30gig ipod video keeps resetting itself

my 30gig ipod video keeps resetting until it runs out of battery life, if i have it connected to my pc, it just keeps resetting indefinately, and if i disconnect it, it does so until it runs out of battery.
i've already reset it manually, returned it to factory conditions, I dont know what else to do, any help at all would be appreciated.

Hello eonitwat,
And welcome to Apple Discussions!
Try manually forcing the iPod into Disk Mode and then reconnecting to your computer. This might prevent the iPod from continuously rebooting to allow you enough time to try and reformat the iPod completely using the tools provided by Windows.
Here are instructions on how to reformat your iPod on WIndows. The instructions are for Vista and XP, but you'll find that Windows 7 is very similar to Windows Vista.
http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
If still no luck, you may want to consider having the iPod serviced.
Worth a shot.
B-rock

Similar Messages

  • My ipod video keep reseting itself

    my ipod video keep reseting itself when i do a fast forward during a video is played......
    why would this happen?

    Check out my posting here
    http://discussions.apple.com/thread.jspa?threadID=483451&tstart=0
    Regards
    ./sherif

  • My Ipod just keeps resetting itself.HELP!!!!

    My 60 GB ipod video just keeps resetting itself. I have tried to reset it and plug it into my computer, what should I do??
    Windows   Windows XP  

    Try the standard fixes:
    - Reset. Nothing is lost
    Force an app to close: Hold down the On/Off button for a few seconds until a red slider appears,
    then hold down the Home button until the app quits.
    - Restore from backup
    - Restore to factory settings/new iPod
    If still problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • IPod touch keeps resetting itself

    Hi I recently received an iPod touch replacement for my old one that broke. The new one is 3rd generation, which I upgraded to 4th generation just earlier. The problem is when Im using my ipod it is very unstable and resets itself automatically. How can i stop this from happening because every time it resets I need to restore it via the computer. Please help me
    Message was edited by: lexusssss

    Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.
    Above is from the same article I provided above.

  • IPOD NANO KEEPS RESETING ITSELF

    Every time i unplug my ipod nano from my computer it resets it self and all the music i've just added isn't there anymore. What could the problem be?

    If its been sitting for awhile, its showing the apple logo because it's waking up from Deep Sleep mode. Deep Sleep kicks in when you let your iPod sit for about 36 hours. If it is only when you let in sit for long periods of time, don't worry about it, it's normal. It had nothing to do with your cousins.

  • My ipod keeps resetting itself when i plug it in to the computer, now what?

    Basically, I plugged my ipod into my laptop as usual and itunes sprang up with an error message that i can't quite remember. I just remember that it mentioned a file corruption and that i should either restore the ipod settings or i should disconnect and reconnect it. I reconnected it and got the same result, then tried again. This time iTunes didn't recognise it all and within a minute of being connected my ipod reset itself. The laptop registers it, but my ipod just keeps resetting itself and i don't know what to do. I've tried resetting it and restoring default settings, so what more can i do or is a repair the only option?

    Follow the steps mentioned in this article to disable the camera notification: http://support.apple.com/kb/TS1501 , then try again to connect to iTunes.

  • My 30G iPod video keeps restarting while updating!!!!

    My 30G iPod video keeps restarting itself while i am updating my songs. now my ipod has a folder with an exclamation point picture on it. nothing works and it wont let me restore it. i just began connecting my ipod to my new laptop and there has been nothing but problems so far. my ipod worked perfectly fine on my old computer. can anyone help?
    Gateway Laptop Windows XP windows media center edition 2005
    Gateway Laptop   Windows XP   windows media center edition 2005

    thanks, i got my ipod to restore now but i still have the problem of my ipod just restarting itself while im updating my songs. this never happed on my old PC
    Gateway Laptop Windows XP windows media center edition 2005
    Gateway Laptop Windows XP windows media center edition 2005

  • IPod keeps reseting itself while updating

    I've had previous trouble with my 60GB iPod Video, but I think this is the last problem... I am trying to update my iPod but while its updating the iPod keeps reseting itself over and over again... please help!!!

    There's nothing you can do but bring it back to the store. Mine does the same thing, it just goes to show that Apple is so busy pushing these new iPods on us and releasing them too soon that the customers end up having to deal with their hardware failures---all because they didn't take the time to test these!!!
    PowerMac G5 2.3 GHZ   Mac OS X (10.4.3)  

  • My IPOD keeps resetting itself

    When I connect my IPOD to the computer with the updater program running, the unit just keeps resetting itself on its own. The dpdating tool give the error message "can't mount IPOD" and shuts down. As long as I have the IPOD connected to the computer it continues to reset itself. Does any one have any ideas how to fix this problem?

    hi tricky D!
    hmmmm. let's try giving the technique outlined in this document a try:
    Strange iPod behavior when Windows confuses iPod with network drive
    (it sometimes seems to help in these weird cases.)
    keep us posted.
    love, b

  • Ipod keeps reseting itself

    so after i had the trouble with my ipod last week and ended up replacing it at the apple store for a small fee of $32.05, this new ipod is giving me more problems.
    so this new ipod keeps reseting itself. for example, i connected it to my computer and the "do not disconnect" sign won't come off and it's not connecting to itunes. so i reset the ipod. it finally connected and then i ejected the ipod no problem. so then from now on, it resets itself, leading me to restore the ipod. so i restored it, and the problem still occured. and then i reset it again and now it's working fine.
    in conclusion, does anyone have some suggestions/comments/idea for this situation?

    that's EXACTLY what is happening to me. i plan to go back to the apple store very soon because i've run out of ideas as to what to do to solve this dilemma. i'm glad though i'm not the only one with this problem although i am sorry you have the problem too lol.

  • My iPhone 5 keeps resetting itself, If I take my device in to apple what will they do and more importantly what will it cost me???

    My iPhone 5 keeps resetting itself, If I take my device in to apple what will they do and more importantly what will it cost me???

    If your iPod Touch, iPhone, or iPad is Broken
    Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
    ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5 and 5C. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
    You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
    You will find respective repair costs in the appropriate link:
    iPod Service Support and Costs
    iPhone Service Support and Costs
    iPad Service Support and Costs
    There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task:
    1. iResq or Google for others.
    2. Buy and replace screen yourself: iFixit

  • Ipod mini keeps turning itself on and playing

    Hi,
    Hopin gsomeone can help me here. My iPod mini keeps turning itself on and playing..thus running down the battery overnight. I've checked that the alarm clock is set to OFF. I turn the iPod off, put Lock on the keypad and in the morning, it's turned on and playing. Any ideas for me?
    Thanks!
    Val

    Did you also check the calendar alarm?
    EXTRAS > CALENDAR > ALARMS > OFF
    Cheers!
    -Bryan

  • Ipod mini keeps turning itself on???????

    My 4GB ipod mini keeps turning itself on. It does this even when it is locked. This is a real pain as it keeps running the battery completely flat.
    Can anyone suggest why this happens & how to stop it?
    Many thanks.

    Your welcome. Another thing I ought to have mentioned is to check calendar events also. : )

  • My iPod mini keeps turning itself on.

    Well my iPod mini keeps turning itself on although i've turned it off and put it on hold. It's draining the battery and it's annoying me as when i go to use it i can't because the battery is flat. Does anyone know why it's doing this and can help me please?

    Sounds like an alarm is set.
    Go to Extras>Clock>Alarm Clock and turn off the alarm.
    JC

  • Illustrator 2014: Scratch disk preference keeps resetting itself

    Hello Illustrator community.
    I have recently noticed that in my Illustrator CC 2014 18.0.0, the scratch disk preference setting keeps resetting itself. I'm using a MacBook pro with a single SSD, but I have an external Lacie Thunderbolt SSD that I got to use as the scratch disk for Illustrator and Photoshop. The problem is that if I set the scratch preference to use the external as the primary and my startup as the secondary,  everything is fine and it let's me know that the change will take effect once it's reopened. Upon reopening Illustrator I double check and it's saved, and everything works fine. But if I happen to open Illustrator without my external attached, when I check the scratch preference,  it will revert to using the startup as the main scratch location, which I understand.  But the next time illustrator is opened with my external connected, the scratch setting is still defaulted to using the startup disk. At that point I would need to change the preference, close illustrator and then reopen to make sure Illustrator is using the external as scratch.
    So for some reason it's not saving my preference for the scratch disk, while all other preferences seem to be saved fine. In Photoshop CC 2014, I can set the scratch preference,  which works fine, close Photoshop and reopen without the external attached and then close and reopen with the external reattached,  and it will remember my preference for having the external as the primary scratch.
    Is this just the way Illustrator is meant to work, or is this possibly a bug? Anyone have experience with this?
    I used Illustrator CC 17.x.x before this but didn't notice if it operated the same way, since at that time I didn't have a dedicated scratch disk to use.
    Thank you very much, I look forward to your help and replies!

    The last thing Adobe AI does upon a quit is to write the existing state of the preferences file to disk. If it is using the local HD as scratch, then that is what is recorded in the preferences.

Maybe you are looking for

  • How do I copy a few lines from a pdf document to a Word document?  I'm not looking to convert the whole document, just need to copy a few lines here and there.

    How do I copy a few lines from a pdf document to a Word document? I'm not looking to convert the whole document, just need to copy a few lines here and there. ps.  Wow, what a user UNFRIENDLY site this is!

  • Acrobat X Pro patch failure

    Windows 7, CS6 with Acrobat X Pro.  I tried to install the recommended patch 10.1.6.  Installation failed, saying htat some other patch had been applied (sorry I can't be more specific).  Problem is that the failure took out my PDF writer!

  • Importing Photo's, the best way

    I have brought photo's into iMovie two different ways, Drag and drop from a folder on my desktop, and import into the clipboard, then drag them into the iMovie. I have noticed a difference in the photo's, one will have the entire photo in the clip, t

  • Auto filling formula

    I am looking to use Numbers to do the following. I am required to know how many units are used in a specific amount of time. I know that complete unit is used in 25 minutes. I am trying to break it down to minute increments. I will also use this form

  • Generating work schedule in PT01

    Dear Colleagues, Few issues related with PT01 transaction: 1. I have PWS referencing DWS that is SDAY, SDAY has 3 variants, but on PWS customizing screen variants are not visible, so it is not clear is it just SDAY or SDAY I or SDAY S. 2. On PWS conf