300Gb SAS disk support for Sun Fire V445

Hi,
Can anyone tell me if 300Gb 10K SAS disks are compatible and supported by Oracle for Sun Fire V445's? The disks I have in mind are Sun FRU PN: 540-7869-01.
Any help will be greatly appreciated.
Thanks
Richard

Thanks for your post.
I am finding Oracle's approach to hardware very frustrating. Their ultra conservative approach seems to be motivated by a desire to driving customers to newer, more expensive systems. Can't fit you data on 16 300GB SAS drives in a x4250 that cost $20K - why you can buy a new pillar system for $121,000! Never mind one aught to be able to use 1TB drives.
And the cost of SUN's drives! I mean its not like they actually make them. No, they take Seagate drives, put them in a fancy bracket and charge 10x more!
I am really wondering how much longer I will stay with Oracle! I mean my PC can hold more data than my x4250 that cost 15x more! And Linux may soon have the ZFS capability. So why Oracle?

Similar Messages

Oracle VM Server 2.0 for Sun Fire v240?

Hi all,
I am searching and trying all day long to install Oracle VM Server on SPARC 64 Sun Fire v240.
I still can not find information is it supported or not?
I have Oracle Solaris 10 5.10 Generic_142909-17 sun4u sparc
the CPUs are UltraSPARC-IIIi (portid 0 impl 0x16 ver 0x34 clock 1503 MHz).
I installed OVM_Server_SPARC-2_0 from https://edelivery.oracle.com/
Anyway the command ldmconfig returns that This is not supported by my platform!
In the release notes of Logical Domain Manager 1.2, 1.3 and VM Server 2.0 is written the supported hardware and I can not see the v240, but I see
Supported Platforms:
Sun Fire and SPARC Enterprise T1000 Servers
Sun Fire and SPARC Enterprise T2000 Servers
Probably this sun fire is not Sun fire v240 but it is sun fire t1000?!
What do you think - is my server supported for any of these versions? Is virtualization possible?
Also I can not download version 1.3 because it's moved to oracle my support section but it was free?
Need your help and support :)
Thanks a lot.

A T1000 servers does not show V240.
uname -a on T1000 output below
bash-3.00# uname -a
SunOS xxxx 5.10 Generic_142909-17 sun4v sparc SUNW,SPARC-Enterprise-T1000
Thanks,
Sudhir

ISO image for Sun Fire v60x diagnostics CD

The only thread I can find on this diagnostic CD is from 2006:
Re: ISO image for Sun Fire v65x diagnostics CD...
The link posted in the forum:
"Sun Fire(tm) V60x, V65x Diagnostic CD 4.0
This distribution offers the Diagnostic CD image (Sun Fire(tm) V60x, V65x Diagnostic CD Release 4.0) supporting Sun Fire V60z and V65z products.
http://www.sun.com/download/products.xml?id=441f6709" (The download link on the page does not work).
Does not work due to the shift from Sun to Oracle.
Can anyone point me in the right direction for the file? I've been searching for months.
Thank you.
Edited by: user13455836 on Mar 21, 2011 12:46 PM

Hello,
it should be possible to locate these files via the migrated (Sun) System Handbook.
This is a blog entry about the new location of the System Handbook (review the 3rd comment)
http://blogs.sun.com/patch/entry/goodbye_sunsolve_helloooo_mos
Maybe the user Nik (http://forums.oracle.com/forums/profile.jspa?userID=826741) can help to locate the download. He is very active on these forums and an Oracle employee.
I don't have a MOS account, otherwise I would have been able to confirm if this download is still available. I guess due to the fact that Oracle contracts are more "fine grained", it's possible that downloads only for the systems covered by your service contract are visible.
Michael

Perfomance issue between Sun-Fire-V445 & SUNW,T5240

my application owners is complaining abt the perfomance issue with between V445 and T5240
5.10 Generic_118833-33 sun4u sparc SUNW,Sun-Fire-V445
bash-3.00$ psrinfo
0 on-line since 01/10/2009 01:55:45
1 on-line since 01/10/2009 01:55:45
2 on-line since 01/10/2009 01:55:45
3 on-line since 01/10/2009 01:55:42
bash-3.00$ top
load averages: 0.96, 1.11, 1.14; up 101+15:04:35 16:59:45
237 processes: 231 sleeping, 5 zombie, 1 on cpu
CPU states: % idle, % user, % kernel, % iowait, % swap
Memory: 32G phys mem, 21G free mem, 2052M swap, 2052M free swap
but t5240 is having 128 processor and
load averages: 0.56, 0.33, 0.27 tbw1.prod1.idc1.level3.com 17:01:53
58 processes: 57 sleeping, 1 on cpu
CPU states: % idle, % user, % kernel, % iowait, % swap
Memory: 128G real, 57.0G free, 697M swap in use, 51.7G swap free
both the application are on zones. But the processing time for the app is less in v445 when compared to t5240

System Configuration: Sun Microsystems sun4u Sun Fire V445
System clock frequency: 199 MHZ
Memory size: 32GB
==================================== CPUs ====================================
E$ CPU CPU
CPU Freq Size Implementation Mask Status Location
0 1592 MHz 1MB SUNW,UltraSPARC-IIIi 3.4 on-line MB/C0/P0
1 1592 MHz 1MB SUNW,UltraSPARC-IIIi 3.4 on-line MB/C1/P0
2 1592 MHz 1MB SUNW,UltraSPARC-IIIi 3.4 on-line MB/C2/P0
3 1592 MHz 1MB SUNW,UltraSPARC-IIIi 3.4 on-line MB/C3/P0
================================= IO Devices =================================
System Configuration: Sun Microsystems sun4v T5240
Memory size: 130848 Megabytes
================================ Virtual CPUs ================================
CPU ID Frequency Implementation Status
0 1165 MHz SUNW,UltraSPARC-T2+ on-line
1 1165 MHz SUNW,UltraSPARC-T2+ on-line
2 1165 MHz SUNW,UltraSPARC-T2+ on-line
3 1165 MHz SUNW,UltraSPARC-T2+ on-line
4 1165 MHz SUNW,UltraSPARC-T2+ on-line
5 1165 MHz SUNW,UltraSPARC-T2+ on-line
6 1165 MHz SUNW,UltraSPARC-T2+ on-line
7 1165 MHz SUNW,UltraSPARC-T2+ on-line
8 1165 MHz SUNW,UltraSPARC-T2+ on-line
9 1165 MHz SUNW,UltraSPARC-T2+ on-line
10 1165 MHz SUNW,UltraSPARC-T2+ on-line
11 1165 MHz SUNW,UltraSPARC-T2+ on-line
12 1165 MHz SUNW,UltraSPARC-T2+ on-line
13 1165 MHz SUNW,UltraSPARC-T2+ on-line
14 1165 MHz SUNW,UltraSPARC-T2+ on-line
15 1165 MHz SUNW,UltraSPARC-T2+ on-line
16 1165 MHz SUNW,UltraSPARC-T2+ on-line
17 1165 MHz SUNW,UltraSPARC-T2+ on-line
18 1165 MHz SUNW,UltraSPARC-T2+ on-line
19 1165 MHz SUNW,UltraSPARC-T2+ on-line
20 1165 MHz SUNW,UltraSPARC-T2+ on-line
21 1165 MHz SUNW,UltraSPARC-T2+ on-line
22 1165 MHz SUNW,UltraSPARC-T2+ on-line
:

Tools and Drivers for Sun Fire x2200 M2

Does any one have an extra Tools and Drivers Disc for a Sun Fire x2200 M2? Or have the ability to give me an iso for it.
Oracle has locked down the ability to download a copy unless your under support which I highly doubt is legal considering that you can't do several things without the disc.
Please help

No one is going to jeopardize their MOS credentials by giving to for free
what they had to pay money for. They would be subjecting themselves to possibly having all their service contract privileges cancelled by Oracle.

DVD Writer for Sun Fire V440

I was wondering if anyone had found a DVD writer that will work with the Sun Fire V440. I would like an internal drive if possible but an external device would also be acceptable.

Hello,
the V440 uses a slimline drive like these ones in notebooks.
Sun doesn't offer a slimline DVD writer (only full-height).
You might be tempted to install a slimline DVD writer for notebooks or server, but you have to keep two things in mind:
- Installing non-Sun or unsupported components voids your warranty/service contract.
- Slimline drives have no jumpers to select master/slave or cable-select . All drives use cable-select (or reverse cable-select). This setting is determined by the firmware of the drive.
If voiding the service contract or warranty doesn't bother you, get a drive from a dealer that is able to flash a new firmware to the drive or can sell a drive with the correct non-Sun firmware (and the correct setting cable-select or reverse cable-select).
Regarding the brands or types of DVD drives used by Sun, review the Sun System Handbook.
Using an external DVD writer in an USB enclosure might be possible, but the integrated USB controller (of the V440) is only USB 1.1 (supporting dual speeds of 12 and 1.5 Mbits/sec) which is insuficient for a DVD writer.
I would recommend that you browse the messages in the solarisx86 Yahoo group.
http://tech.groups.yahoo.com/group/solarisx86/messages
In this group you can find a lot of expertise. Send a single e-mail to one or two people (pointing out that your question isn't directly related to Solaris x86). Posting a message requires joining the group and please keep in mind that your off-topic question is sent to every subscriber of the maillist.
Michael

ISO image for Sun Fire v65x diagnostics CD...

I'm looking for an ISO image of the Sun Fire v65x diagnostics CD referred to in section 4.10 of the manual (817-2023-11.pdf). An ISO image is posted for the Sun Fire V20z / V40z. Will this work with the v65x even though it's an Intel vs. AMD system?

Hello,
is this what you are looking for ?
Sun Fire(tm) V60x, V65x Diagnostic CD 4.0
This distribution offers the Diagnostic CD image (Sun Fire(tm) V60x, V65x Diagnostic CD Release 4.0) supporting Sun Fire V60z and V65z products.
http://www.sun.com/download/products.xml?id=441f6709
Michael

Proper serial connections for Sun Fire v250

I recently purchased a (gently) used Sun Fire v250 for use as a workstation. The machine had a graphics card installed by a previous owner, but I accidentally reset the factory defaults on the SCC (I was having a boot problem, and apparently a brain problem).
My question is, how do I connect over serial to make the default boot up options 'screen' instead of 'ttya'? I know from the oracle docs that I need a specific type of serial cable, but I'm unsure where exactly I can go about finding this. Also, once I get the cable what software (for *NIX or windows) can I use to reset the SCC?
Thanks,
John Lambert
Dychron, Inc.

984429 wrote:
I recently purchased a (gently) used Sun Fire v250 for use as a workstation. The machine had a graphics card installed by a previous owner, but I accidentally reset the factory defaults on the SCC (I was having a boot problem, and apparently a brain problem).
My question is, how do I connect over serial to make the default boot up options 'screen' instead of 'ttya'? I know from the oracle docs that I need a specific type of serial cable, but I'm unsure where exactly I can go about finding this. Also, once I get the cable what software (for *NIX or windows) can I use to reset the SCC?
Thanks,
John Lambert
Dychron, Inc.Search for a cisco console cable .... this is a typically a 9 pin to RJ 45 ... usually less than say $10 on at least well known auction site.
If you laptop/desktop does not have a serial get a usb to serial converter as well.
If you have a linux desk OS then it is possible to connect to a serial connection ... from solaris you would use tip .... from linux typically use 'cu' (built it) ... if I remember correctly.
Or use recent versions of PuTTY from windows. ... which can also be configured for serial.

Looking for the right KVM drawer and switch for SUN Fire v240 and v880

Hi,
We have Sun Fire v240, v880, and four dell servers in a Shark Rack. The LCD monitor and keyboard drawer and the KVM switch were part of the original installation from Shark Rack. The switch and the monitor stop responding from time to time so I am looking for a replacement.
I am surprised that the prices for the KVM drawer are very different from different manufactures. I was just wondering whether I really need a SUN ready certified KVM drawer. If anyone has any experiences(good or bad) with getting a new KVM, please share it with me.
If the KMV drawer is compatible with SUN systems, do I need to install any patch on the system or it's simply plug and play?
Thanks!

For most SPARC based Sun Servers you do not need a KVM switch, but merely a terminal switch which you can attach to the console port of the Sun Server. There are plenty of Terminal Servers to choose from, the most recent i bought was a Cyclade, which works very well and allows you to ssh to a console..
.7/M.

For SUN FIRE

Hi,
I have a question.
We purchased a SUN FIRE 240, preinstalled with Solaris
10.
Can we install Solaris 2.6 in SUN FIRE 240?
Because our existing application is running with SUN
SPARC and Solaris 2.6.
SunOS scn5 5.6 Generic_105181-15 sun4u sparc
SUNW,UltraAX-MPSystem = SunOS
Node = scn5
Release = 5.6
KernelID = Generic_105181-15
Machine = sun4u
BusType = <unknown>
Serial = <unknown>
Users = <unknown>
OEM# = 0
Origin# = 1
NumCPU = 2
Thanks and regards,
Jo.

No, you can not use Solaris 2.6 on that system.
You must use Solaris 8 or newer, and even with Solaris 8 the oldest distribution that understands how to manipulate that UltraSPARC-IIIi hardware would be:
Solaris 8 HW 12/02
http://sunsolve.sun.com/handbook_pub/Systems/SunFireV240/Sun FireV240.html
Furthermore, I don't believe you could even boot the system to 32-bit mode, but will need to take advantage of the 32bit compatibility mode designed into Sol8, Sol9, and Sol-10. (nevermind how that would cripple the computer's performance abilities.)
If the application vendor cannot assure you that the program will function on newer OS's then I'd consider finding another vendor. Solaris 2.6 went EOL a <i>loooong</i> time ago.

Console not working for Sun Fire V40z

Hi All
We have a Sun Fire V40z remote console configured.I am able to see the console till i get the login screen of the OS. Once i get the login screen of the OS, console gets hung.Any body please let me know what is the problem
Thanks in advance
Kanki

Its Redhat Linux.and its not in graphical mode

Subversion support for Sun Studio 11 IDE

Hi there,
has anybody succeeded in using the Sun Studio 11 IDE with the Subversion SCM system? I searched the web for informations about this but didn't find anything.
Thanks for your help!
Jens Siebert

Jens,
The subversion module in netbeans is based on a current version
of netbeans (I'm not sure exactly which one). It very unlikely to work
with the Sun Studio 11 IDE because the Sun Studio 11 IDE is based
on a much older version of NetBeans (3.5.1 with modifications).
The next major release of Sun Studio should use the current
NetBeans release. It should work with the Subversion module.
Unfortunately, we won't be releasing for quite a while.
Gordon

Sun Fire X4100 - XP Installation

Hi -
Where can I get a copy of an SIA that will allow me to install Windows XP? If there is no SIA, is there a method to install XP onto this server?
Thanks!

Hi,
If you have a valid support coverage you can download Hardware Installation Assistant (previously called Sun Installation Assistant) from MyOracleSupport website 'Patches&Updates' tab.
The latest version of HIA for Sun Fire X4100 is 1.5.2 and the patch number is 10335353 (it's a zipped .iso file).
Cheers!

Sun Fire 1280 capacity planning

Hello, I'm doing capacity planning for Sun Fire 1280 hardware, and I need to clarify few black spots in my knowledge :-)
I'm not able to find any information on the bus speed (max transfert rate) for this specific hardware. Can anybody help on this?
Also, checking at the stats, I can see that the IO wait for CPU and disk is the same.
Can I safely assume that the bus is allowing a single "transaction" at the time (contention)? To be read: if the CPU is transferring data to the RAM, another simultanous operation (e.g. usb to scsi) is not possible.
Of course we're talking about micro seconds, but just to clarify.
Thanks in advance!

Hanoi,
The x4500 has numerous disks in it. Adding up the sizes of the disks yields 48TB of raw disk. If you were to format these disks and install an operating system, you'd still have around 48TB of disk.
However, you may want to create a RAID array with the disks, to either improve performance (by striping the data), or improve reliability (by adding metadata information that allows you to recover from a single or dual disk failure).
Typically, folks will use a RAID 5 level, which both stripes and creates a metadata reserve. With this level, you would subtract the size of 1 or more disks (depending on the protection level), as this would be a 'holdback' to contain the metadata.
Bottom line is that you should have much more than 30TB available if you use most RAID levels that do not include mirroring of disks (where each disk has another whole disk copying its data, reducing your usable capacity by half).

How Can I shutdown SUN FIRE 4800 Machine?

Dear IT Experts,
I maintain a SUN Server. It is SUN Fire F4800. To login , I must use HyperTerminal, serial cable , and Laptop.
I have a plan to shutdown this machine for about 30 minutes for hardware maintenance checking.
But, I can not shutdown it using command "power-off" at "OK" prompt.(before, I use "init 0" to "OK" prompt)
I got this message :
{13} ok power-off
ERROR: do_interpret: no such symbol "power-off"
ERROR: undefined word
Could any body tell me what step can I do to shutdown this machine properly,please?
Here is the machine description :
- F4800 Server Base � Factory Rack
- CPU / MEM BD BNDL � 2CPU @750/6GMEM
- Red. Kit for Sun Fire 4800
- PCI GIGABIT Ethernet 2.0 Card
- PCI I/O Assy for F4800-6800
- Media Tray HD2, DVD1, TP1
- OPT INT PCI 10/100 Base NIC
- Continental Europe PWR CRD KIT
- 15 m Fiber Cable (multi-mode) and connector
- JNI 64 Bit PCI adapter Non � OFC
- Sun Fire Cabinet
- Solaris 8 Std English - Only
- OPT PWR Cord for ENTERPR. (INT)
- SUN Trunking Software v 1.2.1
- WS SB_100PGX64 128/15GB/CDROM
- NORTHAMERICAN COUNTRY KIT
Please help this newbie person.
Thanks for any response
Regards,
Ferianto

Dear All,
Sorry, if I ask this question to this forum again. Yesterday, I tried to shutdown SUN Fire 4800 machine. It is the same machine which I asked to all of you before.
At "OK" prompt, I typed *#.* in order to go to SC (System Controller) to shutdown the Machine. (As I know that "OK" prompt just shutdown the OS level)
But, I got the Error message.. These are commands that I have typed, but still did not work
{12} ok ~#
ERROR: do_interpret: no such symbol "~#"
ERROR: undefined word
{12} ok ~.
ERROR: do_interpret: no such symbol "~."
ERROR: undefined word
{12} ok #.
ERROR: do_interpret: no such symbol "#."
ERROR: undefined word
{12} ok ~#
ERROR: do_interpret: no such symbol "~#"
ERROR: undefined word
{12} ok #
ERROR:
I also tried to type command :(This comamand I got from SUN Firev4800 manual reference)
OK ctrl - ]
I connect to SUN Fire 4800 using serial cable (DB25) to USB port at my laptop, using either "Hyperterminal" or "TeraTerm"
-Bit persecond : 9600
-Data Bit : 8
-Parity : None
-Stop Bits : 1
-Flow Control : None
I can see the screen and typed "init 0" to go to "OK" prompt.But it still does not work. What happen? What should I do? For this case, is there any influence from "keyboard" layout (because I use my laptop keyboard) ?
Note : I also tried typed *"init 5"* to shutdown the server, but it still go to "OK" prompt
Please suggest...
Thanks for any help
Regards,
Ferianto
Edited by: Ferianto on Mar 10, 2008 9:05 PM

300Gb SAS disk support for Sun Fire V445

Similar Messages

Maybe you are looking for