30g video no sound

I have a 30g ipod video, everything on it works fine but when i plug it into headphones,aux in my car or on the dock to play music no sound comes out. Any ideas of what could be wrong or how to fix this issue? thanks

The same thing recently has been happening to me. It only plays out of one headphone now and its not the headphones as I've tried five different pairs which I know that work. I haven't dropped it or anything. Just recently, out of nowhere, it started to do this.

Similar Messages

The sound quality of my speaker suddenly got really poor when playing music or videos. Sounds like an old AM radio or Sputnik. Pretty sure it's hardware related but maybe not. Thoughts on what the problem might be and if it can be repaired?

The sound quality of my speaker suddenly got really poor when playing music or videos. Sounds like an old AM radio or Sputnik. Pretty sure it's hardware related but maybe not. Thoughts on what the problem might be and if it can be repaired?

The batterys the ipods come with are very sensetive somtimes they dont react right to the first couple of charges. Try fully charging it and then leaving it on until its completely drained a few times. If that doesnt work it might be a lemon.

30G Video IPod and Windows Vista - Help!

I just recently bought a new computer equipped with Windows Vista. I have a 12" G4 iBook that was my main computer from which I ran my 30G Video iPod, and now I am wanting to sync my iPod with my new Windows computer, and this will be the only system I use with my iPod.
I realize there are many problems with compatibility of iTunes/iPods with Windows Vista.
My question is, barring the problems with iTunes, I downloaded the latest iTunes anyways and tried to use Yamipod to bring my 1600+ songs onto my computer from my iPod by bypassing iTunes. Problem is, my computer doesn't even recognize the iPod at all. iTunes does, but when I cancel the box asking me to reformat my iPod to Windows format and try to use Yamipod, Yamipod doesn't even recognize an iPod existing. I thought maybe it was just the program, so I tried about 4 others, but nothing. I also used the cd that came with my iPod and put the drivers onto this computer, but the actual computer still doesn't even recognize it plugged in.
Any ideas? Also, because a lot of my songs are in m4a format, how will that work if I am able to put them on this computer? Will I have to convert them all to mp3?
Thank you for any help you can give.

And given that Vista has been available in Release
candidate version for ages and that the release date
has been known for ages, shouldn't apple have made
the effort to make itunes compatible with Vista?
After all, the vast majority of itunes users live in
Windows land.
perhaps you should familiarise yourself with the common usage and implications of the symbol string
but as you clearly aren't familiar with it, if i took your question seriously, which i don't, then the answer is no...
your argument is that being first and being in the majority rules
that'll be apple then won't it
i) i can't be bothered to check the itunes release date, certainly it was out in 2001, which is several years before microsoft even figured out what to call the os formerly known as longhorn, let alone finished sawing off the pieces it couldn't make work
ii) the majority of people with portable music players use ipod/itunes, so it is for microsoft to conform with the majority and not make changes that impair the products used by the majority
so, by your own argument, it is microsoft's responsibility to maintain compatibility

30G video iPod won't show on desktop or in iTunes

Powerbook G4, 10.4.8, iTunes 7.0.1
30G Video iPod, connected by USB cable -- oh so frustrated! Big trip coming up and can't put any of my audible books on my iPod!
This seems to have started after I upgraded iTunes to 7.0, is this source of my problem?
Suddenly I plugged in my iPod and it won't show up on the desktop, iTunes or Disk Utility
Things I've tried:
Reset iPod, (can't restore the iPod, since no application or utility will recognize it), did all upgrades to iTunes, unplugged all usb ports, repaired all permissions, tried plugging it into another Mac G5 and it wouldn't show up there either.
It plugs into my power source from the electrical outlet and is fully charged, and plugs into my car radio via a monster cable just fine, just won't connect to a computer.
Please, I'll try anything. Thanks so much for your help.

Try this site.
http://docs.info.apple.com/article.html?artnum=60950
It's probably too late for your trip but if you're still having the problem try it.
Post back with results.

How do I import video and sound files from a hard drive into Final Cut Pro X?

I just installed the lastest upgrade to Final Cut Pro X. I have an external hard drive connected to my computer and I want to import video and sound files into Final Cut Pro X- how do I make the transfer?

File>Import Files (Shift-Cmd-I). Select the files, fill out the dialog box that appears as you need.

No video or sound from iSight

I have a frustrating problem ! My external iSight camera has stopped working, ever since I moved from a PPC G5 to an Intel Mac Mini. I did actually have it working for a while, but I must have changed something and now nothing I do will get it to work again.
I have tried isolating the problem by removing other Firewire devices - the camera is always correctly recognised no matter where I plug it in; System Profiler shows it as present, and it is shown as available as a video or sound source. The problem is that when I actually try to use it, I just get blank (black) and no sound input.
If I plug the camera into another machine, it is recognised and works OK !
I'm sure this must be a software conflict, but I don't know what with. Console logs just show similar messages from any application that tries to use the camera, saying that it's unable to open the source for input. I'm suspecting that some 3rd party plugin or driver is being loaded and crashing out - perhaps because I migrated over from a non-Intel machine (I did a clean install, and ran the migration assistant).
Any suggestions how to find the culprit ?
Powermac G5 Dual 1.8 Mac OS X (10.4.2)

Phew - got it working, but don't ask me how !!
I did a fresh install onto the internal HD (I already boot from an external one, see below). No dice. So I unplugged everything, and plugged in just the iSight.
I have a LaCie external HD which also works as a Firewire and USB hub. With this unplugged, the camera worked on the fresh install. I then re-plugged in the firewire leads for the hub, and connected the camera to the hub. Rebooted (****, OS X boots fast on a fresh install on the Intel machines !). Still working. Then I plugged in the USB leads for the hub, still working. Which is strange, because that's exactly the configuration in which is WASN'T working a few moments before ! I then rebooted into my original system (on the external FW disk), and it's STILL working.
Now this is really strange, because this is the config in which it really wasn't working before. All I can figure is that somehow connecting via Firewire first, rebooting, and then USB somehow tells the hub to work correctly as a FW hub. But this doesn't make too much sense, because other external HDs I have still worked fine before - it was only the iSight that wasn't working.
The only other thing I can think of is that in the process of doing this, I moved a small plastic photo frame that I have that was sat ontop of the mini. The thing with this frame is that it's 2 bits of perspex held together by magnets. They are only small, but I wonder if there was some interference caused by the tiny magnets that somehow effected the Firewire connection (but only for the iSight ?). Anyway, that's staying off the top of the mini for now !
I'm not sure if this explanation will ever help anyone else, but it does give you an idea how to isolate a problem. What I did was isolate the OS (by doing a fresh install), isolate the hardware (by unplugging it all, and selectively re-plugging it), and isolate apparently unrelated external influences (by removing the picture frame). If you're having strange problems with your computer, be methodical, and you will probably isolate the cause and fix it !
Mac Mini Mac OS X (10.4.8)

How can I import video and sound from my sony camcorder?

I have just bought the mac. I'm struggling to import video AND sound from my Sony DCR-SR87 hard disk handycam camcorder. From what I've read already, I ended up purchasing and downloading Quicktime MPEG2, and used the Utility MPEG Component Lion from downloaded MPEG Streaming 1.9.3b6 to enable video and sound to play on the computer directly from the camcorder. The problem is that when I import these clips using iphoto (it pops up when I connect the camcorder), the sound does not accompany the video onto the computer. I've hit something of a brick wall and would really appreciate any help.

OK, according to
http://support.apple.com/kb/ht3290
your camera is supported by iMovie 9. Perhaps the question is better asked in the iMovie forum. Would you like me to ask a moderator to move the thread?

My video recording sounds not working but other sounds are working fine, I've tried clearing the little mic thing near my earphone hole and had no success can someone please help me out?

hhi guys
my video recording sounds not working at all but it's working for other things such as music. I've tried to clear my sound thing near the earphone hole but had no success can someone please help me out?

Had an Iphone 4 for about 3 months now. This happened to the first one I had and they ended up having to replace it at the apple store just a couple weeks ago 6/2. It happened again last night to my new one. This time i was able to correct it by going to itunes, backing up the phone to icloud, and then restoring the software. Mine did not work with voice memo, but did work with headphones plugged in, and would also work on speaker. I could hear callers but they couldn't hear me. I had purchased a new case (lifeproof case at $79.99) because it comes with plugs that cover the headphone jack, and the charging port, and is also waterproof. I heard that the root cause is due to lint, dirt, etc getting inside the headphone jack. Well, must be something else. It's a 10 days old phone, and has been in this overpriced case the whole time, and I have not used the headphones. I hope this doesn't keep happening.

Video clip sound after burning

I use Adobe Premiere Elements 10, and I recently made a music video. I put a soundtrack to it. I turned the video clip sound all the way off and just let the soundtrack play over it, like a music video. I then burned it to a disk and played it on my DVD player. When it was playing, I noticed that the video clip sound and the soundtrack were both playingand over lapping each other. I burned several disks after turning every other sound off but the soundtrack, and still the video clip was playing over it. Please give me advice on how to fix it, as it would be appreciated.

Welcome to the forum.
First, I would play the Timeline with the Audio Mixer Panel open, and watch for the Levels of the other Video Tracks. You can also use that to Mute other Audio Tracks.
One can also Alt-click on the Audio portion of the Clip, and just Delete that.
Now, did you place your music onto the Fixed Soundtrack Audio Track? Some users have experienced problems with the two Fixed Tracks, Soundtrack and Narration, and the normal "fix" is to just drag the music (or narration) to an empty, "regular" Audio Track.
Good luck,
Hunt

Upgrading from 1gen mini to 30G video...

Hi all,
I'm currently awaiting the arrival of my new 30G video which will replace my old faithful mini. My husband is going to take the mini, so how do we do this painlessly?
I would like to just disassociate the mini from my iTunes library somehow and associate the new video with that library. Then have my husband associate the mini with his old iTunes library left dormant from when he lost his old 3rd gen iPod about a year ago. Is this possible?
Thanks!

This is very possible... Well, it is very simple. Just plug it in. iPods mirrors the computer it is attaches to. So when you plug in your new iPod, the new iPod is going to sync all your musics into it. When your husband plugs your old iPod in his computer, iTunes is going to ask if he wants to change the your musics to his musics, and all he have to do is click yes.

Converted videos without sound

i have added and converted 5 videos to ipod format, and added to my ipod.
even though the videos had sound before they are not playing with sound on my ipod or on my itunes
how can i make it play with sound

The discussion of converting/ripping DVDs to iPod format is forbidden on these boards - [Terms of Use|http://discussions.apple.com/help.jspa]. I would suggest searching the internet or going to the [iPod Lounge|http://www.ipodlounge.com] to find what you're looking for, because I'm sure you're talking about converting your home movie DVDs to iPod format and not breaking the Copywrite protection of Commercial DVDs and U.S. Federal Law in the process.
P.S. Breaking Copywrite Protection is also against the law in most other countries as well.

Videos without sound

I have the latest itunes on my pc and videos in an endless list of formats avi mpeg flv wma
I've imported the files into the itunes library and through the advanced option I click the 'convert to ipod/iphone version'
it takes AGES for the conversion only to find out the video lacks sound. There is no audio signal at all.
Any suggestions?

Try using MPEG Streamclip to convert the videos; more information on this issue is available in this article.
(36772)

Trimmed Video has sound but no picture

I need to split a large video file in two. When I use the trim function and select the first half of the video, it works great. I get a file with just the first half of the video - great sound and picture. However, when I try and create a file containing just the second half of the video, I get sound put a scrambled picture. I've tried trimming as well as deleting the first half of the video and the end result is the same.
Any ideas of how to fix this?

i have the opposite problem as you, video but no sound...

30G Video pod's click wheel problems

I have a 30G video pod. The click wheel doesn't work. In fact it seems to be frozen/locked up. I have tried the hold button fix and I have restored this ipod. After the restore, it is now locked on the Language screen. I can't select anything to move past this. It then shuts itself off due to inactivity. I can see and play the songs on there if I connect it to my computer so I know everything inside is working.... just not the click wheel.
Any suggestions?

have you tried a restore?
I would start there
http://docs.info.apple.com/article.html?artnum=60983
KoDor

Rt cnbc has no sound, while other videos have sound. Suggestions?

Rt cnbc has no sound, while other videos have sound. Suggestions?

Are the videos that still have sound those in the Videos app, or a different app ? If Videos app then have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound. Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

30g video no sound

Similar Messages

Maybe you are looking for