viewfinder becomes useless and the only way to see anything is by looking at the rear LCD screen. Auto Focus is no longer done with Phase Detection sensors below the mirror and now used Contrast Detection Auto Focus is used by reading the focus right off the image sensor. This type of AF is slower than PD AF.
The difference in sound is only because the mirror is already flipped up as soon as you press the LiveView button and all you hear is the sound of the shutter curtain clsoing and then opening up again so you can once again see the image on the LCD screen . The actual shutter opening and closing speed is exactly the same.
Here is more info on how Phase Detection AF works:
Phase Detection AF
Here is the description of each number shown in the above illustration:
Ray of light
Main/Reflex Mirror
Secondary Mirror, also known as “Sub-Mirror”
Camera Shutter and Image Sensor
Eccentric pin (1.5mm hex) for adjusting the Main Mirror
Eccentric pin (1.5mm hex) for adjusting the Secondary Mirror
Phase Detect Sensor (AF Sensor)
Pentaprism
Viewfinder
Mike Sowsun
S110, SL1, 5D Mk III -
Icon in header coloumn only displayed when not bound to context
Hi
I face a pretty strange behaviour in my application. I have atable with some columns.
I want the header with an icon behind the text. usually that is no big deal. Alas the icon wll not be displayed when I bind the columns textview to the context. when I hard-code some entry to the "text" property the icon is shown.
I tried it on several columns, copied the columns and just switched the text property, its always the same behaviour...
2004 SP19
StefanOk,
It finally works, it's always good to get a break when you're stuck..
I deleted the tablesorter class and used to "offixial" one from the tutorial. then the icons were displayed after th efirst time it was sorted.
As you can read in thread Re: Webdynpro Table: Column Header sort icon not visible
that happened to others to.
I just added one method to the tablesorter class...
public void sort(IWDNode dataSource, String columnId)
and called that upon table data context binding, so that initialy the table is sorted and also the icon appears on the initially sorted
regards
stefan -
Images are not displaying properly i.e Broken
images are not displaying properly i.e Broken .they are not opening in any website even in facebook
Hi Himanshu,
Tools>Internet Options>Advanced tab, click the "Reset" button.
Close all open IE windows and then start IE and try again.
Post consumer questions about IE to http://answers.microsoft.com (Help>Online Support menu from IE.)... at the answers forum you have to select what version of windows and IE you are using with your question...
which you did not stipulate here.
You can also choose at answers your preferred language and receive an answer in your preferred language.
Also include with your questions to answers, the FULL address of any websites you are having problems with... so that the support engineers can visit and test the web page...
Just saying Facebook is not sufficient as when you say 'pictures' are not displaying...perhaps you mean 'video' pictures... also websites like Facebook have different addresses for different parts of the world.
eg. http://facebook.com.au/ or http://youtube.com.au/nasa
This forum is for questions from System Administrators who manage 100's of computers that use IE with IEAK and GPO.
Regards.
Rob^_^ -
Why I can not change the display when I turn the Ipad from horizontal to vertical position ?
Please help to give me the guide line to solve the problem in my Ipad
I can not change the display when I move the ipad from horizontal position to vertical positionHave you got a lock symbol at the top of the screen next to the battery indicator ? If so, then depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can lock rotation either by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
If there is no lock symbol then try a reset and see if rotates after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Maybe you are looking for
-
How do i contact apple to make a complaint
Im currently travelling around australia but im from the uk..i have only been in australia for 3 days and my phone has stopped working, it would not turn on. I ook it into an apple store in bondi, i had to wait 2 hours for an appointment, at the appo
-
My CS 3.0.1 will not open InDesign files created in 2008. It says a plug-in may be missing. I did have a computer crash since I last opened it. I've tried changing the extension to inx, but that doesn't work. I cannot get the file to open. Can s
-
Ever since I updated the operating system, itune doesn't play music on iphone 4. If it plays, it plays only one song and gets stuck. I've tried to reconnect to the computer to see whethere there has been missing portion during the upgrade... but not
-
Hi, what is Account assignment category. what is it's purpose. what it controls and where are it's config settings. for instance account assignment category is a cost centre or a sales order. what it means and what it controls as far as a sales order
-
How to get back sample application after deletion
Hi All, I have deleted Sample Application provided in HTMLDB 1.6 by default.So how can i get back those application.I have neither exported the application before.So is there any way to recover that? Thanks in Advance, Cheers,