303 Emulators

Hey, does anyone know any decent 303 freeware emulators? Rebirth is a good option but they say it won't work on macs also i tried ABL2 but that costs 100 Euros, not too expensive, really. I've got Reaktor, can't find any ensembles there tho (unless anyone can recommend one).
Any advice would be appreciated
Matt

Hi
Try "airy au303"- as I remember it is a freeware
http://mac.softpedia.com/get/Audio/au303.shtml

Similar Messages

Satellite 1900-303: saving on CD is not possible

My 1900-303 doesnt let me save to CD. It appears to work then comes up with an error message asking me to "...change disk or update firmware..." I went to the Toshiba download pages and downloaded the firmware stuff and then extracted it and uploaded ( I think!) it, completing the job with a reboot. I still get the same message when I try to save to CD.
I am using Windows XP.
What is the problem and how do I fix it?

Hi
For me it sounds also like a not compatible or supported medium.
In the user manual you will find a list of tested and compatible CD.
This CDs should works without any problems.
But how do you burn the CD? Did you use any burning programs?
You should try to use Nero. This software uses a own information about the medium and drive and tries to burn the CD with the best performance.
Furthermore you should check in the drive properties if the option Enable CD recording on this drive is enabled.
Check it in: drive properties (right click on the drive) -> Recording tab

Satellite 1900-303: Is memory slot 2 configurable?

I have a satellite 1900-303 and I ask someone to tell me please if the expansion memory slot 2 is configurable. If it is, what for? To share video memory?
I have seen on one site that is configurable, but on users manual is not mentioned that and I need to be sure before to buy another memory module.
[Edited by: admin on 08-Jan-06 19:16]

Hi
This unit has a ATI MOBILITY RADEON with 32 MB video ram and like Barrie said its not a shared memory graphic card. In this case the memory upgrade doesnt increase this graphic video memory size. But of course the bigger memory size increases the notebook performance.
Regards

Is CPU upgrade on Satellite 2410-303 possible?

My Satellite 2410-303 has Pentium 4 Mobile 1.7GHZ processor. I want to upgrade its processor to Pentium 4 Mobile 2.8GHZ. I think that it is possible because its upper models have faster processor and that is unique difference between them.
Please, help me for this question and tell me is it possible?

Hello
You will be very lucky if someone has so good experiences with CPU upgrade on Satellite 2410 but on this forum you can find very nice comments about that. I have founded just two of them but very interesting. Check it out!
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=87488
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=59708
Bye

DVD Drive doesn't detect DVDs on Satellite 1900-303

My CD-RW/DVD drive is refusing to play DVDs, acting as though there is no disc in the drive no matter what I try. I haven't used the machine regularly in a while and have just started to discover this.
It also has a problem with burning to blank discs, if that's of any interest. I've bought a lens cleaner but it will not work as the laptop still doesn't recognise the disc. Also, I've never fiddled with the region control, and have already tried re-installing the driver, but to no avail.
It's a S1900-303, model number PS192E-00G1N-EN.
Any help anyone can give is very much appreciated, this is really inconvenient.
Thanks a lot.

Hello guys
First of all if there are any problems with CD or DVD burning you have to test different CD or DVD. Not every CD or DVD is compatible and can be used in the drive.
Therefore check different CD/DVD from different manufactures.
But if the drive will be not able to burn or read any CD/DVD so I assume the drive has a malfunction and only the device replacement could help.
@Judith: You unit seems to be new and the warranty should cover the drive replacement.
But before contacting the ASP in your country check the different medias.
In the user manual you should find a list with compatible and tested CD and DVDs.

Power suddenly off on Satellite 1900-303

Satellite 1900-303 but still working for surfing, the fan never stops and makes so much noisy, not nice! Problem even worse is that the power will be suddenly off without any notice. This could be caused by the overheating power supply system and it is kind of self-protection, could anyone tell me how to fix this and if it is worth to do so?
Thanks a lot,

Hi
I agree with MrPacman.
I dont think that the notebook loses the power.
There is another reason why the notebook shuts down automatically.
The clogged cooling grilles could lead to a higher temperature inside the notebook and to an overheating issue.
This is the reason also why the cooling fans are running all the time.
What you could do is to clean the ventilators using a professional compressed air spray.
Such sprays are designed to perform such cleaning and to get rid of dust and debris from notebook inside
Regards

Bios upgrade for Satellite 1900-303

I have a Satellite laptop 1900-303.
I have downloaded Bios upgrade bios-20071126165418 but when i run the Check.exe it informs me it is the wrong upgrade.
But the text files in the upgrade include 1900-303.
Is there a different Satellite model to the Satellite 1900-303 called simply 1900-303 or is this the correct Bios, please help.

CDROM of my laptop is failing to read from CDs now days and current i want to install new Operating system due to this i decided to use external drive to overcome the problem, but this laptop also fail to boot from external usb connected CDROM and there is no option to set in bios setup to boot from other devices or to external device. From this problem i decided to look for upper version of Bios to upgrade the current one may be it will be able to boot from external drive.
From this situation and my decision can any one tell me if i used wrong or right decision to do this and why so please i need your assistance please.
Your advice is very important to me because i don't hav enough money to by new computer or to order cdrom for this machine and i need to make it working so that i can use for my schooling activity.

Works on emulators but not on mobile devices

Hello,
My project works on emulators but not on mobile devices (no image and on Samsung it says "unsupported file").
Please help, I don't know what to do. My configurations: MIDP 2.1, CLDC 1.1.
Thanks in advance.
Edited by: Vitali.pom on Oct 27, 2011 12:01 PM

Edit: I succeeded to solve it accidentally. I did the following: Sign the jar in Netbeans, clean and build, the jar didn't work, I wiped out the .ks from the jar and clean and build again. Now it worked.
Edited by: Vitali.pom on Oct 30, 2011 1:28 AM

Report to check the stock transfer through 303 mvt type

Hi,
I understand that the stock transfer can be done through two ways
1. Using 351 against UB PO and go MIGO using 101 --> Can be checked in the report MB5T, for stock in transit
2. Using 303 and 305 mvt type --> the stock lies in Stock trans(Plant)
When we do 303 mvt type, is there any standard report to check the stock in stock trans (Plant) ? Please let us know.

hello
for this you can use MB51 only. same report you can give the movement types as 313 & 315.
Laxman

Stock Transfer B/W Two Plants ( 303 & 305 )

Hi MM Experts.....
Im working with the scenario of two plant stock transfer ie., 303 & 305 and in need to control the posting date of 305 should be gerater or equal to the reference document ie., 303.
There is a field LFBNR - Document No. of Reference Document but i cannot find the reference doc number ie., 303 on that.
Im tried to figure out the reference document in the MKPF & MSEG table but i couldn't only for 303 & 305 document alone.
Please suggest me ......
Regards
MM-L.Senthil Kumar

There is no link between 303 and 305.
One moves stock from a storage location into in-transit, while the other posts from in-transit to a storage location.
Depending on the time one needs to transport the material physically, you can have stock of several movements done with 303 in in-transit.
Further you are looking for a way to restrict posting with an earlier receipt date than issue date, but this just assumes that the GR folks are working wrong, while the people who perform the goods issue are doing everything right.
You better analyse your process and talk with the receivers why they enter a earlier date. I doupt that they are doing this to mess around. I would even guess they are doing it because they received the goods at this earlier date, but could not perform the GR because the goods issue folks had not done their job.

Can i run more than one app in my Asha 303 mobile?

Hello,,
my mobile: Nokia asha 303, updated...
*in my last smart phone i was able to run many apps at the same time and navigate between them, but in my new asha phone idnt know how to open many apps in the same time and also idnt know if this feature exist in this phone or not, so if any one know how to do this please help me??!!
**also if this feature isnt exist in this phone, so can them attach this feature in coming software updates or its impossible??
Thanks in advance ...

Sory bro nokia asha 303 doesnot support multitasking... U can hope... But there is no chance to add this feature

Key mapping to symbols is incorrect on Asha 303

Hello everyone.
I just got a slightly used Asha 303 and noticed that the symbols obtained when you press the lower-left gray arrow key (like colon, slash, plus, parenthesis, etc.) are not those shown on the key caps. (e.g. semicolon is shown on the comma key, but pressing the 2nd and that key gives me an accented o. The other keys on that right side of the keyboard all give accented letters.) How can I correct/change this, even if it means manually re-mapping?
Incase it matters, This phone was originally sold in Malaysia, Thailand or China I think since those maps were pre-loaded on the memory card. There are no special characters on the keys though, other than some yellow stroke marks on the R,T,Y,F and G keys. I have since upgraded the device software, restored it to factory defaults and set the language to English but it didn't make a difference.
Any ideas are welcome.

Hi,
Welcome to the forum!
It doesn't matter if your phone was originally sold in other country. You should be able to see the exact character when you press the button. Have you tried to switch off the phone, take out the battery for a second and then switch on the device? What happened after that?
If switching off/on of the device didn't work and tried all the possible solution for your concern, it's best to have your phone checked with the Nokia Care Point. If your phone is already out of warranty, repair charges may apply.
Check from this link for the nearest Nokia Care Point in your area: www.nokia.com/support
Hope this helps.

Materail recevice with referance to material document with mvt type 303

Hi Guru:
In MB1B we are creating mateiral document with movement type 303 from one plant to other plant.
Now same material we need to receive in other plant with movement type 305 in same T code Mb1B.
Now as per user requirement if there is number of item are coming in material document which is generate with movement type 303, why we need to give all material, qty, batch again in MB1B movement type 305,
while we are receving same material in plant.
In MB1B there is link to create material document with referance to material document but we can use this facility for creating new material document for movement type 303 of same mateiral, qty and batch.
Please suggest is there any way to use this 303 movement type material document with movement type 305.
Thanks.
Virendra
09887603301

Hi
In my opinion in MB1B you can not have Material Doc. as a ref. Doc. for M.Type: 305...
But for MIGO transaction you can have Material doc. as a ref. doc. for M.Type: 305
Goto ---> OLME ---> Settings for Enjoy Transaction ---> Settings for Goods Movements -
> Settings for Transactions and Referance Documents ---> There...for MIGO_TR...Transfer Posting ---> Referance Documents ---> For your M.Type: 305 assign Material Document as a Referance Documnt...
Reward if useful
Regards
S.Baskaran

Error in Transfer posting for movement type 303

Hi Sir,
I am getting following error while doing Transfer posting for movement type 303 thru BAPI_GOODSMVT_CREATE
Error in Function:
Order    not found or not permitted for Goods Movement.
I am passiing all mandatory parameter for it as per BAPI Documentaion in tcode BAPI
Transfer posting
Transfer posting without reference to a reservation
The following fields must be populated:
Material number
Plant
Storage location
Movement type
Movement indicator
Quantity in unit of entry
ISO code unit of measurement for unit of entry
If I am doing manually by MB1B tcode, it is successfully done.......here its not asking any ORDER No...
Please help me .........
Regards,
Krishan

I'm not sure what you're system set up is...   So I'd suggest looking at everything you enter on the screen and then checking to make sure you are passing all the information in the BAPI.
With that said our system does require posting date, and batch. You might check that.   Also check that you've included all the required information in the header.
Did you use the same data when you tried to process the BAPI that you used when you tried to do MB1B manually?

Stock transfer between plants two steps 303-305

Dear All,
We are using version SAP 4.7 we are using stock transfer scenarion between plants two steps. 303-305 source plant they will remove the stock with 303 movement in the receiving plant they will receive the goods against the 303 document number.
at the time with 305 movement type one document generated in that document table MKPF 303 reference number should be updated but in the 305 document the reference document 303 not updated in table MKPF.
why?...any updations required. because i want to develop an user exit at the time of Goods receipt with 305 movement in the receiving plant now it is allowing posting date as <= 303 document posting date it should be allow only >=303 document posting date at the time of 305 document generation in the receiving plant.
in MKPF table the reference document is not updating ....any ideas....
im using the standard Enhancement :MBCF0002
EXIT_SAPMM07M_001.
Regards
Anand..

Hi..
then how can control.
receiving plant 305 document posting date is should be greater than or equal to source plant 303 document posting date how can achieve this?.
via user exit in the reciving plant 305 document the reference document not updated. how to achieve this?...
any ideas..
Regards
P.Anandhakumar

303 Emulators

Similar Messages

Maybe you are looking for