310a problems with connectivity and ePrint services

I just received a HP 310a as a replacement for what HP said was a faulty 210a. The 210a wouldn't stay connected to my network and HP support gave up and sent me a giftcard to buy a replacement.
I set up the replacement. It too had the connectivity issue but other wireless features all worked fine. I could print via email to it's dedicated email address and print via my ipod using HP iprint app.
While trying to use previous support suggestions to fix the connectivity issue, the printer now has lost it's ability to connect to web services and I can't enable eprint features. When I try to connect to web services I get an error message that says" web server problem" "problem connecting to the web server.
I have set up the printer with a manual address abd that's when the problem started.
Please, any suggestions how to get this resolved.
This question was solved.
View Solution.

Here is what I recommend:
1. Set a static IP but make sure it is outside the DHCP range of your router. If your router uses the whole range (.2 to .254, reduce the range to .2 to .200 or something then assign the printer outside that, like .220).
2. The gateway address goes in both the gateway field and the first DNS entry. Leave the second blank. The gateway IP usually ends in .1
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

Problem with connecting and syncing (quicktime.qts)

Hi,
I have a problem with connecting and syncing my Iphone to itunes.
iphone alone on PC -> uploading files (fotos) is possible
itunes starts normaly, if iphone is not conected.
if i connect iphone after starting itunes, or if i start itunes after connecting iphone i get an itunes-error with message:
AppName: itunes.exe AppVer: 9.0.2.25 ModName: quicktime.qts
ModVer: 7.65.17.80 Offset: 00909a47
i test different things...
- used another USB-port
- used another PC
- used macbook of my wife instead PC
- deinstalled and new installed of itunes (older and newer versions) folow tutorials of apple
- use another USB-Cable...
I'm resigned, Please help me..
Tom

AppName: itunes.exe AppVer: 9.0.2.25 ModName: quicktime.qts
In this context, that can sometimes indicate trouble with a content file on the phone (or Touch).
Do you have any podcasts stored on the iPhone at the moment? If so, if you delete them from the phone, can you connect to iTunes without the error?

Problem with connection for ePrint

Hello,
today I brought a new printer - all in one, HP Deskjet INK Advantage 3520. All functions are OK, but i've a problem with ePrint.
Concretely, printer is connecting to my home wifi and I can print without USB cable without any problems. But when I want setup ePrint function, I get a error, that the printer haven't any internet connection and I can't finish configuration of service.
Does anyone know, how I can eliminate the problem?
Thank you,
Denis
This question was solved.
View Solution.

Hi DenyKr,
I see that you're having problems with your printer connecting to web services. I would try the steps below.
1. Open an internet browser type printer's IP address.
2. Should bring you to the printer's status page.
3. Select network tab at the top.
4. Left hand side select IPv4 under wireless.
5. Under DNS address Configuration select Manual DNS Server.
6. For Preferred enter 8.8.8.8
7. For Alternate enter 8.8.4.4
8. Select apply. You might get a warning saying this could interrupt connection that's fine.
9. Turn printer off for about 30 seconds then try again.
Let me know how it goes.

The problem with ALAssetsLibrary and Location Services

I have developed a photo app for the iPhone, released a couple of days ago, that's doing rather good in the App Store, but would probably do a lot better if it weren't for the negative reviews saying that they can't understand why the app wants access to Location Services to be able to select photos from the photo gallery.
The app lets users select photos from their gallery, which they then can style and edit in different ways. To do this I use the ALAssetsLibrary class. So far so good. The problem with the ALAssetsLibrary class is that if I wish to use it to access photos on the device, the user must give the app access to Location Services, as well. Why, you ask? Well, because photos in the gallery might possibly include information on when and where the photo was taken. If the user doesn't give the app access to Location Services, the app won't be able to access the photos at all.
In my app I'm not interested in the location services data at all - I just want the user to be able to select photos. But as far as I know there is just no way to read photos without Location Services enabled. As a developer I can sort of buy this limitation - because I understand why it exists - but apparently my users can not. And as a user myself I have to agree with them. Why on earth do they/I have to allow the app to access Location services for me to be able to select photos? It doesn't make sense!
At the moment I'm getting a lot of negative reviews saying "I downloaded and deleted. The app wants access to Location Services when I try to select a photo. This seems fishy. Don't download it". I agree. It DOES seem fishy, but I couldn't care less about their location data, and although I try to inform the user about this in the app, a lot of people doesn't seem to care, or understand why this is the way it is.
So, what's the point of this rant? Well, to start with, wouldn't it be better if iOS asked something like "This app needs access to your photos" instead of "This app needs access to your location", when using the ALAssetsLibrary?
Also, instead of using the ALAssetsLibrary I could have used the UIImagePickerController - if only it had supported landscape orientation. Why, why, WHY doesn't it? My app is landscape only, and therefore I had to build my own image picker functionality, instead of using the default one. Portrait only is a very stupid limitation, if you ask me.
Finally, is there SOME way at all to access the photos on the device without requiring Location Services as well?
Thank you for listening,
Andreas Lindahl
Rodskagg

Unfortunately, there is no way to directly access the photo library without prompting the user for Location Services permission. I just posted an article on my blog about this very issue (and referenced your post): http://blog.mikeswanson.com/post/18269837647/location-services. I hope that this situation can be improved in a future release of iOS.

Problem with connection and sessions

Hello,
I have some mobile user that connect to sap with a SAPCONSOLE in a server.
the problem is that when they move the loose the connection and when they try to connect again the sistem promps to keep the connection or cancelled the connection.
How can I avoid this, because in sm04 in some times I got 300 connection from the terminal and in tx session_manager.
Can somebody help us please.
Regards

In the regular part of the system (I'm not sure about the way you are describing) you can set this parm:
rdisp/max_alt_modes
in your instance profile. This prevents users from signing in over and over again and might help with your problem.

Problems with ShutdownHook and Windows Service

Hi friends,
I am facing a problem with the ShutdownHook when a Java program is run as a Windows Service. In the program I am having a Daemon Thread which will be run in an infinite while loop accoridng to a boolean variable. I have a shutdown hook also which sets the boolean variable so that the Daemon Thread will be stopped gracefully. When i am using Ctrl-C the shutdown Hook is started and the Thread is stopped gracefully.
Later i have made my program as a Windows Service using a utility Java Service Wrapper. But when i stop the service though the Services Window the ShutdownHook is not getting called. I was not able to fnd out why it is happening like that.
Any help will be highly appreciated. Thanks in advance.

Hi Drmetz
If you are waiting on a reply it could be some time, as this is the *Mac OS X v10.3 & earlier* forum and few here know about Windows, parallels MacBooks or the Tiger OS.
Mac's cover a wide field.
You could try reposting in this forum which would be your best best I think.
Windows Compatibility forum
http://discussions.apple.com/forum.jspa?forumID=687
also
MacBook forum
http://discussions.apple.com/category.jspa?categoryID=218
or even the Tiger Forum
http://discussions.apple.com/category.jspa?categoryID=160
Good luck,
regards roam

Business Connector problem with SSL and Web Services

Hi,
I have generated a Web Connector Service and tested this in our DEV and QA environment with http and no credentials.
All is fine.
I now switched to SSL and was provided with an https WSDL by our Web Server developers. The Web Connector service generates fine however as soon as I execute the service I get a NumberFormatException. Exact error is:
java.io.IOException:java.lang.NumberFormatException: null
The error occurs in pub.client:http
I traced through the working (in QA) and non-workinfg versions and checked the pipeline prior to the call and can see no different apart from the difference in protocol.
Does anyone have any idea what the cause is? I cannot determine what value is null.
Thanks
Brian

Hi,
I have generated a Web Connector Service and tested this in our DEV and QA environment with http and no credentials.
All is fine.
I now switched to SSL and was provided with an https WSDL by our Web Server developers. The Web Connector service generates fine however as soon as I execute the service I get a NumberFormatException. Exact error is:
java.io.IOException:java.lang.NumberFormatException: null
The error occurs in pub.client:http
I traced through the working (in QA) and non-workinfg versions and checked the pipeline prior to the call and can see no different apart from the difference in protocol.
Does anyone have any idea what the cause is? I cannot determine what value is null.
Thanks
Brian

Problem with Connection on Terminal Services

CR XI Pro VS 2005
I've got several reports in a .net application.
Connection data is initialised the usual way with a ConnectionInfo object.
On the client workstation a CRRedist2005_x86.msi is installed.
Everything is working fine.
But when I try to open a report while the application is running under Citrix nothing is happening for a long time - then a message box appears with textboxes for server, database, user and pwd. The first three are the correct entries from the conn-object, the pwd is empty.
When I try to enter the password, a MsgBox says: 'Authentification Error. Try again.'
I hope someone can help me out.

Hi Amit,
thanks for your reply.
I did install the SQLNativeClient on the server but nothing really changed. Afterwards I did deinstall the Redist-Utility AND my application and installed both of them new.
And now it works.
I really wonder why and what has been wrong before.
Regards
Hans-Christian

Problems with folders and Publishing Services

Hello,
i have the following problem since yesterday:
After opening LR I can open one folder or a folder in the publishing service (Harddrive). When I want to open another folder the problem pops up. The behaviour between the folder and the publishing services is different:
- folder: by clicking on another folder nothing happens, LR still displays the previous selected folder.
- publishing service: by clicking on a publishing service folder, the pictures of this folder are shown, but the meta data, tags etc are still the same one of the first selected picture after opening Lightroom.
Does anymone know a solution for it? I've also tried to optimize the database, to restart Lightroom and the computer, but nothing changes.
I am using Mac OS X, LR 5.2, German
Thanks in advanced.

Hello,
i have the following problem since yesterday:
After opening LR I can open one folder or a folder in the publishing service (Harddrive). When I want to open another folder the problem pops up. The behaviour between the folder and the publishing services is different:
- folder: by clicking on another folder nothing happens, LR still displays the previous selected folder.
- publishing service: by clicking on a publishing service folder, the pictures of this folder are shown, but the meta data, tags etc are still the same one of the first selected picture after opening Lightroom.
Does anymone know a solution for it? I've also tried to optimize the database, to restart Lightroom and the computer, but nothing changes.
I am using Mac OS X, LR 5.2, German
Thanks in advanced.

TS1538 problems with connection and sync on itunes

hello all, my iphone 3gs it's recognized on my computer but not on itunes, i've tried to restart the phone and reinstall itunes but it doesn't work, i've ran the sync test and it says it doesn't exist any iphone connected. please help ! thanks

Your other post has been answered.
Whatsapp and Facebook application not working at T...
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Problems when connecting and disconnecting MBP and TBD

Hello,
I have problems with connecting and disconnecting my macbook pro retina 13" to my thunderbolt display. Everytime I disconnect my MBP form my TBD with the lid closed it takes approximately 10 seconds until my MBP has recognized that the TBD is no longer connected and the MBP screens turns on.
On the other hand I also have a problem when I reconnect my MBP to my TBD. Approximately every second time my MBP does not recognize that the TBD is connected again and neither the MBP nor the TBD turns on. The small light on the power cabel of my TBD does not light up. It is as the TBD would'nt have any power. Pushing buttons on my Apple Bluethooth doesnt help. I have to disconnect and reconnect the thunderbolt and the power connector a coupl of times until the MBP finally recognizes the TBD and turns on. In some cases a different background picture is shown on the TBD than the one I usually have on my MBP.
The problem is very annoying especially because I connect and disconnect both devices and it really costs time.
I really hope there's someone who can help with the problem. Do you think this may be hardware problem of my MBP or TBD?
Thanks in advance for your help.

HI there,
The first thing I would recommend is checking for any new software updates while using the display, this will check for any available firmware updates for the display. If you continue to experience issues, then you may want to take a look at the article below for some further troubleshooting steps.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
-Griff W.

Problems with printer and network connectivity

So I've been using an HP B110a photosmart wireless e-all-in-one printer that I got with my macbook pro and at the start, everything worked perfectly in terms of wireless printing, ePrint, and AirPrint. But recently, when I try to print wirelessly, it says the printer is not connected and I also can't find it on the list of nearby printers on the 'add printer' window. I also had problems with printing via ePrint but those have cleared up (I don't know what was wrong but it's fine now). Printing with AirPrint on my iPod touch has stopped working as well because the printer doesn't show up when I search for nearby printers.
Here's what I've checked/tried so far:
All the wireless services are enabled on my printer and my mac
I've reset the printing system on my mac, printer settings to factory defaults
Restarted mac/printer/iPod
Restarted router
Reinstalled HP printing software that came with the printer
All software is up to date
Wireless printing on another windows computer does work
Setting up wireless printing using the HP install disc doesn't work
Trying to add a new printer using the HP software disc that came with the printer is unsuccessful in locating the printer as well.
Printing over USB is problem-free
When I tried restarting the printer/router, I could see the printer for just a few minutes in the 'add printer' list but then it would disappear from the list and the printer would be 'not connected' so I can't print wirelessly.
More info
MacBook Pro (13 inch, early 2011)
Mac OS X Lion (10.7.2)
HP Photosmart e-All-in-One B110a
Router is a Huawei HG556a that I got from Vodafone NZ
Thanks in advance!

http://support.apple.com/kb/DL907

How do I get connected to a server on my network via an IP address? When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?

I am new to Mac...How do I get connected to a server on my network via a hyper link IP address path? When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?

Some of the following is going to use some technical terms — this area is inherently somewhat technical.
If you don't understand some part of the following reply, please ask.
Is this your own OS X Server system on your own network, or is this some other server within some larger organization?
You're posting this in the OS X Server forum, which is a software package that allows OS X systems to provide web-based and many other services; to become servers.
If it's your OS X Server on your network, then the network and DNS configurations are suspect, or the server is somehow malfunctioning or misconfigured. This is unfortunately fairly common, as some folks do try to avoid setting up DNS services.
If it's a larger organization and somebody else is managing the server and the network, then you'll probably need to contact the IT folks for assistance; to learn the network setup and DNS requirements, and if there's a problem with the server itself.
The basic web URL "hyper link IP address path" — without using DNS — usually looks something the following, where you'll need to replace 10.20.30.40 with the IP address of your server:
http://10.20.30.40
UptimeJeff has posted a URL that specifies the AFP file system; an OS X file share. That's used if you're connecting to an Apple storage service somewhere on your network. You might alternatively need to specify smb://10.20.30.40 or such, if it's a Windows file server. (There can be additional requirements for connecting to Windows Server systems, too.)
If there's local IT staff available here, please contact them for assistance. If these are your own local systems and your own local OS X Server system, then some information on the server will be needed. (If you're on a NAT'd network, you'll also need to get DNS services configured and working on your local OS X Server system and your network — you'll not be able to skip this step and reference ISP DNS servers here — or things can and usually will get weird.)

Problem with provisioning and external SQL server connection

I am configuring IPAM 2012 R2 on a our management server. Completed the first step by enabling the feature. No issues.
Now I am on the Provisioning IPAM step. I get to the Configure Database step...
I choose Microsoft SQL server,
What should those values be in the Server name and Database name fields. Instructions show fqdn or ip address but that doesnt seem to be working for me.
I get the following error at the end of the Provisioning IPAM wizard,
IPAM Deployment failed with the following error.
Failed to connect to database server. Check the database name, connectivity and remote access.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.
(provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.)
You can restart this provisioning wizard from the IPAM overview page.
From the management server I have tested the SQL Connection with a udl file. I used myServer\myInstance and it works. It reports that I have made the Connection to the server and database with the sql credentials i have provided.
Thanks

Ran
into a problem with connecting to the DB on the SQL server from the IPAM server. The Dba and I checked the target SQL instance was enabled TCP and listening on a valid TCP port. SQL server was set to use port 1443 for incoming connections.
IPAM was set by default to use 1433.
Also used
netstat-n to identify issue and verified 1443 on SQL server was
being used. Made the correction under the IPAM provisioning wizard and connected to the database. Fixed.
Important note I was able to connect to the database with a .udlfile
without any issues
Also note that 2012 R2 IPAM only supports 2012 SQL Enterprise. Why?

HT204053 I have a problem. I bought Pages and Numbers for my iMac and so far everything was OK. Suddenly i have a problem with connection to iCloud. Dokuments created on iMac in Pages or Numbers are not transfered to iCloud. Not uploaded in iCloud.

I have a problem.
I bought Pages and Numbers for my iMac and so far everything was OK.
Suddenly i have a problem with connection to iCloud.
Dokuments created on iMac in Pages or Numbers are not transfered to iCloud. Not uploaded to iCloud. There is a sign (small shape of iCloud), that they are waiting to be uploaded to iCloud.
I think the iCloud is OK.
i can see and manage documents in iCloud. i can create them on iPad and see them and delete them in iCloud.
But not on iMac.
i dont know what has happened and I am not abble to find the solution. It was OK till some days ago….

I have a similar problem! Everything stopped working after upgrading to Mac OS 10.8.4 through the App Store. Help!

310a problems with connectivity and ePrint services

Similar Messages

Maybe you are looking for