-3095 error and then 5 when connected for first time.

I Inboxes the AppleTV and I get the -3905 error and when I tried again I get error 5.
cant seem to connect to my Wifi.
Thanks in advance!

Hi LeoCal,
I apologize, I'm a bit unclear on the exact nature of the issue you are describing, and/or when exactly you are seeing these error messages. If your Apple TV doesn't appear to be working correctly on first setup, you may find the troubleshooting steps outlined in the following article helpful:
Apple TV: Basic troubleshooting - Apple Support
Regards,
- Brenden

Similar Messages

Error with iTunes when connecting for first time.

Here is the error that I get when I connect my phone to my computer:
The software required for iPhone is not installed. Run the iTunes installer to remove iTunes. then install iTunes again.
I have the latest version on iTunes installed (7.3). I have tried removing itunes and reinstalling 4 or 5 times. Evan restarted my computer few times too. I'm running Vista so not sure if that's the problem.

Hi Bigrash,
Close iTunes, and disconnect your iPhone from your computer.
Go to "Control Panel", and go into "Programs".
Select "Installed Programs".
Here, find "Apple Mobile Device Support" from the list, and click on it. From the "File" menu, select "Change/Remove", and then click "Remove".
After that application has been fully uninstalled, go to this page, to download another copy of the iTunesSetup.exe installer:
Download iTunes - 7.3.0.54
After you've downloaded the iTunes installation pack again, launch iTunes, and connect your iPhone.
Do you still get that same error message, or not?
-Kylene

I have an iphone 4, i connect it to my laptop using the usb and then when connecting to itunes it says my phone is not up to date with itunes yet i cannot find an update 11.1 for my phones itunes? someone please help me.. kind regards

i have an iphone 4, i connect it to my laptop using the usb and then when connecting to itunes it says my phone is not up to date with itunes yet i cannot find an update 11.1 for my phones itunes? someone please help me.. kind regards

Itunes 11.1 is for your computer, not your iphone
It is required in order to sync with ios 7.

HT4859 i have setup an ipad without connecting to computer, i am now connecting for first time to itunes it asks if i want to set up as new ipad or restore from previous backup (my iphone not ipad), i have backed ipad up to icloud when i connect back to i

i have set up my wifes ipad mini wirelesly, i am now connecting for first time to itunes it asks if i want to set up as new ipad or restore from previous backup (my iphone not ipad), i have backed ipad up to icloud when i connect back to itunes will it give me an option to restore from icloud, i dont want to lose the apps and data my wife has already installed through her account... any thoughts

1. set up as new
2. transfer you wife's purchases.
3. Just in case create one computer back up manually.
Enjoy.

Error while calling web service for first time

Hello
I am calling a third party web service using BasicHttp adapter and passing user name and password in send port security tab by setting security mode to "Transport" and Transport client credential type" as Basic.
every time when i redeploy or after long idle time i am getting below error and then second call works fine.We are using BT 2013.
I used fiddler and i am not seeing any difference in both requests.Any one ran into this kind of issue?
An error occurred while processing the message, refer to the details section for more information
Message ID: {030802BF-70EC-4CA3-8FB5-B694E7A12136}
Instance ID: {7E04E1C0-3730-4645-9280-0FE51194CA67}
Error Description: System.Net.WebException: The remote server returned an unexpected response: (400) Bad Request.
<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<html><head>
<title>400 Bad Request</title>
</head><body>
<h1>Bad Request</h1>
<p>The request could not be understood by server due to
malformed syntax.</p>
</body></html>
Thanks

I will not comment on "IIS recycle its workers process
". I don't think you have ever said its IIS is the web server used by yourt 3rd paty to host their web service. We (atleast I) don't know wheather your 3rd party's web service is hosted on IIS. It’s some "Web Server"
could be IIS (if its Microsoft based) or Apache or something else.
Come back to your question, when the error says "The request could not be
understood by server due to malformed syntax", when you’re sending the message as expected by 3rd party service, then it has nothing to do with your end, error is returned by your 3rd party. And as you have mentioned you are tracing the
messages thru Fiddler and you see messages are constructed same and fine as expected by your 3rd party. Don't confuse its nothing on your party, either first deployment or last. Check with your 3rd party
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

K7N2G Beeps when booting for first time

I purshased the K7N2G series motherboard, and after connecting everything when I boot it beeps for about 1 and 1/2 seconds straight then stops, then a few seconds later it does it again. It does this until I power it off. A few times I was able to get into the BIOS, where the only things I set were the boot order, disabled the floppy controller, and changed the FSB to 133Mhz. But nonetheless, it did this before I got into the BIOS the first time. I have the following items attached to it:
AMD 2200 w/ fan(which I made sure was working correctly when I booted)
256MB DDR333 memory(installed in slot 1)
40GB brand new unpartitioned IBM hard drive
HP 4x CDRW drive
Hard drive is set as master and plugged into the middle of the cable, and cdrom is slave at the end both connected to IDE 1. I realize this isnt the best way to have them hooked up but its only like that for convenience purposes now. Any help on this would be greatly appreciated
Thanks.

hi
want some more info.
ram what brand.
what is the power output on 3.3 5v and 12v rails on the psu?.
what does the d-bracket show?
NOTE the d-bracket shows wrong to often but it could be worth checking.
sometimes it showes a floppy or cpu error when using bad memory.
bye

Sql query when fired for first time

Here is my query. I installed database and software using DBCA. Now i got connected to sql. Now my doubt is when I fired SELECT * FROM EMP from scott user, for the first time, what are the different steps followed to fectch the data. I mean how the user gets connected to the database and which background process works at what stages. Please give detailed explanation. Thanks.

When connecting to the database the client makes a request to the listener, and the listener checks the availability of the requested database service and responds to the client with an ACCEPT message, which indicates connection dispatching.
After that, the listener sends a RESEND message back to the client and uses this time to check the database service. The client recieves the RESEND message and sends the same request again to the Listener.
After recieving the ACCEPT message the connection is established, and this connection is different depending if you are using a Dedicated Server or Shared Server configuration.
When you issue the query:
SELECT * FROM emp;Oracle checks in the Shared Pool, in the Data Dictionary cache if the object exists and if you have sufficient privileges to access it (user Scott in this case). It then checks the Library cache if this statement has been executed before. If it did, another parse will not be necessary. Then the SQL statement is parsed (if necessary), interpreted and executed.
The DBRW (Database Writer) background process then checks in the Buffer Cache if the blocks which contain the information from the EMP table are already there. If they are, a physical read is not necessary and it fetches the rows from the Buffer Cache.
If they are not, DBWR reads the data files, retrieves the data from them, store the related blocks in the Buffer Cache (so in the next executions of this query a physical read will not be needed) and then the data is shown to the user.
There are other details envolved, but in a general view that is what happens.

I hate to say - DISATISFIED WITH with CUSTOMER CARE RESPONSE and VERIZON in all for first time.

I am currently on National 900 plan on Motorola Droid. I switched from AT&T primarily because I love to use data on mobile. Verizon provided me the unlimited plan. I was a very happy customer with Verizon untill now.
Scenario -
Today, I called up Verizon customer care executive to see why bill for the month was not readjusted. Can anyone believe it its staggering $1137.73 [Roaming charges 1019.19].
Since this January, I am visiting to Canada. On first visit in January, I called up customer care to see what options I do have to use my phone in Canada as I use it in US. Verizon had a wonderful plan - just the monthly data plan is escalated appear. 30-40$ extra than the normal appear. 29.99$ plan. I happily added that plan before visiting Canada. While there is Canada, I did get notification couple of time that I am exceeding data limit but again checked with customer care later - they readjusted the bill as that was 'FALSE ALERT' as I was on unlimited data plan while roaming as well in Canada since I paid the additional prorated of (30-40$) for period of my stay there.
This equation worked for first and second visit - Unlimited Data while I used to get FALSE ALERT.
On my third visit , things changed - Verizon stopped providing the unlimited data services. I called up as usual before this visit. Customer care executive said - you are set to go to Canada now. I was not very specifically told on call that the rules have changed now and there is limit to data usage while roaming. During this visit also, I got the alerts - I assumed this was also a FALSE ALERT like prior one.
But this time, it was not FALSE ALERT, now I charged with this fee. I raised my concern and called up customer care appear. 10 day before [today is March 6th], they assured me that it is going to be re-adjusted ONLY for this time. And, they also asked to check account after 48 hours and if not readjusted please call. But, I checked my account today and it was not readjusted. So, I called up customer care executive for half an hour -- not willing to listen to any logic of mine and he said politely 'SIR, WE CANNOT READJUST YOUR BILL' . I am still trying to figure out where is my fault when I was not told DATA PLAN HAS CHANGED FROM THIS VISIT.
I hope senior management will look into this matter and re-adjust current bill. It's due this March 10th. I would appreciate any positive response prior to this so that I can pay the bill and BE A HAPPY VERIZON CUSTOMER.
Sincerely,
Manoj K. [removed personal information]

I called them back yesterday night, not willing to listen my story. Sir we sent you SMS notifications. But these notifications, I also got when I had unlimited plans on first and second visit. Then customer care told SIR you don't need to worry - but this time I should have been very specifically told rules are changed before changing my plans which I wasn't. I was under impression that I am on same unlimited plans.
A job not well done in COMMUNICATING TO CUSTOMERS and using that an opportunity to OVERCHARGE $1100 - INSANE for one month bill. None of my fault. SMS notification is no communication as earlier SMS noitification were false positive and bills were adjusted as I was on unlimited data plan.
Now you change the rules and send SMS Notification; RULE CHANGE, one is not aware of.. ANY NORMAL person will treat SMS notification as FALSE ALERT.. isn't it??

Slow performance pages when accessing for first time

Hi Oracle developers,
Hope this is the right place to ask my question regarding Fusion Applications performance.
I'm dealing with a hard issue in our Fusion Applications 11.1.7 'test' environment for educational purposes. The thing is that whenever a page is accessed the first time (after a restart) it takes a very long time for the page to appear on the screen.
When it has been accessed before the page is rendered almost instantly. I suspect this has to with caching/compilation of the pages.
I already looked at article (Doc ID 1518515.1) and the settings were already set as is described in the solution part of the note.
My question:
Is there a fix for this?
Is there a way to precompile all Fusion Applications JSP pages after a restart.
Hope you can help me out with this!
Kind regards,
Charif

Hi Charif,
we are looking into ways to speed this up, but at the moment there is nothing you can do to avoid this delay. I know this sounds vague, but I cannot discuss future potential features here.
Thanks,
Oliver
Fusion Applications Developer Relations
@fadevrel
http://blogs.oracle.com/fadevrel
http://youtube.com/FADeveloperRelations

How do I keep photos on iphone when syncing for first time

I gave my iPhone 4 to my son as an 8th grade graduation gift.
He now wants to sync it to his macbook, so I helped him set up an itunes account.
When we go to sync it, it says it will wipe the phone clean.
He has some music on there from my itunes acct, and alot of photos he has taken.
How can he do an initial sync without losing his dat (mostly photos)
Thanks!

I am not sure if you can do this if it is your first time on a new iTunes account, but I like to uncheck the box that says something like "Automatically manage your media". This means that iTunes does not care what apps and music etc. that I have on on my phone and if I want to add something I just click and drag a media file onto my phone's name and if I want to delete something I just view files on my phone via iTunes and delete it. I never need to check and uncheck songs in iTunes using this method. Itunes also never has to automatically delete and replace "outdated" media this way. If you can access this checkbox on the Device Summary page when you connect to your phone to iTunes, I highly recommend trying this.

What to do when my iPod does not recognize the songs and then when connected on PC, it crashes iTunes?

Well, it all begin when I finished synching my iPod (classic 120gb) and ejected it through the iTunes. After that, I turned it on, but then it said that the iPod had no music in it. I found that strange, so I reconnected it on the PC (Windows 7), but the iTunes crashed as soon as the iPod os connected and I found that all the songs were inside the iPod (saw the files using the explorer). What can I do now to normalize it?

Try moving the existing backup file to a save location and try again. It is located here:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\

Can't open After Effects 5.5 - installed 2 years ago and just now using for first time

When I try to open Adobe After Affects 5.5 in Windows 7 64bit, it nearly immediately crashes and I get the following error. Can anyone help? Thanks!
After Effects error: Crash in progess.Last logged message was: <5920> <ASL.ResourceUtils.GetLanguageIDFromRegistry><0>Unableto obtain the User'Language'registry key at: Software\Adobe\After Effects\10.5\Defaulting to 'en_US'.

Run the cleaner tool and reinstall.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium

HT201250 i am using for first time the time machine and an external hard drive because I want to erase my macbook and start from zero files. do i keep my files in the portable hard disk when I connect it again with the macbook or the time machine will era

i am using for first time the time machine and an external hard drive because I want to erase my macbook and start from zero files. Am i keeping my files in the portable hard disk when I will connect it again with the macbook or the time machine will erase all?
I would like to know if after I erase all my data, empy hard drive inside the macbook, the time machine will erase all my files that I have saved in my "WD "My passport" external hard drive

Welcome to Apple Support Communities
Time Machine has to erase the external disk in order to make backups. Before setting Time Machine up, copy the files of your external disk to the hard disk of the Mac in order not to lose them, and then, set up Time Machine. The first backup will start automatically.
If you want more information about Time Machine, read the Pondini's site > http://pondini.org

Error message when loading "The connection to the server was reset while the page was loading" I have to hit "try again and then it connects.

I get the following message when trying to connect to firefox:
"The connection to the server was reset while the page was loading." I have to click on "try again" and then it connects.

Did you check your security software (firewall)?
A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls

I restored my ipod and then it said for me to connect my ipod to my computer and it says error could not complete your itunes store request an unknown error occurred (-9808)?

i restored my ipod and then it said for me to connect my ipod to my computer and it says error could not complete your itunes store request an unknown error occurred (-9808)?

This covers your symptom:
http://support.apple.com/kb/TS2753

-3095 error and then 5 when connected for first time.

Similar Messages

Maybe you are looking for