30g iPod Classic Sound Problem

Hello, my name is Jimmy Sulecki. I bought my 30g iPod back in 2006 and was very happy with it for about a year and a half. It had the normal wear and tear; I've dropped it a few times but it has never seen water.
In the summer of 2007, I was listening to a song through my iTrip in my car when the sound mysteriously and without warning cut out. I examined it and found that all of the menus worked fine. It could play video, synch up, charge it, format it, and do everything else you could expect a healthy iPod to do, except that no sound comes out.
I've tried about seven different headphones and four different iTrips, and nothing works- the sound just doesn't come out. I have talked to a lot of people about this and so far no one has been able to give me an answer. I tried reformatting it, I updated all of the software on it, and still no luck.
I am now to the point where I just don't care anymore. It's been over a year since I could use it, so now I'm willing to try just about anything. If I were to take it apart, are there any cords, wires, plugs, etc. that may have come unplugged that would stick out or that I could check? If anyone can give me any input on this at all, I would greatly appreciate it. Thanks a lot!

This link puts you in the middle of the 6 or so pages or replies of a post on this subject. The middle is where people started to report they were able to get Apple to replace their iPods, even out of warranty ones...
http://discussions.apple.com/thread.jspa?threadID=1095417&start=100&tstart=100
Best of luck!
Patrick

Similar Messages

  • 30G iPod Classic - Sound completely gone, while everything else works.

    My iPod classic lost sound. Any idea what happened?
    It's not brand new, but it's definately not banged up. I bought it from a friend and besides the occasional drop on the floor (nothing super hardcore) it's never been mishandeled. Today when I was listening to it on the bus, the sound started crackling, then completely cut out. When I plugged it into my Bose sound system, it would play for about 2- 3 minutes, then do the same thing. It wouldn't have sound again unless I let it sit for about 5 minutes, then the same thing happened again. I tried scanning it on my computer, and it said that it fixed all problems. Has anyone experienced this before, and either way, do you think that it could be fixed ?

    I'm having the same problem with my IPod 30G. 1st the sound started to crackle then went completely silent. I have tried two different sets of working earphones with no luck. I have also tried IPod in a docking station and still have no sound. I have also reset the settings on the IPod to original and still no luck. Any solutions?

  • Hi I have an ipod classic.The problem I have is that the ipod seems to sync new music ok but I have a number of podcasts downloaded and they do not sync to the ipod.Any suggestions please ?

    Hi I Have an Ipod classic.My problem is that the Ipod seems to sync music ok but I have a number of podcasts downloaded to itunes but these don't sync to the ipod,(they have in the past,but no longer). Has anyone any suggestions please ?

    hi gary
    have you tried to sync your ipod ,when you click on the side where it shows your ipod?
    Click on where it shows your ipod name for example garys ipod,when it opens up the summary page click the sync box,bottom right,and see if that helps.
    In the summary page click on podcasts,click the box on sync podcast box (top),read before when the box opens and says are you sure you want sync podcasts.,theres a box underneath,which says automatically include ,make sure thats ticked.
    hope this may help madforit

  • IPod classic sound quality issues

    Hi guys,
    I understand probably it's too much early to discuss this topic but anyway I try to ask.
    In order to the release of the new model (yesterday's event in USA)of the classic, anybody has any news about the sound quality complaints arised in the previous months?
    I mean, anybody knows if the quality sound problems, due to the change of the sound micro-chip, have been solved in the new modelMany thanks in advance for the help.

    Excellent question, the answer to which I eagerly await. If the sound quality improves, I might purchase a 120GB, otherwise, there are now alternatives by competitors with 120GB capacity, similar form factors, built in FM radio, subscription music services, and wireless sync of the music library for the same price as Apple's 120GB. They don't have the sound stage issue as the 160GB Classic. There is even a 240GB model being offered by a competitor.
    Too bad Apple didn't release a 240GB Ipod classic. Toshiba, Apple's hard drive manufacturer, announced a 240GB 1.8" drive on 9/9, coincident with the Apple Ipod announcements. I have a large and growing library of classical recordings as I explore the classical catalog, as well as many Podcasts. I could really use the space! I've input this request on Apple's Ipod feedback page and suggest that any like minded customers do the same.

  • Applie iPod Classic Connection Problems

    Hi there, me and my dad just bought 2 new iPod classics... Mines is working without any problems so far (although trying to figure out how to convert videos is ******* me off) but anyway his was working this morning before I left for work and I left it to update and download the newest artwork... Upon arriving home however his is unable to open up in iTunes and Windows Vista simply keeps trying to install drivers for the iPod everytime I connect it and ultimately fails everytime... Anyone have any ideas? Much appreciated

    Hey there Joeyleo,
    It sounds like you are unable to use any USB accessories with your iPod Classic. I would use the troubleshooting from the following article:
    iPod classic Troubleshooting Assistant
    https://www.apple.com/support/ipod/five_rs/classic/
    Here is step one to get you started, but there is additional troubleshooting within if needed:
    1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
    2. Press and hold the Menu and Center (Select) buttons simultaneously until the Apple logo appears, about 6 to 10 seconds. You may need to repeat this step.
    Tip:
    If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
    If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Ipod classic sound from only one channel

    My 80GB Ipod classic has sound from only one headphone. Same problem when docked so it's not a headphone or socket problem. It's as if only one channel is working. Any ideas?

    Did you check System Preferences>Sound to make certain that the balance scroll section was in the middle?
    Clinton

  • 160 GB IPod Classic : Sound Distortion?

    Recently, I purchased a 160 GB IPod Classic from Wal-Mart. Once I got home and synched my notoriously large music library onto it, I immediately noticed a huge difference in the sound quality.  The kicks and snares were ugly, and the bass was even more disgusting! All of my favorite songs were so distorted.  At first I assumed it was the headphones, so I tested them out on my ''ex'' 8GB IPod Touch to compare - and everything was perfectly fine (and better).
    I searched my issue online and seen many buyers like me having the same exact problem, and most of them purchased their IPods in 2009-2010!  How can a problem like this go unsolved for so long? Why wouldn't Apple change/fix the software to be up with the newer generation's standards if they are still for sale today? There has to be someway this could be fixed.
    So all I want to know is if I really wasted $249 on a device so worthless? I only bought this product for the 160 GB of memory since I couldn't fit all of my music on my IPod Touch,  and now I feel robbed.

    Music post 2008 ish is recorded into an MP3 file at higher volumes than prior to that era.
    Modern DAC (digital to analogue converter) can deal with this increase in volume (earlier albums, particularly those ripped from 1980's CDs) will sound quieter.
    Unfortunately the DAC in the ipod classic hasn't been updated from one of the early versions.
    What I've done for some recent purchases, is run them through this volume levelling software:
    http://mp3gain.sourceforge.net/download.php
    There is an equivalent version for the Mac.  They are identical in operation, and one version is no better than the other.
    I reduce the volume by about 10% on a whole album, even if it's only 2 or three tracks that are distorting.
    Remember to keep a copy of your original files for safety.
    The quality of the music does not degrade, and I'm really fussy and have $300 senheiser IE80s.  It's just the volume that is reduced so it doesn't upset the iPod classic DAC.
    However, there's no getting away from it, that this is a REAL PAIN, and there should be NO EXCUSE for apple selling such an inadequate product.  It shouldn't be too long before the iPod touch or Nano is in the 200Gb region.  After all, they can fit 64Gb on a Micro SD card whose outer casing is smaller than my small fingernail, what are Apple waiting for?

  • TS1369 iPod Classic Connection Problem

    My iPod Classic is not being recognized by Windows or iTunes. I spent hours going through all the troubleshooting scenarios today, swapping cables, iPod's, etc. I can't seem to locate an iPod USB driver in Device Manager, and there doesn't seem to be any troubleshooting steps to deal with this situation. Any suggestions?

    Hey there Joeyleo,
    It sounds like you are unable to use any USB accessories with your iPod Classic. I would use the troubleshooting from the following article:
    iPod classic Troubleshooting Assistant
    https://www.apple.com/support/ipod/five_rs/classic/
    Here is step one to get you started, but there is additional troubleshooting within if needed:
    1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
    2. Press and hold the Menu and Center (Select) buttons simultaneously until the Apple logo appears, about 6 to 10 seconds. You may need to repeat this step.
    Tip:
    If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
    If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • New Ipod Classic syncing problems, restoring problems

    Hello,
    Just got my 80gb Ipod Classic yesterday, and have had syncing problems, and now Itunes does not recognize it at all.
    I'm using the latest version of Itunes (7.6.2.9)
    Ipod Firmware 1.1.2 (or whatever the newest is)
    Windows XP Pro
    I'm a long-time user of a 5g 30gb Ipod and never have had issues like this. I am syncing to the same Itunes library as my old Ipod. Connecting my new Ipod Classic, I updated the firmware, and tried to sync. Halfway through the sync, I got an error. I disconnected the ipod and reset it. I tried syncing again, and again it would hang at some point, had to disconnect, and then it said my ipod had no music, but with 60gb free only. So obviously a database problem on the ipod and some mp3 files that my new ipod classic didn't like (though my old 5g ipod has no problem with this library).
    Next, I connected and did a Restore.
    I removed the culprit mp3 files from Itunes Library, attempted to sync again. Again, it would freeze at some point during sync. Had to disconnect Ipod while Itunes was frozen. Again, Ipod says has no music but with only about 60gb free.
    So Ipod is corrupted again. The problem is when I connect it to my PC, Itunes no longer recognizes it, so I can't do a Restore. What do I do?

    Just wanted to post my results, for future users benefit:
    Putting my Ipod into Disk Mode, connected to computer, Itunes recognized it, performed a Restore.
    Still had syncing/freezing issues.
    Decided that my Itunes library database was corrupted. Went into My Documents > My Music, and deleted the Itunes Folder, except for the containing Artwork Folder.
    Have been rebuilding my Library from scratch since, and have had no syncing problems yet again.
    Only problem is that in the outermost Podcast menu, it is always empty. The only conveninent way to access my Podcasts is to make a playlist and put them all in it.

  • Ipod Classic sound quality

    i bought a ipod classic but the sound quality sound really ****** and the volume is 2 low APPLE I WANT MY MONEY BACK !!

    2 factors:
    1. are you importing tracks at 128 bit (or less)?
    2. are you using Apple earbuds or some other company?
    Tracks at 128 or lower may sound tinny/am radio-ish.
    Low-end earbuds may also sound "off"
    128 bit is great for space conservation, especially on the smaller ipods (2-4gb), but the tradeoff is sound quality.
    Since the classic has sufficient space, I would check iTunes prefs and reset track import quality to 256 or higher. Personally, I import at variable lossless. Typically runs between 950 and 1100 bit, which is close to CD quality.

  • Ipod Touch or iPod Classic Sound quality

    Hi
    I am considering geting either an iPod Touch or iPod Classic and was wondering if there is any difference in sound quality between the two?
    Many thanks
    Ken

    I looked at the tech spec and could find no differences.  I would not expect there to be much difference since mp3 are not that good anyway and the earphones have a great effect on sound quality.

  • ITunes Match and iPod Classic sync problems

    Hi all,
    I've recently signed up to iTunes Match and use iTunes on my Windows PC (at home) and MacBook Pro (at work). I also use an iPod Classic which I sync with the Windows PC.
    I've had an issue which has happened a few times when I sync. I think the problem occurs when iTunes is open on both the PC and the Mac, but I'm not sure.
    When I sync my iPod, it increments play count, and updates the recently played playlist as normal, but every now and then, I am asked to sign back into iTunes Match, and when I do that, all play counts from the ipod sync disappear. The Recently Played playlist also no longer has songs played on the iPod included. However, on the "last played" field, the correct date and time of when the song was played in populated.
    The iPod is where I listen to music most often, and I would really like to keep the play counts up to date, but I can't figure out what is happening.
    Has anyone seen this before? Any ideas if I can resolve this?
    Thanks.

    The same thing happened to my iPod. It shows that it has no songs, but when i checked the iPod's memory, it was using the same amount of space as before (i had 52 gb of music, now it's just 52 gb of... nothing).

  • IPod Classic sync problems

    I'm using an iPod Classic. It's 160GB and it's the newest (ish) generation of it. I haven't had any problems syncing it in the past until recently after the latest iTunes update.
    My computer recognises my iPod when it's connected and so does iTunes. I've run diagnostics on iPod connectivity, it passes iPod connectivity, but not the device sync test, even though iTunes clearly recognises the iPod is syncing. Beforehand, I had reset my iPod thinking the sync issue was something with my iPod'a hard drive but i had done a check using diagnostic mode and my retracts and reallocs were both at 0 which I assume is very good for an iPod I've had for 3 or 4 years.
    The battery is fine and the hard drive seems to be fine. I've even tried both USB ports on my laptop (Toshiba with Windows 7 Home Edition).
    I even went and uninstalled iTunes itself (but none of the add-ons) and I'm still having issues.
    At the moment it's showing I have 7GB of music when there's only 234 songs on it.
    I've also done a reset several times by holding down the menu and center button but it's still not syncing my music properly, still saying I've got 7GB of music when there clearly isn't
    if it helps my iPod Classic is using the latest version, 2.0.4  and my computer's software is up to date as well.
    I'm also going to try to format the hard drive on it to see if that does something but I doubt it'll help.
    if anyone has any advice on how to fix this that'd be great

    Hhhmmm!
    Not actually sure what your question is.
    That said, it appears to centre on the fact that you have 234 songs taking up 7GB of storage. Is that correct? If so, there are two possibilities.
    How do you arrive at the figure of 7GB? Is it only the music, or is it all of the storage being used on the iPod? With the iPod connected to your iTunes Library, check to see how much storage is being used by each type of media. In particular, how much "Other" is being used? Hold your mouse over each section so that the info balloon appears and read off how much storage is being used by each type. The crucial section is the Other (as indicated in the screenshot below).
    Perhaps most, if not all of your music is encoded at a very high Bit Rate. What format are you using to import from your CDs? Check several songs and make a note of the Kind, Size and Bit Rate. Then post back with that information.

  • ITunes 11 and iPod Classic Playlists - Problem?

    I have an iPod Classic dedicated to use in my car [lives in the glove compartment]. A couple of days ago I decided to completely refresh the content, so plugged it in to my Mac Mini and set to work. First step was a factory reset, then a check for updates [none - it was running the latest OS] and then I loaded up about 156Gb of music data [all Apple Lossless].
    Returning this to my car, I have discovered that it now plays music as before, but that it no longer recognises playlists. So for example, in my iTunes client, I have a PlayList folder called "_Compilations" [the underscore, _, brings it to the top of the list], in which I store about 8 or 9 playlists I have dedicated for use in my car. I can no longer access any of those playlists from my in-car stereo.
    ***Nothing*** has changed in this configuration, except the fact that I have upgraded to iTunes 11. There have been no changes to the configuration or firmware of the Pioneer in-car system, which is an AVIC-920BT
    http://www.pioneerelectronics.com/PUSA/Car/GPS-Navigation/AVIC-X920BT
    and the factory reset of the iPod did not result in any firmware or other updates. I have re-loaded the iPod with the exact same load-out as I had before, but this makes no difference. I have tried a variety of different things, but for some reason, within the "_Compilations" folder [which the Pioneer can see and let me navigate to] the Pioneer can only see a huge collection of individual songs.
    I bought the Pioneer new with the car in May 2011 and it has given me no trouble since then.
    I would be very grateful if anyone can suggest if anything has changed, in iTunes 11, with respect to playlist management, or if they can think of any other reason why I would suddenly see this unusual [and wrong] behavior. Oh, for what it's worth, if I remove the iPod from the car and use it with earbuds, all my playlists are present and correct and work perfectly via the wheel controller. This looks very much like some form of config change...
    Any feedback or suggestion would be very much appreciated.
    Thanks!
    C

    I have an iPod Classic dedicated to use in my car [lives in the glove compartment]. A couple of days ago I decided to completely refresh the content, so plugged it in to my Mac Mini and set to work. First step was a factory reset, then a check for updates [none - it was running the latest OS] and then I loaded up about 156Gb of music data [all Apple Lossless].
    Returning this to my car, I have discovered that it now plays music as before, but that it no longer recognises playlists. So for example, in my iTunes client, I have a PlayList folder called "_Compilations" [the underscore, _, brings it to the top of the list], in which I store about 8 or 9 playlists I have dedicated for use in my car. I can no longer access any of those playlists from my in-car stereo.
    ***Nothing*** has changed in this configuration, except the fact that I have upgraded to iTunes 11. There have been no changes to the configuration or firmware of the Pioneer in-car system, which is an AVIC-920BT
    http://www.pioneerelectronics.com/PUSA/Car/GPS-Navigation/AVIC-X920BT
    and the factory reset of the iPod did not result in any firmware or other updates. I have re-loaded the iPod with the exact same load-out as I had before, but this makes no difference. I have tried a variety of different things, but for some reason, within the "_Compilations" folder [which the Pioneer can see and let me navigate to] the Pioneer can only see a huge collection of individual songs.
    I bought the Pioneer new with the car in May 2011 and it has given me no trouble since then.
    I would be very grateful if anyone can suggest if anything has changed, in iTunes 11, with respect to playlist management, or if they can think of any other reason why I would suddenly see this unusual [and wrong] behavior. Oh, for what it's worth, if I remove the iPod from the car and use it with earbuds, all my playlists are present and correct and work perfectly via the wheel controller. This looks very much like some form of config change...
    Any feedback or suggestion would be very much appreciated.
    Thanks!
    C

  • IPod Classic 80GB Problems that "suddenly" appeared

    Ok I know its not just me thats suddenly experiencing issues with their iPod Classic, its cleary iTunes thats screwing it up. What is Apple doing to fix it?
    - disconnects automatically after syncing
    - freezes iTunes but will still open in file view
    - frozen iTunes is suddenly "fixed" when iPod is removed
    This happens on both Windows Vista and Windows 7 with the lastest iTunes and iPod firmware's. Im assuming it also happens on Win XP and have heard reports of it happening on Macs as well. Anyone got a solution?

    lucky but it could have sustaind more damage from the drop but u can buy an adaptor for $20 and a cheap 32g flash card for $40 to replace your hdd witch would expand your battery life by almost double cause id say a new hdd from apple would be kinda high if your interrested just email me back ill explain better and digg up the 2 site links for the items hope u get it workin couse id die if somthing happin to mine :P

Maybe you are looking for

  • Folder with question mark keeps coming back

    Hello there , i have a problem with my mac pro. The problem is that every time i start up the mac it can't find my startup disk and then gives me the Folder with ? mark in it. Some times just do a start up for the second time helps but most of the ti

  • URGENT: How to allow ACTIVE X on a particular site?

    I am currently troubleshooting a problem for my company. Due to security reasons, we block active X on our proxy server (Sun ONE Web Proxy Server 3.6 UNIX version). We are now blocking ACTIVE X by HTML tags filtering (OBJECT TAG). Is there any way I

  • IDoc triggering without Output type?

    Hi Experts, I need a help regarding triggering of IDoc. I need to trigger an o/b IDoc for message type SHP_OBDLV_SAVE_REPLICA without having output type on creation or save. Could you please anyone advise is there anyway to do it? It would be great i

  • Crashes randomly

    Lately my MBP (from 2006) has been making a lot of weird noises and then the screen will go black and the little white light on the push-in button doesn't light up. I try hitting the power button and noises are made but nothing else happens. Then I c

  • Customizing the Contract Template in Oracle R12

    Hi,     We would like to customize the Contracts template, "Oracle Contract Terms Template", where in we have to include a new page and logo and customize the signature. Referred the Note ID 1269527.1, it was not addressing our issue. We are trying t