[3003 + R3299 + RSM340] error messages loading an ODS

Hello everybody,
I'm trying to load an ODS which normally is been loaded w/o any issues via a full InfoPackage
I've tried by using the previously created infopackages and the same errors were raised, I tried to create a new IP with the same features...
Update Mode     Full update
Filter: 0STAT_DATE     From 20110305     to 20110314
Processing     PSA and then into Data Targets (Package by package)
and system is retrieving the following errors:
Message no. R3003 ("Error                                                   7 when sending an IDoc")
Message no. R3299 ("Exception condition "NOT_EXIST" raised.")
Message no. R3299 ("Exception condition "NOT_EXIST" raised.    3")
Message no. RSM340 ("Errors in source system")
Additional comments:
I checked IDocs, tRFCs and there´s nothing wrong.
Loads are from BW to BW.
An additional thing I realized is that the extraction is performed ok (records are extracted and passed ok), then a request is added into the ODS requests and keeps hung in yellow state never ending.
I had previously deleted bad entries on PSA, and even checked via RSRV the ODSs analysis and repair options but nothing was found.
I don't think it is because of authorization issues.
I hope you can help. With best regards,
Bernardo

Nevermind, I fixed it by applying the OSS note [Note 1229437 - 70SP19: DM pointer calculated incorrectly|https://service.sap.com/sap/support/notes/1229437] suggestion for the case #3.
I hope this is useful for each one of you who experience the same.
Regards,
Bernardo

Similar Messages

  • 8500 Pro-Error Message "Load Paper in device"

    I am receiving error message  "Load Paper in device" when both trays have paper. I have checked paper location in trays and appears to be OK, and have taken tray out and reset in printer. Has been printing fine up to this point.

    Hi,
    As the issue occours with a specific document only, make sure to verify that any of the document settings are set correctly
    (e.g. the right paper size, the page margins, etc...)
    Additionaly, try copying the entire content of the document and paste into a new blank document, try printing the new document and check for any change.
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Error message while activating ODS ZFI_ORD( FI Order Details)

    hi ,
    I am getting this error message while activating  the ODS ZFI_ORD( FI Order Details) "Value '1 - Hide = 2 Neck' (hex. '2000200020002000310020002D002000480069006400650020') of characteristic ZORD_DESC contains invalid characters
    " . I am not able to get in which record the problem is and the message is not clear for records. How to check it.
    Thanks,
    Pooja

    Hi
    Try to see the Errorred Records At PSA itself. The Object ZORD_DESC can be cheched for values.
    Data Target Request can be Deleted by making it Red. Edit at PSA
    /people/sankar.kumar/blog/2006/10/11/loading-text-filestxt-into-bw-with-hex-option
    RSKC --> type ALL_CAPITAL --> F8 (Execute)
    OR
    Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
    Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
    Refer
    /people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
    /people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
    /people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
    http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
    For adding Other characters
    OSS note #173241 u2013 "Allowed characters in the BW System"
    Sample cleansing routine (#)
    Help loading  char EQUIP#1111#TAG#3311  SN#A01040          *     into Cube
    Hope it helps and clear

  • Error message loading XL Reporter in 2007

    Hi Experts,
    My client has an issue when loading XLR.  When loading the system freezes for a while and later gives the error message:
    Unable to connect to XL Reporter.
    Error!  User authentication failed!
    Cause: Invaild use of Null
    This is a new issue to me, and none of the Notes I can find exactly macth the error message.  Any suggestions?
    This is happening on all 10 client PCs
    Thanks
    Greig

    Hi Greig,
    Check the following thread
    Unable to connect to XL Reporter
    XL Reporter Installation - Error executing IXMetaProcs.sql
    help to resolve Unable to connect to XL reporter user authentication
    *Close the thread if issue solved.
    Regards
    Jambulingam.P

  • Error when loading from ODS to Cube

    Hello Friends,
    I am having trouble loading data from ODS to Infocube in my 2004S system.When loading data i get this message
    07/03/2007     13:10:25     Data target 'ODSXYZ ' removed from list of loadable targets; not loadable.
    07/03/2007     13:28:42     Data target 'ODSXYZ ' is not active or is incorrect; no loading allowed     
    I checked for ODSXYZ in my data target but there is nothing by that name.Even the infopackage doesnt have it.What needs to be done.Please help.
    Thanks.

    Its a expected behavior. When you migrate ur DS, the infopacks associated with it, will grey out all the data targets that they were feeding before, that applies to any infopack you create even after the migration. You womt be able to delete it.
    Having said this, this shouldnt impact ur loads from ODS to Cube. As this shoudl be taken care of by ur DTP's rather than ur infopacks.
    A few questions:
    How are you loading ur cube?
    Did the data get thru fine to PSA with the infopack in question?
    How did you load ur DSO(assuming the load was successful)?
    Message was edited by:
            voodi

  • Error message loading XLR add-on

    Hi Experts,
    On loading SAP, we are getting the following error message:
    Unable to connect to XL Reporter
    Error! Server communication failed!
    Cause: Error! Unable to get document!
    Type: 36
    Cause: Application-defined or object-defined error
    SAP is reporting that XLR connected OK on the status bar but no reports are available.  Please help!
    Greig

    Hello grieg pls
    follow below procedure
    start->my computer>cdrive>program files >sap>sap business one> remove these two files 1).AddOnsInstall.sbo and 2).AddOnsLocalRegistration.sbo and clear all ur %temp%Files,prefetch,recent files and restart and open sap then u will get connected to xl reporter add on. and u will not get any errors and see that ms office 2003 is installed
    regards
    Jenny

  • Javascript error message loading dreamweaver mx

    this may be two different questions but here goes:
    -- i downloaded the interakt kollection a while back and just
    got time to use it. by now i noticed that a newer version was
    available so i downloaded it. but it crashed my machine trying to
    update. and an error message now comes up about a javascript error
    trying to load one of the interakt files. i put the system back 24
    hours but the same error comes up. i click okay and dreamweaver mx
    continues, but what does it mean?
    -- i'm just starting php programming and perform the simplest
    function, saving a .php site in apache2\htdocs and a file within
    the site. but when i try to run the php from the livedata view, i
    get a http 404 message about the doc not found. no wonder: the doc
    is not the one i saved, but has a longer file name. tried this a
    couple of times with different file names and the same thing
    happens. suggestions please.
    thanks,
    michael

    Michael
    You may need to uninstall and then reinstall DW &
    Interakt. The issue that
    you are probably running into is that Interakt changed some
    of the DW files
    which worked until the DW 8.02 update came out, and rewrote
    those files. The
    Interakt updater probably relies on finding the updated DW
    files.
    When you preview a file DW creates a temporary version of it,
    and runs that,
    and then deletes it. You can not reference these temporary
    versions in any
    other way.
    Paul Whitham
    Certified Dreamweaver MX2004 Professional
    Adobe Community Expert - Dreamweaver
    Valleybiz Internet Design
    www.valleybiz.net
    "hconnorjr" <[email protected]> wrote in
    message
    news:ef9hkr$5ac$[email protected]..
    > this may be two different questions but here goes:
    >
    > -- i downloaded the interakt kollection a while back and
    just got time to
    > use
    > it. by now i noticed that a newer version was available
    so i downloaded
    > it. but
    > it crashed my machine trying to update. and an error
    message now comes up
    > about
    > a javascript error trying to load one of the interakt
    files. i put the
    > system
    > back 24 hours but the same error comes up. i click okay
    and dreamweaver mx
    > continues, but what does it mean?
    >
    > -- i'm just starting php programming and perform the
    simplest function,
    > saving
    > a .php site in apache2\htdocs and a file within the
    site. but when i try
    > to run
    > the php from the livedata view, i get a http 404 message
    about the doc not
    > found. no wonder: the doc is not the one i saved, but
    has a longer file
    > name.
    > tried this a couple of times with different file names
    and the same thing
    > happens. suggestions please.
    >
    > thanks,
    >
    > michael
    >
    >

  • Error message loading Topaz plug-in

    Using plug-in manager, I get an error message when trying to load the plug-in. What next?

    garlam72 wrote:
    What next?
    Tell us what the error message is?
    And the plugin, and the Lr version.
    Note that as far as I'm aware, Topaz plugins need to be accessed in Lr via their "Fusion Express" program - Topaz apps are not "Lightroom plugins" per se.

  • Error message Load paper in printer when I print a certain word document

    HP Officejet Pro 8500A on Windows Vista-32 bit
    Printer works great apart from when I try and print one word document or any other word document based on it
    I press print,printer tells me it's printing then I get the error message. "load paper in printer" when there is plenty of paer in it
    Other word documents and previous printer was OK
    Thanks

    Hi,
    As the issue occours with a specific document only, make sure to verify that any of the document settings are set correctly
    (e.g. the right paper size, the page margins, etc...)
    Additionaly, try copying the entire content of the document and paste into a new blank document, try printing the new document and check for any change.
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Error message loading Historical reporting

    I am getting an error message on a few PCs.  It is unrelated to the user because this user is able to view reports on other PCs.  Attached is the error I am receiving. I have tried installing/uninstalling.  We have also made sure the user logged into the PC has admin rights.
    After clicking ok, i then get this error message also. 

    For the error 5022, assuming you are running CCX version 8 or above.
    Here are some troubleshooting steps:
    Go to:
    “C:\Program Files(x86)\Cisco UCCX Historical Reports” make sure to install the Drivers folder is created and has files in all the sub folders.
    If there is no drivers folder/(files in the sub folders) install the following:
    “C:\Program Files(x86)\InformixMSI\ibm informix client-sdk.exe” (If you are unable to install this with admin rights and getting error for IS kernel go to Control Panel\User Accounts and Family Safety\User Accounts->change user account control settings-> and select never notify, restart machine and then try installation.
    Let me know if you get 5022 even after that.
    If you are running CCX v7.0 let me know.

  • Error while loading from ODS to CUBE

    Hi guys,
    I am loading data from source system to ODS and from ODS to CUBE. Ok. The data came successfully from Source System to ODS. But while coming to ODS to CUBE it is showing some error at Data Packet 13. Ok. In CUBE, I loaded the data by using “update ODS data to data target”, at that time it shows two options like FULL UPDATE and INIT UPDATE. Then I selected FULL UPDATE and then I checked in “processing” tab there is only one option enabled i.e. only data target. OK and then I loaded it. Now after getting the error where I can correct it. There is no PSA option in monitoring.
             Other wise how I can change option in Processing tab of infopackage for PSA. But I know one point that when we load the data from one target to another the only one option available in processing tab is “only data target”. How can I change that option and how can I correct the error.
    Thanks
    Rajesh

    Hi,
    i solved my question like the following.
    Go to monitoring of the CUBE and select the option "read every thing as manually" -> then it shows another screen for correcting the records -> correct all the records and load the data again. ok
    Thanks
    Rajesh

  • Error message: Loading odsam failed!

    Pulling my hair out on this one.
    Have a Tiger 10.4.11 server that I want to share files out via samba to some windows machines. The Mac systems on the network have no problem accessing the shares via afp, but neither the Mac or windows machines can access the shares via samba.
    Here's a bit from the samba log file (log.smbd):
    [2007/12/12 14:54:56, 2, pid=11399] /SourceCache/samba/samba-100.9/samba/source/passdb/pdbinterface.c:make_pdb_methodsname(654)
    No builtin backend found, trying to load plugin
    [2007/12/12 14:54:56, 0, pid=11399] /SourceCache/samba/samba-100.9/samba/source/passdb/pdbinterface.c:make_pdb_methodsname(664)
    No builtin nor plugin backend for odsam found
    [2007/12/12 14:54:56, 1, pid=11399] /SourceCache/samba/samba-100.9/samba/source/passdb/pdbinterface.c:make_pdb_contextlist(765)
    Loading odsam failed!
    It appears I have a problem with the pdb_odsam plugin not loading, but I have no clue how to fix this and can find no other posts on Google or anywhere else of users having this problem.
    All I have found even discussing the plugin is this post http://developer.apple.com/documentation/Darwin/Reference/ManPages/man8/pdb_odsa m.8.html
    Can somebody please help me figure out how to get this plugin to work?
    Thanks.

    I'm not sure which permission you are referring to. Do you mean file permissions or user account permissions such as admin?
    I read the the post you referred to and it does not apply. We are not running an AD environment.
    I just don't understand why the plugin is not loading or how to repair it.

  • Getting an error message loading KoC---dependency prototype.js error

    downloaded 3 powertool add-ons off koc-cheats.com/getting_started/......and now I have issues with the game......it logs me off and is constantly flashing.....I have tried three times to re download greasemonkey and I still have the same issue......is there a java program I am missing?

    the update to greasemonkey broke the addin for the admin toolbox
    you can get the old version of greasemonkey at http://download.cnet.com/Greasemonkey/3000-11745_4-10382405.html
    uninstall your version 9 and install the old version

  • How to fix "load correct tray A4" error message?

    I have Bonjour on two PCs (one Windows XP Professional, one Vista) networked to a new Mac Mini (Lion OS) with Canon MF4270 printer attached to USB port. Pages print from the Mac with no problem, but when I print from either PC the job prints the first page but then beeps and shows an error message: "load correct paper cassette A4" even though the default paper setting is letter. Any idea how I fix this?
    Neil

    Try uninstalling your MobileMe control panel.

  • Error while loading to active data table in DSO

    Hi,
    please help me in resolving the issue with active data table . when i am activating the new data table the job gets cancelled with message as 'Error when assigning SID: Action VAL_SID_CONVERT table OCALMONTH'.
    Thanks and Regards,
    Prasad.

    Hi,
    In the displaying error message tab of ODS activation, you will get error message and invalid value for the 0CALMONTH will be displayed. Search the NEW TABLE of ODS with the same value, identify the error records.
    If you have PSA in the flow, delete (w/o making the status RED), correct data in PSA and reconstruct the data.
    If you don't have PSA, you have to delete by making red, reload through PSA correcting the erroneous data in PSA.
    Regards
    Chandu

Maybe you are looking for