3110 Classic won't connect with my PC

I'm having problems with my 3110. Whenever I plug it in under USB mode, it gets detected by my PC an I can store files into it. But when I use Nokia Mode so that I can use the PC suite, my PC can not detect it. I'm using a USB data cable for both but it can only be detected as a USB drive and not as a phone under Nokia mode. I'm using the latest PC suite version.
Can anyone help me out? I got a 2gb card and I can't fill it up with songs and videos coz it wont synch with the PC.
Help will be much appreciated.
Thanks!

Thanks to everyone who replied. It's been awhile since I viewed this forum.
Scoobyman: Yeah, it was a clean install and still it won't connect. I was really bummed out that Nokia would release a product with connectivity issues. But still, at least I could use it as a USB drive to do some stuff. Although, it won't upload videos... Only mp3s and other documents.
Gleno: Yeah, that's what I did... I think I filled it up with 1.5gb already. At least that worked. Now I have music on my phone!
Miksu: Sorry man, I have that version and it won't work... Thanks for the help though.
Europlus: Man, you are lucky! I am using a 2gb memory card and maybe that's the problem? Although it plays my mp3's fine with no skip or lag and all of my files appear intact when I use it as a USB drive.
Ddeian: I think you're having a worse time than I am... Hopefully someone can have a fix for this.
Thanks guys! As for Nokia, I hope they have a fix for this. It's a good, cheap, and hardy phone. I don't want it to waste it's sturdy hardware only to fall short on the software support. Still, I love the phone and would probably be using it for quite some time.

Similar Messages

Ipod classic won't connect with PC unless reset

Everytime I conect my Ipod to my windows 7 pc it does not appear in the iTunes list as connected devices, the iPod screen also does not recognise the PC when connected via USB. Reset the Ipod and it wil then connect as normal. A reset needs to be done everytime I want to sync.

A typical case of Antivirus intervention.
Antivirus has a tendency to freeze iTunes sync Operation with Ipod Classic, causing a timeout, which corrupt your iPod filesystem, so when iTunes cant read the iPod, it is pointing to this problem. Other causes is when your iPod hardisk is dying, or your battery is dying causing hardisk crashes.
My suggestion.
Connect your Ipod to the PC and run chkdsk, to fix any iPod diskerror, then disconnect it, after chkdsk complete.
Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
Stop the Antivirus program
Connect your Ipod to the PC
When Itunes Open up, Restore your iPod please, this is for iTunes to map correctly, to fix the corrupted filesystem.
When Restore complete, eject the iPod and reconnect again.
Sync your ipod, preferably manually Manage in small batches and disconnect after every batch, to check that all is well, since you got such a huge library.
When all sync is complete, and iPod disconnected, start back your Antivirus and connect back the Internet.
Good Luck! and have a Nice Day!

Tried to update to newest version. I got error because i didn't have this recovery program disc that was supposed to come with the purchase but it didn't and now my ipod touch 8gb won't connect with itunes and is stuck on a connection with itunes screen

I tried to update to newest version via pc. I got error because i didn't have this recovery program disc that was supposed to come with the purchase so it says, but it didn't and now my ipod touch 8gb won't connect with itunes anymore and is stuck on a screen displaying an itunes icon with a usb icon.

oke i'm not done with the whole thing, but i'm doing that right now. Most of the advice I've already read didn't work and at a certain point it said something about shutting down programs then restart. but i notice that there are some pretty important system things in that list and i don't want to mess up my pc :s i'm not a pc genius... and because i'm dutch and my pc-language is in dutch I often have trouble translating and well... i don't always understand the technical stuff in all the articles -_-

After lion 10.7.3 update messed my mac had to restore from time machine now Outlook won't connect with microsoft exchange, any idea?

after lion 10.7.3 update messed my mac had to restore from time machine now Outlook won't connect with microsoft exchange, any idea?

I've had a similar problem. On my first boot up after installing 10.7.4, Firefox would not open. Crashed every time. Safari was not affected. I have no idea if it was related to the flash plugin, but I did install a the latest version of that a couple of weeks ago.
Here's what fixed it: a second boot up.

IPod Classic won't connect - need to restore. What do I do?

I installed the latest iTunes onto my laptop (Windows 8), and now my iPod Classic won't connect to my laptop or iTunes. It's also telling me I need to connect to iTunes to restore it. I can't connect it to iTunes.
When I plug in the USB cord, It starts the iPod in Disk Mode - still no connection. What do I do?!

Hi DanielleGuise!
It sounds like your iTunes installation is not recognizing that your iPod is plugged in, so you will need to address that issue before you can restore the iPod. Here is an article that will help you do this:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Deskjet Advantage 3540 (Envy 4500): Computer won't connect with printer during software installation

I just bought this printer and I am trying to install it by using the HP installation CD but I am running into difficulties to complete the process. The problem is that the computer won't connect with the printer (but my printer connects fine with my Wi-Fi network) and installation does not complete.
The HP software installation process appears to go normally (at least no error messages are shown) but when it gets to the part where it asks me how I would like to connect to the printer (Wireless or USB cable) I get an error message when I select Wireless Mode. My printer appears listed but as soon as I select it, a dialog is shown stating that "network installation could not be performed".
Below are the dialogs and what happens (text is in portuguese but you get the idea)
Dialog 1: selecting wireless connection mode
Dialog 2: printer appears in list and I select it
Dialog 3: Error message is shown, no further details
Here are some more facts:
(1) Printer connect fines with my Wi-Fi network: the connection details are correctly shown in its display (Wi-Fi SSID and IP 192.168.0.6) ;
(2) If I go to a web browser in my computer and type in the IP address, I can access the printer's webpage fine;
(3) I've tried uninstalling and reinstalling HP software;
(4) I've resetted my router;
(5) I've executed "HP Print and Scan Doctor" utility and it states my software hasn't been installed (which I don't understand) and it tries to download HP software and install one more time and I get to the error.
(6) If I go to "Start" menu, I can see the HP group is empty (installation only creates icons on my desktop). See picture below:
My OS is Windows 7 64 bit Ultimate (Service Pack 1)
EDIT: I've just discovered the inkjet Advantage 3540 and Envy 4500 appear to be the same printer, each target to a different market.
Help is much appreciated as I tried a lot of things to make this printer work wirelessly with my computer but without success.
Thank you,
Joao Pedro

Hi JoaoPedro,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
Sorry to hear that you are having installation issues.
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Thank you for your time
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

I just installed Airport Extreme. It works as a wireless network on my Macbook. It won't connect with my Windows Visa PC. Message reads: "settings saved on this computer for the network don't match requirements of the network.

I just installed Airport Extreme. It works as a wireless network on my Macbook. It won't connect with my Windows Visa PC. Message reads: "settings saved on this computer for the network don't match requirements of the network." I seem to need to enter a security key/passphrase to connect to the PC. Where do I find them?
Thanks for your help.

I assume that you have Wireless Security enabled on your AirPort's wireless network. The issue maybe that the PC is unable to use the WPA password itself and will require using the Equivalent Network Password instead.
To get this password, you will use the AirPort Utility from the MacBook:
Start the AirPort Utility > Select the AirPort base station > Manual Setup
Now, before doing anything else, go up to the utility's menu bar at the top of the screen, and then, choose "Base Station," and then, Equivalent Network Password from the drop-down menu. You will see two items: 1) WPA Password, which should look familiar to you, and 2) WPA Pre-Shared Key. It should be a long hexidecimal set of numbers and letters. Jot down this second item.
You will want to use the value you just jotted down when entering the password from the Windows Visa PC.

Microsoft Exchange won't connect with my iPhone (it's saying the password is incorrect, but it shouldn't be), now I can't delete that inbox on the phone. Help??

Microsoft Exchange won't connect with my iPhone (it's saying the password is incorrect, but it shouldn't be), now I can't delete that inbox on the phone. Help??

Turn off wifi. Use wireless signal. reenter password at settings. This should work. Turn wifi back on if you wish. Wait for next occurrence within hours or days. Have not found a permanent preventive solution. Thinking of replacing my four year old wireless router.

My iPhone won't connect with my computer or charge. How can I fix this?

My iPhone won't connect with my computer. It also will not charge. I changed the white charging cord, but I have the same problem. I connected other devices to the USB and they work. It's strictly the iPhone.
How can I correct this?

I forgot to mention, the iPhone does charge via wall plug.

IPod Classic Won't Connect to Computer or iTunes

My iPod Classic 160GB started to stop showing up both in Finder and on iTunes a few weeks ago. If I connect it to a wall charger then it will still charge, so I'm fairly sure it's not a problem with the cable dock or anything. I've literally tried every suggestion I could find, but nothing has worked so far. The iPod still plays music fine, but it won't sync with iTunes or show up at all in Finder.
I've already tried resetting it (both while connected to the computer and not) and switching USB ports (it didn't work on another computer's USB ports either). I've tried everything listed on Apple's recommended solutions to this problem. I'm mostly resigned to having to get a new device, but I wanted to check and see if anyone else had any other possible solutions. Once again, I have tried all the basic troubleshooting problems, so please don't give me those. I would appreciate any help you guys can offer, thanks!

I have this problem too please help.

Nokia 3110 Classic does not work with Peltor Bluet...

Hi!
At work I must use a high quality hearing protection headset. I purchased a Peltor Bluetooth A2DP headset (which costs five times the price of the phone) and a Nokia 3110 Classic phone, which would have been a good phone if it had worked properly with the headset. The phone fails to initialize Bluetooth connection almost every time I switch the headset on. When the initialization goes right, then it usually works, but sometimes I can only use A2DP music or phone. Both cannot be used, the other function remains silent. Sometimes the music palyer software jams after bluetooth initialization so that I have to restart the phone and load factory settings. I have installed the most recent firmware to the phone.
The headset works OK with other Nokia models I have tried. Are there any new firmware updates coming which could solve these bluetooth problems?
Thanks,
Mika

I also bought a Peltor bluetooth headset. I used it with 2 different phones (n73 and n96) and had problems with the connection on both phones. For example every time I turned off the headset, I had to pair the devices again. I also have used several other bluetooth headsets with absolutey no problems. So I assumed the problem was on the Peltor headset and sent it for service. I hope it will start to work.

What do I need to buy in order for my iPod Classic 160GB to connect with my blue tooth speaker

What do I need to buy in order for my IPod Classic 160 GB to connect with my blue tooth Ultimate Ears Boom speaker?

Upgrading RAM and your HD will give you some performance gains, but depending on what you are doing, it may not be enough. Your best friend will always be processor speed. This has a direct relation to how many cores and the speed of the RAM.
However, if you are unable to spring for a new computer, then the options of running more RAM and a biggger, faster HD should ruduce some bottle necks.
Here is a site where you can check out what your computer can handle http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade They have some charts comparing speed gains with various components.
Are you using the track freeze option to manage the track count and subsequent demands on your machine?

What to do when your Game Center won't connect with the game?

My game center won't connect to the game I'm trying to play and what is happing is the game would come one. But when its loading it will stop right in the middle of it and won't do anything. I don't know if its the game or game center. I believe its the game center because it doesn't open the apps inside of it on the first page. What should i do?

Hey GarretTAT!
Here is an article that will help you troubleshoot this issue with Game Center:
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/ts3970
Thanks for using the Apple Support Communities!
Cheers,
Braden

Tablet won't connect with static LAN IP address

Today I updated my Xperia tablet (model SGP311) to Android 4.4.2 (kernel version 3.4.0-perf-g32ce454).
My tablet no longer connects to my home wi-fi network if I assign it a static LAN IP address. It connects fine if I use DHCP. But I prefer to assign my devices static IP addresses when possible.
I have tried forgetting and re-connecting to my LAN several times without success. The static IP address worked fine until today's update.
Any ideas?

sunnhausl wrote:
I tried that already, too! New development...I have the same problem in my office now. So, clearly, it is a problem with my iTouch. It recognizes the networks, won't connect, and when I go into look at the network, there is not data (IP address, etc.) It's just blank. HELP!
You could try restoring the S/W on your iPod Touch. If that doesn't work you may need to talk to Apple about repair.

Ipod Classic Won't connect

My Ipod classic will not connect iTunes? And every time I do connect it stops Itunes from Working?

I'm assuming you are using firmware 1.1 on the iPod, you might check with your BMW dealer and see if there is a software upgrade for your BMW that will correct the issue. The 1.0.3 upgrade fixed the connection on my BMW, but I have the post March 2007 iPod connection.

3110 Classic won't connect with my PC

Similar Messages

Maybe you are looking for