310N Bridge question - extensive hook-up

Hello,
OK, I have a really extensive question(s) - and I will start with listing the equipment I am working with and my final goal.
I have the 310N Router
I added a Net Gear fast Ethernet switch
I have attempted to go from the Net Gear (via wire) to a Sherwood audio/video receiver, Seagate Home theater + , Samsung Blu-Ray BD4600, Dish Network VIP 612 DVR, Seagate Free Agent 1.2 TB (plugged into the DVR). To deal with the limited HDMI ports on the Sherwood I added a Rocket Switch (adds 2 HDMI ports) and then had to add a four (4) port HDMI switch.
I have Network magic to try and keep track of everything so I think I have the bases covered.
Now the following are the "problems" I'm having with the whole project.
My entire network is running under Windows Professional - opening Explorer I can see the two laptops, desktop, and printer when I view the Network section. All of the other equipment hanging off from the Net Gear switch is nowhere to be seen. Not seeing the Blu-Ray, DVR, Home Theater+ or Sherwood leaves me without being able to manage the equipment.
When I enter Network Magic I can see the laptops, desktop, printer attached to the desktop, Seagate Home Theater+, Dish Network VIP 612, and Samsung Blu-Ray BD4600. Clicking on the items attached to the Net Gear I can see the IP addresses and if the equipment is turned on or off BUT so far I can't access the DVR hard drive or the 1.2 TB on it, the Blu-Ray hard drive, or configure the Home Theater+ system via my network.
According to Dish Network the system is correctly attached and they are telling me I should be able to address both hard drives on the VIP 612. Samsung says I have the ethernet cable hooked up correctly and should be able to access the hard drive on it. The Seagate Home Theater+ works fine when accessing it through the TV remote control but even though Network magic sees the unit I can't access this either through my network.
So there it is, I did a ton of reading before adding the accessories to my entertainment system and it appeared that I could integrate all of these items but it's not working out very well.
Does anyone have any advise on how I can figure out why I can see the equipment but not able to control it through my 310N?
I'm open to any advise or suggestions.
Thanks,
Eskimoman

Hello,
Starting at the bottom of your advise from the bottom moving to the top here is what I have done:
I have searched the Windows setting from top to bottom and haven't found any setting that are blocking the display of attached devices. Maybe I am looking for something that isn't there but I expected when opening Explorer - Network, I would see all of the devices attached to the Network. I can see and attach to the other laptops, desktop, and printer within my network. I may have it all wrong but each of the devices I spoke of have their own IP address (except the NETGEAR hub) so I thought I would see it on Explorer.
As far as the Dish Network - I'm not 100% convinced that it does have a web browser built into the system as I understand a browser. When I think browser I think I can surf the web through the browser. With the DVR you are connected to Disk Network and ony them. DN (Dish Network) connects to there online site where you can add/delete program recordings, order pay-per-view, etc. The Segate Home Theater+ allows you to go to their proprietary site which offers a limited number of viewing options you can connect to i.e. uTube, etc.
Thank you for the information - I can see that I need to do a lot more reading as to how and harness the power (or lack of) of the devices I curently have within my home entertainment system.
Eskimoman

Similar Messages

I have question about hooking up an external hdd to a time capsule and still have my printer hooked up as well. Anyone got any tips for me, how to do it and what brand of harddrive that will work best for me 1 or 2 TB

i have question about hooking up an external hdd to a time capsule and still have my printer hooked up as well. Anyone got any tips for me, how to do it and what brand of harddrive that will work best for me 1 or 2 TB

You just need a powered hub.. if you already use one then fine.
Plug in just about any external hard disk will work fine. Format has to be readable by the TC.. ie fat32.. or much better HFS+.. plug it into a Mac to prepare the drive.
Pick whatever size suits.. nowadays 2TB are most economical.
WD, Seagate have goobled up all the minor players.. so pick one.
Whatever suits your budget and asthetics.
NOTE.. The USB on the TC is fine for printers.. IMHO it is the wrong way to go with USB disks.. use the internal disk of the TC.. USB is less than half the native speed plugged into a Mac.. TC to USB is slow.. far slower than internal drive.. or using external drive as external.

THE Bridge CC Extensions, so where is this folder to be found on a Windows 7 64?

Maybe I'm the ******* but each time lately it is something else, something new with CC, things are taken out put in another place, things are completely taken out, later added again by special downloads and you have to go and search for the right files to copy and paste files and so on and on and on.... I already lost several hours by each time researching the needed info, files,patches before I actually can do something!
Now I needed to make for school an assignment, a contact-sheet that we needed to export import Bridge-Photoshop to create a video-wall. In school we're on the CS6 where contactsheets and PDF, creating in Bridge no problem, now at home running on the CC i'm kinda fu...d, after some research i find following message,
for now I'm afraid you have to keep your Bridge CS6 on your computer and use it for generating contact sheets (on my Mac I have to close Bridge CC before I can use Bridge CS6).
- bad news: The Bridge CC online help says that in the current version the Adobe Output Module isn't available anymore and so it doesn't support generating contact sheets: "The functionality to create contact sheets, PDFs, and web galleries is available in Adobe Photoshop and Adobe Lightroom, which are included in your Creative Cloud subscription." Generating contact sheets from within Photoshop is a mess. It's not as comfortable like in Bridge CS5/6, results are not predictable and the time it takes is not acceptable. Using a still fast Mac Pro with 2 x 3 GB quad cores took more than one and a half hour to create contact sheets out of o folder with 140 files – Bridge did that in minutes. Let's hope for Adobe developers working on Bridge CC to make things easy!
After doin some further research i find this:
Install the Adobe Output Module
When Bridge CC shipped, it didn't include the Adobe Output Module, which allows you to create PDF presentations and web galleries. Adobe Output Module is now available for Bridge CC.
Make sure that you have the most recent version of Bridge CC installed. To check for updates, choose Help > Updates in Bridge. Follow the instructions to install any updates.
Download the appropriate file below by right-clicking (Windows) or Ctrl+clicking (Mac OS) and choosing to save the file. Save the file in a location you can remember, such as your Desktop.
So far no problem, following the instructions hoping my problem was solved,
Copy the Adobe Output Module folder (not the AOM_Package_[OS] folder) into the Bridge CC Extensions folder in the appropriate location:
Windows: C:\Program Files\Common Files\Adobe\Bridge CC Extensions
What do you think? Of course everything to be found in my file paths except of course the file i needed, THE Bridge CC Extensions, so where is this folder to be found on a Windows 7 64?
Added to make things clear a print screen of C:drive path....
So any idea how to resolve this problem would be very much appreciated. Cheers

Hi Ronald,
Sorry for the kinda late reply, busy days these days, lol but indeed somewhere i went wrong in the path. Went in search for the one you gave, progs-COMMON-Adobe and indeed correct. Thanks for the reply as the helping hand, cheers.

Trying to install AOM in Bridge CC but can't find the "Mac OS: /Library/Application Support/Adobe/Bridge CC Extensions" folder - where is it? Thank you!

After updating to 10.9.2 the Finder changed and I feel something is hiding - for example, I no longer seem to be able to "GET INFO" about my hardrive... only my drive and "my documents" etc... maybe this has something to do with not being able to find this folder: Mac OS: /Library/Application Support/Adobe/Bridge CC Extensions

Jeff... Yes. I meant to mark this solved - found another thread recommending using FINDER-GO TO- and /Library/Application Support/Adobe/Bridge CC Extensions.
It worked easy.
That little bit of info would be a great addition to that install AOM instructions.
Thank you for asking!

Want to install Output Module in Adobe Bridge CC on Mac OS X, Version 10.9.2, but in my Library hierarchy there is no folder "Adobe Bridge CC Extensions". Where install downloaded files?

Hello,
Unfortunately, the output module is not pre-installed in Adobe Bridge CC anymore. So I downloaded the files provided. These are supposed to be saved in the following folder: "Bridge CC Extensions". This is supposed to be under Library > Application Support > Adobe > Bridge CC. However, there is no such folder. Do I have to create it?
Thank you for a hint on what to do.
Best,
Heike

Thank you for a hint on what to do.
Check this thread and read the instructions of the download carefully. You have two libraries, one at system level and one at user level.
https://forums.adobe.com/thread/1299228

Bridge cc extensions

bridge output module isn't working after following the tutorial from: https://helpx.adobe.com/bridge/kb/install-output-module-bridge-cc.html#Possible%20issues
also I have no ''Bridge CC Extensions'' folder in my Adobe folder just an ''Bridge CC'' so it is a bit confusing. if you had a similar problem let me know, thank you!

This folder doesn't seem to exist. I'm also wondering where to put the download. There's an /Extensions Manager CC folder and a /Bridge CC folder, but not the one noted in the Adobe instructions.
It seem simple enough to drop the workspace file into the Workspaces folder within /Bridge CC, but there's a whole other folder that came in the download that seems like it needs a place to go. BUT WHERE?!

Mac OS10.8.3 and CS6 Bridge question

In CS 6, when I go to "File" > "Browse in Bridge" on the drop down menu, "Browse in Mini Bridge" is always highlighted in blue, along with "Import" and "Automate" and "Scripts". Other options including "Browse in Bridge" are available, but not highlighted in blue.
I have no clue why these options are highlighted as I never have used any of them in the other versions of PSCS I've used, as I much prefer just "Browse in Bridge". . Is there any way to remove the highlight on these options, (but NOT remove the options) ? It isn't a BIG deal, just annoying.
Hope someone can enlighten me ~
Thanks... Carolyn

Yes, you are right. This is more of a Photoshop question, and I appreciate your calling it to my attention. I did do as you suggested, but was unable to uncheck "What's New" in PS6. I tried a dozen times, and no matter what I do, it just won't uncheck.
I have actually posted this qustion on the dpreview.com Retouching Forum and Mac Forum, but yours is the first answe I've received in several days. So I appreciate your trying to help, and give you a "yes" for alerting me to my error in thinking it was a Bridge question.
Like I mentinoed, this is not a critical problem, just an annoying one. There are a LOT of options that are highlighted, but the one on "Mini Bridge' just hits me in the face everytime I get on PS and want to just "Browse in Bridge". It's like someone trying to make you buy something you don't want ! :-) I guess I'll just have to get used to it !
Thanks again for trying to help
Carolyn

I have a new pc and have installed (again) CS5, however I can not install the updates Adobe Bridge, Adobe Extension Manager, Adobe Photoshop (64 bit) and Potoshop Camera Raw.

I have a new pc and have again installed CS5 however and unfortunately I can not install the updates Adobe Bridge, Adobe extension Manager, Adobe Photoshop (64 bit) and Photoshop Camera Raw ?

Hi DerrylS,
I would request you to try the below mentioned link for Error U44M1P7:
http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
If problem still persist and as in log file it says "Exit code 7", kindly try below mentioned links.
Link 1: http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Link 2: http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html
Thanks!
Atul Saini

Missing Bridge CC Extensions Folder

I have Bridge CC installed and am trying to download and install the AOM Output Module extension. Per the instructions on the site I need to copy the folder to the Bridge CC Extensions Folder in my Library Folder, but there isn't one there! Any tips/advice/help? I can't get it to work without finding that folder it seems :-(

Hi,
I am having a problem with having the Output Module work as well.
According to the instructions I have done everything correctly. Install Adobe Output Module
I:
Copy the Adobe Output Module folder (not the AOM_Package_[OS] folder) into the Bridge CC Extensions folder in the appropriate location:Windows: C:\Program Files\Common Files\Adobe\Bridge CC Extensions
Copy the AdobeOutputModule.workspace file into the Workspaces folder under the Bridge CC Extensions folder.
When I place the AdobeOutputModule.workspace into the Workspace folder Bridge doesn't come up at all. If the Module is in the same folder as the BridgeCC folder then there is no change to whether Bridge works or not.
Additionally, I am not seeing "!!-$$$AdobeOutputModule.workspace" in the \Users\[user name]\AppData\Roaming\Adobe\Bridge CC\Workspaces folder. All I see are
!!-$$$Essentials.workspace
!!-$$$LightTable.workspace
!!-$$$Navigator.workspace and
!!LastMenu.workspace
Help please. Any more ideas.
Thank you,

No bridge forum for a bridge question (??)

I have a bridge question so if this is not the right place please send it to wherever moderators
Is it possible to run/have/use/purchase bridge without photoshop? Cost of ? (link)
I have PSE12 and don't need the big brother PS programs .... more like big sister PS programs.......but I would like have bridge again. I also have LR5 and would like bridge for couple things windows can't do
Cheers

Hi there, Heidi --
Just go to your OS Forum . . .
In your case Leopard.
Click below to get there:
http://discussions.apple.com/forum.jspa?forumID=1225
Hope this helps.

Adobe Bridge question...

I have a question about Adobe Bridge...
When I make changes to a Photoshop image’s description, under File info, Adobe Bridge will not recognize the changes and the new words do not come up in a search. Why is that?

Click on the link below to go to the Bridge forum:
Bridge Macintosh

Adobe Bridge and Extension Manager missing products

I installed Production Premium, yet Adobe Bridge will not preview After Effects Presets. When selecting Manage Extensions, the Adobe Extension Manager does not show After Effects as a product.
How can I fix this?

Nevermind :-) Fix this moments later. I had noticed After Effects would start with an error about quick time not being installed. (new OS). After I installed that it works fine. I guess Bridge uses Quicktime to preview the presets because after restarting bridge it works fine.
Thanks

Question RE: hooking up MBP to a 22' LCD

so i have a 22' LCD monitor i want to hook up to my MBP, but the question i have is this: is there a way to keep the notebook closed and still turn on/off the computer?
i would like to have the MBP connected to the monitor and not have to open the MBP to turn it on then close it up etc
thanks!

Hi - I just gave this answer to someone else so sorry for the copy and paste:
Hi - I have a Macbook (Pro is on order!!) and so cannot be 100% sure that the method is the same but.
- Make sure you are connected to an external keyboard and mouse and all is working as it should.
- Close the MBP's lid
At this point it will go into standy. Wait a few secs (perhaps 10 - 30) for it to settle into standby and then hit Enter on your keyboard and/or left click your mouse. At this point it should start up again using the external monitor only.
Hope this helps.

Weblogic Messaging Bridge Question

          I am using the Weblogic Messaging Bridge and I have a question regarding Transactions.
          I am using the bridge to integrate MQ Series with Weblogic JMS.
          If I want to send messages over the the bridge and have it wrapped in a transaction
          do I wrap my code where I send the message across on the Queue within a User Transaction
          or do I wrap it in a Global Transaction?


Anuj,
          In your situation, if I remember correctly, use a JTA transaction to post
          the message to WL queue. Make sure that the bridge is configured with XA
          connection factory to move the message to MQ. The bridge will start an
          internal transaction and synchronously move messages to MQ and then it's
          upto your adapter code to dequue the message from MQ within transaction.
          On the receiving side, the adapter would put the message in MQ
          (transationally if you prefer), the bridge would move the message to WL
          destination within a transaction (assuming it is configured correctly). You
          could then use a MDB with container transaction to dequeue the message and
          invoke your business logic.
          Feel free to send me an email if you have further questions. You can also
          contact Helen. I am on the road, so I would not have access to my emails
          until I get back to the hotel.
          Once you are ready to move to 7.0 we could come back and see what hop can we
          remove.
          Hope this helps.
          .raja
          "Anuj Mehta" <[email protected]> wrote in message
          news:[email protected]...
          >
          > I am using the Weblogic Messaging Bridge and I have a question regarding
          Transactions.
          >
          > I am using the bridge to integrate MQ Series with Weblogic JMS.
          > If I want to send messages over the the bridge and have it wrapped in a
          transaction
          > do I wrap my code where I send the message across on the Queue within a
          User Transaction
          > or do I wrap it in a Global Transaction?
          >
          >

Question on hooking time capsule up.

I am looking to buy a time capsule, but first need to know a couple things, so anyone who could help me I would gladly appreciate it. First question: I currently have a modem and a wireless router hooked up at my house, which runs fine. I was just wondering if the time capsule will detect the wireless router without being hooked up to the modem or router by a wire/chord? I'm just looking to use the time capsule for the wireless hard drive purpose and that is it, I don't need to set up a new network or anything. I have broken many portable hard drives because they were hooked in my laptop and without thinking picked up and moved my laptop and the portable falls and hits the ground. I want the time capsule because of no chords and it will remain in one place.

I guess, I should just call apple. Don't know who to trust.
Please call Apple. They will vouch for me. Level 9 might be a clue.
TeHPwN has a way to go........about 8 years.

310N Bridge question - extensive hook-up

Similar Messages

Maybe you are looking for