300GB Harddrive trying to format. For Mac & PC

300GB Harddrive trying to format.
Hello,
I recently purchased a 300GB Seagate 7200RPG Harddrive that was put in my USB 2 External Case.
I've tried to format using the MS-DOS option in Panther v10.4.6
However it didn't seam to work. After three hours I disconnected the drive.
It appears that nothing was formatted.
I attempted to format the drive in two partitions in windows XP (NTFS)
150GB each and that worked. It took a while about 50min /per partition.
Can anyone tell me what I'm doing wrong?
I would like to have this drive with two partitions
One for Mac at 150GB
One for PC at 150GB
All my updates are current on the OS.
Thanks,
Dragan

PC User,
Welcome to the Apple Discussions!
Unfortunately I'm not aware of any utility that can actually format part of a drive as say HFS+ and part as NTFS. Essentially, the problem is that at the firmware level, a Mac or PC is going to look at the first sectors on the drive to determine the format, and that format holds throughout the entire drive regardless of how many partitions are created.
Doesn't MS-DOS have something like a 250 MB size limit?
If you format the drive as NTFS, you'll find the Mac can read the partitions but can't write to them. Both Windows and Macs can read and write FAT32 formatted disks, but that has a partition size limit of 32 GB.
What I ended up doing with a LaCie triple drive used work archival backups (backup and disconnect / store the drive separaately from the computers) of a home eMac and home PC was to format the drive on the Mac af HFS+ with three partitions (for the Mac, one for the PC, and a separate one for iTunes Music libraries). I installed MacDrive on the PC to allow it to read and write the HFS+ formatted drive. Macdrive is US$50 shareware, not cheap, but it works.

Similar Messages

  • Hi.have a g5 mac,dual core 2.3 unit.i bought it with no hard drive.have got hard drive,formatted for mac.i am trying to load osx.i get a grey screen with a small box in the centre with 2 character faces,and then grey apple with loading icon spinning.help?

    hi.have a g5 mac,dual core 2.3 unit.i bought it with no hard drive.have got hard drive,formatted for mac.i am trying to load osx.i get a grey screen with a small box in the centre with 2 character faces,and then grey apple with loading icon spinning.nothing is loading tho.

    I see 10.6.3 in your profile---is tthat what you are trying to load? If so, it won't work. No PowerPC Mac like your G5 can run a Mac OS version higher than 10.5.8

  • Have airport extreme, square model, have a external harddrive to use as back up(formated for mac)hooked it up to the usb port in back. can't find it on my computer. what am i doing wrong

    have the airport extreme, square model. have a external harddrive formated for mac hooked up to the usb port in back.
    i can't find the harddrive on the computer for back up in timemachine. what am i doing wrong?

    First, if you are not aware, you need to know that Apple does not officially support Time Machine backups to a drive at the USB port of the AirPort Extreme.
    That may be part of the problem here, so if you want to continue to try this, you need to understand that there are no guarantees of success.
    Some users do seem to be able to make this work, but most have some problems and some....like me....have nothing but problems when they try this.
    If you want to continue to try this, the first thing to verify is that the drive is formatted specifically in Mac OS Extended (Journaled). Have you verified that the drive is formatted correctly by connecting it directly to your Mac and using Disk Utility to check?
    Some drives that are advertised as being "compatible for Mac" are not formatted correctly in Mac OS Extended (Journaled). Time Machine has no chance of success unless the drive is first formatted correctly.
    I would also ask that you consider leaving the drive connected to your Mac for Time Machine backups. That will be supported, and is a far more reliable way to keep backups if your data is important to you.
    Next, we need to know what operating system you are running on your Mac. If you do not know, click the Apple icon in the upper left corner of the screen and then click About This Mac.  Post back with the OS X Version number that you see there.

  • Can an iPod formatted for Macs play on Windows iTunes?

    I have an iPod formatted for a Mac but have to use a Windows computer at work. Is there a way to play my iPod through the Windows iTunes player? I tried plugging it int through a USB adaptor, but my computer doesn't trecognize my iPod.
    Thanks!

    If your iPod is formatted for Mac it won't run natively on a PC because Windows operating systems don't recognize Mac OS-formatted disks (HFS or HFS Plus formats). There are third party programs that will allow you to use a Mac formatted iPod on Windows. XPlay for instance gets good reviews, you can find it at this link: XPlay 2
    XPlay is currently only compatible with Windows XP, 2000, Me or 98SE, a new version for Vista is planned for release later this year.

  • External Hard Drive Formatted For Mac

    Hello,
    Can some one please point to a link to an external hard drive that comes formatted for Mac out of the box? My 90 year old mother-in-law needs a time machine backup and would freak out if I tried to guide her through Disk Utility to reformat the external drive she just bought from Radio Shack. So an out-of-the-box plug-n-play drive would work best for her.
    Does anyone know of any? I know LaCie is/was Mac focused, but I need to have a drive that is ABSOLUTELY Mac plug-n-play when it gets delivered to her house.
    Thanks!

    Do you Skype with her? Seems like you could just do a Skype call and share her screen so you can literally tell her to click this, click that. I've done exactly this with my mother across the Atlantic to solve a different problem. If she's capable of plugging the new drive into the Mac (which it sounds like you intend her to do anyway), I'd have to believe she'll be able to follow your instructions if you can tell her which options to click. Formatting a drive is relatively few clicks. And, I think this wouldn't be any harder than figuring out how to setup Time Machine...
    https://support.skype.com/en/faq/FA10022/how-do-i-share-my-screen-in-skype-for-m ac-os-x

  • Since I upgraded to 10.9.5, my macbook no longer recognizes my external  hard drive. How do I fix this?  External hard drive is a 1TB Toshiba formatted for mac.  Worked fine until latest upgrade.

    Since I upgraded to 10.9.5, my macbook no longer recognizes my external  hard drive. How do I fix this?  External hard drive is a 1TB Toshiba formatted for mac.  Worked fine until latest upgrade.

    Solved the problem by dumping my external HD onto another computer. Re-formatting and re-installing the data.  Not what I wanted to do but it solved the problem.

  • IPod is formatted for windows but i need it formatted for mac

    i just got my iPod a couple days ago used from best buy and hooked it up from my mac not aware that it was formatted for windows. when i try to restore my iPod it just freezes up my computer. do i really need it formatted for mac in order to get good performance?

    Right. If you restored it in Windows the iPod will still be formatted for Windows.
    Now see if you can restore it on your mac.
    Also, know that Windows-formatted iPods work fine in Mac OS X. The only "problem" is that you cannot update the iPod's software on your mac if another software version is released. You would have to do that through Windows.
    If you plan on using your iPod with both Operating Systems, you may want to keep it formatted for Windows.
    btabz

  • Will files saved on an external HD, formatted for Mac, be readable on a Windows machine?

    Will files saved on an external HD, formatted for Mac, be readable on a Windows machine?

    Only if the Windows computer has software such as MacDrive installed or the drive is hooked up to a Mac or AirPort Extreme and shared over a network.
    (60143)

  • External drive is suddenly read-only, yet is formatted for Mac

    I've had a 1TB external hard drive for the last year and never had a problem with it until now. Suddenly, it is showing as read-only, however, it's formatted for Mac. How am I able to fix this? Do I have to re-format it?

    Usually that means the drive is malfunctioning. Back up all data on it, if you haven't already done so, then erase and restore. If you ever have another problem with the drive, replace it.

  • HT1481 If my I Pod is formatted for Mac, How do I make is windows freindely?

    My Ipod is formatted for mac. I have windows 7 please help.

    This is the iPod shuffle category, but if this is about an iPod classic, it will need to be "reformatted" for Windows, using the Restore process in iTunes.  This will erase (reformat) the iPod, re-install its software, and set it to default settings. 
    iTunes needs to be installed on the computer.
    http://www.apple.com/itunes/
    When you initially connect the iPod to that Windows PC, iTunes should prompt you to do a Restore.
    (If this is actually about an iPod shuffle, please post back.)

  • Using IMOVIE '08 to import from DV camera to 'BUSLINK' external hard drive( formatted for MAC ) but no success and kept getting this message: The import was canceled. You may not have permission to write to /Volumes/BUSLINK/iMovie Events.localized. Thanx

    Using IMOVIE '08 to import from DV camera to 'BUSLINK' external hard drive( formatted for MAC ) but no success and kept getting this message: The import was canceled. You may not have permission to write to /Volumes/BUSLINK/iMovie Events.localized. Thanx in advance!

    I finally got a representative that was able to help me, she had me go to Get Info, by right clicking iMovie from the finder, and I had to click on Sharing & Permissions>Everyone>Read & Write

  • I'm actually trying to watch some of apples clips for the ipad .... i keep gettin a " missing plug in " message ....i've tried update flip for mac , also adobe flash  etc .... nothing seems to work .... any comments ... advise ...considerations ???

    I'm actually trying to watch some of apples clips for the ipad .... i keep gettin a " missing plug in " message ....i've tried update flip for mac , also adobe flash  etc .... nothing seems to work .... any comments ... advise ...considerations ???

    Flash Player Protected Mode provides a modern, sophisticated set of security protections that we see as critical in today's security landscape. 
    We highly recommend that users not disable ProtectedMode.  Also, it's worth noting that by manually changing your mms.cfg, you have opted out of Protected Mode for all future versions of Flash Player, as we will continue to honor that preference. This puts your system at risk, and that risk will continue to grow over time. 
    Ultimately, this is an issue with the RealPlayer Browser Record plug-in.  There is a more technical explanation in the Mozilla bug referenced above in the thread, but the simplified version is that the security enhancements designed to prevent the introduction of malware via Flash Player make RealPlayer Browser Record plug-in no longer compatible with Flash Player for Firefox.  You can disable the record functionality to eliminate this issue, while retaining the ability to view both Flash and Real Player content.
    To disable the Real Player Browser Record functionality while maintaining the enhanced security provided by Flash Player with Protected Mode, do the following:
        Launch RealPlayer
        Click the RealPlayer icon in the upper-left corner of the window, and choose Preferences
        Choose Download & Recording from the left-hand menu
        Uncheck "Enable Web Download & Recording for these installed browser"
        Click OK

  • My Ipod is formatted for Mac, but I need to download audiobook from Windows

    My Ipod is formatted for my Mac, and my entire library is in it. However, I need to download a audiobook from my library , and when I connect my Ipod to my Windows PC, it is telling me that I need to restore it , which means that I will
    loose what I already have on it.
    Help
      Mac OS X (10.4.9)  

    If your iPod is formatted for Mac it won't run natively on a PC because the Windows OS does not support the HFS Plus file system and therefore will not see the drive. There are third party programs that will allow you to use a Mac formatted iPod on Windows. XPlay and MacDrive for instance get good reviews. XPlay is an iPod specific program, MacDrive is more general and lets you access various types of Mac formatted drives on Windows such as CDs, DVDs, hard drives etc:
    XPlay 2
    MacDrive
    You can read another user's experience of using XPlay at this link: iPod on Mac and Windows

  • Formatted for mac; Connect to PC?

    My iPod touch is formatted for mac. Can I safely connect it to a PC and sync from the iTunes on that PC?

    Only PC formatted iPods can be dumped music from a PC.
    As PC formatted iPod can be synced with both an Mac and a PC, your best bet is to move its contents to your mac with an iPod to Mac software.
    Format your iPod to PC.
    Put the music back to it from your Mac.
    Transfer that music from your iPod to the PC.
    Synchronize it with the PC.

  • Received ipod shuffle as gift formatted for Mac.  I need to reformat for pc

    I received an ipod shuffle as a gift. It was already formatted for a Mac. However, I have my own itunes library on my Windows PC. I want to reformat the ipod for the pc, but am having trouble doing that. Can anyone tell me exactly what I need to do?
    THanks!

    The ipod I received was already formatted on a mac
    and filled with songs from the gift givers itunes
    library. I don't want it that way. I want to
    reformat it for the pc and put my songs on it. I
    have tried to restore, resynch, etc, but it is not
    working, because it is formatted for the mac. All I
    want to know is how to format for the pc (and start
    over). I saw a post from an earlier discussion that
    said that I could choose the device on My Computer
    and right click and say format, but right clicking on
    the device does not give me format as an option. Any
    ideas?
    Try this: http://www.apple.com/support/downloads/ipodresetutility10forwindows.html

Maybe you are looking for

  • Appraisals Tcode APPSEARCH BADI HRHAP00_REPORTING

    Hi I want to add Additional Data to the ALV grids shown when I evaluate appraisals . I find it looks possible by using a BADI HRHAP00_REPORTING thru which this can be done Unfortunately I am not able to make it work.OR find more information about thi

  • Sapscript Syntax to write a RFID Tag on a label with Printronix SL5000r

    Hello everybody, does anyone know the syntax in SAPscript, to write data on a RFID Label with the label printer SL5000r from Printronix. I know you need the command "RFWTAG". But do you also need a special font? It would be great, if someone could po

  • RPM / Frequency Color Plot best strategy

    Hello, I'm trying to do some Order Spectra Analysis and I'm receiving an Out of Memory error once I'm trying to plot an RPM-Frequency colormap. I'm not sure I'm doing the right thing that is why I need some help from you. The data I'm trying to ana

  • How can I remove the 1 million emitter limit for trapcode particular?

    Hello everyone, I've recently started playing with trapcode particular v2.2 and can't seem to rise above a problem. My PC setup is: i7 965x,  gigabyte ga-ex58-ud3r, ati firegl v8600, 16 GB DDR3 2133Mhz Kingston Beast, 2x1TB WD. I want to use more tha

  • Designing run time jsp page

    hello all, I want to design a run time jsp page. how should i do it? using servlet or jsp has this capablity. please give me advice to achieve it effectivly. Can yo give me a example also of making runtime controls let say a button or label or textbo